FSM Faults

This chapter provides information about the faults that may be raised during one or more stages of an FSM task.

Note Unless an FSM fault appears on the Faults tab, you do not need to take any action to resolve the fault. FSM stages fail and retry for many reasons. These faults do not always indicate an issue with a component or the FSM.

fsmFailAaaEpUpdateEp

Fault Code:F999619

Message

[FSM:FAILED]: sam:dme:AaaEpUpdateEp

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999619 

mibFaultName: fsmFailAaaEpUpdateEp 

moClass: aaa:Ep 

Type: fsm

fsmFailAaaRealmUpdateRealm

Fault Code:F999620

Message

[FSM:FAILED]: sam:dme:AaaRealmUpdateRealm

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999620 

mibFaultName: fsmFailAaaRealmUpdateRealm 

moClass: aaa:Realm 

Type: fsm

fsmFailAaaUserEpUpdateUserEp

Fault Code:F999621

Message

[FSM:FAILED]: sam:dme:AaaUserEpUpdateUserEp

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999621 

mibFaultName: fsmFailAaaUserEpUpdateUserEp 

moClass: aaa:UserEp 

Type: fsm

fsmFailAdaptorExtEthIfPathReset

Fault Code:F999892

Message

[FSM:FAILED]: sam:dme:AdaptorExtEthIfPathReset

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999892 

mibFaultName: fsmFailAdaptorExtEthIfPathReset 

moClass: adaptor:ExtEthIf 

Type: fsm

fsmFailAdaptorHostEthIfCircuitReset

Fault Code:F999897

Message

[FSM:FAILED]: sam:dme:AdaptorHostEthIfCircuitReset

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999897 

mibFaultName: fsmFailAdaptorHostEthIfCircuitReset 

moClass: adaptor:HostEthIf 

Type: fsm

fsmFailAdaptorHostFcIfCircuitReset

Fault Code:F999897

Message

[FSM:FAILED]: sam:dme:AdaptorHostFcIfCircuitReset

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999897 

mibFaultName: fsmFailAdaptorHostFcIfCircuitReset 

moClass: adaptor:HostFcIf 

Type: fsm

fsmFailAdaptorHostFcIfResetFcPersBinding

Fault Code:F999574

Message

[FSM:FAILED]: sam:dme:AdaptorHostFcIfResetFcPersBinding

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999574 

mibFaultName: fsmFailAdaptorHostFcIfResetFcPersBinding 

moClass: adaptor:HostFcIf 

Type: fsm

fsmFailCallhomeEpConfigCallhome

Fault Code:F999710

Message

[FSM:FAILED]: sam:dme:CallhomeEpConfigCallhome

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999710 

mibFaultName: fsmFailCallhomeEpConfigCallhome 

moClass: callhome:Ep 

Type: fsm

fsmFailCapabilityCatalogueActivateCatalog

Fault Code:F1000085

Message

[FSM:FAILED]: sam:dme:CapabilityCatalogueActivateCatalog

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000085 

mibFaultName: fsmFailCapabilityCatalogueActivateCatalog 

moClass: capability:Catalogue 

Type: fsm

fsmFailCapabilityCatalogueDeployCatalogue

Fault Code:F999971

Message

[FSM:FAILED]: sam:dme:CapabilityCatalogueDeployCatalogue

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999971 

mibFaultName: fsmFailCapabilityCatalogueDeployCatalogue 

moClass: capability:Catalogue 

Type: fsm

fsmFailCapabilityMgmtExtensionActivateMgmtExt

Fault Code:F1000086

Message

[FSM:FAILED]: sam:dme:CapabilityMgmtExtensionActivateMgmtExt

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000086 

mibFaultName: fsmFailCapabilityMgmtExtensionActivateMgmtExt 

moClass: capability:MgmtExtension 

Type: fsm

fsmFailCapabilityUpdaterUpdater

Fault Code:F999944

Message

[FSM:FAILED]: sam:dme:CapabilityUpdaterUpdater

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999944 

mibFaultName: fsmFailCapabilityUpdaterUpdater 

moClass: capability:Updater 

Type: fsm

fsmFailCommSvcEpRestartWebSvc

Fault Code:F999617

Message

[FSM:FAILED]: sam:dme:CommSvcEpRestartWebSvc

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999617 

mibFaultName: fsmFailCommSvcEpRestartWebSvc 

moClass: comm:SvcEp 

Type: fsm

fsmFailCommSvcEpUpdateSvcEp

Fault Code:F999616

Message

[FSM:FAILED]: sam:dme:CommSvcEpUpdateSvcEp

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999616 

mibFaultName: fsmFailCommSvcEpUpdateSvcEp 

moClass: comm:SvcEp 

Type: fsm

fsmFailComputeBladeDiag

Fault Code:F999575

Message

[FSM:FAILED]: sam:dme:ComputeBladeDiag

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999575 

mibFaultName: fsmFailComputeBladeDiag 

moClass: compute:Blade 

Type: fsm

fsmFailComputeBladeDiscover

Fault Code:F999560

Message

[FSM:FAILED]: sam:dme:ComputeBladeDiscover

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999560 

mibFaultName: fsmFailComputeBladeDiscover 

moClass: compute:Blade 

Type: fsm

fsmFailComputeBladeUpdateBoardController

Fault Code:F999970

Message

[FSM:FAILED]: sam:dme:ComputeBladeUpdateBoardController

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999970 

mibFaultName: fsmFailComputeBladeUpdateBoardController 

moClass: compute:Blade 

Type: fsm

fsmFailComputePhysicalActivateAdaptor

Fault Code:F1000084

Message

[FSM:FAILED]: sam:dme:ComputePhysicalActivateAdaptor

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000084 

mibFaultName: fsmFailComputePhysicalActivateAdaptor 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalAssociate

Fault Code:F1000013

Message

[FSM:FAILED]: sam:dme:ComputePhysicalAssociate

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000013 

mibFaultName: fsmFailComputePhysicalAssociate 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalBiosRecovery

Fault Code:F1000024

Message

[FSM:FAILED]: sam:dme:ComputePhysicalBiosRecovery

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000024 

mibFaultName: fsmFailComputePhysicalBiosRecovery 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalCmosReset

Fault Code:F1000026

Message

[FSM:FAILED]: sam:dme:ComputePhysicalCmosReset

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000026 

mibFaultName: fsmFailComputePhysicalCmosReset 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalConfigSoL

Fault Code:F1000123

Message

[FSM:FAILED]: sam:dme:ComputePhysicalConfigSoL

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000123 

mibFaultName: fsmFailComputePhysicalConfigSoL 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalDecommission

Fault Code:F1000016

Message

[FSM:FAILED]: sam:dme:ComputePhysicalDecommission

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000016 

mibFaultName: fsmFailComputePhysicalDecommission 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalDiagnosticInterrupt

Fault Code:F1000156

Message

[FSM:FAILED]: sam:dme:ComputePhysicalDiagnosticInterrupt

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000156 

mibFaultName: fsmFailComputePhysicalDiagnosticInterrupt 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalDisassociate

Fault Code:F1000014

Message

[FSM:FAILED]: sam:dme:ComputePhysicalDisassociate

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000014 

mibFaultName: fsmFailComputePhysicalDisassociate 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalHardShutdown

Fault Code:F1000018

Message

[FSM:FAILED]: sam:dme:ComputePhysicalHardShutdown

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000018 

mibFaultName: fsmFailComputePhysicalHardShutdown 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalHardreset

Fault Code:F1000021

Message

[FSM:FAILED]: sam:dme:ComputePhysicalHardreset

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000021 

mibFaultName: fsmFailComputePhysicalHardreset 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalPowerCap

Fault Code:F1000015

Message

[FSM:FAILED]: sam:dme:ComputePhysicalPowerCap

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000015 

mibFaultName: fsmFailComputePhysicalPowerCap 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalPowercycle

Fault Code:F1000020

Message

[FSM:FAILED]: sam:dme:ComputePhysicalPowercycle

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000020 

mibFaultName: fsmFailComputePhysicalPowercycle 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalResetBmc

Fault Code:F1000027

Message

[FSM:FAILED]: sam:dme:ComputePhysicalResetBmc

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000027 

mibFaultName: fsmFailComputePhysicalResetBmc 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalResetKvm

Fault Code:F1000203

Message

[FSM:FAILED]: sam:dme:ComputePhysicalResetKvm

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000203 

mibFaultName: fsmFailComputePhysicalResetKvm 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalSoftShutdown

Fault Code:F1000017

Message

[FSM:FAILED]: sam:dme:ComputePhysicalSoftShutdown

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000017 

mibFaultName: fsmFailComputePhysicalSoftShutdown 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalSoftreset

Fault Code:F1000022

Message

[FSM:FAILED]: sam:dme:ComputePhysicalSoftreset

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000022 

mibFaultName: fsmFailComputePhysicalSoftreset 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalSwConnUpd

Fault Code:F1000023

Message

[FSM:FAILED]: sam:dme:ComputePhysicalSwConnUpd

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000023 

mibFaultName: fsmFailComputePhysicalSwConnUpd 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalTurnup

Fault Code:F1000019

Message

[FSM:FAILED]: sam:dme:ComputePhysicalTurnup

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000019 

mibFaultName: fsmFailComputePhysicalTurnup 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalUnconfigSoL

Fault Code:F1000124

Message

[FSM:FAILED]: sam:dme:ComputePhysicalUnconfigSoL

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000124 

mibFaultName: fsmFailComputePhysicalUnconfigSoL 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalUpdateAdaptor

Fault Code:F1000083

Message

[FSM:FAILED]: sam:dme:ComputePhysicalUpdateAdaptor

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000083 

mibFaultName: fsmFailComputePhysicalUpdateAdaptor 

moClass: compute:Physical 

Type: fsm

fsmFailComputePhysicalUpdateExtUsers

Fault Code:F1000048

Message

[FSM:FAILED]: sam:dme:ComputePhysicalUpdateExtUsers

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000048 

mibFaultName: fsmFailComputePhysicalUpdateExtUsers 

moClass: compute:Physical 

Type: fsm

fsmFailComputeRackUnitDiscover

Fault Code:F999560

Message

[FSM:FAILED]: sam:dme:ComputeRackUnitDiscover

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999560 

mibFaultName: fsmFailComputeRackUnitDiscover 

moClass: compute:RackUnit 

Type: fsm

fsmFailComputeRackUnitOffline

Fault Code:F1000210

Message

[FSM:FAILED]: sam:dme:ComputeRackUnitOffline

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000210 

mibFaultName: fsmFailComputeRackUnitOffline 

moClass: compute:RackUnit 

Type: fsm

fsmFailEpqosDefinitionDelTaskRemove

Fault Code:F999790

Message

[FSM:FAILED]: sam:dme:EpqosDefinitionDelTaskRemove

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999790 

mibFaultName: fsmFailEpqosDefinitionDelTaskRemove 

moClass: epqos:DefinitionDelTask 

Type: fsm

fsmFailEpqosDefinitionDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:EpqosDefinitionDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailEpqosDefinitionDeploy 

moClass: epqos:Definition 

Type: fsm

fsmFailEquipmentChassisDynamicReallocation

Fault Code:F1000174

Message

[FSM:FAILED]: sam:dme:EquipmentChassisDynamicReallocation

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000174 

mibFaultName: fsmFailEquipmentChassisDynamicReallocation 

moClass: equipment:Chassis 

Type: fsm

fsmFailEquipmentChassisPowerCap

Fault Code:F1000015

Message

[FSM:FAILED]: sam:dme:EquipmentChassisPowerCap

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000015 

mibFaultName: fsmFailEquipmentChassisPowerCap 

moClass: equipment:Chassis 

Type: fsm

fsmFailEquipmentChassisPsuPolicyConfig

Fault Code:F999573

Message

[FSM:FAILED]: sam:dme:EquipmentChassisPsuPolicyConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999573 

mibFaultName: fsmFailEquipmentChassisPsuPolicyConfig 

moClass: equipment:Chassis 

Type: fsm

fsmFailEquipmentChassisRemoveChassis

Fault Code:F999447

Message

[FSM:FAILED]: sam:dme:EquipmentChassisRemoveChassis

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999447 

mibFaultName: fsmFailEquipmentChassisRemoveChassis 

moClass: equipment:Chassis 

Type: fsm

fsmFailEquipmentFexRemoveFex

Fault Code:F999982

Message

[FSM:FAILED]: sam:dme:EquipmentFexRemoveFex

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999982 

mibFaultName: fsmFailEquipmentFexRemoveFex 

moClass: equipment:Fex 

Type: fsm

fsmFailEquipmentIOCardFeConn

Fault Code:F999446

Message

[FSM:FAILED]: sam:dme:EquipmentIOCardFeConn

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999446 

mibFaultName: fsmFailEquipmentIOCardFeConn 

moClass: equipment:IOCard 

Type: fsm

fsmFailEquipmentIOCardFePresence

Fault Code:F999445

Message

[FSM:FAILED]: sam:dme:EquipmentIOCardFePresence

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999445 

mibFaultName: fsmFailEquipmentIOCardFePresence 

moClass: equipment:IOCard 

Type: fsm

fsmFailEquipmentIOCardMuxOffline

Fault Code:F999985

Message

[FSM:FAILED]: sam:dme:EquipmentIOCardMuxOffline

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999985 

mibFaultName: fsmFailEquipmentIOCardMuxOffline 

moClass: equipment:IOCard 

Type: fsm

fsmFailEquipmentIOCardResetCmc

Fault Code:F999843

Message

[FSM:FAILED]: sam:dme:EquipmentIOCardResetCmc

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999843 

mibFaultName: fsmFailEquipmentIOCardResetCmc 

moClass: equipment:IOCard 

Type: fsm

fsmFailEquipmentIOCardResetIom

Fault Code:F1000028

Message

[FSM:FAILED]: sam:dme:EquipmentIOCardResetIom

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000028 

mibFaultName: fsmFailEquipmentIOCardResetIom 

moClass: equipment:IOCard 

Type: fsm

fsmFailEquipmentLocatorLedSetFeLocatorLed

Fault Code:F999983

Message

[FSM:FAILED]: sam:dme:EquipmentLocatorLedSetFeLocatorLed

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999983 

mibFaultName: fsmFailEquipmentLocatorLedSetFeLocatorLed 

moClass: equipment:LocatorLed 

Type: fsm

fsmFailEquipmentLocatorLedSetLocatorLed

Fault Code:F999448

Message

[FSM:FAILED]: sam:dme:EquipmentLocatorLedSetLocatorLed

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999448 

mibFaultName: fsmFailEquipmentLocatorLedSetLocatorLed 

moClass: equipment:LocatorLed 

Type: fsm

fsmFailExtvmmKeyStoreCertInstall

Fault Code:F999920

Message

[FSM:FAILED]: sam:dme:ExtvmmKeyStoreCertInstall

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999920 

mibFaultName: fsmFailExtvmmKeyStoreCertInstall 

moClass: extvmm:KeyStore 

Type: fsm

fsmFailExtvmmMasterExtKeyConfig

Fault Code:F999919

Message

[FSM:FAILED]: sam:dme:ExtvmmMasterExtKeyConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999919 

mibFaultName: fsmFailExtvmmMasterExtKeyConfig 

moClass: extvmm:MasterExtKey 

Type: fsm

fsmFailExtvmmProviderConfig

Fault Code:F999919

Message

[FSM:FAILED]: sam:dme:ExtvmmProviderConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999919 

mibFaultName: fsmFailExtvmmProviderConfig 

moClass: extvmm:Provider 

Type: fsm

fsmFailExtvmmSwitchDelTaskRemoveProvider

Fault Code:F999921

Message

[FSM:FAILED]: sam:dme:ExtvmmSwitchDelTaskRemoveProvider

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999921 

mibFaultName: fsmFailExtvmmSwitchDelTaskRemoveProvider 

moClass: extvmm:SwitchDelTask 

Type: fsm

fsmFailFabricComputeSlotEpIdentify

Fault Code:F999559

Message

[FSM:FAILED]: sam:dme:FabricComputeSlotEpIdentify

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999559 

mibFaultName: fsmFailFabricComputeSlotEpIdentify 

moClass: fabric:ComputeSlotEp 

Type: fsm

fsmFailFabricLanCloudSwitchMode

Fault Code:F999579

Message

[FSM:FAILED]: sam:dme:FabricLanCloudSwitchMode

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999579 

mibFaultName: fsmFailFabricLanCloudSwitchMode 

moClass: fabric:LanCloud 

Type: fsm

fsmFailFabricSanCloudSwitchMode

Fault Code:F999579

Message

[FSM:FAILED]: sam:dme:FabricSanCloudSwitchMode

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999579 

mibFaultName: fsmFailFabricSanCloudSwitchMode 

moClass: fabric:SanCloud 

Type: fsm

fsmFailFirmwareDistributableDelete

Fault Code:F999691

Message

[FSM:FAILED]: sam:dme:FirmwareDistributableDelete

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999691 

mibFaultName: fsmFailFirmwareDistributableDelete 

moClass: firmware:Distributable 

Type: fsm

fsmFailFirmwareDownloaderDownload

Fault Code:F999690

Message

[FSM:FAILED]: sam:dme:FirmwareDownloaderDownload

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999690 

mibFaultName: fsmFailFirmwareDownloaderDownload 

moClass: firmware:Downloader 

Type: fsm

fsmFailFirmwareImageDelete

Fault Code:F999691

Message

[FSM:FAILED]: sam:dme:FirmwareImageDelete

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999691 

mibFaultName: fsmFailFirmwareImageDelete 

moClass: firmware:Image 

Type: fsm

fsmFailLicenseDownloaderDownload

Fault Code:F999690

Message

[FSM:FAILED]: sam:dme:LicenseDownloaderDownload

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999690 

mibFaultName: fsmFailLicenseDownloaderDownload 

moClass: license:Downloader 

Type: fsm

fsmFailLicenseFileClear

Fault Code:F1000092

Message

[FSM:FAILED]: sam:dme:LicenseFileClear

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000092 

mibFaultName: fsmFailLicenseFileClear 

moClass: license:File 

Type: fsm

fsmFailLicenseFileInstall

Fault Code:F1000091

Message

[FSM:FAILED]: sam:dme:LicenseFileInstall

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000091 

mibFaultName: fsmFailLicenseFileInstall 

moClass: license:File 

Type: fsm

fsmFailLicenseInstanceUpdateFlexlm

Fault Code:F1000093

Message

[FSM:FAILED]: sam:dme:LicenseInstanceUpdateFlexlm

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000093 

mibFaultName: fsmFailLicenseInstanceUpdateFlexlm 

moClass: license:Instance 

Type: fsm

fsmFailLsServerConfigure

Fault Code:F1000035

Message

[FSM:FAILED]: sam:dme:LsServerConfigure

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000035 

mibFaultName: fsmFailLsServerConfigure 

moClass: ls:Server 

Type: fsm

fsmFailMgmtBackupBackup

Fault Code:F999723

Message

[FSM:FAILED]: sam:dme:MgmtBackupBackup

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999723 

mibFaultName: fsmFailMgmtBackupBackup 

moClass: mgmt:Backup 

Type: fsm

fsmFailMgmtControllerActivateBMC

Fault Code:F999697

Message

[FSM:FAILED]: sam:dme:MgmtControllerActivateBMC

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999697 

mibFaultName: fsmFailMgmtControllerActivateBMC 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerActivateIOM

