Controllers Breakout Command Reference

This chapter describes the commands to configure controllers breakout.

Controllers Breakout Command Reference

This chapter describes the commands to configure controllers breakout.

controller breakout (otn mode)

To configure breakout controller in otn mode, use the controller optics breakout-mode otn command in the config mode.

controller optics R/S/I/P { breakout-mode lane id} { otn } { framing framing type}

Syntax Description

controller optics

Name of the controller

R/S/I/P

Displays the Rack/Slot/Instance/Port of the controller.

breakout-mode

Breakout mode.

otn

Type of the controller.

framing

Framing for the breakout-mode.

Command Default

None

Command Modes

Config mode

Command History

Release Modification
Release 5.2.4

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command contact your AAA administrator for assistance.

Task ID

Task ID Operation

Breakout

write

Examples

The following example shows how to configure a breakout controller: 


RP/0/RP0:hostname(config)# controller optics 0/15/0/0 breakout-mode 3 otn framing opu2
RP/0/RP0:hostname(config-optics)# commit

controller breakout (ethernet mode)

To configure breakout controller in ethernet mode, use the controller optics breakout-mode ethernet command in the config mode.

controller optics R/S/I/P { breakout-mode lane id} { ethernet } { framing framing type mapping mapping t ype}

Syntax Description

controller optics

Name of the controller

R/S/I/P

Displays the Rack/Slot/Instance/Port of the controller.

breakout-mode

Breakout mode.

ethernet

Type of the controller.

framing

Framing for the breakout-mode.

mapping

Mapping for the breakout-mode.

Command Default

None

Command Modes

Config mode

Command History

Release Modification
Release 5.2.4

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command contact your AAA administrator for assistance.

Task ID

Task ID Operation

Breakout

write

Examples

The following example shows how to configure a breakout controller: 


RP/0/RP0:hostname(config)# controller optics 0/15/0/0 breakout-mode 3 ethernet framing odu2 mapping gfpf
RP/0/RP0:hostname(config-optics)# commit

controller breakout (sonet mode)

To configure breakout controller in sonet mode, use the controller optics breakout-mode sonet command in the config mode.

controller optics R/S/I/P { breakout-mode lane id} { sonet } { framing framing type mapping mapping type}

Syntax Description

controller optics

Name of the controller

R/S/I/P

Displays the Rack/Slot/Instance/Port of the controller.

breakout-mode

Breakout mode.

sonet

Type of the controller.

framing

Framing for the breakout-mode.

mapping

Mapping for the breakout-mode.

Command Default

None

Command Modes

Config mode

Command History

Release Modification
Release 6.1.2.2

This command was introduced.

Task ID

Task ID Operation

Breakout

write

Examples

The following example shows how to configure a breakout controller: 


RP/0/RP0:hostname(config)# controller optics 0/11/0/3 breakout-mode 1 sonet framing opu2 mapping bmp
RP/0/RP0:hostname(config-optics)# commit

controller breakout (sdh mode)

To configure breakout controller in sdh mode, use the controller optics breakout-mode sdh command in the config mode.

controller optics R/S/I/P { breakout-mode lane id} { sdh } { framing framing type mapping mapping type}

Syntax Description

controller optics

Name of the controller

R/S/I/P

Displays the Rack/Slot/Instance/Port of the controller.

breakout-mode

Breakout mode.

sdh

Type of the controller.

framing

Framing for the breakout-mode.

mapping

Mapping for the breakout-mode.

Command Default

None

Command Modes

Config mode

Command History

Release Modification
Release 6.1.2.2

This command was introduced.

