Cisco CSP 5400 Specifications
This appendix lists the physical, environmental, and power specifications for the Cisco CSP 5400.
Physical Specifications
The following table lists the physical specifications for the Cisco CSP 5400 versions.
Description |
Specification |
Height |
3.4 in. (86.4 mm) |
Width |
16.9 in. (429.0 mm) |
Depth (length) |
Cisco CSP 5400 only: 29.5 in. (740.3 mm) Cisco CSP 5400 with slide rail: 31.0 in (787.4 mm) |
Maximum weight (fully loaded chassis) |
SFF 8-drive: 45.5 lb. (20.6 Kg) SFF 24-drive: 57.5 lb. (26.1 Kg) |
Environmental Specifications
The following table lists the environmental requirements and specifications for the Cisco CSP 5400.
Description |
Specification |
Temperature, Operating |
41 to 95°F (5 to 35°C) Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level. |
Temperature, non-operating (when the Cisco CSP 5400 is stored or transported) |
–40 to 149°F (–40 to 65°C) |
Humidity (RH), operating |
10 to 90% |
Humidity (RH), non-operating (when the Cisco CSP 5400 is stored or transported) |
5 to 93% |
Altitude, operating |
0 to 10,000 feet |
Altitude, non-operating (when the Cisco CSP 5400 is stored or transported) |
0 to 40,000 feet |
Sound power level Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C) |
5.5 |
Sound pressure level Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C) |
40 |
Power Specifications
Note |
Do not mix power supply types or wattages in the Cisco CSP 5400. Both power supplies must be identical. |
You can get more specific power information for your exact Cisco CSP 5400 configuration by using the Cisco UCS Power Calculator:
The power specifications for the supported power supply options are listed in the following sections.
1050 W AC Power Supply
This section lists the specifications for each 1050 W AC power supply (Cisco part number CSP-PSU1-1050W).
Description |
Specification |
AC Input Voltage |
Nominal range: 100–120 VAC, 200–240 VAC (Range: 90–132 VAC, 180–264 VAC) |
AC Input Frequency |
Nominal range: 50 to 60Hz (Range: 47–63 Hz) |
Maximum AC Input current |
12.5 A at 100 VAC 6.0 A at 208 VAC |
Maximum input volt-amperes |
1250 VA at 100 VAC |
Maximum inrush current |
15 A (sub-cycle duration) |
Maximum hold-up time |
12 ms at 1050 W |
Maximum output power per PSU |
800 W at 100–120 VAC 1050 W at 200–240 VAC |
Power supply output voltage |
12 VDC |
Power supply standby voltage |
12 VDC |
Efficiency rating |
Climate Savers Platinum Efficiency (80Plus Platinum certified) |
Form factor |
RSP2 |
Input connector |
IEC320 C14 |