Fault Code:F999695

Message

[FSM:FAILED]: sam:dme:MgmtControllerActivateIOM

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999695 

mibFaultName: fsmFailMgmtControllerActivateIOM 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerExtMgmtIfConfig

Fault Code:F999558

Message

[FSM:FAILED]: sam:dme:MgmtControllerExtMgmtIfConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999558 

mibFaultName: fsmFailMgmtControllerExtMgmtIfConfig 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerOnline

Fault Code:F1000209

Message

[FSM:FAILED]: sam:dme:MgmtControllerOnline

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000209 

mibFaultName: fsmFailMgmtControllerOnline 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerSysConfig

Fault Code:F999863

Message

[FSM:FAILED]: sam:dme:MgmtControllerSysConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999863 

mibFaultName: fsmFailMgmtControllerSysConfig 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerUpdateBMC

Fault Code:F999696

Message

[FSM:FAILED]: sam:dme:MgmtControllerUpdateBMC

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999696 

mibFaultName: fsmFailMgmtControllerUpdateBMC 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerUpdateIOM

Fault Code:F999694

Message

[FSM:FAILED]: sam:dme:MgmtControllerUpdateIOM

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999694 

mibFaultName: fsmFailMgmtControllerUpdateIOM 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerUpdateSwitch

Fault Code:F999693

Message

[FSM:FAILED]: sam:dme:MgmtControllerUpdateSwitch

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999693 

mibFaultName: fsmFailMgmtControllerUpdateSwitch 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtControllerUpdateUCSManager

Fault Code:F999855

Message

[FSM:FAILED]: sam:dme:MgmtControllerUpdateUCSManager

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999855 

mibFaultName: fsmFailMgmtControllerUpdateUCSManager 

moClass: mgmt:Controller 

Type: fsm

fsmFailMgmtIfDisableVip

Fault Code:F999721

Message

[FSM:FAILED]: sam:dme:MgmtIfDisableVip

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999721 

mibFaultName: fsmFailMgmtIfDisableVip 

moClass: mgmt:If 

Type: fsm

fsmFailMgmtIfEnableHA

Fault Code:F999722

Message

[FSM:FAILED]: sam:dme:MgmtIfEnableHA

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999722 

mibFaultName: fsmFailMgmtIfEnableHA 

moClass: mgmt:If 

Type: fsm

fsmFailMgmtIfEnableVip

Fault Code:F999720

Message

[FSM:FAILED]: sam:dme:MgmtIfEnableVip

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999720 

mibFaultName: fsmFailMgmtIfEnableVip 

moClass: mgmt:If 

Type: fsm

fsmFailMgmtIfSwMgmtInbandIfConfig

Fault Code:F999714

Message

[FSM:FAILED]: sam:dme:MgmtIfSwMgmtInbandIfConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999714 

mibFaultName: fsmFailMgmtIfSwMgmtInbandIfConfig 

moClass: mgmt:If 

Type: fsm

fsmFailMgmtIfSwMgmtOobIfConfig

Fault Code:F999713

Message

[FSM:FAILED]: sam:dme:MgmtIfSwMgmtOobIfConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999713 

mibFaultName: fsmFailMgmtIfSwMgmtOobIfConfig 

moClass: mgmt:If 

Type: fsm

fsmFailMgmtIfVirtualIfConfig

Fault Code:F999719

Message

[FSM:FAILED]: sam:dme:MgmtIfVirtualIfConfig

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999719 

mibFaultName: fsmFailMgmtIfVirtualIfConfig 

moClass: mgmt:If 

Type: fsm

fsmFailMgmtImporterImport

Fault Code:F999724

Message

[FSM:FAILED]: sam:dme:MgmtImporterImport

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999724 

mibFaultName: fsmFailMgmtImporterImport 

moClass: mgmt:Importer 

Type: fsm

fsmFailPkiEpUpdateEp

Fault Code:F999619

Message

[FSM:FAILED]: sam:dme:PkiEpUpdateEp

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999619 

mibFaultName: fsmFailPkiEpUpdateEp 

moClass: pki:Ep 

Type: fsm

fsmFailPortPIoInCompatSfpPresence

Fault Code:F1000129

Message

[FSM:FAILED]: sam:dme:PortPIoInCompatSfpPresence

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000129 

mibFaultName: fsmFailPortPIoInCompatSfpPresence 

moClass: port:PIo 

Type: fsm

fsmFailQosclassDefinitionConfigGlobalQoS

Fault Code:F999785

Message

[FSM:FAILED]: sam:dme:QosclassDefinitionConfigGlobalQoS

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999785 

mibFaultName: fsmFailQosclassDefinitionConfigGlobalQoS 

moClass: qosclass:Definition 

Type: fsm

fsmFailStatsCollectionPolicyUpdateEp

Fault Code:F999619

Message

[FSM:FAILED]: sam:dme:StatsCollectionPolicyUpdateEp

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999619 

mibFaultName: fsmFailStatsCollectionPolicyUpdateEp 

moClass: stats:CollectionPolicy 

Type: fsm

fsmFailSwAccessDomainDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:SwAccessDomainDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailSwAccessDomainDeploy 

moClass: sw:AccessDomain 

Type: fsm

fsmFailSwEthLanBorderDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:SwEthLanBorderDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailSwEthLanBorderDeploy 

moClass: sw:EthLanBorder 

Type: fsm

fsmFailSwEthMonDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:SwEthMonDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailSwEthMonDeploy 

moClass: sw:EthMon 

Type: fsm

fsmFailSwFcMonDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:SwFcMonDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailSwFcMonDeploy 

moClass: sw:FcMon 

Type: fsm

fsmFailSwFcSanBorderDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:SwFcSanBorderDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailSwFcSanBorderDeploy 

moClass: sw:FcSanBorder 

Type: fsm

fsmFailSwUtilityDomainDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:SwUtilityDomainDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailSwUtilityDomainDeploy 

moClass: sw:UtilityDomain 

Type: fsm

fsmFailSyntheticFsObjCreate

Fault Code:F999681

Message

[FSM:FAILED]: sam:dme:SyntheticFsObjCreate

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999681 

mibFaultName: fsmFailSyntheticFsObjCreate 

moClass: synthetic:FsObj 

Type: fsm

fsmFailSysdebugAutoCoreFileExportTargetConfigure

Fault Code:F1000035

Message

[FSM:FAILED]: sam:dme:SysdebugAutoCoreFileExportTargetConfigure

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000035 

mibFaultName: fsmFailSysdebugAutoCoreFileExportTargetConfigure 

moClass: sysdebug:AutoCoreFileExportTarget 

Type: fsm

fsmFailSysdebugCoreDownload

Fault Code:F999690

Message

[FSM:FAILED]: sam:dme:SysdebugCoreDownload

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999690 

mibFaultName: fsmFailSysdebugCoreDownload 

moClass: sysdebug:Core 

Type: fsm

fsmFailSysdebugLogControlEpLogControlPersist

Fault Code:F999646

Message

[FSM:FAILED]: sam:dme:SysdebugLogControlEpLogControlPersist

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999646 

mibFaultName: fsmFailSysdebugLogControlEpLogControlPersist 

moClass: sysdebug:LogControlEp 

Type: fsm

fsmFailSysdebugManualCoreFileExportTargetExport

Fault Code:F999644

Message

[FSM:FAILED]: sam:dme:SysdebugManualCoreFileExportTargetExport

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999644 

mibFaultName: fsmFailSysdebugManualCoreFileExportTargetExport 

moClass: sysdebug:ManualCoreFileExportTarget 

Type: fsm

fsmFailSysdebugTechSupportDeleteTechSupFile

Fault Code:F1000053

Message

[FSM:FAILED]: sam:dme:SysdebugTechSupportDeleteTechSupFile

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000053 

mibFaultName: fsmFailSysdebugTechSupportDeleteTechSupFile 

moClass: sysdebug:TechSupport 

Type: fsm

fsmFailSysdebugTechSupportDownload

Fault Code:F999690

Message

[FSM:FAILED]: sam:dme:SysdebugTechSupportDownload

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999690 

mibFaultName: fsmFailSysdebugTechSupportDownload 

moClass: sysdebug:TechSupport 

Type: fsm

fsmFailSysdebugTechSupportInitiate

Fault Code:F1000052

Message

[FSM:FAILED]: sam:dme:SysdebugTechSupportInitiate

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 1000052 

mibFaultName: fsmFailSysdebugTechSupportInitiate 

moClass: sysdebug:TechSupport 

Type: fsm

fsmFailSysfileMutationGlobal

Fault Code:F999641

Message

[FSM:FAILED]: sam:dme:SysfileMutationGlobal

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999641 

mibFaultName: fsmFailSysfileMutationGlobal 

moClass: sysfile:Mutation 

Type: fsm

fsmFailSysfileMutationSingle

Fault Code:F999640

Message

[FSM:FAILED]: sam:dme:SysfileMutationSingle

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999640 

mibFaultName: fsmFailSysfileMutationSingle 

moClass: sysfile:Mutation 

Type: fsm

fsmFailVnicProfileSetDeploy

Fault Code:F999789

Message

[FSM:FAILED]: sam:dme:VnicProfileSetDeploy

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: critical 

Cause: fsm-failed 

mibFaultCode: 999789 

mibFaultName: fsmFailVnicProfileSetDeploy 

moClass: vnic:ProfileSet 

Type: fsm

fsmRmtErrAaaEpUpdateEp:SetEpLocal

Fault Code:F78019

Message

[FSM:STAGE:REMOTE-ERROR]: external aaa server configuration to primary(FSM-STAGE:sam:dme:AaaEpUpdateEp:SetEpLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-local-failed 

mibFaultCode: 78019 

mibFaultName: fsmRmtErrAaaEpUpdateEpSetEpLocal 

moClass: aaa:Ep 

Type: fsm

fsmRmtErrAaaEpUpdateEp:SetEpPeer

Fault Code:F78019

Message

[FSM:STAGE:REMOTE-ERROR]: external aaa server configuration to secondary(FSM-STAGE:sam:dme:AaaEpUpdateEp:SetEpPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-peer-failed 

mibFaultCode: 78019 

mibFaultName: fsmRmtErrAaaEpUpdateEpSetEpPeer 

moClass: aaa:Ep 

Type: fsm

fsmRmtErrAaaRealmUpdateRealm:SetRealmLocal

Fault Code:F78020

Message

[FSM:STAGE:REMOTE-ERROR]: realm configuration to primary(FSM-STAGE:sam:dme:AaaRealmUpdateRealm:SetRealmLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-realm-local-failed 

mibFaultCode: 78020 

mibFaultName: fsmRmtErrAaaRealmUpdateRealmSetRealmLocal 

moClass: aaa:Realm 

Type: fsm

fsmRmtErrAaaRealmUpdateRealm:SetRealmPeer

Fault Code:F78020

Message

[FSM:STAGE:REMOTE-ERROR]: realm configuration to secondary(FSM-STAGE:sam:dme:AaaRealmUpdateRealm:SetRealmPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-realm-peer-failed 

mibFaultCode: 78020 

mibFaultName: fsmRmtErrAaaRealmUpdateRealmSetRealmPeer 

moClass: aaa:Realm 

Type: fsm

fsmRmtErrAaaUserEpUpdateUserEp:SetUserLocal

Fault Code:F78021

Message

[FSM:STAGE:REMOTE-ERROR]: user configuration to primary(FSM-STAGE:sam:dme:AaaUserEpUpdateUserEp:SetUserLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-user-local-failed 

mibFaultCode: 78021 

mibFaultName: fsmRmtErrAaaUserEpUpdateUserEpSetUserLocal 

moClass: aaa:UserEp 

Type: fsm

fsmRmtErrAaaUserEpUpdateUserEp:SetUserPeer

Fault Code:F78021

Message

[FSM:STAGE:REMOTE-ERROR]: user configuration to secondary(FSM-STAGE:sam:dme:AaaUserEpUpdateUserEp:SetUserPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-user-peer-failed 

mibFaultCode: 78021 

mibFaultName: fsmRmtErrAaaUserEpUpdateUserEpSetUserPeer 

moClass: aaa:UserEp 

Type: fsm

fsmRmtErrAdaptorExtEthIfPathReset:Disable

Fault Code:F78292

Message

[FSM:STAGE:REMOTE-ERROR]: Disable path [side]([switchId]) on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorExtEthIfPathReset:Disable)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-failed 

mibFaultCode: 78292 

mibFaultName: fsmRmtErrAdaptorExtEthIfPathResetDisable 

moClass: adaptor:ExtEthIf 

Type: fsm

fsmRmtErrAdaptorExtEthIfPathReset:Enable

Fault Code:F78292

Message

[FSM:STAGE:REMOTE-ERROR]: Enabe path [side]([switchId]) on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorExtEthIfPathReset:Enable)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-failed 

mibFaultCode: 78292 

mibFaultName: fsmRmtErrAdaptorExtEthIfPathResetEnable 

moClass: adaptor:ExtEthIf 

Type: fsm

fsmRmtErrAdaptorHostEthIfCircuitReset:DisableA

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Disable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:DisableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-afailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostEthIfCircuitResetDisableA 

moClass: adaptor:HostEthIf 

Type: fsm

fsmRmtErrAdaptorHostEthIfCircuitReset:DisableB

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Disable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:DisableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-bfailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostEthIfCircuitResetDisableB 

moClass: adaptor:HostEthIf 

Type: fsm

fsmRmtErrAdaptorHostEthIfCircuitReset:EnableA

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Enable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:EnableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-afailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostEthIfCircuitResetEnableA 

moClass: adaptor:HostEthIf 

Type: fsm

fsmRmtErrAdaptorHostEthIfCircuitReset:EnableB

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Enable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:EnableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-bfailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostEthIfCircuitResetEnableB 

moClass: adaptor:HostEthIf 

Type: fsm

fsmRmtErrAdaptorHostFcIfCircuitReset:DisableA

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Disable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:DisableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-afailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostFcIfCircuitResetDisableA 

moClass: adaptor:HostFcIf 

Type: fsm

fsmRmtErrAdaptorHostFcIfCircuitReset:DisableB

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Disable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:DisableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-bfailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostFcIfCircuitResetDisableB 

moClass: adaptor:HostFcIf 

Type: fsm

fsmRmtErrAdaptorHostFcIfCircuitReset:EnableA

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Enable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:EnableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-afailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostFcIfCircuitResetEnableA 

moClass: adaptor:HostFcIf 

Type: fsm

fsmRmtErrAdaptorHostFcIfCircuitReset:EnableB

Fault Code:F78297

Message

[FSM:STAGE:REMOTE-ERROR]: Enable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:EnableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-bfailed 

mibFaultCode: 78297 

mibFaultName: fsmRmtErrAdaptorHostFcIfCircuitResetEnableB 

moClass: adaptor:HostFcIf 

Type: fsm

fsmRmtErrAdaptorHostFcIfResetFcPersBinding:ExecuteLocal

Fault Code:F77974

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting FC persistent bindings on host interface [dn](FSM-STAGE:sam:dme:AdaptorHostFcIfResetFcPersBinding:ExecuteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-local-failed 

mibFaultCode: 77974 

mibFaultName: fsmRmtErrAdaptorHostFcIfResetFcPersBindingExecuteLocal 

moClass: adaptor:HostFcIf 

Type: fsm

fsmRmtErrAdaptorHostFcIfResetFcPersBinding:ExecutePeer

Fault Code:F77974

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting FC persistent bindings on host interface [dn](FSM-STAGE:sam:dme:AdaptorHostFcIfResetFcPersBinding:ExecutePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-peer-failed 

mibFaultCode: 77974 

mibFaultName: fsmRmtErrAdaptorHostFcIfResetFcPersBindingExecutePeer 

moClass: adaptor:HostFcIf 

Type: fsm

fsmRmtErrCallhomeEpConfigCallhome:SetLocal

Fault Code:F78110

Message

[FSM:STAGE:REMOTE-ERROR]: call-home configuration on primary(FSM-STAGE:sam:dme:CallhomeEpConfigCallhome:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 78110 

mibFaultName: fsmRmtErrCallhomeEpConfigCallhomeSetLocal 

moClass: callhome:Ep 

Type: fsm

fsmRmtErrCallhomeEpConfigCallhome:SetPeer

Fault Code:F78110

Message

[FSM:STAGE:REMOTE-ERROR]: call-home configuration on secondary(FSM-STAGE:sam:dme:CallhomeEpConfigCallhome:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 78110 

mibFaultName: fsmRmtErrCallhomeEpConfigCallhomeSetPeer 

moClass: callhome:Ep 

Type: fsm

fsmRmtErrCapabilityCatalogueActivateCatalog:ApplyCatalog

Fault Code:F78485

Message

[FSM:STAGE:REMOTE-ERROR]: applying changes to catalog(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:ApplyCatalog)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-catalog-failed 

mibFaultCode: 78485 

mibFaultName: fsmRmtErrCapabilityCatalogueActivateCatalogApplyCatalog 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueActivateCatalog:CopyRemote

Fault Code:F78485

Message

[FSM:STAGE:REMOTE-ERROR]: syncing catalog changes to subordinate(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 78485 

mibFaultName: fsmRmtErrCapabilityCatalogueActivateCatalogCopyRemote 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueActivateCatalog:EvaluateStatus

Fault Code:F78485

Message

[FSM:STAGE:REMOTE-ERROR]: evaluating status of activation(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 78485 

mibFaultName: fsmRmtErrCapabilityCatalogueActivateCatalogEvaluateStatus 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueActivateCatalog:RescanImages

