Unpacking the Router

This section includes instructions about how to unpack the Cisco 1240 Connected Grid Router and describes the items that ship with the router.

These topics are discussed:

blank.gifUnpacking the Router

blank.gifRouter Package Contents

Unpacking the Router

Tip: When you unpack the router, do not remove the foam blocks attached to antennas and antenna connectors. The foam protects the antennas and connectors during installation.

To unpack the router:

1.blank.gif Open the shipping container and carefully remove the contents.

2.blank.gif Return all packing material to the shipping container, and save it.

3.blank.gif Ensure that all items listed in the Router Package Contents are included in the shipment. If any item is damaged or missing, notify your authorized Cisco sales representative.

Router Package Contents

Your router kit contains the items listed in Table 1.

Note: Some items are optional and might not be included with the router if they were not ordered with the router.

 

Table 1 Cisco 1240 Connected Grid Router Package Contents

Qty.
Item
Description

1

Cisco CGR 1240

Router enclosure, with the following components installed:

blank.gifConnected Grid Modules (1 to 4, depending on configuration ordered)

blank.gifGPS Antenna

blank.gifWiFi Antenna

blank.gifConnected Grid Module Antennas (1 to 7, depending on configuration ordered)

blank.gif2-GB SD Flash Memory Module

blank.gifAC Power Supply (Power cable part number CGR-PWRCORD-NA or CGR-PWRCORD-EU must be ordered separately).

blank.gifBattery Backup Units (0 to 3, depending on configuration ordered)

1

Console cable

RJ-45-to-DB-9

1

Grounding kit

Grounding lug and two screws.

See Grounding Hardware.

1

Cable glands kit

Includes:

blank.gifOne cable gland (more can be ordered, see table 10)

blank.gifOne tube of anti-seize compound

1

Mounting bracket kit

Includes:

blank.gifMounting bracket

blank.gifMounting bracket security panel

blank.gifRequired hardware

For details, see Mounting Bracket Kit.

Optional Items (Ordered Separately)

1

Pole mount kit

Includes:

blank.gifMounting plate

blank.gifTwo clamp brackets

blank.gifRequired hardware

See Pole Mount Kit.

1

Band strap kit

Two steel straps.

See Band Strap Kit.

1

Strap tool kit

BAND-IT strap tool.

See Strap Tool Kit.

1

Antenna plug

CGR-ANT-PLUG