Zoning

Zoning

Zoning enables you to set up access control between storage devices or user groups. If you have administrator privileges in your fabric, you can create zones to increase the network security and to prevent data loss or corruption. Zoning is enforced by examining the source-destination ID field.

From SAN Controller Release 12.0.1a, Regular zones, and IVR zones are merged into a single zoning page.


Note

When device aliases are used for zoning in Web UI, end devices must be logged into the fabric thus web GUI can configure zoning using device aliases. If end nodes are not logged in, PWWN can be used for zoning.

The following table describes the fields and icons that appear on SAN Controller Virtual Management > Zoning tab.

Field Description

Zoning Type

Choose radio button next to Regular or IVR to select required zoning type.

Fabric

From the Fabric drop-down list, you can choose the fabric for which you are configuring or viewing the Zoning.

If admin role locks the fabric, you can view lock icon next to the fabric field.

VSAN

Choose Regular Zoning type to view VSAN field.

From the VSAN drop-down list, you can choose the VSAN for which you are configuring regular zones.

Region ID

Choose IVR Zoning type to view Region ID field.

From the Region ID drop-down list, you can choose the region name for which you are configuring IVR zones.

Enhanced Zoning

Click configurations icon next to VSAN text field to view Enhanced zoning window.

Note

 

Enhanced Zoning is supported only for Regular zone.

For more details, refer to Enhanced Zoning section.

Cisco Fabric Services (CFS)

Click set-up assistant icon next to the Region ID field to view CFS window.

Note

 

CFS is supported only for IVR Zoning.

For more details, refer to CFS section.

Switch

From the Switch drop-down list, select the switch to which you want to configure.

Action

On Zoning field, click Actions to view the following items:

  • Changes

  • Database

  • Clear Server Cache

  • Discovery Sync

Changes

On Zoning field, click Actions > Changes.

  • Enable smart zoning - Enables smart zoning configuration for all the switches.

  • Commit Changes - Commits the Zoning configuration changes to all the switches. This field is only applicable when a zone is in the enhanced or smart mode.

  • Discard Pending - Discards the changes in progress.

Database

On Zoning field, click Actions > Database.

  • Backup database – Choose Backup Database, the Backup Database window is displayed. Enter a name and click Backup.

  • Restore database – Choose Restore Database, the Restore Database window is displayed. Upload appropriate file and click Restore.

Clear Server Cache

On Zoning area, choose Actions > Clear Server Cache.

Clears the cache on the server.

Discovery Sync

On Zoning area, choose Actions > Discovery Sync.

To synchronize zoning modules with discovery.

This chapter contains the following sections:

Enhanced Zoning

From SAN Controller Release 12.0.1a, Enhanced Zoning feature is added for Regular Zoning type.

Enhanced zoning performs all configurations within a single configuration session for regular zoning. When you begin a session, the switch locks the entire fabric to implement the changes.

Choose Regular radio button on Zoning type, Click configurations icon next to VSAN field to view Enhanced zoning window.

The Enhanced Zoning window has the following fields and their descriptions.

Field

Description

Switch

Specifies IP address of the switch.

Mode

Displays mode of the switch, that can be one of the following:

  • Basic

  • Enhanced

Result

Displays the activation results, which can be one of the following:

  • Success

  • Failed

Config DB locked by

Displays the role name of locked configuration database.

Action

Displays the action on the switch, that can be one of the following:

  • No operation

  • Commit changes

  • Cleanup

Click edit icon on last column to select required action and click check mark icon to save.

Last Action Results

Displays status of last configuration database.

Enforce full DB merge

Displays status as enabled or disabled. Click edit icon on last column to select required action and click check mark icon to save.

Enabling it ensures that both the active and local zones are merged and are identical on all switches for a VSAN.

Read from

For enhanced zones or IVR CFS enabled zones when a change is made to zoning DB on a switch, all zone data is pushed into a pending database, until commit command is issued.

This flag helps user to get data either from pending zone DB (Copy DB) or regular zone DB (Effective DB).

Click edit icon on last column to select required action and click check mark icon to save.

Activation Date

Specifies date of the zoneset activated.

To perform various operations on Enhanced Zoning window from SAN Controller Web UI, perform the following steps:

Procedure

Step 1

Choose Virtual Management > Zoning, choose required Zone Type, Fabric, and VSAN.

Step 2

Click configurations icon adjacent VSAN field

The Enhanced Zoning window is displayed.