Fault Code:F78485

Message

[FSM:STAGE:REMOTE-ERROR]: rescanning image files(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:RescanImages)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: rescan-images-failed 

mibFaultCode: 78485 

mibFaultName: fsmRmtErrCapabilityCatalogueActivateCatalogRescanImages 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueActivateCatalog:UnpackLocal

Fault Code:F78485

Message

[FSM:STAGE:REMOTE-ERROR]: activating catalog changes(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 78485 

mibFaultName: fsmRmtErrCapabilityCatalogueActivateCatalogUnpackLocal 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncBladeAGLocal

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to local bladeAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncBladeAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-bladeaglocal-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncBladeAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncBladeAGRemote

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to remote bladeAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncBladeAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-bladeagremote-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncBladeAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncHostagentAGLocal

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to local hostagentAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncHostagentAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-hostagentaglocal-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncHostagentAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncHostagentAGRemote

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to remote hostagentAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncHostagentAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-hostagentagremote-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncHostagentAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncNicAGLocal

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to local nicAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncNicAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-nicaglocal-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncNicAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncNicAGRemote

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to remote nicAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncNicAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-nicagremote-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncNicAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncPortAGLocal

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to local portAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncPortAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-portaglocal-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncPortAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:SyncPortAGRemote

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Sending capability catalogue [version] to remote portAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncPortAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-portagremote-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueSyncPortAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityCatalogueDeployCatalogue:finalize

Fault Code:F78371

Message

[FSM:STAGE:REMOTE-ERROR]: Finalizing capability catalogue [version] deployment(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:finalize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: finalize-failed 

mibFaultCode: 78371 

mibFaultName: fsmRmtErrCapabilityCatalogueDeployCatalogueFinalize 

moClass: capability:Catalogue 

Type: fsm

fsmRmtErrCapabilityMgmtExtensionActivateMgmtExt:ApplyCatalog

Fault Code:F78486

Message

[FSM:STAGE:REMOTE-ERROR]: applying changes to catalog(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:ApplyCatalog)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-catalog-failed 

mibFaultCode: 78486 

mibFaultName: fsmRmtErrCapabilityMgmtExtensionActivateMgmtExtApplyCatalog 

moClass: capability:MgmtExtension 

Type: fsm

fsmRmtErrCapabilityMgmtExtensionActivateMgmtExt:CopyRemote

Fault Code:F78486

Message

[FSM:STAGE:REMOTE-ERROR]: syncing management extension changes to subordinate(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 78486 

mibFaultName: fsmRmtErrCapabilityMgmtExtensionActivateMgmtExtCopyRemote 

moClass: capability:MgmtExtension 

Type: fsm

fsmRmtErrCapabilityMgmtExtensionActivateMgmtExt:EvaluateStatus

Fault Code:F78486

Message

[FSM:STAGE:REMOTE-ERROR]: evaluating status of activation(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 78486 

mibFaultName: fsmRmtErrCapabilityMgmtExtensionActivateMgmtExtEvaluateStatus 

moClass: capability:MgmtExtension 

Type: fsm

fsmRmtErrCapabilityMgmtExtensionActivateMgmtExt:RescanImages

Fault Code:F78486

Message

[FSM:STAGE:REMOTE-ERROR]: rescanning image files(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:RescanImages)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: rescan-images-failed 

mibFaultCode: 78486 

mibFaultName: fsmRmtErrCapabilityMgmtExtensionActivateMgmtExtRescanImages 

moClass: capability:MgmtExtension 

Type: fsm

fsmRmtErrCapabilityMgmtExtensionActivateMgmtExt:UnpackLocal

Fault Code:F78486

Message

[FSM:STAGE:REMOTE-ERROR]: activating management extension changes(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 78486 

mibFaultName: fsmRmtErrCapabilityMgmtExtensionActivateMgmtExtUnpackLocal 

moClass: capability:MgmtExtension 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:Apply

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: applying changes to catalog(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:Apply)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterApply 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:CopyRemote

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: syncing catalog files to subordinate(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterCopyRemote 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:DeleteLocal

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: deleting temp image [fileName] on local(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:DeleteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-local-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterDeleteLocal 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:EvaluateStatus

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: evaluating status of update(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterEvaluateStatus 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:Local

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: downloading catalog file [fileName] from [server](FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterLocal 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:RescanImages

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: rescanning image files(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:RescanImages)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: rescan-images-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterRescanImages 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCapabilityUpdaterUpdater:UnpackLocal

Fault Code:F78344

Message

[FSM:STAGE:REMOTE-ERROR]: unpacking catalog file [fileName] on primary(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 78344 

mibFaultName: fsmRmtErrCapabilityUpdaterUpdaterUnpackLocal 

moClass: capability:Updater 

Type: fsm

fsmRmtErrCommSvcEpRestartWebSvc:restart

Fault Code:F78017

Message

[FSM:STAGE:REMOTE-ERROR]: restart web services(FSM-STAGE:sam:dme:CommSvcEpRestartWebSvc:restart)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: restart-failed 

mibFaultCode: 78017 

mibFaultName: fsmRmtErrCommSvcEpRestartWebSvcRestart 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpSettings

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated settings (eg. timezone)(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpSettings)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-settings-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpSettings 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsLocal

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated timezone settings to management controllers.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-local-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsLocal 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsPeer

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated timezone settings to management controllers.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-peer-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsPeer 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsLocal

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated timezone settings to NICs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-adaptors-local-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToAdaptorsLocal 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsPeer

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated timezone settings to NICs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-adaptors-peer-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToAdaptorsPeer 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomLocal

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated timezone settings to FEXs and IOMs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-fex-iom-local-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToFexIomLocal 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomPeer

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: propogate updated timezone settings to FEXs and IOMs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-fex-iom-peer-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToFexIomPeer 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:SetEpLocal

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: communication service [name] configuration to primary(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:SetEpLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-local-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpSetEpLocal 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrCommSvcEpUpdateSvcEp:SetEpPeer

Fault Code:F78016

Message

[FSM:STAGE:REMOTE-ERROR]: communication service [name] configuration to secondary(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:SetEpPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-peer-failed 

mibFaultCode: 78016 

mibFaultName: fsmRmtErrCommSvcEpUpdateSvcEpSetEpPeer 

moClass: comm:SvcEp 

Type: fsm

fsmRmtErrComputeBladeDiag:BiosPostCompletion

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for BIOS POST completion from CIMC on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBiosPostCompletion 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BladeBoot

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Power-on server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:BladeBoot)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBladeBoot 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BladeBootWait

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for system reset on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BladeBootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-wait-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBladeBootWait 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BladePowerOn

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Power on server [chassisId]/[slotId] for diagnostics(FSM-STAGE:sam:dme:ComputeBladeDiag:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBladePowerOn 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BladeReadSmbios

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Read SMBIOS tables on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BladeReadSmbios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-read-smbios-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBladeReadSmbios 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BmcConfigPnuOS

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputeBladeDiag:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBmcConfigPnuOS 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BmcInventory

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Getting inventory of server [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:ComputeBladeDiag:BmcInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-inventory-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBmcInventory 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BmcPresence

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Checking CIMC of server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BmcPresence)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-presence-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBmcPresence 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:BmcShutdownDiagCompleted

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Shutdown server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BmcShutdownDiagCompleted)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-shutdown-diag-completed-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagBmcShutdownDiagCompleted 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:CleanupServerConnSwA

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Cleaning up server [chassisId]/[slotId] interface on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:CleanupServerConnSwA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-server-conn-sw-afailed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagCleanupServerConnSwA 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:CleanupServerConnSwB

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Cleaning up server [chassisId]/[slotId] interface on fabric B(FSM-STAGE:sam:dme:ComputeBladeDiag:CleanupServerConnSwB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-server-conn-sw-bfailed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagCleanupServerConnSwB 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:ConfigFeLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring primary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigFeLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagConfigFeLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:ConfigFePeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring secondary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigFePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagConfigFePeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:ConfigSol

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring SoL access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigSol)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-sol-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagConfigSol 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:ConfigUserAccess

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring external user access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagConfigUserAccess 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:DebugWait

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for debugging for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:DebugWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: debug-wait-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagDebugWait 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:DeriveConfig

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Derive diag config for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:DeriveConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: derive-config-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagDeriveConfig 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:DisableServerConnSwA

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Disable server [chassisId]/[slotId] interface on fabric A after completion of network traffic tests on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:DisableServerConnSwA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-server-conn-sw-afailed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagDisableServerConnSwA 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:DisableServerConnSwB

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Disable server [chassisId]/[slotId] connectivity on fabric B in preparation for network traffic tests on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:DisableServerConnSwB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-server-conn-sw-bfailed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagDisableServerConnSwB 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:EnableServerConnSwA

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Enable server [chassisId]/[slotId] connectivity on fabric A in preparation for network traffic tests on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:EnableServerConnSwA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-server-conn-sw-afailed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagEnableServerConnSwA 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:EnableServerConnSwB

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Enable server [chassisId]/[slotId] connectivity on fabric B in preparation for network traffic tests on fabric B(FSM-STAGE:sam:dme:ComputeBladeDiag:EnableServerConnSwB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-server-conn-sw-bfailed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagEnableServerConnSwB 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:EvaluateStatus

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Evaluating status; diagnostics completed(FSM-STAGE:sam:dme:ComputeBladeDiag:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagEvaluateStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:FabricATrafficTestStatus

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Gather status of network traffic tests on fabric A for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:FabricATrafficTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: fabricatraffic-test-status-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagFabricATrafficTestStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:FabricBTrafficTestStatus

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Gather status of network tests on fabric B for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:FabricBTrafficTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: fabricbtraffic-test-status-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagFabricBTrafficTestStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:GenerateLogWait

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for collection of diagnostic logs from server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:GenerateLogWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: generate-log-wait-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagGenerateLogWait 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:GenerateReport

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Generating report for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:GenerateReport)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: generate-report-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagGenerateReport 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostConnect

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Connect to diagnostics environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-connect-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostConnect 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostDisconnect

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Disconnect diagnostics environment agent for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-disconnect-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostDisconnect 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostIdent

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Identify diagnostics environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-ident-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostIdent 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostInventory

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Perform inventory of server [chassisId]/[slotId] in diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:HostInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-inventory-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostInventory 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostPolicy

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Populate diagnostics environment behavior policy to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-policy-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostPolicy 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostServerDiag

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger diagnostics on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostServerDiag)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-server-diag-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostServerDiag 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:HostServerDiagStatus

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Diagnostics status on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostServerDiagStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-server-diag-status-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagHostServerDiagStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicConfigLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicConfigLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicConfigPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicConfigPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicInventoryLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Retrieve adapter inventory in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicInventoryLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicInventoryLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicInventoryPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Retrieve adapter inventory in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicInventoryPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicInventoryPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicPresenceLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Detect adapter in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicPresenceLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicPresenceLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicPresencePeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Detect adapter in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicPresencePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicPresencePeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicUnconfigLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server [chassisId]/[slotId] diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicUnconfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicUnconfigLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:NicUnconfigPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server [chassisId]/[slotId] diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicUnconfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagNicUnconfigPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:PollMemoryTestStatus

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Check diagnostics environment boot status on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:PollMemoryTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-memory-test-status-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagPollMemoryTestStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:RemoveConfig

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Derive diag config for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:RemoveConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remove-config-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagRemoveConfig 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:RemoveVMediaLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Remove VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:RemoveVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: removevmedia-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagRemoveVMediaLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:RemoveVMediaPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Remove VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:RemoveVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: removevmedia-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagRemoveVMediaPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:RestoreConfigFeLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Reconfiguring primary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:RestoreConfigFeLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: restore-config-fe-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagRestoreConfigFeLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:RestoreConfigFePeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Reconfiguring secondary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:RestoreConfigFePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: restore-config-fe-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagRestoreConfigFePeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SetDiagUser

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Populate diagnostics environment with a user account to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:SetDiagUser)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-diag-user-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSetDiagUser 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SetupVMediaLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Setup VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SetupVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setupvmedia-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSetupVMediaLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SetupVMediaPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Setup VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SetupVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setupvmedia-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSetupVMediaPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:StartFabricATrafficTest

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger network traffic tests on fabric A on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:StartFabricATrafficTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-fabricatraffic-test-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagStartFabricATrafficTest 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:StartFabricBTrafficTest

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger network tests on fabric B for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:StartFabricBTrafficTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-fabricbtraffic-test-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagStartFabricBTrafficTest 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:StartMemoryTestStatus

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Check diagnostics environment boot status on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:StartMemoryTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-memory-test-status-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagStartMemoryTestStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:StopVMediaLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Stop VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:StopVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagStopVMediaLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:StopVMediaPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Stop VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:StopVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagStopVMediaPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SwConfigLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configure primary fabric interconnect in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSwConfigLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SwConfigPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Configure secondary fabric interconnect in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSwConfigPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SwUnconfigLocal

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure primary fabric interconnect for server [chassisId]/[slotId] in diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwUnconfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-local-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSwUnconfigLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:SwUnconfigPeer

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure secondary fabric interconnect for server [chassisId]/[slotId] in diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwUnconfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-peer-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagSwUnconfigPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:UnconfigSol

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure SoL access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:UnconfigSol)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-sol-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagUnconfigSol 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiag:UnconfigUserAccess

Fault Code:F77975

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure external user access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:UnconfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-user-access-failed 

mibFaultCode: 77975 

mibFaultName: fsmRmtErrComputeBladeDiagUnconfigUserAccess 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BiosPostCompletion

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for BIOS POST completion from CIMC on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBiosPostCompletion 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BladeBootPnuos

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: power server [chassisId]/[slotId] on with pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:BladeBootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-pnuos-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBladeBootPnuos 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BladeBootWait

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for system reset on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BladeBootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-wait-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBladeBootWait 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BladePowerOn

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: power on server [chassisId]/[slotId] for discovery(FSM-STAGE:sam:dme:ComputeBladeDiscover:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBladePowerOn 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BladeReadSmbios

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for SMBIOS table from CIMC on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BladeReadSmbios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-read-smbios-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBladeReadSmbios 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BmcConfigPnuOS

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBmcConfigPnuOS 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BmcInventory

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: getting inventory of server [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-inventory-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBmcInventory 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BmcPreConfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcPreConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-pre-config-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBmcPreConfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BmcPreConfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcPreConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-pre-config-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBmcPreConfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BmcPresence

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: checking CIMC of server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcPresence)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-presence-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBmcPresence 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:BmcShutdownDiscovered

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Shutdown the server [chassisId]/[slotId]; deep discovery completed(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcShutdownDiscovered)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-shutdown-discovered-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverBmcShutdownDiscovered 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:ConfigFeLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configuring primary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:ConfigFeLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverConfigFeLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:ConfigFePeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configuring secondary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:ConfigFePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverConfigFePeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:ConfigUserAccess

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configuring external user access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverConfigUserAccess 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:HandlePooling

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Invoke post-discovery policies on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:HandlePooling)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: handle-pooling-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverHandlePooling 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:NicConfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configure primary adapter in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverNicConfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:NicConfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configure secondary adapter in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverNicConfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:NicPresenceLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: detect mezz cards in [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:NicPresenceLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverNicPresenceLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:NicPresencePeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: detect mezz cards in [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:NicPresencePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverNicPresencePeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:NicUnconfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverNicUnconfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:NicUnconfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverNicUnconfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:PnuOSIdent

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Identify pre-boot environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverPnuOSIdent 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:PnuOSInventory

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Perform inventory of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosinventory-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverPnuOSInventory 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:PnuOSPolicy

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Populate pre-boot environment behavior policy to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverPnuOSPolicy 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:PnuOSScrub

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Scrub server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSScrub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosscrub-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverPnuOSScrub 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:PnuOSSelfTest

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger self-test of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverPnuOSSelfTest 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:PreSanitize

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverPreSanitize 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:Sanitize

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSanitize 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:SetupVmediaLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a Virtual Media device with a bootable pre-boot image for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSetupVmediaLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:SetupVmediaPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a Virtual Media device with a bootable pre-boot image for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSetupVmediaPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:SwConfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configure primary fabric interconnect in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSwConfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:SwConfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configure secondary fabric interconnect in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSwConfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:SwUnconfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure primary fabric interconnect for server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSwUnconfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:SwUnconfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure secondary fabric interconnect for server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverSwUnconfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:TeardownVmediaLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the Virtual Media bootable device for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverTeardownVmediaLocal 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:TeardownVmediaPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the Virtual media bootable device for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverTeardownVmediaPeer 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:hagConnect

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Connect to pre-boot environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:hagConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-connect-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverHagConnect 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeDiscover:hagDisconnect

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Disconnect pre-boot environment agent for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:hagDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-disconnect-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeBladeDiscoverHagDisconnect 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeUpdateBoardController:BladePowerOff

Fault Code:F78370

Message

[FSM:STAGE:REMOTE-ERROR]: Power off server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:BladePowerOff)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-off-failed 

mibFaultCode: 78370 

mibFaultName: fsmRmtErrComputeBladeUpdateBoardControllerBladePowerOff 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeUpdateBoardController:BladePowerOn

Fault Code:F78370

Message

[FSM:STAGE:REMOTE-ERROR]: Power on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 78370 

mibFaultName: fsmRmtErrComputeBladeUpdateBoardControllerBladePowerOn 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeUpdateBoardController:PollUpdateStatus

Fault Code:F78370

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for Board Controller update to complete(FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:PollUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-failed 

mibFaultCode: 78370 

mibFaultName: fsmRmtErrComputeBladeUpdateBoardControllerPollUpdateStatus 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeUpdateBoardController:PrepareForUpdate

Fault Code:F78370

Message

[FSM:STAGE:REMOTE-ERROR]: Prepare for BoardController update(FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:PrepareForUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: prepare-for-update-failed 

mibFaultCode: 78370 

mibFaultName: fsmRmtErrComputeBladeUpdateBoardControllerPrepareForUpdate 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputeBladeUpdateBoardController:UpdateRequest

