Deploy the ASA Virtual on Google Cloud Platform

You can deploy the ASA virtual on the Google Cloud Platform (GCP).

Overview

GCP lets you build, deploy, and scale applications, websites, and services on the same infrastructure as Google.

The ASA virtual runs the same software as physical ASAs to deliver proven security functionality in a virtual form factor. The ASA virtual can be deployed in the public GCP. It can then be configured to protect virtual and physical data center workloads that expand, contract, or shift their location over time.

GCP Machine Type Support

Select the Google virtual machine type and size to meet your ASA virtual needs.

The ASA virtual supports the following General-purpose NI, N2 and Compute-optimized C2 GCP machine types:

Table 1. Supported Compute-Optimized Machine Types

Compute-Optimized Machine Types

Attributes

vCPUs

Memory (GB)

c2-standard-4

4

16

c2-standard-8

8

32

c2-standard-16

16

64
Table 2. Supported General Purpose Machine Types

Machine Type

Attributes

vCPUs

Memory (GB)

n1-standard-4

4

15

n1-standard-8

8

30

n1-standard-16

16

60

n2-standard-4

4

16

n2-standard-8

8

32

n2-standard-16

16

64

n1-highcpu-16

16

14.4

n2-highcpu-16

16

16

n2-highmem-4

4

32

n2-highmem-8

8

64

  • The ASA virtual requires a minimum of 3 interfaces.

  • The maximum supported vCPUs is 16.

  • The Memory-Optimized machine type is not supported

You create an account on GCP, launch an ASA virtual instance using the ASA virtual firewall (ASA virtual) offering on the GCP Marketplace, and choose a GCP machine type.

C2 Compute-Optimized Machine Type Limitations

The Compute-Optimized C2 machine types have the following restrictions:

  • You cannot use regional persistent disks with compute-optimized machine types. For more information, see the Google documentation Adding or resizing regional persistent disks.

  • Subject to different disk limits than general-purpose and memory-optimized machine types. For more information, see the Google documentation Block storage performance.

  • Available only in select zones and regions. For more information, see the Google documentation Available regions and zones.

  • Available only on select CPU platforms. For more information, see the Google documentation CPU platforms.

Performance Tiers for ASA virtual

The ASA virtual supports performance-tiered licensing that provides different throughput levels and VPN connection limits based on deployment requirements.

Performance Tier

Instance Type (Core/RAM)

Rate Limit

RA VPN Session Limit

ASAv5

c2-standard-4

4 core/16 GB

100 Mbps

50

ASAv10

c2-standard-4

4 core/16 GB

1 Gbps

250

ASAv30

c2-standard-4

4 core/16 GB

2 Gbps

750

ASAv50

c2-standard-8

8 core/32 GB

7.6 Gbps

10,000

ASAv100

c2-standard-16

16 core/64 GB

16 Gbps

20,000

Prerequisites

  • Create a GCP account at https://cloud.google.com.

  • Create your GCP project. See the Google documentation, Creating Your Project.

  • License the ASA virtual. Until you license the ASA virtual, it will run in degraded mode, which allows only 100 connections and throughput of 100 Kbps. See Licenses: Smart Software Licensing.

  • Interface requirements:

    • Management interface—Used to connect the ASA virtual to the ASDM; can’t be used for through traffic.

    • Inside interface—Used to connect the ASA virtual to inside hosts.

    • Outside interface—Used to connect the ASA virtual to the public network.

  • Communications paths:

    • Public IPs for access into the ASA virtual.

  • For ASA virtual system requirements, see Cisco Secure Firewall ASA Compatibility.