Step 3

Click Edit icon next to Read from column, to select required database and click Tick icon to save.

Step 4

To change the mode from basic to enhanced, choose Actions > Set Mode to Enhanced, and click Apply.

Step 5

You can follow the same procedure to set mode from enhanced to basic, choose Actions > Set Mode to Basic, and click Apply.

CFS

Cisco Fabric Services (CFS) provides a common infrastructure for automatic configuration synchronization in the fabric for IVR zoning. When a CFS is configured on one switch and same properties can be transmitted on other switches. You can enable or disable IVR on the switch. Furthermore, you can enable or disable both CFS and global CFS on the selected switch.

Choose IVR radio button on Zoning type, Click set-up assistant icon next to VSAN field to view CFS window.

You can view below tabs on CFS window:

  • Control

  • IVR

  • Action

The following table describes the fields that appear on Control tab.

Fields Description
Switch Specifies IP address of the switch.
IVR Status Displays whether IVR is enabled or disabled on the switch.
Edit Click Edit icon to enable or disable IVR on the switch and click tick mark to save changes.
Refresh Click Refresh icon to refresh table.
Apply Click Apply to save changes for each modification on the switch.
Done Click Done to save all changes and to exit from CFS window.

The following table describes the fields and descriptions that appears on IVR tab.

Fields Description
Switch Specifies IP address of the switch.
CFS Status Specifies whether CFS status is enabled or disabled.
Global CFS Specifies whether this feature is enabled or disabled on the switch.
Read from

Specifies status:

  • Effective DB

  • Copy DB
Lock Owner Specifies switch is locked by admin.
Merge Status Specifies fabric merge that occurred.
Region ID Specifies the region id of the switch.
Edit Click Edit icon to perform changes in Read from and Region ID column for selected row.
Apply Click Apply to save changes for each modification on the switch
Refresh Click Refresh icon to refresh table.
Done Click Done to save all changes and to exit from CFS window.

To perform various operations on a switch in the IVR tab from SAN Controller Web UI, perform the following steps:

Procedure

Step 1

Select a switch, choose Actions > Commit and click Apply to enable IVR on a switch.

Note

 

You can commit changes only CFS is enabled on selected switch.

Step 2

Select a switch, choose Actions > Abort and click Apply to disable IVR on a switch.

Step 3

Select a switch, choose Actions > Clear and click Apply to clear IVR information on a switch.

Step 4

Select a switch, choose Actions > Enable CFS and click Apply to enable CFS on a switch.

Step 5

Select a switch, choose Actions > Disable Global CFS and click Apply to enable CFS globally on a switch.

The following table describes the fields and descriptions that appears on Action tab.

Actions

Description
Switch Specifies IP address of the switch.
Active Specifies switch active status is true or false.
Activation Time Specifies the activation date and time.
IVR NAT Status Specifies IVR status is enabled or disabled.
Auto Discover Topology Specifies whether auto discover topology status is true or false
Edit Click Edit icon to perform changes in IVR NAT Status and Auto Discover Topology columns for selected row.
Region ID Specifies the region id of the switch.
Edit Click Edit icon to perform changes in Read from and Region ID column for selected row.
Apply Click Apply to save changes for each modification on the switch
Refresh Click Refresh icon to refresh table.
Done Click Done to save all changes and to exit from CFS window.

Zonesets

Based on the selected Fabric, VSAN and Switch, the Zoneset area displays the configured zonesets and their status. You can create, copy, delete, or edit the zonesets. Further, the zonesets can be activated or deactivated.

The following table describes the fields and descriptions that appear on SAN Controller Virtual Management > Zoning Zonesets table.

Field

Description

Zoneset Name

Lists all the names that are configured under the selected Zoneset.

Click on the Zoneset name to view the summary information in a slide-in pane. Click Edit Zoning to edit and activate zoneset.

Modified

Displays if the zoneset is modified or not.

Zones

Lists all the Zones that are configured under the selected Zoneset.

Members

Lists the members present in the selected Zone.

Activation Date

Specifies date of the zoneset activated.

Procedure

Step 1

To create zonesets from SAN Controller Web UI, choose Actions > Create Zoneset.

The Create Zoneset window appears.

Step 2

Enter a valid name for the zoneset, and click Create zoneset.

A zoneset is created and is listed in the Zoneset area.

Step 3

To Copy/Clone zonesets, choose radio button and choose Actions > Copy / Clone Zoneset or click ellipse icon in last column on required zone name.

The Clone or Copy Zoneset window shows two options.