Fault Code:F78370

Message

[FSM:STAGE:REMOTE-ERROR]: Sending Board Controller update request to CIMC(FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:UpdateRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-failed 

mibFaultCode: 78370 

mibFaultName: fsmRmtErrComputeBladeUpdateBoardControllerUpdateRequest 

moClass: compute:Blade 

Type: fsm

fsmRmtErrComputePhysicalActivateAdaptor:ActivateLocal

Fault Code:F78484

Message

[FSM:STAGE:REMOTE-ERROR]: activating backup image of Adaptor(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:ActivateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-local-failed 

mibFaultCode: 78484 

mibFaultName: fsmRmtErrComputePhysicalActivateAdaptorActivateLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalActivateAdaptor:ActivatePeer

Fault Code:F78484

Message

[FSM:STAGE:REMOTE-ERROR]: activating backup image of Adaptor(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:ActivatePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-peer-failed 

mibFaultCode: 78484 

mibFaultName: fsmRmtErrComputePhysicalActivateAdaptorActivatePeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalActivateAdaptor:PowerOn

Fault Code:F78484

Message

[FSM:STAGE:REMOTE-ERROR]: power on the blade(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 78484 

mibFaultName: fsmRmtErrComputePhysicalActivateAdaptorPowerOn 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalActivateAdaptor:Reset

Fault Code:F78484

Message

[FSM:STAGE:REMOTE-ERROR]: reseting the blade(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 78484 

mibFaultName: fsmRmtErrComputePhysicalActivateAdaptorReset 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BiosImgUpdate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update blade BIOS image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BiosImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-img-update-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBiosImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BiosPostCompletion

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for BIOS POST completion from CIMC on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBiosPostCompletion 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BladePowerOff

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Power off server for configuration of service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:BladePowerOff)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-off-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBladePowerOff 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BmcConfigPnuOS

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBmcConfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BmcPreconfigPnuOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcPreconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBmcPreconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BmcPreconfigPnuOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcPreconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBmcPreconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BmcUnconfigPnuOS

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcUnconfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-unconfig-pnuos-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBmcUnconfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BootHost

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Boot host OS for server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BootHost)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-host-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBootHost 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BootPnuos

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Bring-up pre-boot environment for association with [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:BootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-pnuos-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBootPnuos 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:BootWait

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for system reset(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-wait-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateBootWait 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:ConfigSoL

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring SoL interface on server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:ConfigSoL)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-so-lfailed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateConfigSoL 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:ConfigUserAccess

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring external user access(FSM-STAGE:sam:dme:ComputePhysicalAssociate:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateConfigUserAccess 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:ConfigUuid

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure logical UUID for server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:ConfigUuid)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-uuid-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateConfigUuid 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:HbaImgUpdate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update Host Bus Adapter image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HbaImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hba-img-update-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHbaImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:HostOSConfig

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure host OS components on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostosconfig-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHostOSConfig 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:HostOSIdent

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Identify host agent on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostosident-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHostOSIdent 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:HostOSPolicy

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Upload host agent policy to host agent on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostospolicy-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHostOSPolicy 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:HostOSValidate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Validate host OS on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSValidate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostosvalidate-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHostOSValidate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:LocalDiskFwUpdate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update LocalDisk firmware image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:LocalDiskFwUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-disk-fw-update-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateLocalDiskFwUpdate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicConfigHostOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter in server for host OS (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-hostoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicConfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicConfigHostOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter in server for host OS (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-hostospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicConfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicConfigPnuOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicConfigPnuOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicImgUpdate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update adapter image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-img-update-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicUnconfigPnuOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:NicUnconfigPnuOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateNicUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSConfig

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure server with service profile [assignedToDn] pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosconfig-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSConfig 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSIdent

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Identify pre-boot environment agent(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSIdent 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSInventory

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Perform inventory of server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosinventory-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSInventory 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSLocalDiskConfig

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure local disk on server with service profile [assignedToDn] pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSLocalDiskConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuoslocal-disk-config-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSLocalDiskConfig 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSPolicy

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Populate pre-boot environment behavior policy(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSPolicy 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSSelfTest

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger self-test on pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSSelfTest 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSUnloadDrivers

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Unload drivers on server with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSUnloadDrivers)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosunload-drivers-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSUnloadDrivers 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PnuOSValidate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Pre-boot environment validation for association with [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSValidate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosvalidate-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePnuOSValidate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PollBoardCtrlUpdateStatus

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for Board Controller update to complete(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PollBoardCtrlUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-board-ctrl-update-status-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePollBoardCtrlUpdateStatus 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PowerOn

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Power on server for configuration of service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePowerOn 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PreSanitize

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:PrepareForBoot

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Prepare server for booting host OS(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PrepareForBoot)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: prepare-for-boot-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociatePrepareForBoot 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:Sanitize

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration(FSM-STAGE:sam:dme:ComputePhysicalAssociate:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SetupVmediaLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSetupVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SetupVmediaPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSetupVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:StorageCtlrImgUpdate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update storage controller image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:StorageCtlrImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: storage-ctlr-img-update-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateStorageCtlrImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwConfigHostOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure primary fabric interconnect for server host os (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-hostoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwConfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwConfigHostOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure secondary fabric interconnect for server host OS (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-hostospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwConfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwConfigPnuOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure primary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwConfigPnuOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Configure secondary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwConfigPortNivLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: configuring primary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-local-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwConfigPortNivLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwConfigPortNivPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: configuring secondary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-peer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwConfigPortNivPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwUnconfigPnuOSLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure primary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuoslocal-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:SwUnconfigPnuOSPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure secondary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuospeer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateSwUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:TeardownVmediaLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the Virtual Media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateTeardownVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:TeardownVmediaPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the Virtual media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateTeardownVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:UpdateBoardCtrlRequest

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Sending Board Controller update request to CIMC(FSM-STAGE:sam:dme:ComputePhysicalAssociate:UpdateBoardCtrlRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-board-ctrl-request-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateUpdateBoardCtrlRequest 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:activateAdaptorNwFwLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Activate adapter network firmware on(FSM-STAGE:sam:dme:ComputePhysicalAssociate:activateAdaptorNwFwLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-adaptor-nw-fw-local-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateActivateAdaptorNwFwLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:activateAdaptorNwFwPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Activate adapter network firmware on(FSM-STAGE:sam:dme:ComputePhysicalAssociate:activateAdaptorNwFwPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-adaptor-nw-fw-peer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateActivateAdaptorNwFwPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:activateIBMCFw

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Activate CIMC firmware of server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:activateIBMCFw)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activateibmcfw-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateActivateIBMCFw 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:hagHostOSConnect

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Connect to host agent on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:hagHostOSConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-hostosconnect-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHagHostOSConnect 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:hagPnuOSConnect

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Connect to pre-boot environment agent for association with [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:hagPnuOSConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosconnect-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHagPnuOSConnect 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:hagPnuOSDisconnect

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Disconnect pre-boot environment agent(FSM-STAGE:sam:dme:ComputePhysicalAssociate:hagPnuOSDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosdisconnect-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateHagPnuOSDisconnect 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:resetIBMC

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Reset CIMC of server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:resetIBMC)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: resetibmc-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateResetIBMC 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:updateAdaptorNwFwLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update adapter network firmware(FSM-STAGE:sam:dme:ComputePhysicalAssociate:updateAdaptorNwFwLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-adaptor-nw-fw-local-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateUpdateAdaptorNwFwLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:updateAdaptorNwFwPeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update adapter network firmware(FSM-STAGE:sam:dme:ComputePhysicalAssociate:updateAdaptorNwFwPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-adaptor-nw-fw-peer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateUpdateAdaptorNwFwPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:updateIBMCFw

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Update CIMC firmware of server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:updateIBMCFw)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: updateibmcfw-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateUpdateIBMCFw 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:waitForAdaptorNwFwUpdateLocal

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Wait for adapter network firmware update completion(FSM-STAGE:sam:dme:ComputePhysicalAssociate:waitForAdaptorNwFwUpdateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-adaptor-nw-fw-update-local-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateWaitForAdaptorNwFwUpdateLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:waitForAdaptorNwFwUpdatePeer

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Wait for adapter network firmware update completion(FSM-STAGE:sam:dme:ComputePhysicalAssociate:waitForAdaptorNwFwUpdatePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-adaptor-nw-fw-update-peer-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateWaitForAdaptorNwFwUpdatePeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalAssociate:waitForIBMCFwUpdate

Fault Code:F78413

Message

[FSM:STAGE:REMOTE-ERROR]: Wait for CIMC firmware completion on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:waitForIBMCFwUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-foribmcfw-update-failed 

mibFaultCode: 78413 

mibFaultName: fsmRmtErrComputePhysicalAssociateWaitForIBMCFwUpdate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:BiosPostCompletion

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for BIOS POST completion from CIMC on server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryBiosPostCompletion 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:Cleanup

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Completing BIOS recovery mode for server [dn], and shutting it down(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Cleanup)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryCleanup 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:PreSanitize

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:Reset

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting server [dn] power state after BIOS recovery(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryReset 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:Sanitize

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoverySanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:SetupVmediaLocal

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Provisioning a V-Media device with a bootable BIOS image for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoverySetupVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:SetupVmediaPeer

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Provisioning a V-Media device with a bootable BIOS image for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoverySetupVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:Shutdown

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Shutting down server [dn] to prepare for BIOS recovery(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Shutdown)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: shutdown-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryShutdown 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:Start

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Running BIOS recovery on server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Start)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryStart 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:StopVMediaLocal

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:StopVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-local-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryStopVMediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:StopVMediaPeer

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:StopVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-peer-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryStopVMediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:TeardownVmediaLocal

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryTeardownVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:TeardownVmediaPeer

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryTeardownVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalBiosRecovery:Wait

Fault Code:F78424

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for completion of BIOS recovery for server [dn] (up to 10 min)(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Wait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-failed 

mibFaultCode: 78424 

mibFaultName: fsmRmtErrComputePhysicalBiosRecoveryWait 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalCmosReset:BladePowerOn

Fault Code:F78426

Message

[FSM:STAGE:REMOTE-ERROR]: Power on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 78426 

mibFaultName: fsmRmtErrComputePhysicalCmosResetBladePowerOn 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalCmosReset:Execute

Fault Code:F78426

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting CMOS for server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78426 

mibFaultName: fsmRmtErrComputePhysicalCmosResetExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalCmosReset:PreSanitize

Fault Code:F78426

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78426 

mibFaultName: fsmRmtErrComputePhysicalCmosResetPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalCmosReset:ReconfigBios

Fault Code:F78426

Message

[FSM:STAGE:REMOTE-ERROR]: Reconfiguring BIOS Settings and Boot Order of server [serverId] for service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:ReconfigBios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reconfig-bios-failed 

mibFaultCode: 78426 

mibFaultName: fsmRmtErrComputePhysicalCmosResetReconfigBios 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalCmosReset:ReconfigUuid

Fault Code:F78426

Message

[FSM:STAGE:REMOTE-ERROR]: Reconfiguring logical UUID of server [serverId] for service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:ReconfigUuid)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reconfig-uuid-failed 

mibFaultCode: 78426 

mibFaultName: fsmRmtErrComputePhysicalCmosResetReconfigUuid 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalCmosReset:Sanitize

Fault Code:F78426

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78426 

mibFaultName: fsmRmtErrComputePhysicalCmosResetSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalConfigSoL:Execute

Fault Code:F78523

Message

[FSM:STAGE:REMOTE-ERROR]: configuring SoL interface on server [dn](FSM-STAGE:sam:dme:ComputePhysicalConfigSoL:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78523 

mibFaultName: fsmRmtErrComputePhysicalConfigSoLExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDecommission:Execute

Fault Code:F78416

Message

[FSM:STAGE:REMOTE-ERROR]: Decommissioning server [dn](FSM-STAGE:sam:dme:ComputePhysicalDecommission:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78416 

mibFaultName: fsmRmtErrComputePhysicalDecommissionExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDecommission:StopVMediaLocal

Fault Code:F78416

Message

[FSM:STAGE:REMOTE-ERROR]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalDecommission:StopVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-local-failed 

mibFaultCode: 78416 

mibFaultName: fsmRmtErrComputePhysicalDecommissionStopVMediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDecommission:StopVMediaPeer

Fault Code:F78416

Message

[FSM:STAGE:REMOTE-ERROR]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalDecommission:StopVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-peer-failed 

mibFaultCode: 78416 

mibFaultName: fsmRmtErrComputePhysicalDecommissionStopVMediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDiagnosticInterrupt:Execute

Fault Code:F78556

Message

[FSM:STAGE:REMOTE-ERROR]: Execute Diagnostic Interrupt(NMI) for server [dn](FSM-STAGE:sam:dme:ComputePhysicalDiagnosticInterrupt:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78556 

mibFaultName: fsmRmtErrComputePhysicalDiagnosticInterruptExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BiosPostCompletion

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for BIOS POST completion from CIMC on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBiosPostCompletion 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BmcConfigPnuOS

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBmcConfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BmcPreconfigPnuOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcPreconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBmcPreconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BmcPreconfigPnuOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcPreconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBmcPreconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BmcUnconfigPnuOS

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcUnconfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-unconfig-pnuos-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBmcUnconfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BootPnuos

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Bring-up pre-boot environment on server for disassociation with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-pnuos-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBootPnuos 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:BootWait

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for system reset on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-wait-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateBootWait 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:ConfigBios

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring BIOS Defaults on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:ConfigBios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-bios-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateConfigBios 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:ConfigUserAccess

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring external user access(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateConfigUserAccess 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:HandlePooling

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Apply post-disassociation policies to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:HandlePooling)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: handle-pooling-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateHandlePooling 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:NicConfigPnuOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateNicConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:NicConfigPnuOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Configure adapter for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateNicConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:NicUnconfigHostOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure host OS connectivity from server adapter(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-hostoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateNicUnconfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:NicUnconfigHostOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure host OS connectivity from server adapter(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-hostospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateNicUnconfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:NicUnconfigPnuOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateNicUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:NicUnconfigPnuOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateNicUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PnuOSIdent

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Identify pre-boot environment agent on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePnuOSIdent 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PnuOSPolicy

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Populate pre-boot environment behavior policy to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePnuOSPolicy 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PnuOSScrub

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Scrub server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSScrub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosscrub-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePnuOSScrub 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PnuOSSelfTest

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger self-test of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePnuOSSelfTest 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PnuOSUnconfig

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure server from service profile [assignedToDn] pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSUnconfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosunconfig-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePnuOSUnconfig 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PnuOSValidate

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Pre-boot environment validate server for disassociation with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSValidate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosvalidate-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePnuOSValidate 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PowerOn

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Power on server for unconfiguration of service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePowerOn 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:PreSanitize

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociatePreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:Sanitize

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SetupVmediaLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSetupVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SetupVmediaPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSetupVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:Shutdown

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Shutdown server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:Shutdown)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: shutdown-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateShutdown 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwConfigPnuOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Configure primary fabric interconnect for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwConfigPnuOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Configure secondary fabric interconnect for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwConfigPortNivLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: configuring primary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-local-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwConfigPortNivLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwConfigPortNivPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: configuring secondary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-peer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwConfigPortNivPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwUnconfigHostOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure host OS connectivity from server to primary fabric interconnect(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-hostoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwUnconfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwUnconfigHostOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure host OS connectivity from server to secondary fabric interconnect(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-hostospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwUnconfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwUnconfigPnuOSLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure primary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuoslocal-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:SwUnconfigPnuOSPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfigure secondary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuospeer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateSwUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:TeardownVmediaLocal

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the Virtual Media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateTeardownVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:TeardownVmediaPeer

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the Virtual media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateTeardownVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:UnconfigBios

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfiguring BIOS Settings and Boot Order of server [serverId] (service profile [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:UnconfigBios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-bios-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateUnconfigBios 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:UnconfigSoL

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Removing SoL configuration from server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:UnconfigSoL)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-so-lfailed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateUnconfigSoL 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:UnconfigUuid

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Restore original UUID for server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:UnconfigUuid)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-uuid-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateUnconfigUuid 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:hagPnuOSConnect

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Connect to pre-boot environment agent on server for disassociation with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:hagPnuOSConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosconnect-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateHagPnuOSConnect 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalDisassociate:hagPnuOSDisconnect

Fault Code:F78414

Message

[FSM:STAGE:REMOTE-ERROR]: Disconnect pre-boot environment agent for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:hagPnuOSDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosdisconnect-failed 

mibFaultCode: 78414 

mibFaultName: fsmRmtErrComputePhysicalDisassociateHagPnuOSDisconnect 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalHardShutdown:Execute

Fault Code:F78418

Message

[FSM:STAGE:REMOTE-ERROR]: Hard shutdown of server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardShutdown:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78418 

mibFaultName: fsmRmtErrComputePhysicalHardShutdownExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalHardreset:Execute

Fault Code:F78421

Message

[FSM:STAGE:REMOTE-ERROR]: Hard-reset server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardreset:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78421 

mibFaultName: fsmRmtErrComputePhysicalHardresetExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalHardreset:PreSanitize

Fault Code:F78421

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardreset:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78421 

mibFaultName: fsmRmtErrComputePhysicalHardresetPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalHardreset:Sanitize

Fault Code:F78421

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardreset:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78421 

mibFaultName: fsmRmtErrComputePhysicalHardresetSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalPowerCap:Config

Fault Code:F78415

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring power cap of server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowerCap:Config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 78415 

mibFaultName: fsmRmtErrComputePhysicalPowerCapConfig 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalPowercycle:Execute

Fault Code:F78420

Message

[FSM:STAGE:REMOTE-ERROR]: Power-cycle server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowercycle:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78420 

mibFaultName: fsmRmtErrComputePhysicalPowercycleExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalPowercycle:PreSanitize

Fault Code:F78420

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowercycle:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78420 

mibFaultName: fsmRmtErrComputePhysicalPowercyclePreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalPowercycle:Sanitize

Fault Code:F78420

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowercycle:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78420 

mibFaultName: fsmRmtErrComputePhysicalPowercycleSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalResetBmc:Execute

Fault Code:F78427

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting Management Controller on server [dn](FSM-STAGE:sam:dme:ComputePhysicalResetBmc:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78427 

mibFaultName: fsmRmtErrComputePhysicalResetBmcExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalResetKvm:Execute