Guidelines and Limitations

Supported Features

The ASA virtual on GCP supports the following features:

  • Deployment in the GCP Virtual Private Cloud (VPC)

  • Maximum of 16 vCPUs per instance

  • Routed mode (default)

  • Licensing – Only BYOL is supported

Unsupported Features

The ASA virtual on GCP does not support the following:

  • IPv6

    • Instance-level IPv6 setting is not supported on GCP

    • Only the load balancer can accept IPv6 connections, and proxy them over IPv4 to GCP Instances

  • Jumbo Frames

  • ASA virtual native HA

  • Autoscale

  • Transparent/inline/passive modes

Sample Network Topology

The following figure shows the recommended network topology for the ASA virtual in Routed Firewall Mode with 3 subnets configured in GCP for the ASA virtual (management, inside, and outside).

Figure 1. Sample ASA Virtual on GCP Deployment

Deploy the ASA Virtual on Google Cloud Platform

You can deploy the ASA virtual on the Google Cloud Platform (GCP).

Create VPC Networks

Before you begin

The ASA virtual deployment requires three networks which you must create prior to deploying the ASA virtual. The networks are as follows:

  • Management VPC for the management subnet.

  • Inside VPC for the inside subnet.

  • Outside VPC for the outside subnet.

Additionally, you set up the route tables and GCP firewall rules to allow traffic flow through the ASA virtual. The route tables and firewall rules are separate from those that are configured on the ASA virtual itself. Name the GCP route tables and firewall rules according to associated network and functionality. See Sample Network Topology.

Procedure

Step 1

In the GCP console, choose Networking > VPC network > VPC networks , then click Create VPC Network.

Step 2

In the Name field, enter the descriptive name for your VPC network, for example, vpc-asiasouth-mgmt.

Step 3

From the Subnet creation mode, click Custom.

Step 4

In the Name field under New subnet, enter the desired name, for example, vpc-asiasouth-mgmt.

Step 5

From the Region drop-down list, select the region appropriate for your deployment. All three networks must be in the same region.

Step 6

In the IP address range field, enter the first network's subnet in CIDR format, such as 10.10.0.0/24.

Step 7

Accept the defaults for all other settings, then click Create.

Step 8

Repeat steps 1-7 to create the remaining two networks in your VPC.

Create the Firewall Rules

You apply the firewall rules for the management interface (to allow SSH and HTTPS connections) while deploying the ASA virtual instance, see Create the ASA Virtual Instance on GCP. According to your requirements, you can also create firewall rules for the inside and outside interfaces.

Procedure

Step 1

In the GCP console, choose Networking > VPC network > Firewall, then click Create Firewall Rule.

Step 2

In the Name field, enter a descriptive name for your firewall rule, for example, vpc-asiasouth-inside-fwrule.

Step 3

From the Network drop-down list, select the name of the VPC network for which you are creating the firewall rule, for example, asav-south-inside.

Step 4

From the Targets drop-down list, select the option applicable for your firewall rule, for example, All instances in the network.

Step 5

In the Source IP ranges field, enter the source IP address ranges in CIDR format, for example, 0.0.0.0/0.

Traffic is only allowed from sources within these IP address ranges.

Step 6

Under Protocols and ports, select Specified protocols and ports.

Step 7

Add your security rules.

Step 8

Click Create.

Create the ASA Virtual Instance on GCP

Complete the following steps to deploy an ASA virtual instance using the Cisco ASA virtual firewall (ASA virtual) offering from the GCP Marketplace.

Procedure

Step 1

Log into to the GCP Console.

Step 2

Click Navigation menu > Marketplace.

Step 3

Search the Marketplace for “Cisco ASA virtual firewall (ASAv)” and choose the offering.

Step 4

Click Launch.

Step 5

Add a unique Deployment name for the instance.

Step 6

Select the Zone where you want to deploy the ASA virtual.

Step 7

Select the appropriate Machine type. For a list of supported machine types, see Overview.

Step 8

(Optional) Paste the public key from the SSH key pair under SSH key (optional).

The key pair consists of a public key that GCP stores and a private key file that the user stores. Together they allow you to connect to your instance securely. Be sure to save the key pair to a known location, as it will be required to connect to the instance.