Choose the appropriate radio button. You can choose one of the following:

  • Copy: Creates a new zoneset that consists copies of the zones in the initial zoneset.

    • You can prepend or append a string to identify the copied zoneset. Enter a valid string in the Tag field, and choose the Prepend names or Append names radio button.

    • Clone: To create a new zoneset with a new name consisting of the same zones as the source zoneset.

      In the Name field, enter a valid name for the new zoneset.

  • Click Copy zoneset to clone or copy the zoneset.

    The cloned or the copied zoneset appears in the Zoneset area.

Step 4

To delete the zoneset, choose the zoneset radio button next to Zoneset Name column and choose Actions > Delete Zoneset.

A confirmation window appears. Click Yes to delete the zoneset.

Step 5

To edit the zone name, choose the zone radio button next to the Zoneset Name column and choose Actions> > Edit zones & members or click ellipse icon in last column on required zone name.

The Zoneset page for the selected fabric is displayed.

Choose check box next to Zone Name column, choose Actions > Rename zone.

Enter the new name for the zoneset. Click Rename.

Step 6

To deactivate a zoneset, choose the zoneset radio button next to the Zoneset Name column and click Actions > Deactivate.

A confirmation window appears. Click Yes to deactivate the zoneset.

Step 7

To activate a zoneset, choose radio button next to the Zoneset Name column and click Activate.

The Zoneset Differences window shows the changes made to the zoneset since it was activated previously. Click Activate.

Zones

UI Path: Virtual Management > Zoning. Select a zone member, a slide-in panel appears. Click on Launch icon to view Zones window.

Based on the Zoneset that is selected, the zones that are configured under that zoneset are displayed in the Zones area. To view Zones tab, click on a radio button for a zoneset, choose Actions > Edit zones & members. A Zoneset window is displayed. It also displays true or false only when the VSAN has smart zone that is enabled.

You can create, copy, delete, or clone, and rename the zones. It also displays true or false only when the VSAN has smart zone that is enabled. Furthermore, the zones can be added to or removed from the selected Zoneset. You can also enable or disable the smart zone on the zone table.

The Zones area has the following fields and their descriptions.

Field Description

Filter by Attribute

 You can search by specifying the required zone name or zoneset and members.

Add to zoneset

You can select zone name and click Add to zoneset.

Refresh

Click Refresh icon to refresh table.

Zone Name

Displays the name of the zone. You can search by specifying the zone name.

Note

 

You cannot save any changes made to topology layout from this screen.

Select the zone name to view the members of the zoneset.

In Zoneset

Specifies whether a zone is part of a zoneset.

Displays true if the zone is part of a zoneset. Otherwise, displays false.

You can search by choosing true or false from the In Zoneset drop-down list.

Members

Specifies the zone members of the zone.

You can search by specifying the member.
Procedure

Step 1

To create zones, choose Virtual Management > Zoning.

Step 2

In the Zonesets area, choose required Zoneset Name.

A slide-in panel is displayed.

  1. Click Edit Zoning or launch icon to view Zoneset window.

    By default, Zones tab is displayed.

Step 3

To create a zone, choose Actions > Create new zone.

  1. In the Create new zone, enter a valid name for the Zone, and click Create.

  2. Click Create new zone.

  3. Choose select box next to Smart Zoning, to enable smart zoning for new zone.

    A zone is created and is listed in the Zones area.

Step 4

To enable a smart zone, choose required check box next to Zone Name, choose Actions > Enable smart zoning.

You can view smart zone column only if smart zoning is enabled for VSAN.

Step 5

To disable a smart zone, choose required check box next to Zone Name, choose Actions > Disable smart zoning.

Step 6

To Clone Zones, choose Configure > SAN > Zoning > Zones, select the Zone radio button and click Clone Zone icon.

The Clone Zone window is displayed.

  1. In the Name field, enter a valid name for the new zoneset.

  2. Click Clone to clone the zone.

    The cloned zones appear in the Zones area.

Step 7

To rename a zone from a zoneset, choose required check box next to Zone Name, choose Actions > Rename zone.

In the Name field, enter the new name for the zone, and click Rename.

Step 8

To remove a zone from a zoneset, choose required check box next to Zone Name, choose Actions > Remove from zoneset.

The zone is removed from the selected Zoneset. A green tick mark disappears next to the Zone name to indicate that the zone is removed from the zoneset.

Step 9

To delete a zone from a zoneset, choose required check box next to Zone Name, choose Actions > Delete zone(s).