Fault Code:F78603

Message

[FSM:STAGE:REMOTE-ERROR]: Execute KVM Reset for server [dn](FSM-STAGE:sam:dme:ComputePhysicalResetKvm:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78603 

mibFaultName: fsmRmtErrComputePhysicalResetKvmExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalSoftShutdown:Execute

Fault Code:F78417

Message

[FSM:STAGE:REMOTE-ERROR]: Soft shutdown of server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftShutdown:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78417 

mibFaultName: fsmRmtErrComputePhysicalSoftShutdownExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalSoftreset:Execute

Fault Code:F78422

Message

[FSM:STAGE:REMOTE-ERROR]: Soft-reset server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftreset:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78422 

mibFaultName: fsmRmtErrComputePhysicalSoftresetExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalSoftreset:PreSanitize

Fault Code:F78422

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftreset:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 78422 

mibFaultName: fsmRmtErrComputePhysicalSoftresetPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalSoftreset:Sanitize

Fault Code:F78422

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftreset:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 78422 

mibFaultName: fsmRmtErrComputePhysicalSoftresetSanitize 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalSwConnUpd:A

Fault Code:F78423

Message

[FSM:STAGE:REMOTE-ERROR]: Updating fabric A for server [dn](FSM-STAGE:sam:dme:ComputePhysicalSwConnUpd:A)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: a-failed 

mibFaultCode: 78423 

mibFaultName: fsmRmtErrComputePhysicalSwConnUpdA 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalSwConnUpd:B

Fault Code:F78423

Message

[FSM:STAGE:REMOTE-ERROR]: Updating fabric B for server [dn](FSM-STAGE:sam:dme:ComputePhysicalSwConnUpd:B)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: b-failed 

mibFaultCode: 78423 

mibFaultName: fsmRmtErrComputePhysicalSwConnUpdB 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalTurnup:Execute

Fault Code:F78419

Message

[FSM:STAGE:REMOTE-ERROR]: Power-on server [dn](FSM-STAGE:sam:dme:ComputePhysicalTurnup:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78419 

mibFaultName: fsmRmtErrComputePhysicalTurnupExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUnconfigSoL:Execute

Fault Code:F78524

Message

[FSM:STAGE:REMOTE-ERROR]: removing SoL interface configuration from server [dn](FSM-STAGE:sam:dme:ComputePhysicalUnconfigSoL:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78524 

mibFaultName: fsmRmtErrComputePhysicalUnconfigSoLExecute 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateAdaptor:PollUpdateStatusLocal

Fault Code:F78483

Message

[FSM:STAGE:REMOTE-ERROR]: waiting for update to complete(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PollUpdateStatusLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-local-failed 

mibFaultCode: 78483 

mibFaultName: fsmRmtErrComputePhysicalUpdateAdaptorPollUpdateStatusLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateAdaptor:PollUpdateStatusPeer

Fault Code:F78483

Message

[FSM:STAGE:REMOTE-ERROR]: waiting for update to complete(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PollUpdateStatusPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-peer-failed 

mibFaultCode: 78483 

mibFaultName: fsmRmtErrComputePhysicalUpdateAdaptorPollUpdateStatusPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateAdaptor:PowerOff

Fault Code:F78483

Message

[FSM:STAGE:REMOTE-ERROR]: Power off the server(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PowerOff)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-off-failed 

mibFaultCode: 78483 

mibFaultName: fsmRmtErrComputePhysicalUpdateAdaptorPowerOff 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateAdaptor:PowerOn

Fault Code:F78483

Message

[FSM:STAGE:REMOTE-ERROR]: power on the blade(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 78483 

mibFaultName: fsmRmtErrComputePhysicalUpdateAdaptorPowerOn 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateAdaptor:UpdateRequestLocal

Fault Code:F78483

Message

[FSM:STAGE:REMOTE-ERROR]: sending update request to Adaptor(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:UpdateRequestLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-local-failed 

mibFaultCode: 78483 

mibFaultName: fsmRmtErrComputePhysicalUpdateAdaptorUpdateRequestLocal 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateAdaptor:UpdateRequestPeer

Fault Code:F78483

Message

[FSM:STAGE:REMOTE-ERROR]: sending update request to Adaptor(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:UpdateRequestPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-peer-failed 

mibFaultCode: 78483 

mibFaultName: fsmRmtErrComputePhysicalUpdateAdaptorUpdateRequestPeer 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputePhysicalUpdateExtUsers:Deploy

Fault Code:F78448

Message

[FSM:STAGE:REMOTE-ERROR]: external mgmt user deployment on server [dn] (profile [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalUpdateExtUsers:Deploy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: deploy-failed 

mibFaultCode: 78448 

mibFaultName: fsmRmtErrComputePhysicalUpdateExtUsersDeploy 

moClass: compute:Physical 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BiosPostCompletion

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for BIOS POST completion from CIMC on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBiosPostCompletion 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcConfigPnuOS

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: provisioning a bootable device with a bootable pre-boot image for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcConfigPnuOS 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcConfigureConnLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring connectivity on CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcConfigureConnLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcConfigureConnPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring connectivity on CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcConfigureConnPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcInventory

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: getting inventory of server [id] via CIMC(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-inventory-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcInventory 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcPreconfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcPreconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcPreconfigPnuOSLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcPreconfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcPreconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcPreconfigPnuOSPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcPresence

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: checking CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcPresence)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-presence-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcPresence 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcShutdownDiscovered

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Shutdown the server [id]; deep discovery completed(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcShutdownDiscovered)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-shutdown-discovered-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcShutdownDiscovered 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BmcUnconfigPnuOS

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: unprovisioning the bootable device for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcUnconfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-unconfig-pnuos-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBmcUnconfigPnuOS 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BootPnuos

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: power server [id] on with pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-pnuos-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBootPnuos 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:BootWait

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for system reset on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-wait-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverBootWait 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:ConfigDiscoveryMode

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: setting adapter mode to discovery for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ConfigDiscoveryMode)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-discovery-mode-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverConfigDiscoveryMode 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:ConfigNivMode

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: setting adapter mode to NIV for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ConfigNivMode)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-niv-mode-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverConfigNivMode 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:ConfigUserAccess

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configuring external user access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverConfigUserAccess 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:HandlePooling

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Invoke post-discovery policies on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:HandlePooling)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: handle-pooling-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverHandlePooling 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:NicInventoryLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: detect and get mezz cards information from [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:NicInventoryLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverNicInventoryLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:NicInventoryPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: detect and get mezz cards information from [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:NicInventoryPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverNicInventoryPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSConnStatus

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Explore connectivity of server [id] in pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSConnStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosconn-status-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSConnStatus 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSConnectivity

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Explore connectivity of server [id] in pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosconnectivity-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSConnectivity 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSIdent

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Identify pre-boot environment agent on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSIdent 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSInventory

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Perform inventory of server [id] pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosinventory-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSInventory 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSPolicy

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Populate pre-boot environment behavior policy to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSPolicy 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSScrub

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Scrub server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSScrub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosscrub-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSScrub 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PnuOSSelfTest

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Trigger self-test of server [id] pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPnuOSSelfTest 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:PreSanitize

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Preparing to check hardware configuration server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverPreSanitize 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:ReadSmbios

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for SMBIOS table from CIMC on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ReadSmbios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: read-smbios-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverReadSmbios 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:Sanitize

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Checking hardware configuration server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSanitize 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwConfigPnuOSLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configure primary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwConfigPnuOSLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwConfigPnuOSPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configure secondary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwConfigPnuOSPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwConfigPortNivLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configuring primary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwConfigPortNivLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwConfigPortNivPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: configuring secondary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwConfigPortNivPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwConfigureConnLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwConfigureConnLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwConfigureConnPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwConfigureConnPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwPnuOSConnectivityLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: determine connectivity of server [id] to fabric(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwPnuOSConnectivityLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-pnuosconnectivity-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwPnuOSConnectivityLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwPnuOSConnectivityPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: determine connectivity of server [id] to fabric(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwPnuOSConnectivityPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-pnuosconnectivity-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwPnuOSConnectivityPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwUnconfigPortNivLocal

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfiguring primary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwUnconfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-port-niv-local-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwUnconfigPortNivLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:SwUnconfigPortNivPeer

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfiguring secondary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwUnconfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-port-niv-peer-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverSwUnconfigPortNivPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:hagConnect

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Connect to pre-boot environment agent on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:hagConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-connect-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverHagConnect 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:hagDisconnect

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: Disconnect pre-boot environment agent for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:hagDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-disconnect-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverHagDisconnect 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitDiscover:waitForConnReady

Fault Code:F77960

Message

[FSM:STAGE:REMOTE-ERROR]: wait for connection to be established(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:waitForConnReady)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-conn-ready-failed 

mibFaultCode: 77960 

mibFaultName: fsmRmtErrComputeRackUnitDiscoverWaitForConnReady 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitOffline:CleanupLocal

Fault Code:F78610

Message

[FSM:STAGE:REMOTE-ERROR]: cleaning host entries on local fabric-interconnect(FSM-STAGE:sam:dme:ComputeRackUnitOffline:CleanupLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-local-failed 

mibFaultCode: 78610 

mibFaultName: fsmRmtErrComputeRackUnitOfflineCleanupLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitOffline:CleanupPeer

Fault Code:F78610

Message

[FSM:STAGE:REMOTE-ERROR]: cleaning host entries on peer fabric-interconnect(FSM-STAGE:sam:dme:ComputeRackUnitOffline:CleanupPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-peer-failed 

mibFaultCode: 78610 

mibFaultName: fsmRmtErrComputeRackUnitOfflineCleanupPeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitOffline:SwUnconfigureLocal

Fault Code:F78610

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfiguring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitOffline:SwUnconfigureLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfigure-local-failed 

mibFaultCode: 78610 

mibFaultName: fsmRmtErrComputeRackUnitOfflineSwUnconfigureLocal 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrComputeRackUnitOffline:SwUnconfigurePeer

Fault Code:F78610

Message

[FSM:STAGE:REMOTE-ERROR]: Unconfiguring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitOffline:SwUnconfigurePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfigure-peer-failed 

mibFaultCode: 78610 

mibFaultName: fsmRmtErrComputeRackUnitOfflineSwUnconfigurePeer 

moClass: compute:RackUnit 

Type: fsm

fsmRmtErrEpqosDefinitionDelTaskRemove:Local

Fault Code:F78190

Message

[FSM:STAGE:REMOTE-ERROR]: vnic qos policy [name] removal from primary(FSM-STAGE:sam:dme:EpqosDefinitionDelTaskRemove:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78190 

mibFaultName: fsmRmtErrEpqosDefinitionDelTaskRemoveLocal 

moClass: epqos:DefinitionDelTask 

Type: fsm

fsmRmtErrEpqosDefinitionDelTaskRemove:Peer

Fault Code:F78190

Message

[FSM:STAGE:REMOTE-ERROR]: vnic qos policy [name] removal from secondary(FSM-STAGE:sam:dme:EpqosDefinitionDelTaskRemove:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78190 

mibFaultName: fsmRmtErrEpqosDefinitionDelTaskRemovePeer 

moClass: epqos:DefinitionDelTask 

Type: fsm

fsmRmtErrEpqosDefinitionDeploy:Local

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: vnic qos policy [name] configuration to primary(FSM-STAGE:sam:dme:EpqosDefinitionDeploy:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrEpqosDefinitionDeployLocal 

moClass: epqos:Definition 

Type: fsm

fsmRmtErrEpqosDefinitionDeploy:Peer

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: vnic qos policy [name] configuration to secondary(FSM-STAGE:sam:dme:EpqosDefinitionDeploy:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrEpqosDefinitionDeployPeer 

moClass: epqos:Definition 

Type: fsm

fsmRmtErrEquipmentChassisDynamicReallocation:Config

Fault Code:F78574

Message

[FSM:STAGE:REMOTE-ERROR]: (FSM-STAGE:sam:dme:EquipmentChassisDynamicReallocation:Config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 78574 

mibFaultName: fsmRmtErrEquipmentChassisDynamicReallocationConfig 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisPowerCap:Config

Fault Code:F78415

Message

[FSM:STAGE:REMOTE-ERROR]: (FSM-STAGE:sam:dme:EquipmentChassisPowerCap:Config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 78415 

mibFaultName: fsmRmtErrEquipmentChassisPowerCapConfig 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisPsuPolicyConfig:Execute

Fault Code:F77973

Message

[FSM:STAGE:REMOTE-ERROR]: Deploying Power Management policy changes on chassis [id](FSM-STAGE:sam:dme:EquipmentChassisPsuPolicyConfig:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 77973 

mibFaultName: fsmRmtErrEquipmentChassisPsuPolicyConfigExecute 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisRemoveChassis:DisableEndPoint

Fault Code:F77847

Message

[FSM:STAGE:REMOTE-ERROR]: unconfiguring access to chassis [id](FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:DisableEndPoint)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-end-point-failed 

mibFaultCode: 77847 

mibFaultName: fsmRmtErrEquipmentChassisRemoveChassisDisableEndPoint 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisRemoveChassis:UnIdentifyLocal

Fault Code:F77847

Message

[FSM:STAGE:REMOTE-ERROR]: erasing chassis identity [id] from primary(FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:UnIdentifyLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: un-identify-local-failed 

mibFaultCode: 77847 

mibFaultName: fsmRmtErrEquipmentChassisRemoveChassisUnIdentifyLocal 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisRemoveChassis:UnIdentifyPeer

Fault Code:F77847

Message

[FSM:STAGE:REMOTE-ERROR]: erasing chassis identity [id] from secondary(FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:UnIdentifyPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: un-identify-peer-failed 

mibFaultCode: 77847 

mibFaultName: fsmRmtErrEquipmentChassisRemoveChassisUnIdentifyPeer 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisRemoveChassis:Wait

Fault Code:F77847

Message

[FSM:STAGE:REMOTE-ERROR]: waiting for clean up of resources for chassis [id] (approx. 2 min)(FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:Wait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-failed 

mibFaultCode: 77847 

mibFaultName: fsmRmtErrEquipmentChassisRemoveChassisWait 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentChassisRemoveChassis:decomission

Fault Code:F77847

Message

[FSM:STAGE:REMOTE-ERROR]: decomissioning chassis [id](FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:decomission)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: decomission-failed 

mibFaultCode: 77847 

mibFaultName: fsmRmtErrEquipmentChassisRemoveChassisDecomission 

moClass: equipment:Chassis 

Type: fsm

fsmRmtErrEquipmentFexRemoveFex:CleanupEntries

Fault Code:F78382

Message

[FSM:STAGE:REMOTE-ERROR]: cleaning host entries(FSM-STAGE:sam:dme:EquipmentFexRemoveFex:CleanupEntries)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-entries-failed 

mibFaultCode: 78382 

mibFaultName: fsmRmtErrEquipmentFexRemoveFexCleanupEntries 

moClass: equipment:Fex 

Type: fsm

fsmRmtErrEquipmentFexRemoveFex:UnIdentifyLocal

Fault Code:F78382

Message

[FSM:STAGE:REMOTE-ERROR]: erasing fex identity [id] from primary(FSM-STAGE:sam:dme:EquipmentFexRemoveFex:UnIdentifyLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: un-identify-local-failed 

mibFaultCode: 78382 

mibFaultName: fsmRmtErrEquipmentFexRemoveFexUnIdentifyLocal 

moClass: equipment:Fex 

Type: fsm

fsmRmtErrEquipmentFexRemoveFex:Wait

Fault Code:F78382

Message

[FSM:STAGE:REMOTE-ERROR]: waiting for clean up of resources for chassis [id] (approx. 2 min)(FSM-STAGE:sam:dme:EquipmentFexRemoveFex:Wait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-failed 

mibFaultCode: 78382 

mibFaultName: fsmRmtErrEquipmentFexRemoveFexWait 

moClass: equipment:Fex 

Type: fsm

fsmRmtErrEquipmentFexRemoveFex:decomission

Fault Code:F78382

Message

[FSM:STAGE:REMOTE-ERROR]: decomissioning fex [id](FSM-STAGE:sam:dme:EquipmentFexRemoveFex:decomission)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: decomission-failed 

mibFaultCode: 78382 

mibFaultName: fsmRmtErrEquipmentFexRemoveFexDecomission 

moClass: equipment:Fex 

Type: fsm

fsmRmtErrEquipmentIOCardFeConn:ConfigureEndPoint

Fault Code:F77846

Message

[FSM:STAGE:REMOTE-ERROR]: configuring management identity to IOM [chassisId]/[id]([side])(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:ConfigureEndPoint)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: configure-end-point-failed 

mibFaultCode: 77846 

mibFaultName: fsmRmtErrEquipmentIOCardFeConnConfigureEndPoint 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardFeConn:ConfigureSwMgmtEndPoint

Fault Code:F77846

Message

[FSM:STAGE:REMOTE-ERROR]: configuring fabric interconnect [switchId] mgmt connectivity to IOM [chassisId]/[id]([side])(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:ConfigureSwMgmtEndPoint)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: configure-sw-mgmt-end-point-failed 

mibFaultCode: 77846 

mibFaultName: fsmRmtErrEquipmentIOCardFeConnConfigureSwMgmtEndPoint 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardFeConn:ConfigureVifNs

Fault Code:F77846

Message

[FSM:STAGE:REMOTE-ERROR]: configuring IOM [chassisId]/[id]([side]) virtual name space(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:ConfigureVifNs)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: configure-vif-ns-failed 

mibFaultCode: 77846 

mibFaultName: fsmRmtErrEquipmentIOCardFeConnConfigureVifNs 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardFeConn:DiscoverChassis

Fault Code:F77846

Message

[FSM:STAGE:REMOTE-ERROR]: triggerring chassis discovery via IOM [chassisId]/[id]([side])(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:DiscoverChassis)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: discover-chassis-failed 

mibFaultCode: 77846 

mibFaultName: fsmRmtErrEquipmentIOCardFeConnDiscoverChassis 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardFeConn:EnableChassis

Fault Code:F77846

Message

[FSM:STAGE:REMOTE-ERROR]: enabling chassis [chassisId] on [side] side(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:EnableChassis)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-chassis-failed 

mibFaultCode: 77846 

mibFaultName: fsmRmtErrEquipmentIOCardFeConnEnableChassis 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardFePresence:CheckLicense

Fault Code:F77845

Message

[FSM:STAGE:REMOTE-ERROR]: Checking license for chassis [chassisId] (iom [id])(FSM-STAGE:sam:dme:EquipmentIOCardFePresence:CheckLicense)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: check-license-failed 

mibFaultCode: 77845 

mibFaultName: fsmRmtErrEquipmentIOCardFePresenceCheckLicense 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardFePresence:Identify