Task ID

Task ID Operation

Breakout

write

Examples

The following example shows how to configure a breakout controller: 


RP/0/RP0:hostname(config)# controller optics 0/11/0/3 breakout-mode 1 sdh framing opu2 mapping bmp
RP/0/RP0:hostname(config-optics)# commit

controller breakout (LAN PHY mode)

To configure breakout controller in LAN PHY mode, use the controller optics breakout-mode ethernet framing packet mode command in the config mode.

controller optics R/S/I/P breakout-mode lane id ethernet framing packet mode data rate

Syntax Description

controller optics

Name of the controller

R/S/I/P

Enter the Rack/Slot/Instance/Port of the breakout controller.

breakout-mode

Breakout mode.

ethernet

Type of the controller.

framing packet

Framing for the breakout mode.

packet

Set framing type as packet.

mode data rate

Set data rate for the packet framing type.

Supported data rates:

  • 1x100GE

  • 2x100GE

  • 3x100GE

  • 4x100GE

Command Default

None

Command Modes

Config mode

Command History

Release Modification
Release 6.5.35

Parameter mode was added.

Release 6.1.36

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command contact your AAA administrator for assistance.

Task ID

Task ID Operation

Breakout

write

Examples

The following example shows how to configure a HundredGigE 0/15/0/0/3 breakout controller in LAN PHY mode: 


RP/0/RP0:hostname(config)# controller optics 0/15/0/0 breakout-mode 3 ethernet framing packet
RP/0/RP0:hostname(config-optics)# commit

Examples

The following example configures the breakout mode to 1x100GE data rate for the NCS4K-4H-QDD-P line card Ethernet controller.

RP/0/ (config-Optics)# transmit-power -95
RP/0/ (config-Optics)# dwdm-carrier 50GHz-grid itu-ch 2
RP/0/ (config-Optics)# breakout-mode Ethernet framing packet mode 1x100
Table 1. Supported Data Rates for NCS4K-4H-QDD-P Card Ports

Port

Supported Data Rates

4

  • 1x100GE

  • 2x100GE

  • 3x100GE

  • 4x100GE

5

  • 1x100GE

  • 2x100GE

6

  • 1x100GE

7

  • 1x100GE

show breakout-mode

To display details of breakout mode, use the show breakout-mode command in the exec mode.

show controller optics R/S/I/P { breakout-mode lane lane number} { capability}

Syntax Description

optics

Name of the port.

lane number

Displays the Rack/Slot/Instance/Port of the controller.

breakout-mode

Breakout mode.

lane

Displays the lane number.

Command Default

None

Command Modes

Exec mode

Command History

Release Modification
Release 5.2.4.6

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command contact your AAA administrator for assistance.

Task ID

Task ID Operation

Breakout

write

Examples

The following example shows how to configure a breakout controller. 

 RP/0/RP0:hostname# show controller optics 0/0/0/1 breakout-mode lane 1 capabilities
BreakOut Information
--------------------------------------------------
Port_no         Breakout Type   Framing                 Mapping                 PT type                                         Rate
0               Ethernet        OPU2 framing type       GFP-F mapping type      05 (GFP mapping)                                None
0               Ethernet        OPU2 framing type       GFP-F-Extended mapping type     09 (GFP mapping into OPU2)                      None
0               Ethernet        OPU Flex framing type   GFP-F mapping type      09 (GFP mapping into OPU2)                      10GE
0               Ethernet        OPU Flex framing type   GFP-F mapping type      09 (GFP mapping into OPU2)                      None
0               OTN             OPU2 framing type       None mapping type       Traffic Dependent                               None
0               OTN             OPU2e framing type      None mapping type       Traffic Dependent                               None
0               OTN             OPU1f framing type      None mapping type       Traffic Dependent                               None
0               OTN             OPU2f framing type      None mapping type       Traffic Dependent                               None
0               Ethernet        Packet framing type     None mapping type       NA                                              10GE
RP/0/RP0:SIT06#
RP/0/RP0:hostname# show controller optics 0/0/0/1 breakout-mode lane 1 configured
BreakOut Information
--------------------------------------------------
Breakout type   Lane    Framing                 Mapping                 PT type                                         Rate
Ethernet        1       OPU2 framing type       GFP-F mapping type      05 (GFP mapping)                                None
RP/0/RP0:SIT06#