Server Specifications
This chapter lists the physical, environmental, and power specifications for the Cisco CSP 5200.
Physical Specifications
The following table lists the physical specifications for the Cisco CSP 5200 versions.
|
Description |
Specification |
|
Height |
1.7 in. (43.2 mm) |
|
Width |
16.9 in. (429.0 mm) |
|
Depth (length) |
Server only: 29.5 in. (740.3 mm) Server with slide rail: 31.0 in (787.4 mm) |
|
Weight |
Maximum: 37.5 lb. (17.0 Kg) Minimum: 29.0 lb. (13.2 Kg) |
Environmental Specifications
The following table lists the environmental requirements and specifications for the Cisco CSP 5200.
|
Description |
Specification |
|
Temperature, Operating |
41 to 95°F (5 to 35°C) Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level. |
|
Temperature, non-operating (when the server is stored or transported) |
–40 to 149°F (–40 to 65°C) |
|
Humidity (RH), operating |
10 to 90% |
|
Humidity (RH), non-operating (when the server is stored or transported) |
5 to 93% |
|
Altitude, operating |
0 to 10,000 feet |
|
Altitude, non-operating (when the server is stored or transported) |
0 to 40,000 feet |
|
Sound power level Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C) |
5.5 |
|
Sound pressure level Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C) |
40 |
Power Specifications
 Note |
Do not mix power supply types or wattages in the Cisco CSP 5200. Both power supplies must be identical. |
You can get more specific power information for your exact Cisco CSP 5200 configuration by using the Cisco Power Calculator:
The power specifications for the supported power supply options are listed in the following sections.
770 W AC Power Supply
This section lists the specifications for each 770 W AC power supply (CSP-PSU1-770W).
|
Description |
Specification |
|
AC Input Voltage |
Nominal range: 100–120 VAC, 200–240 VAC (Range: 90–132 VAC, 180–264 VAC) |
|
AC Input Frequency |
Nominal range: 50 to 60Hz (Range: 47–63 Hz) |
|
Maximum AC Input current |
9.5 A at 100 VAC 4.5 A at 208 VAC |
|
Maximum input volt-amperes |
950 VA at 100 VAC |
|
Maximum inrush current |
15 A (sub-cycle duration) |
|
Maximum hold-up time |
12 ms at 770 W |
|
Maximum output power per PSU |
770 W |
|
Power supply output voltage |
12 VDC |
|
Power supply standby voltage |
12 VDC |
|
Efficiency rating |
Climate Savers Platinum Efficiency (80Plus Platinum certified) |
|
Form factor |
RSP2 |
|
Input connector |
IEC320 C14 |
Power Cord Specifications
Each power supply in the Cisco CSP 5200 has a power cord. Standard power cords or jumper power cords are available for connection to the Cisco CSP 5200. The shorter jumper power cords, for use in racks, are available as an optional alternative to the standard power cords.
Note |
Only the approved power cords or jumper power cords listed below are supported. |
|
Description |
Length (Feet) |
Length (Meters) |
|
CAB-48DC-40A-8AWG Three-socket Mini-Fit connector to three-wire |
11.7 |
3.5 |
|
CAB-C13-C14-AC AC power cord, 10 A; C13 to C14, recessed receptacle |
9.8 |
3.0 |
|
CAB-250V-10A-AR AC power cord, 250 V, 10 A Argentina |
8.2 |
2.5 |
|
CAB-C13-C14-2M-JP AC Power Cord, C13 to C14 Japan PSE Mark |
6.6 |
2.0 |
|
CAB-9K10A-EU AC Power Cord, 250 V, 10 A; CEE 7/7 Plug Europe |
8.2 |
2.5 |
|
CAB-250V-10A-IS AC Power Cord, 250 V, 10 A Israel |
8.2 |
2.5 |
|
CAB-250V-10A-CN AC power cord, 250 V, 10 A PR China |
8.2 |
2.5 |
|
CAB-ACTW AC power cord, 250 V, 10 A Taiwan |
7.5 |
2.3 |
|
CAB-C13-CBN AC cabinet jumper power cord, 250, 10 A, C13 to C14 |
2.2 |
0.68 |
|
CAB-C13-C14-2M AC cabinet jumper power cord, 250 V, 10 A, C13 to C14 |
6.6 |
2.0 |
|
CAB-9K10A-AU AC power cord, 250 V, 10 A, 3112 plug, Australia |
8.2 |
2.5 |
|
CAB-N5K6A-NA AC power cord, 200/240 V, 6 A, North America |
8.2 |
2.5 |
|
CAB-250V-10A-ID AC power Cord, 250 V, 10 A, India |
8.2 |
2.5 |
|
CAB-9K10A-SW AC power cord, 250 V, 10 A, MP232 plug Switzerland |
8.2 |
2.5 |
|
CAB-250V-10A-BR AC power Cord, 250 V, 10 A Brazil |
8.2 |
2.5 |
|
CAB-9K10A-UK AC power cord, 250 V, 10 A (13 A fuse), BS1363 plug United Kingdom |
8.2 |
2.5 |
|
CAB-9K12A-NA AC power cord, 125 V, 13 A, NEMA 5-15 plug North America |
8.2 |
2.5 |
|
CAB-AC-L620-C13 AC power cord, NEMA L6-20 to C13 connectors |
6.6 |
2.0 |
|
CAB-9K10A-IT AC power cord, 250 V, 10 A, CEI 23-16/VII plug Italy |
8.2 |
2.5 |
|
R2XX-DMYMPWRCORD No power cord; PID option for ordering server with no power cord |
NA |
NA |
Feedback