Fault Code:F77845

Message

[FSM:STAGE:REMOTE-ERROR]: identifying IOM [chassisId]/[id](FSM-STAGE:sam:dme:EquipmentIOCardFePresence:Identify)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: identify-failed 

mibFaultCode: 77845 

mibFaultName: fsmRmtErrEquipmentIOCardFePresenceIdentify 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardMuxOffline:CleanupEntries

Fault Code:F78385

Message

[FSM:STAGE:REMOTE-ERROR]: cleaning host entries(FSM-STAGE:sam:dme:EquipmentIOCardMuxOffline:CleanupEntries)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-entries-failed 

mibFaultCode: 78385 

mibFaultName: fsmRmtErrEquipmentIOCardMuxOfflineCleanupEntries 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardResetCmc:Execute

Fault Code:F78243

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting Chassis Management Controller on IOM [chassisId]/[id](FSM-STAGE:sam:dme:EquipmentIOCardResetCmc:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78243 

mibFaultName: fsmRmtErrEquipmentIOCardResetCmcExecute 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentIOCardResetIom:Execute

Fault Code:F78428

Message

[FSM:STAGE:REMOTE-ERROR]: Reset IOM [id] on Fex [chassisId](FSM-STAGE:sam:dme:EquipmentIOCardResetIom:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78428 

mibFaultName: fsmRmtErrEquipmentIOCardResetIomExecute 

moClass: equipment:IOCard 

Type: fsm

fsmRmtErrEquipmentLocatorLedSetFeLocatorLed:Execute

Fault Code:F78383

Message

[FSM:STAGE:REMOTE-ERROR]: setting locator led to [adminState](FSM-STAGE:sam:dme:EquipmentLocatorLedSetFeLocatorLed:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78383 

mibFaultName: fsmRmtErrEquipmentLocatorLedSetFeLocatorLedExecute 

moClass: equipment:LocatorLed 

Type: fsm

fsmRmtErrEquipmentLocatorLedSetLocatorLed:Execute

Fault Code:F77848

Message

[FSM:STAGE:REMOTE-ERROR]: setting locator led to [adminState](FSM-STAGE:sam:dme:EquipmentLocatorLedSetLocatorLed:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 77848 

mibFaultName: fsmRmtErrEquipmentLocatorLedSetLocatorLedExecute 

moClass: equipment:LocatorLed 

Type: fsm

fsmRmtErrExtvmmKeyStoreCertInstall:SetLocal

Fault Code:F78320

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager cetificate configuration on local fabric(FSM-STAGE:sam:dme:ExtvmmKeyStoreCertInstall:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 78320 

mibFaultName: fsmRmtErrExtvmmKeyStoreCertInstallSetLocal 

moClass: extvmm:KeyStore 

Type: fsm

fsmRmtErrExtvmmKeyStoreCertInstall:SetPeer

Fault Code:F78320

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager certificate configuration on peer fabric(FSM-STAGE:sam:dme:ExtvmmKeyStoreCertInstall:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 78320 

mibFaultName: fsmRmtErrExtvmmKeyStoreCertInstallSetPeer 

moClass: extvmm:KeyStore 

Type: fsm

fsmRmtErrExtvmmMasterExtKeyConfig:SetLocal

Fault Code:F78319

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager extension-key configuration on peer fabric(FSM-STAGE:sam:dme:ExtvmmMasterExtKeyConfig:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 78319 

mibFaultName: fsmRmtErrExtvmmMasterExtKeyConfigSetLocal 

moClass: extvmm:MasterExtKey 

Type: fsm

fsmRmtErrExtvmmMasterExtKeyConfig:SetPeer

Fault Code:F78319

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager extension-key configuration on local fabric(FSM-STAGE:sam:dme:ExtvmmMasterExtKeyConfig:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 78319 

mibFaultName: fsmRmtErrExtvmmMasterExtKeyConfigSetPeer 

moClass: extvmm:MasterExtKey 

Type: fsm

fsmRmtErrExtvmmProviderConfig:GetVersion

Fault Code:F78319

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager version fetch(FSM-STAGE:sam:dme:ExtvmmProviderConfig:GetVersion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: get-version-failed 

mibFaultCode: 78319 

mibFaultName: fsmRmtErrExtvmmProviderConfigGetVersion 

moClass: extvmm:Provider 

Type: fsm

fsmRmtErrExtvmmProviderConfig:SetLocal

Fault Code:F78319

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager configuration on local fabric(FSM-STAGE:sam:dme:ExtvmmProviderConfig:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 78319 

mibFaultName: fsmRmtErrExtvmmProviderConfigSetLocal 

moClass: extvmm:Provider 

Type: fsm

fsmRmtErrExtvmmProviderConfig:SetPeer

Fault Code:F78319

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager configuration on peer fabric(FSM-STAGE:sam:dme:ExtvmmProviderConfig:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 78319 

mibFaultName: fsmRmtErrExtvmmProviderConfigSetPeer 

moClass: extvmm:Provider 

Type: fsm

fsmRmtErrExtvmmSwitchDelTaskRemoveProvider:RemoveLocal

Fault Code:F78321

Message

[FSM:STAGE:REMOTE-ERROR]: external VM manager deletion from local fabric(FSM-STAGE:sam:dme:ExtvmmSwitchDelTaskRemoveProvider:RemoveLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remove-local-failed 

mibFaultCode: 78321 

mibFaultName: fsmRmtErrExtvmmSwitchDelTaskRemoveProviderRemoveLocal 

moClass: extvmm:SwitchDelTask 

Type: fsm

fsmRmtErrFabricComputeSlotEpIdentify:ExecuteLocal

Fault Code:F77959

Message

[FSM:STAGE:REMOTE-ERROR]: identifying a server in [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:FabricComputeSlotEpIdentify:ExecuteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-local-failed 

mibFaultCode: 77959 

mibFaultName: fsmRmtErrFabricComputeSlotEpIdentifyExecuteLocal 

moClass: fabric:ComputeSlotEp 

Type: fsm

fsmRmtErrFabricComputeSlotEpIdentify:ExecutePeer

Fault Code:F77959

Message

[FSM:STAGE:REMOTE-ERROR]: identifying a server in [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:FabricComputeSlotEpIdentify:ExecutePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-peer-failed 

mibFaultCode: 77959 

mibFaultName: fsmRmtErrFabricComputeSlotEpIdentifyExecutePeer 

moClass: fabric:ComputeSlotEp 

Type: fsm

fsmRmtErrFabricLanCloudSwitchMode:SwConfigLocal

Fault Code:F77979

Message

[FSM:STAGE:REMOTE-ERROR]: (FSM-STAGE:sam:dme:FabricLanCloudSwitchMode:SwConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-local-failed 

mibFaultCode: 77979 

mibFaultName: fsmRmtErrFabricLanCloudSwitchModeSwConfigLocal 

moClass: fabric:LanCloud 

Type: fsm

fsmRmtErrFabricLanCloudSwitchMode:SwConfigPeer

Fault Code:F77979

Message

[FSM:STAGE:REMOTE-ERROR]: Fabric interconnect mode configuration to primary(FSM-STAGE:sam:dme:FabricLanCloudSwitchMode:SwConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-peer-failed 

mibFaultCode: 77979 

mibFaultName: fsmRmtErrFabricLanCloudSwitchModeSwConfigPeer 

moClass: fabric:LanCloud 

Type: fsm

fsmRmtErrFabricSanCloudSwitchMode:SwConfigLocal

Fault Code:F77979

Message

[FSM:STAGE:REMOTE-ERROR]: (FSM-STAGE:sam:dme:FabricSanCloudSwitchMode:SwConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-local-failed 

mibFaultCode: 77979 

mibFaultName: fsmRmtErrFabricSanCloudSwitchModeSwConfigLocal 

moClass: fabric:SanCloud 

Type: fsm

fsmRmtErrFabricSanCloudSwitchMode:SwConfigPeer

Fault Code:F77979

Message

[FSM:STAGE:REMOTE-ERROR]: Fabric interconnect FC mode configuration to primary(FSM-STAGE:sam:dme:FabricSanCloudSwitchMode:SwConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-peer-failed 

mibFaultCode: 77979 

mibFaultName: fsmRmtErrFabricSanCloudSwitchModeSwConfigPeer 

moClass: fabric:SanCloud 

Type: fsm

fsmRmtErrFirmwareDistributableDelete:Local

Fault Code:F78091

Message

[FSM:STAGE:REMOTE-ERROR]: deleting package [name] from primary(FSM-STAGE:sam:dme:FirmwareDistributableDelete:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78091 

mibFaultName: fsmRmtErrFirmwareDistributableDeleteLocal 

moClass: firmware:Distributable 

Type: fsm

fsmRmtErrFirmwareDistributableDelete:Remote

Fault Code:F78091

Message

[FSM:STAGE:REMOTE-ERROR]: deleting package [name] from secondary(FSM-STAGE:sam:dme:FirmwareDistributableDelete:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 78091 

mibFaultName: fsmRmtErrFirmwareDistributableDeleteRemote 

moClass: firmware:Distributable 

Type: fsm

fsmRmtErrFirmwareDownloaderDownload:CopyRemote

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: sync images to subordinate(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrFirmwareDownloaderDownloadCopyRemote 

moClass: firmware:Downloader 

Type: fsm

fsmRmtErrFirmwareDownloaderDownload:DeleteLocal

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: deleting downloadable [fileName] on local(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:DeleteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-local-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrFirmwareDownloaderDownloadDeleteLocal 

moClass: firmware:Downloader 

Type: fsm

fsmRmtErrFirmwareDownloaderDownload:Local

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: downloading image [fileName] from [server](FSM-STAGE:sam:dme:FirmwareDownloaderDownload:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrFirmwareDownloaderDownloadLocal 

moClass: firmware:Downloader 

Type: fsm

fsmRmtErrFirmwareDownloaderDownload:UnpackLocal

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: unpacking image [fileName] on primary(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrFirmwareDownloaderDownloadUnpackLocal 

moClass: firmware:Downloader 

Type: fsm

fsmRmtErrFirmwareImageDelete:Local

Fault Code:F78091

Message

[FSM:STAGE:REMOTE-ERROR]: deleting image file [name] ([invTag]) from primary(FSM-STAGE:sam:dme:FirmwareImageDelete:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78091 

mibFaultName: fsmRmtErrFirmwareImageDeleteLocal 

moClass: firmware:Image 

Type: fsm

fsmRmtErrFirmwareImageDelete:Remote

Fault Code:F78091

Message

[FSM:STAGE:REMOTE-ERROR]: deleting image file [name] ([invTag]) from secondary(FSM-STAGE:sam:dme:FirmwareImageDelete:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 78091 

mibFaultName: fsmRmtErrFirmwareImageDeleteRemote 

moClass: firmware:Image 

Type: fsm

fsmRmtErrLicenseDownloaderDownload:CopyRemote

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Copy the license file to subordinate for inventory(FSM-STAGE:sam:dme:LicenseDownloaderDownload:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrLicenseDownloaderDownloadCopyRemote 

moClass: license:Downloader 

Type: fsm

fsmRmtErrLicenseDownloaderDownload:DeleteLocal

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: deleting temporary files for [fileName] on local(FSM-STAGE:sam:dme:LicenseDownloaderDownload:DeleteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-local-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrLicenseDownloaderDownloadDeleteLocal 

moClass: license:Downloader 

Type: fsm

fsmRmtErrLicenseDownloaderDownload:DeleteRemote

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: deleting temporary files for [fileName] on subordinate(FSM-STAGE:sam:dme:LicenseDownloaderDownload:DeleteRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-remote-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrLicenseDownloaderDownloadDeleteRemote 

moClass: license:Downloader 

Type: fsm

fsmRmtErrLicenseDownloaderDownload:Local

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: downloading license file [fileName] from [server](FSM-STAGE:sam:dme:LicenseDownloaderDownload:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrLicenseDownloaderDownloadLocal 

moClass: license:Downloader 

Type: fsm

fsmRmtErrLicenseDownloaderDownload:ValidateLocal

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: validation for license file [fileName] on primary(FSM-STAGE:sam:dme:LicenseDownloaderDownload:ValidateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: validate-local-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrLicenseDownloaderDownloadValidateLocal 

moClass: license:Downloader 

Type: fsm

fsmRmtErrLicenseDownloaderDownload:ValidateRemote

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: validation for license file [fileName] on subordinate(FSM-STAGE:sam:dme:LicenseDownloaderDownload:ValidateRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: validate-remote-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrLicenseDownloaderDownloadValidateRemote 

moClass: license:Downloader 

Type: fsm

fsmRmtErrLicenseFileClear:Local

Fault Code:F78492

Message

[FSM:STAGE:REMOTE-ERROR]: Clearing license on primary(FSM-STAGE:sam:dme:LicenseFileClear:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78492 

mibFaultName: fsmRmtErrLicenseFileClearLocal 

moClass: license:File 

Type: fsm

fsmRmtErrLicenseFileClear:Remote

Fault Code:F78492

Message

[FSM:STAGE:REMOTE-ERROR]: Clearing license on subordinate(FSM-STAGE:sam:dme:LicenseFileClear:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 78492 

mibFaultName: fsmRmtErrLicenseFileClearRemote 

moClass: license:File 

Type: fsm

fsmRmtErrLicenseFileInstall:Local

Fault Code:F78491

Message

[FSM:STAGE:REMOTE-ERROR]: Installing license on primary(FSM-STAGE:sam:dme:LicenseFileInstall:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78491 

mibFaultName: fsmRmtErrLicenseFileInstallLocal 

moClass: license:File 

Type: fsm

fsmRmtErrLicenseFileInstall:Remote

Fault Code:F78491

Message

[FSM:STAGE:REMOTE-ERROR]: Installing license on subordinate(FSM-STAGE:sam:dme:LicenseFileInstall:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 78491 

mibFaultName: fsmRmtErrLicenseFileInstallRemote 

moClass: license:File 

Type: fsm

fsmRmtErrLicenseInstanceUpdateFlexlm:Local

Fault Code:F78493

Message

[FSM:STAGE:REMOTE-ERROR]: Updating on primary(FSM-STAGE:sam:dme:LicenseInstanceUpdateFlexlm:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78493 

mibFaultName: fsmRmtErrLicenseInstanceUpdateFlexlmLocal 

moClass: license:Instance 

Type: fsm

fsmRmtErrLicenseInstanceUpdateFlexlm:Remote

Fault Code:F78493

Message

[FSM:STAGE:REMOTE-ERROR]: Updating on subordinate(FSM-STAGE:sam:dme:LicenseInstanceUpdateFlexlm:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 78493 

mibFaultName: fsmRmtErrLicenseInstanceUpdateFlexlmRemote 

moClass: license:Instance 

Type: fsm

fsmRmtErrLsServerConfigure:AnalyzeImpact

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Analyzing changes impact(FSM-STAGE:sam:dme:LsServerConfigure:AnalyzeImpact)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: analyze-impact-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureAnalyzeImpact 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:ApplyConfig

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Applying config to server [pnDn](FSM-STAGE:sam:dme:LsServerConfigure:ApplyConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-config-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureApplyConfig 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:ApplyIdentifiers

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Resolving and applying identifiers(FSM-STAGE:sam:dme:LsServerConfigure:ApplyIdentifiers)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-identifiers-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureApplyIdentifiers 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:ApplyPolicies

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Resolving and applying policies(FSM-STAGE:sam:dme:LsServerConfigure:ApplyPolicies)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-policies-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureApplyPolicies 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:ApplyTemplate

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Applying configuration template [srcTemplName](FSM-STAGE:sam:dme:LsServerConfigure:ApplyTemplate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-template-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureApplyTemplate 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:EvaluateAssociation

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Evaluate association with server [pnDn](FSM-STAGE:sam:dme:LsServerConfigure:EvaluateAssociation)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-association-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureEvaluateAssociation 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:ResolveBootConfig

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Computing binding changes(FSM-STAGE:sam:dme:LsServerConfigure:ResolveBootConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: resolve-boot-config-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureResolveBootConfig 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:WaitForMaintPermission

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for ack or maint window(FSM-STAGE:sam:dme:LsServerConfigure:WaitForMaintPermission)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-maint-permission-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureWaitForMaintPermission 

moClass: ls:Server 

Type: fsm

fsmRmtErrLsServerConfigure:WaitForMaintWindow

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: Waiting for maintenance window(FSM-STAGE:sam:dme:LsServerConfigure:WaitForMaintWindow)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-maint-window-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrLsServerConfigureWaitForMaintWindow 

moClass: ls:Server 

Type: fsm

fsmRmtErrMgmtBackupBackup:backupLocal

Fault Code:F78123

Message

[FSM:STAGE:REMOTE-ERROR]: internal database backup(FSM-STAGE:sam:dme:MgmtBackupBackup:backupLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: backup-local-failed 

mibFaultCode: 78123 

mibFaultName: fsmRmtErrMgmtBackupBackupBackupLocal 

moClass: mgmt:Backup 

Type: fsm

fsmRmtErrMgmtBackupBackup:upload

Fault Code:F78123

Message

[FSM:STAGE:REMOTE-ERROR]: internal system backup(FSM-STAGE:sam:dme:MgmtBackupBackup:upload)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: upload-failed 

mibFaultCode: 78123 

mibFaultName: fsmRmtErrMgmtBackupBackupUpload 

moClass: mgmt:Backup 

Type: fsm

fsmRmtErrMgmtControllerActivateBMC:Activate

Fault Code:F78097

Message

[FSM:STAGE:REMOTE-ERROR]: activating backup image of CIMC(FSM-STAGE:sam:dme:MgmtControllerActivateBMC:Activate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-failed 

mibFaultCode: 78097 

mibFaultName: fsmRmtErrMgmtControllerActivateBMCActivate 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerActivateBMC:Reset

Fault Code:F78097

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting CIMC to boot the activated version(FSM-STAGE:sam:dme:MgmtControllerActivateBMC:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 78097 

mibFaultName: fsmRmtErrMgmtControllerActivateBMCReset 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerActivateIOM:Activate

Fault Code:F78095

Message

[FSM:STAGE:REMOTE-ERROR]: activating backup image of IOM(FSM-STAGE:sam:dme:MgmtControllerActivateIOM:Activate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-failed 

mibFaultCode: 78095 

mibFaultName: fsmRmtErrMgmtControllerActivateIOMActivate 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerActivateIOM:Reset

