controller (vc)
To configure a VCn controller, use the controller command in the config mode. To delete a VCn controller, use the no form of this command.
controller vcn R/S/I/P
no controller vcn R/S/I/P
Syntax Description
vcn |
Configures a VCn controller. The range of n is 4-16c, 4-64c. |
R/S/I/P |
Displays the Rack/Slot/Instance/Port of the controller. |
Command Default
None
send: (2)
expected: (2)
receive: (2)
Command Modes
Config modeCommand History
Release | Modification |
---|---|
Release 5.2.4 |
This command was introduced. |
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
Task ID | Operation |
---|---|
sonet-sdh |
write |
Examples
This example shows how to access the interface instance of a vc4-64c controller on port10:
RP/0/RP0:hostname(config)# controller vc4-64c 0/0/0/10