lldp
To enable the Link Layer Discovery Protocol (LLDP) globally for both transmit and receive operation on the system, use the lldp command in XR Config mode. To disable LLDP, use the no form of this command.
lldp
no lldp
Syntax Description
lldp |
Enables or disables LLDP globally for both transmit and receive operation on the system. |
Command Default
None
Command Modes
Config modeUsage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
Task ID | Operation |
---|---|
ethernet-services |
read, write |
Examples
The following example shows how to enable LLDP globally for both transmit and receive operation on a system.:
RP/0/RP0:hostname# configure
RP/0/RP0:hostname(config)# lldp