Fault Code:F78095

Message

[FSM:STAGE:REMOTE-ERROR]: Resetting IOM to boot the activated version(FSM-STAGE:sam:dme:MgmtControllerActivateIOM:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 78095 

mibFaultName: fsmRmtErrMgmtControllerActivateIOMReset 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerExtMgmtIfConfig:Primary

Fault Code:F77958

Message

[FSM:STAGE:REMOTE-ERROR]: external mgmt interface configuration on primary(FSM-STAGE:sam:dme:MgmtControllerExtMgmtIfConfig:Primary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: primary-failed 

mibFaultCode: 77958 

mibFaultName: fsmRmtErrMgmtControllerExtMgmtIfConfigPrimary 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerExtMgmtIfConfig:Secondary

Fault Code:F77958

Message

[FSM:STAGE:REMOTE-ERROR]: external mgmt interface configuration on secondary(FSM-STAGE:sam:dme:MgmtControllerExtMgmtIfConfig:Secondary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: secondary-failed 

mibFaultCode: 77958 

mibFaultName: fsmRmtErrMgmtControllerExtMgmtIfConfigSecondary 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerOnline:BmcConfigureConnLocal

Fault Code:F78609

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring connectivity on CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:BmcConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-local-failed 

mibFaultCode: 78609 

mibFaultName: fsmRmtErrMgmtControllerOnlineBmcConfigureConnLocal 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerOnline:BmcConfigureConnPeer

Fault Code:F78609

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring connectivity on CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:BmcConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-peer-failed 

mibFaultCode: 78609 

mibFaultName: fsmRmtErrMgmtControllerOnlineBmcConfigureConnPeer 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerOnline:SwConfigureConnLocal

Fault Code:F78609

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring fabric-interconnect connectivity to CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:SwConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-local-failed 

mibFaultCode: 78609 

mibFaultName: fsmRmtErrMgmtControllerOnlineSwConfigureConnLocal 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerOnline:SwConfigureConnPeer

Fault Code:F78609

Message

[FSM:STAGE:REMOTE-ERROR]: Configuring fabric-interconnect connectivity to CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:SwConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-peer-failed 

mibFaultCode: 78609 

mibFaultName: fsmRmtErrMgmtControllerOnlineSwConfigureConnPeer 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerSysConfig:Primary

Fault Code:F78263

Message

[FSM:STAGE:REMOTE-ERROR]: system configuration on primary(FSM-STAGE:sam:dme:MgmtControllerSysConfig:Primary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: primary-failed 

mibFaultCode: 78263 

mibFaultName: fsmRmtErrMgmtControllerSysConfigPrimary 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerSysConfig:Secondary

Fault Code:F78263

Message

[FSM:STAGE:REMOTE-ERROR]: system configuration on secondary(FSM-STAGE:sam:dme:MgmtControllerSysConfig:Secondary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: secondary-failed 

mibFaultCode: 78263 

mibFaultName: fsmRmtErrMgmtControllerSysConfigSecondary 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateBMC:PollUpdateStatus

Fault Code:F78096

Message

[FSM:STAGE:REMOTE-ERROR]: waiting for update to complete(FSM-STAGE:sam:dme:MgmtControllerUpdateBMC:PollUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-failed 

mibFaultCode: 78096 

mibFaultName: fsmRmtErrMgmtControllerUpdateBMCPollUpdateStatus 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateBMC:UpdateRequest

Fault Code:F78096

Message

[FSM:STAGE:REMOTE-ERROR]: sending update request to CIMC(FSM-STAGE:sam:dme:MgmtControllerUpdateBMC:UpdateRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-failed 

mibFaultCode: 78096 

mibFaultName: fsmRmtErrMgmtControllerUpdateBMCUpdateRequest 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateIOM:PollUpdateStatus

Fault Code:F78094

Message

[FSM:STAGE:REMOTE-ERROR]: waiting for IOM update(FSM-STAGE:sam:dme:MgmtControllerUpdateIOM:PollUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-failed 

mibFaultCode: 78094 

mibFaultName: fsmRmtErrMgmtControllerUpdateIOMPollUpdateStatus 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateIOM:UpdateRequest

Fault Code:F78094

Message

[FSM:STAGE:REMOTE-ERROR]: sending update request to IOM(FSM-STAGE:sam:dme:MgmtControllerUpdateIOM:UpdateRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-failed 

mibFaultCode: 78094 

mibFaultName: fsmRmtErrMgmtControllerUpdateIOMUpdateRequest 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateSwitch:resetLocal

Fault Code:F78093

Message

[FSM:STAGE:REMOTE-ERROR]: rebooting local fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:resetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-local-failed 

mibFaultCode: 78093 

mibFaultName: fsmRmtErrMgmtControllerUpdateSwitchResetLocal 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateSwitch:resetRemote

Fault Code:F78093

Message

[FSM:STAGE:REMOTE-ERROR]: rebooting remote fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:resetRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-remote-failed 

mibFaultCode: 78093 

mibFaultName: fsmRmtErrMgmtControllerUpdateSwitchResetRemote 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateSwitch:updateLocal

Fault Code:F78093

Message

[FSM:STAGE:REMOTE-ERROR]: updating local fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:updateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-local-failed 

mibFaultCode: 78093 

mibFaultName: fsmRmtErrMgmtControllerUpdateSwitchUpdateLocal 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateSwitch:updateRemote

Fault Code:F78093

Message

[FSM:STAGE:REMOTE-ERROR]: updating peer fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:updateRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-remote-failed 

mibFaultCode: 78093 

mibFaultName: fsmRmtErrMgmtControllerUpdateSwitchUpdateRemote 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateSwitch:verifyLocal

Fault Code:F78093

Message

[FSM:STAGE:REMOTE-ERROR]: verifying boot variables for local fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:verifyLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: verify-local-failed 

mibFaultCode: 78093 

mibFaultName: fsmRmtErrMgmtControllerUpdateSwitchVerifyLocal 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateSwitch:verifyRemote

Fault Code:F78093

Message

[FSM:STAGE:REMOTE-ERROR]: verifying boot variables for remote fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:verifyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: verify-remote-failed 

mibFaultCode: 78093 

mibFaultName: fsmRmtErrMgmtControllerUpdateSwitchVerifyRemote 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateUCSManager:execute

Fault Code:F78255

Message

[FSM:STAGE:REMOTE-ERROR]: Updating UCS Manager firmware(FSM-STAGE:sam:dme:MgmtControllerUpdateUCSManager:execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78255 

mibFaultName: fsmRmtErrMgmtControllerUpdateUCSManagerExecute 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtControllerUpdateUCSManager:start

Fault Code:F78255

Message

[FSM:STAGE:REMOTE-ERROR]: Scheduling UCS manager update(FSM-STAGE:sam:dme:MgmtControllerUpdateUCSManager:start)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-failed 

mibFaultCode: 78255 

mibFaultName: fsmRmtErrMgmtControllerUpdateUCSManagerStart 

moClass: mgmt:Controller 

Type: fsm

fsmRmtErrMgmtIfDisableVip:Peer

Fault Code:F78121

Message

[FSM:STAGE:REMOTE-ERROR]: Disable virtual interface on peer fabric interconnect(FSM-STAGE:sam:dme:MgmtIfDisableVip:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78121 

mibFaultName: fsmRmtErrMgmtIfDisableVipPeer 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtIfEnableHA:Local

Fault Code:F78122

Message

[FSM:STAGE:REMOTE-ERROR]: Transition from single to cluster mode(FSM-STAGE:sam:dme:MgmtIfEnableHA:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78122 

mibFaultName: fsmRmtErrMgmtIfEnableHALocal 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtIfEnableVip:Local

Fault Code:F78120

Message

[FSM:STAGE:REMOTE-ERROR]: Enable virtual interface on local fabric interconnect(FSM-STAGE:sam:dme:MgmtIfEnableVip:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78120 

mibFaultName: fsmRmtErrMgmtIfEnableVipLocal 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtIfSwMgmtInbandIfConfig:Switch

Fault Code:F78114

Message

[FSM:STAGE:REMOTE-ERROR]: configuring the inband interface(FSM-STAGE:sam:dme:MgmtIfSwMgmtInbandIfConfig:Switch)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: switch-failed 

mibFaultCode: 78114 

mibFaultName: fsmRmtErrMgmtIfSwMgmtInbandIfConfigSwitch 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtIfSwMgmtOobIfConfig:Switch

Fault Code:F78113

Message

[FSM:STAGE:REMOTE-ERROR]: configuring the out-of-band interface(FSM-STAGE:sam:dme:MgmtIfSwMgmtOobIfConfig:Switch)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: switch-failed 

mibFaultCode: 78113 

mibFaultName: fsmRmtErrMgmtIfSwMgmtOobIfConfigSwitch 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtIfVirtualIfConfig:Local

Fault Code:F78119

Message

[FSM:STAGE:REMOTE-ERROR]: Updating virtual interface on local fabric interconnect(FSM-STAGE:sam:dme:MgmtIfVirtualIfConfig:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78119 

mibFaultName: fsmRmtErrMgmtIfVirtualIfConfigLocal 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtIfVirtualIfConfig:Remote

Fault Code:F78119

Message

[FSM:STAGE:REMOTE-ERROR]: Updating virtual interface on peer fabric interconnect(FSM-STAGE:sam:dme:MgmtIfVirtualIfConfig:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 78119 

mibFaultName: fsmRmtErrMgmtIfVirtualIfConfigRemote 

moClass: mgmt:If 

Type: fsm

fsmRmtErrMgmtImporterImport:config

Fault Code:F78124

Message

[FSM:STAGE:REMOTE-ERROR]: importing the configuration file(FSM-STAGE:sam:dme:MgmtImporterImport:config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 78124 

mibFaultName: fsmRmtErrMgmtImporterImportConfig 

moClass: mgmt:Importer 

Type: fsm

fsmRmtErrMgmtImporterImport:downloadLocal

Fault Code:F78124

Message

[FSM:STAGE:REMOTE-ERROR]: downloading the configuration file from the remote location(FSM-STAGE:sam:dme:MgmtImporterImport:downloadLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: download-local-failed 

mibFaultCode: 78124 

mibFaultName: fsmRmtErrMgmtImporterImportDownloadLocal 

moClass: mgmt:Importer 

Type: fsm

fsmRmtErrMgmtImporterImport:reportResults

Fault Code:F78124

Message

[FSM:STAGE:REMOTE-ERROR]: Report results of configuration application(FSM-STAGE:sam:dme:MgmtImporterImport:reportResults)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: report-results-failed 

mibFaultCode: 78124 

mibFaultName: fsmRmtErrMgmtImporterImportReportResults 

moClass: mgmt:Importer 

Type: fsm

fsmRmtErrPkiEpUpdateEp:SetKeyRingLocal

Fault Code:F78019

Message

[FSM:STAGE:REMOTE-ERROR]: keyring configuration on primary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-key-ring-local-failed 

mibFaultCode: 78019 

mibFaultName: fsmRmtErrPkiEpUpdateEpSetKeyRingLocal 

moClass: pki:Ep 

Type: fsm

fsmRmtErrPkiEpUpdateEp:SetKeyRingPeer

Fault Code:F78019

Message

[FSM:STAGE:REMOTE-ERROR]: keyring configuration on secondary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-key-ring-peer-failed 

mibFaultCode: 78019 

mibFaultName: fsmRmtErrPkiEpUpdateEpSetKeyRingPeer 

moClass: pki:Ep 

Type: fsm

fsmRmtErrPortPIoInCompatSfpPresence:Shutdown

Fault Code:F78529

Message

[FSM:STAGE:REMOTE-ERROR]: Shutting down port(FSM-STAGE:sam:dme:PortPIoInCompatSfpPresence:Shutdown)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: shutdown-failed 

mibFaultCode: 78529 

mibFaultName: fsmRmtErrPortPIoInCompatSfpPresenceShutdown 

moClass: port:PIo 

Type: fsm

fsmRmtErrQosclassDefinitionConfigGlobalQoS:SetLocal

Fault Code:F78185

Message

[FSM:STAGE:REMOTE-ERROR]: QoS Classification Definition [name] configuration on primary(FSM-STAGE:sam:dme:QosclassDefinitionConfigGlobalQoS:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 78185 

mibFaultName: fsmRmtErrQosclassDefinitionConfigGlobalQoSSetLocal 

moClass: qosclass:Definition 

Type: fsm

fsmRmtErrQosclassDefinitionConfigGlobalQoS:SetPeer

Fault Code:F78185

Message

[FSM:STAGE:REMOTE-ERROR]: QoS Classification Definition [name] configuration on secondary(FSM-STAGE:sam:dme:QosclassDefinitionConfigGlobalQoS:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 78185 

mibFaultName: fsmRmtErrQosclassDefinitionConfigGlobalQoSSetPeer 

moClass: qosclass:Definition 

Type: fsm

fsmRmtErrStatsCollectionPolicyUpdateEp:SetEpA

Fault Code:F78019

Message

[FSM:STAGE:REMOTE-ERROR]: Update endpoint on fabric interconnect A(FSM-STAGE:sam:dme:StatsCollectionPolicyUpdateEp:SetEpA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-afailed 

mibFaultCode: 78019 

mibFaultName: fsmRmtErrStatsCollectionPolicyUpdateEpSetEpA 

moClass: stats:CollectionPolicy 

Type: fsm

fsmRmtErrStatsCollectionPolicyUpdateEp:SetEpB

Fault Code:F78019

Message

[FSM:STAGE:REMOTE-ERROR]: Update endpoint on fabric interconnect B(FSM-STAGE:sam:dme:StatsCollectionPolicyUpdateEp:SetEpB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-bfailed 

mibFaultCode: 78019 

mibFaultName: fsmRmtErrStatsCollectionPolicyUpdateEpSetEpB 

moClass: stats:CollectionPolicy 

Type: fsm

fsmRmtErrSwAccessDomainDeploy:UpdateConnectivity

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: internal network configuration on [switchId](FSM-STAGE:sam:dme:SwAccessDomainDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrSwAccessDomainDeployUpdateConnectivity 

moClass: sw:AccessDomain 

Type: fsm

fsmRmtErrSwEthLanBorderDeploy:UpdateConnectivity

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: Uplink eth port configuration on [switchId](FSM-STAGE:sam:dme:SwEthLanBorderDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrSwEthLanBorderDeployUpdateConnectivity 

moClass: sw:EthLanBorder 

Type: fsm

fsmRmtErrSwEthMonDeploy:UpdateEthMon

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: Ethernet traffic monitor (SPAN)configuration on [switchId](FSM-STAGE:sam:dme:SwEthMonDeploy:UpdateEthMon)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-eth-mon-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrSwEthMonDeployUpdateEthMon 

moClass: sw:EthMon 

Type: fsm

fsmRmtErrSwFcMonDeploy:UpdateFcMon

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: FC traffic monitor (SPAN)configuration on [switchId](FSM-STAGE:sam:dme:SwFcMonDeploy:UpdateFcMon)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-fc-mon-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrSwFcMonDeployUpdateFcMon 

moClass: sw:FcMon 

Type: fsm

fsmRmtErrSwFcSanBorderDeploy:UpdateConnectivity

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: Uplink fc port configuration on [switchId](FSM-STAGE:sam:dme:SwFcSanBorderDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrSwFcSanBorderDeployUpdateConnectivity 

moClass: sw:FcSanBorder 

Type: fsm

fsmRmtErrSwUtilityDomainDeploy:UpdateConnectivity

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: Utility network configuration on [switchId](FSM-STAGE:sam:dme:SwUtilityDomainDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrSwUtilityDomainDeployUpdateConnectivity 

moClass: sw:UtilityDomain 

Type: fsm

fsmRmtErrSyntheticFsObjCreate:createLocal

Fault Code:F78081

Message

[FSM:STAGE:REMOTE-ERROR]: create on primary(FSM-STAGE:sam:dme:SyntheticFsObjCreate:createLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: create-local-failed 

mibFaultCode: 78081 

mibFaultName: fsmRmtErrSyntheticFsObjCreateCreateLocal 

moClass: synthetic:FsObj 

Type: fsm

fsmRmtErrSyntheticFsObjCreate:createRemote

Fault Code:F78081

Message

[FSM:STAGE:REMOTE-ERROR]: create on secondary(FSM-STAGE:sam:dme:SyntheticFsObjCreate:createRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: create-remote-failed 

mibFaultCode: 78081 

mibFaultName: fsmRmtErrSyntheticFsObjCreateCreateRemote 

moClass: synthetic:FsObj 

Type: fsm

fsmRmtErrSysdebugAutoCoreFileExportTargetConfigure:Local

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: configuring automatic core file export service on local(FSM-STAGE:sam:dme:SysdebugAutoCoreFileExportTargetConfigure:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrSysdebugAutoCoreFileExportTargetConfigureLocal 

moClass: sysdebug:AutoCoreFileExportTarget 

Type: fsm

fsmRmtErrSysdebugAutoCoreFileExportTargetConfigure:Peer

Fault Code:F78435

Message

[FSM:STAGE:REMOTE-ERROR]: configuring automatic core file export service on peer(FSM-STAGE:sam:dme:SysdebugAutoCoreFileExportTargetConfigure:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78435 

mibFaultName: fsmRmtErrSysdebugAutoCoreFileExportTargetConfigurePeer 

moClass: sysdebug:AutoCoreFileExportTarget 

Type: fsm

fsmRmtErrSysdebugCoreDownload:CopyPrimary

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Copy the Core file to primary for download(FSM-STAGE:sam:dme:SysdebugCoreDownload:CopyPrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-primary-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugCoreDownloadCopyPrimary 

moClass: sysdebug:Core 

Type: fsm

fsmRmtErrSysdebugCoreDownload:CopySub

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: copy Core file on subordinate switch to tmp directory(FSM-STAGE:sam:dme:SysdebugCoreDownload:CopySub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-sub-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugCoreDownloadCopySub 

moClass: sysdebug:Core 

Type: fsm

fsmRmtErrSysdebugCoreDownload:DeletePrimary

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Delete the Core file from primary switch under tmp directory(FSM-STAGE:sam:dme:SysdebugCoreDownload:DeletePrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-primary-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugCoreDownloadDeletePrimary 

moClass: sysdebug:Core 

Type: fsm

fsmRmtErrSysdebugCoreDownload:DeleteSub

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Delete the Core file from subordinate under tmp directory(FSM-STAGE:sam:dme:SysdebugCoreDownload:DeleteSub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-sub-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugCoreDownloadDeleteSub 

moClass: sysdebug:Core 

Type: fsm

fsmRmtErrSysdebugLogControlEpLogControlPersist:Local

Fault Code:F78046

Message

[FSM:STAGE:REMOTE-ERROR]: persisting LogControl on local(FSM-STAGE:sam:dme:SysdebugLogControlEpLogControlPersist:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78046 

mibFaultName: fsmRmtErrSysdebugLogControlEpLogControlPersistLocal 

moClass: sysdebug:LogControlEp 

Type: fsm

fsmRmtErrSysdebugLogControlEpLogControlPersist:Peer

Fault Code:F78046

Message

[FSM:STAGE:REMOTE-ERROR]: persisting LogControl on peer(FSM-STAGE:sam:dme:SysdebugLogControlEpLogControlPersist:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78046 

mibFaultName: fsmRmtErrSysdebugLogControlEpLogControlPersistPeer 

moClass: sysdebug:LogControlEp 

Type: fsm

fsmRmtErrSysdebugManualCoreFileExportTargetExport:Execute

Fault Code:F78044

Message

[FSM:STAGE:REMOTE-ERROR]: export core file [name] to [hostname](FSM-STAGE:sam:dme:SysdebugManualCoreFileExportTargetExport:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78044 

mibFaultName: fsmRmtErrSysdebugManualCoreFileExportTargetExportExecute 

moClass: sysdebug:ManualCoreFileExportTarget 

Type: fsm

fsmRmtErrSysdebugTechSupportDeleteTechSupFile:Local

Fault Code:F78453

Message

[FSM:STAGE:REMOTE-ERROR]: delete tech-support file from GUI on local(FSM-STAGE:sam:dme:SysdebugTechSupportDeleteTechSupFile:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78453 

mibFaultName: fsmRmtErrSysdebugTechSupportDeleteTechSupFileLocal 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysdebugTechSupportDeleteTechSupFile:peer

