Digital Subscriber Line (DSL) SFP Support on the IR1800
The IR1800 now supports the DSL SFP in the same manner as the IR1101. For complete details, see the Configuring Digital Subscriber Line (DSL) chapter in the IR1101 Configuration Guide.
- Overview
- New Features
- Basic Router CLI Configuration
- Web User Interface
- Secure Shell
- NTP Timing Based on GPS Clock
- Managing Configuration Files
- Using Cisco IOS XE Software
- Cisco IOS XE Installation Methods
- Installing the Software
- Software Maintenance Upgrade (SMU)
- Smart Licensing Using Policy
- Configuring Ethernet Switch Ports
- Power Over Ethernet (PoE)
- vCPU and RAM Distribution
- Cellular Pluggable Interface Module Configuration Guide
- Cisco Wi-Fi Interface Module (WIM)
- Digital I/O, Ignition, and CAN Bus Connectivity
- Configuring GPS
- Information About SCADA
- Raw Socket Transport
- IOx Application Hosting
- Serial Relay Service
- Support for MACsec
- ROM Monitor Overview
- Connected Grid NMS Agent (CGNA) Support
- CLI Output for the FN980 5G Modem
- Unified Threat Defence
- Support for CAPWAP and WGB Modes on the Cisco Wi-Fi Interface Module
- Additional Modem Support for Cellular Pluggable Modules
- Support for P-LTE-450 Pluggable Interface Module
- Cellular Boot Time Improvements
- Digital Subscriber Line (DSL) SFP Support on the IR1800
- LoRaWAN Pluggable Interface Module Support
- Cisco SD-WAN Support
- Troubleshooting
- System Messages
- Environmental Monitoring
- Process Health Monitoring
- WAN Monitoring
- Yang Data Models
- gRPC Network Operations
Feedback