Step 9

Choose whether to allow or block the project-wide SSH keys to access this instance. See the Google documentation Allowing or blocking project-wide public SSH keys from a Linux instance.

Step 10

(Optional) Under Startup script, provide the day0 configuration for your ASA virtual. The day0 configuration is applied during the firstboot of the ASA virtual.

The following example shows a sample day0 configuration you can copy and paste in the Startup script field:

See the ASA Configuration Guides and the ASA Command Reference for complete information on the ASA commands.

Important

 

When you copy text from this example, you should validate the script in a third-party text editor or validation engine to prevent format errors and remove invalid Unicode characters. 


!ASA Version 9.15.1 
 
interface management0/0
 
management-only
nameif management
security-level 100
ip address dhcp setroute
no shut
!
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
!
crypto key generate rsa modulus 2048
ssh 0 0 management
ssh timeout 60
ssh version 2
username admin password cisco123 privilege 15
username admin attributes
service-type admin
! required config end
dns domain-lookup management
dns server-group DefaultDNS
name-server 8.8.8.8

Step 11

Keep the default Boot disk type and Boot disk size in GB for the provisioned disk space.

Step 12

Configure the interfaces under Network interfaces.

  • management

  • inside

  • outside

Note

 

You cannot add interfaces to an instance after you create it. If you create the instance with an improper interface configuration, you must delete the instance and recreate it with the proper interface configuration.

  1. From the Network drop-down list, select a VPC network, for example, vpc-asiasouth-mgmt.

  2. From the External IP drop-down list, select the appropriate option.

    For the management interface, select the External IP to Ephemeral. This is optional for inside and outside interfaces.

  3. Click Done.

Step 13

Apply the firewall rules under Firewall.

  • Check the Allow TCP port 22 traffic from the Internet (SSH access) check box to allow SSH.

  • Check the Allow HTTPS traffic from the Internet (ASDM access) check box to allow HTTPS connections.

Step 14

Click More to expand the view and make sure that IP Forwarding is set to On.

Step 15

Click Deploy.

View the instance details from the VM instance page of the GCP console. You’ll find the internal IP address, external IP address, and controls to stop and start the instance. You need to stop the instance if you need to edit it.

Access the ASA Virtual Instance on GCP

Make sure that you have already enabled a firewall rule to allow SSH (TCP connections through port 22) during deployment. See Create the ASA Virtual Instance on GCP for more information.

This firewall rule enables access to the ASA virtual instance and allows you to connect to the instance using the following methods.

  • External IP

    • Any other SSH client or third-party tools

  • Serial console

  • Gcloud command line

See the Google documentation, Connecting to instances for more information.


Note

You can log in to the ASA virtual instance using the credentials specified in the day0 configuration, or by using the SSH key pair you created during the instance launch.

Connect to the ASA Virtual Instance Using an External IP

The ASA virtual instance is assigned with an internal IP and an external IP. You can use the external IP to access the ASA virtual instance.

Procedure

Step 1

In the GCP console, choose Compute Engine > VM instances.

Step 2

Click the ASA virtual instance name to open the VM instance details page.

Step 3

Under the Details tab, click the drop-down menu for the SSH field.

Step 4

Select the desired option from the SSH drop-down menu.

You can connect to the ASA virtual instance using the following method.

Note

 
You can log in to the ASA virtual instance using the credentials specified in the day0 configuration, or by using the SSH key pair you created during the instance launch.

Connect to the ASA Virtual Instance Using SSH

To connect to the ASA virtual instance from a Unix-style system, log in to the instance using SSH.

Procedure

Step 1

Use the following command to set the file permissions so that only you can read the file:

$ chmod 400 <private_key>

Where:

<private_key> is the full path and name of the file that contains the private key associated with the instance you want to access.

Step 2

Use the following SSH command to access the instance.