You can select single or multiple zones to delete at an instant.

Note

 

You cannot delete a zone that is a member of the selected zoneset. Remove the zone from the zoneset to delete it.

FC Aliases

Navigation Path: Virtual Management > > Zoning > Zone Sets > Members

From SAN Controller Release 12.0.1a, FC Aliases feature is supported for regular zones. It is used to associate with one or more pWWNs to a required name. When you add a zone member, you can add FC Alias or delete existing FC Alias. FC Aliases tab displays below fields:

  • FC Alias – Specifies the name of FC Alias.

  • Member – Specifies members associated with FC Alias.

To do FCAliases operations, perform the following steps:

Procedure

Step 1

Choose Virtual Management > Regular Zones, click required Zoneset Name.

A slide-in panel window appears.

Step 2

Click Edit Zoning or Launch icon to view Zoneset page.

The Zoneset window is displayed.

Step 3

Click FC Aliases tab to view the FC Aliases area.

Step 4

To create a new FC alias, choose Actions > Create new FC Alias.

The Create new FC Alias window is displayed.

  1. Enter a valid name in a text field and click Create FC Alias.

    An FC alias is created and is listed in the FC Aliases area.

Step 5

To delete a new FC alias, select required check box next to the FC Alias column, choose Actions > Delete FC Alias.

Members

UI Path: Virtual Management > Zoning > Zone Sets > Members

Based on the selected zoneset and zone, the Members area displays the zone members and their status. Enter required field name in Filter by attributes text field to view member details.

The Members area has the following fields and their descriptions.

Field Description

Parent

Displays the name of the zone member.

You can search by specifying the zone name.

Member

 Displays the member name for the zone.

Switch

Specifies the switch that the zone member is linked.

You can search by specifying the switch.

Interface

Specifies the interface that the zone member is attached to.

You can search by specifying the interface.

Status

 Specifies the status of zone.

Zoned By

Displays the type of zoning.

You can search by type of zoning such as WWN, FCID, FC Alias, or iSCSI, FWWN, Device Alias, IP Subnet and many more.

FCID

Specifies the FCID associated with the zone member.

You can search by specifying the FCID associated with the zone member.

pWWN

Specifies the pWWN of the switch.

You can search by specifying the WWN of the switch.

You can add or remove members from the zoneset. Furthermore, you can also add existing members and add existing FC Alias to members.

From SAN Controller Web UI, choose Virtual Management > Zoning > Zoneset > Members to view Members area on Zoneset window.

Select a zoneset and zones to view the list of zone members.

Procedure

Step 1

To create new member, In Members area, choose Actions > Create new member.

In the Create and Add a new Member window, choose radio button of the appropriate zone.

Enter a valid name in text field and click Create Member.

Based on Zone by radio button section, the new name is only for the selected zone by and not for all the zone. For example, when you choose WWN zone by, the name in the text field is for WWN zone. Similarly, when you choose Domain & Port zone by, the Domain ID number and Switch Interface name.

The Create new Member allows you to add a member to a zone that does not exist in the fabric, currently. This feature can be utilized when the device discovery did not discover all the devices. With the Available to add feature, you can add a discovered device to the zone.

Step 2

To remove a zone member, choose check box next to Parent column and then click Actions > Remove Member from zone(s)

You can select multiple zones in an instance to remove.

Step 3

To add existing member, choose Actions > Add existing members.

The Add existing members window is displayed.

This window has the following fields and their descriptions.

Field

Description

Zone By

The Zone by feature determines if the device must be added to the zone using the device WWN or device alias.

If you choose Zone By: End Ports, the devices are added to the zones by WWN.

Similarly, for Device Alias and FC Alias the devices are added to the zones by Device Alias and FC Alias respectively. Based on the zone by you choose, the devices are displayed.

Member Name

Displays the name of the zone.

You can search by specifying the zone name.

Type

Specifies the switch is storage or host.

Switch

Specifies the switch that the zone member is linked.

You can search by specifying the switch.

Interface

Specifies the interface that the zone member is attached to.

You can search by specifying the interface.

pWWN

Specifies the pWWN of the switch.

You can search by specifying the pWWN of the switch.

VSAN

Specifies the VSAN the zone member is in.

Step 4

Select the appropriate Zone by option and select required Member Name.

Step 5

Click Add members.

Note

 

You can select more than one zone. A dialog appears that shows a list of all the zones that are currently selected on the zone table.