$ ssh –i <private_key> <username>@<public-ip-address>

Where:

<private_key> is the full path and name of the file that contains the private key associated with the instance you want to access.

<username> is the username for the ASA virtual instance.

<public-ip-address> is your instance IP address that you retrieved from the Console.

<ipv6-address> is your instance management interface IPv6 address.

Connect to the ASA Virtual Instance Using the Serial Console

Procedure

Step 1

In the GCP console, choose Compute Engine > VM instances.

Step 2

Click the ASA virtual instance name to open the VM instance details page.

Step 3

Under the Details tab, click Connect to serial console.

See the Google documentation, Interacting with the serial console for more information.

Connect to the ASA Virtual Instance Using Gcloud

Procedure

Step 1

In the GCP console, choose Compute Engine > VM instances.

Step 2

Click the ASA virtual instance name to open the VM instance details page.

Step 3

Under the Details tab, click the drop-down menu for the SSH field.

Step 4

Click View gcloud command > Run in Cloud Shell.

The Cloud Shell terminal window opens. See the Google documentation, gcloud command-line tool overview, and gcloud compute ssh for more information.

CPU Usage and Reporting

The CPU Utilization report summarizes the percentage of the CPU used within the time specified. Typically, the Core operates on approximately 30 to 40 percent of total CPU capacity during nonpeak hours and approximately 60 to 70 percent capacity during peak hours.

vCPU Usage in the ASA Virtual

The ASA virtual vCPU usage shows the amount of vCPUs used for the data path, control point, and external processes.

The GCP reported vCPU usage includes the ASA virtual usage as described:

  • ASA Virtual idle time

  • %SYS overhead used for the ASA virtual machine

  • Overhead of moving packets between vSwitches, vNICs, and pNICs. This overhead can be quite significant.

CPU Usage Example

The show cpu usage command can be used to display CPU utilization statistics.

Example

Ciscoasa#show cpu usage

CPU utilization for 5 seconds = 1%; 1 minute: 2%; 5 minutes: 1%

The following is an example in which the reported vCPU usage is substantially different:

  • ASA Virtual reports: 40%

  • DP: 35%

  • External Processes: 5%

  • ASA (as ASA Virtual reports): 40%

  • ASA idle polling: 10%

  • Overhead: 45%

The overhead is used to perform hypervisor functions and to move packets between NICs and vNICs using the vSwitch.

GCP CPU Usage Reporting

Click the instance name on GCP Console and then click on the tab Monitoring. You will be able to see the CPU usage percentage.

Compute Engine lets you export detailed reports of your Compute Engine usage to a Google Cloud Storage bucket using the usage export feature. Usage reports provide information about the lifetime of your resources. For example, you can see how many VM instances in your project are running an n2-standard-4 machine type and how long each instance has been running. You can also review the storage space of a persistent disk, and information about other Compute Engine features.

ASA Virtual and GCP Graphs

There are differences in the CPU % numbers between the ASA Virtual and GCP:

  • The GCP graph numbers are always higher than the ASA Virtual numbers.

  • GCP calls it %CPU usage; the ASA Virtual calls it %CPU utilization.

The terms “%CPU utilization” and “%CPU usage” mean different things:

  • CPU utilization provides statistics for physical CPUs.

  • CPU usage provides statistics for logical CPUs, which is based on CPU hyperthreading. But because only one vCPU is used, hyperthreading is not turned on.

GCP calculates the CPU % usage as follows:

Amount of actively used virtual CPUs, specified as a percentage of the total available CPUs

This calculation is the host view of the CPU usage, not the guest operating system view, and is the average CPU utilization over all available virtual CPUs in the virtual machine.

For example, if a virtual machine with one virtual CPU is running on a host that has four physical CPUs and the CPU usage is 100%, the virtual machine is using one physical CPU completely. The virtual CPU usage calculation is Usage in MHz / number of virtual CPUs x core frequency