Fault Code:F78453

Message

[FSM:STAGE:REMOTE-ERROR]: delete tech-support file from GUI on peer(FSM-STAGE:sam:dme:SysdebugTechSupportDeleteTechSupFile:peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78453 

mibFaultName: fsmRmtErrSysdebugTechSupportDeleteTechSupFilePeer 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysdebugTechSupportDownload:CopyPrimary

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Copy the tech-support file to primary for download(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:CopyPrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-primary-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugTechSupportDownloadCopyPrimary 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysdebugTechSupportDownload:CopySub

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: copy tech-support file on subordinate switch to tmp directory(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:CopySub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-sub-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugTechSupportDownloadCopySub 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysdebugTechSupportDownload:DeletePrimary

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Delete the tech-support file from primary switch under tmp directory(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:DeletePrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-primary-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugTechSupportDownloadDeletePrimary 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysdebugTechSupportDownload:DeleteSub

Fault Code:F78090

Message

[FSM:STAGE:REMOTE-ERROR]: Delete the tech-support file from subordinate under tmp directory(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:DeleteSub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-sub-failed 

mibFaultCode: 78090 

mibFaultName: fsmRmtErrSysdebugTechSupportDownloadDeleteSub 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysdebugTechSupportInitiate:Local

Fault Code:F78452

Message

[FSM:STAGE:REMOTE-ERROR]: create tech-support file from GUI on local(FSM-STAGE:sam:dme:SysdebugTechSupportInitiate:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78452 

mibFaultName: fsmRmtErrSysdebugTechSupportInitiateLocal 

moClass: sysdebug:TechSupport 

Type: fsm

fsmRmtErrSysfileMutationGlobal:Local

Fault Code:F78041

Message

[FSM:STAGE:REMOTE-ERROR]: remove files from local(FSM-STAGE:sam:dme:SysfileMutationGlobal:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78041 

mibFaultName: fsmRmtErrSysfileMutationGlobalLocal 

moClass: sysfile:Mutation 

Type: fsm

fsmRmtErrSysfileMutationGlobal:Peer

Fault Code:F78041

Message

[FSM:STAGE:REMOTE-ERROR]: remove files from peer(FSM-STAGE:sam:dme:SysfileMutationGlobal:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78041 

mibFaultName: fsmRmtErrSysfileMutationGlobalPeer 

moClass: sysfile:Mutation 

Type: fsm

fsmRmtErrSysfileMutationSingle:Execute

Fault Code:F78040

Message

[FSM:STAGE:REMOTE-ERROR]: [action] file [name](FSM-STAGE:sam:dme:SysfileMutationSingle:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 78040 

mibFaultName: fsmRmtErrSysfileMutationSingleExecute 

moClass: sysfile:Mutation 

Type: fsm

fsmRmtErrVnicProfileSetDeploy:Local

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: VNIC profile configuration on local fabric(FSM-STAGE:sam:dme:VnicProfileSetDeploy:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrVnicProfileSetDeployLocal 

moClass: vnic:ProfileSet 

Type: fsm

fsmRmtErrVnicProfileSetDeploy:Peer

Fault Code:F78189

Message

[FSM:STAGE:REMOTE-ERROR]: VNIC profile configuration on peer fabric(FSM-STAGE:sam:dme:VnicProfileSetDeploy:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 78189 

mibFaultName: fsmRmtErrVnicProfileSetDeployPeer 

moClass: vnic:ProfileSet 

Type: fsm

fsmStFailAaaEpUpdateEp:SetEpLocal

Fault Code:F16579

Message

[FSM:STAGE:FAILED|RETRY]: external aaa server configuration to primary(FSM-STAGE:sam:dme:AaaEpUpdateEp:SetEpLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-local-failed 

mibFaultCode: 16579 

mibFaultName: fsmStFailAaaEpUpdateEpSetEpLocal 

moClass: aaa:Ep 

Type: fsm

fsmStFailAaaEpUpdateEp:SetEpPeer

Fault Code:F16579

Message

[FSM:STAGE:FAILED|RETRY]: external aaa server configuration to secondary(FSM-STAGE:sam:dme:AaaEpUpdateEp:SetEpPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-peer-failed 

mibFaultCode: 16579 

mibFaultName: fsmStFailAaaEpUpdateEpSetEpPeer 

moClass: aaa:Ep 

Type: fsm

fsmStFailAaaRealmUpdateRealm:SetRealmLocal

Fault Code:F16580

Message

[FSM:STAGE:FAILED|RETRY]: realm configuration to primary(FSM-STAGE:sam:dme:AaaRealmUpdateRealm:SetRealmLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-realm-local-failed 

mibFaultCode: 16580 

mibFaultName: fsmStFailAaaRealmUpdateRealmSetRealmLocal 

moClass: aaa:Realm 

Type: fsm

fsmStFailAaaRealmUpdateRealm:SetRealmPeer

Fault Code:F16580

Message

[FSM:STAGE:FAILED|RETRY]: realm configuration to secondary(FSM-STAGE:sam:dme:AaaRealmUpdateRealm:SetRealmPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-realm-peer-failed 

mibFaultCode: 16580 

mibFaultName: fsmStFailAaaRealmUpdateRealmSetRealmPeer 

moClass: aaa:Realm 

Type: fsm

fsmStFailAaaUserEpUpdateUserEp:SetUserLocal

Fault Code:F16581

Message

[FSM:STAGE:FAILED|RETRY]: user configuration to primary(FSM-STAGE:sam:dme:AaaUserEpUpdateUserEp:SetUserLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-user-local-failed 

mibFaultCode: 16581 

mibFaultName: fsmStFailAaaUserEpUpdateUserEpSetUserLocal 

moClass: aaa:UserEp 

Type: fsm

fsmStFailAaaUserEpUpdateUserEp:SetUserPeer

Fault Code:F16581

Message

[FSM:STAGE:FAILED|RETRY]: user configuration to secondary(FSM-STAGE:sam:dme:AaaUserEpUpdateUserEp:SetUserPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-user-peer-failed 

mibFaultCode: 16581 

mibFaultName: fsmStFailAaaUserEpUpdateUserEpSetUserPeer 

moClass: aaa:UserEp 

Type: fsm

fsmStFailAdaptorExtEthIfPathReset:Disable

Fault Code:F16852

Message

[FSM:STAGE:FAILED|RETRY]: Disable path [side]([switchId]) on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorExtEthIfPathReset:Disable)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-failed 

mibFaultCode: 16852 

mibFaultName: fsmStFailAdaptorExtEthIfPathResetDisable 

moClass: adaptor:ExtEthIf 

Type: fsm

fsmStFailAdaptorExtEthIfPathReset:Enable

Fault Code:F16852

Message

[FSM:STAGE:FAILED|RETRY]: Enabe path [side]([switchId]) on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorExtEthIfPathReset:Enable)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-failed 

mibFaultCode: 16852 

mibFaultName: fsmStFailAdaptorExtEthIfPathResetEnable 

moClass: adaptor:ExtEthIf 

Type: fsm

fsmStFailAdaptorHostEthIfCircuitReset:DisableA

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Disable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:DisableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-afailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostEthIfCircuitResetDisableA 

moClass: adaptor:HostEthIf 

Type: fsm

fsmStFailAdaptorHostEthIfCircuitReset:DisableB

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Disable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:DisableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-bfailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostEthIfCircuitResetDisableB 

moClass: adaptor:HostEthIf 

Type: fsm

fsmStFailAdaptorHostEthIfCircuitReset:EnableA

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Enable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:EnableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-afailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostEthIfCircuitResetEnableA 

moClass: adaptor:HostEthIf 

Type: fsm

fsmStFailAdaptorHostEthIfCircuitReset:EnableB

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Enable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostEthIfCircuitReset:EnableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-bfailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostEthIfCircuitResetEnableB 

moClass: adaptor:HostEthIf 

Type: fsm

fsmStFailAdaptorHostFcIfCircuitReset:DisableA

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Disable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:DisableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-afailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostFcIfCircuitResetDisableA 

moClass: adaptor:HostFcIf 

Type: fsm

fsmStFailAdaptorHostFcIfCircuitReset:DisableB

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Disable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:DisableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-bfailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostFcIfCircuitResetDisableB 

moClass: adaptor:HostFcIf 

Type: fsm

fsmStFailAdaptorHostFcIfCircuitReset:EnableA

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Enable circuit A for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:EnableA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-afailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostFcIfCircuitResetEnableA 

moClass: adaptor:HostFcIf 

Type: fsm

fsmStFailAdaptorHostFcIfCircuitReset:EnableB

Fault Code:F16857

Message

[FSM:STAGE:FAILED|RETRY]: Enable circuit B for host adaptor [id] on server [chassisId]/[slotId](FSM-STAGE:sam:dme:AdaptorHostFcIfCircuitReset:EnableB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-bfailed 

mibFaultCode: 16857 

mibFaultName: fsmStFailAdaptorHostFcIfCircuitResetEnableB 

moClass: adaptor:HostFcIf 

Type: fsm

fsmStFailAdaptorHostFcIfResetFcPersBinding:ExecuteLocal

Fault Code:F16534

Message

[FSM:STAGE:FAILED|RETRY]: Resetting FC persistent bindings on host interface [dn](FSM-STAGE:sam:dme:AdaptorHostFcIfResetFcPersBinding:ExecuteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-local-failed 

mibFaultCode: 16534 

mibFaultName: fsmStFailAdaptorHostFcIfResetFcPersBindingExecuteLocal 

moClass: adaptor:HostFcIf 

Type: fsm

fsmStFailAdaptorHostFcIfResetFcPersBinding:ExecutePeer

Fault Code:F16534

Message

[FSM:STAGE:FAILED|RETRY]: Resetting FC persistent bindings on host interface [dn](FSM-STAGE:sam:dme:AdaptorHostFcIfResetFcPersBinding:ExecutePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-peer-failed 

mibFaultCode: 16534 

mibFaultName: fsmStFailAdaptorHostFcIfResetFcPersBindingExecutePeer 

moClass: adaptor:HostFcIf 

Type: fsm

fsmStFailCallhomeEpConfigCallhome:SetLocal

Fault Code:F16670

Message

[FSM:STAGE:FAILED|RETRY]: call-home configuration on primary(FSM-STAGE:sam:dme:CallhomeEpConfigCallhome:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 16670 

mibFaultName: fsmStFailCallhomeEpConfigCallhomeSetLocal 

moClass: callhome:Ep 

Type: fsm

fsmStFailCallhomeEpConfigCallhome:SetPeer

Fault Code:F16670

Message

[FSM:STAGE:FAILED|RETRY]: call-home configuration on secondary(FSM-STAGE:sam:dme:CallhomeEpConfigCallhome:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 16670 

mibFaultName: fsmStFailCallhomeEpConfigCallhomeSetPeer 

moClass: callhome:Ep 

Type: fsm

fsmStFailCapabilityCatalogueActivateCatalog:ApplyCatalog

Fault Code:F17045

Message

[FSM:STAGE:FAILED|RETRY]: applying changes to catalog(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:ApplyCatalog)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-catalog-failed 

mibFaultCode: 17045 

mibFaultName: fsmStFailCapabilityCatalogueActivateCatalogApplyCatalog 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueActivateCatalog:CopyRemote

Fault Code:F17045

Message

[FSM:STAGE:FAILED|RETRY]: syncing catalog changes to subordinate(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 17045 

mibFaultName: fsmStFailCapabilityCatalogueActivateCatalogCopyRemote 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueActivateCatalog:EvaluateStatus

Fault Code:F17045

Message

[FSM:STAGE:FAILED|RETRY]: evaluating status of activation(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 17045 

mibFaultName: fsmStFailCapabilityCatalogueActivateCatalogEvaluateStatus 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueActivateCatalog:RescanImages

Fault Code:F17045

Message

[FSM:STAGE:FAILED|RETRY]: rescanning image files(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:RescanImages)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: rescan-images-failed 

mibFaultCode: 17045 

mibFaultName: fsmStFailCapabilityCatalogueActivateCatalogRescanImages 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueActivateCatalog:UnpackLocal

Fault Code:F17045

Message

[FSM:STAGE:FAILED|RETRY]: activating catalog changes(FSM-STAGE:sam:dme:CapabilityCatalogueActivateCatalog:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 17045 

mibFaultName: fsmStFailCapabilityCatalogueActivateCatalogUnpackLocal 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncBladeAGLocal

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to local bladeAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncBladeAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-bladeaglocal-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncBladeAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncBladeAGRemote

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to remote bladeAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncBladeAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-bladeagremote-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncBladeAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncHostagentAGLocal

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to local hostagentAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncHostagentAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-hostagentaglocal-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncHostagentAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncHostagentAGRemote

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to remote hostagentAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncHostagentAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-hostagentagremote-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncHostagentAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncNicAGLocal

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to local nicAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncNicAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-nicaglocal-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncNicAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncNicAGRemote

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to remote nicAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncNicAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-nicagremote-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncNicAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncPortAGLocal

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to local portAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncPortAGLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-portaglocal-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncPortAGLocal 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:SyncPortAGRemote

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Sending capability catalogue [version] to remote portAG(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:SyncPortAGRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sync-portagremote-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueSyncPortAGRemote 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityCatalogueDeployCatalogue:finalize

Fault Code:F16931

Message

[FSM:STAGE:FAILED|RETRY]: Finalizing capability catalogue [version] deployment(FSM-STAGE:sam:dme:CapabilityCatalogueDeployCatalogue:finalize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: finalize-failed 

mibFaultCode: 16931 

mibFaultName: fsmStFailCapabilityCatalogueDeployCatalogueFinalize 

moClass: capability:Catalogue 

Type: fsm

fsmStFailCapabilityMgmtExtensionActivateMgmtExt:ApplyCatalog

Fault Code:F17046

Message

[FSM:STAGE:FAILED|RETRY]: applying changes to catalog(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:ApplyCatalog)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-catalog-failed 

mibFaultCode: 17046 

mibFaultName: fsmStFailCapabilityMgmtExtensionActivateMgmtExtApplyCatalog 

moClass: capability:MgmtExtension 

Type: fsm

fsmStFailCapabilityMgmtExtensionActivateMgmtExt:CopyRemote

Fault Code:F17046

Message

[FSM:STAGE:FAILED|RETRY]: syncing management extension changes to subordinate(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 17046 

mibFaultName: fsmStFailCapabilityMgmtExtensionActivateMgmtExtCopyRemote 

moClass: capability:MgmtExtension 

Type: fsm

fsmStFailCapabilityMgmtExtensionActivateMgmtExt:EvaluateStatus

Fault Code:F17046

Message

[FSM:STAGE:FAILED|RETRY]: evaluating status of activation(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 17046 

mibFaultName: fsmStFailCapabilityMgmtExtensionActivateMgmtExtEvaluateStatus 

moClass: capability:MgmtExtension 

Type: fsm

fsmStFailCapabilityMgmtExtensionActivateMgmtExt:RescanImages

Fault Code:F17046

Message

[FSM:STAGE:FAILED|RETRY]: rescanning image files(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:RescanImages)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: rescan-images-failed 

mibFaultCode: 17046 

mibFaultName: fsmStFailCapabilityMgmtExtensionActivateMgmtExtRescanImages 

moClass: capability:MgmtExtension 

Type: fsm

fsmStFailCapabilityMgmtExtensionActivateMgmtExt:UnpackLocal

Fault Code:F17046

Message

[FSM:STAGE:FAILED|RETRY]: activating management extension changes(FSM-STAGE:sam:dme:CapabilityMgmtExtensionActivateMgmtExt:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 17046 

mibFaultName: fsmStFailCapabilityMgmtExtensionActivateMgmtExtUnpackLocal 

moClass: capability:MgmtExtension 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:Apply

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: applying changes to catalog(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:Apply)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterApply 

moClass: capability:Updater 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:CopyRemote

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: syncing catalog files to subordinate(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterCopyRemote 

moClass: capability:Updater 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:DeleteLocal

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: deleting temp image [fileName] on local(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:DeleteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-local-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterDeleteLocal 

moClass: capability:Updater 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:EvaluateStatus

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: evaluating status of update(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterEvaluateStatus 

moClass: capability:Updater 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:Local

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: downloading catalog file [fileName] from [server](FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterLocal 

moClass: capability:Updater 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:RescanImages

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: rescanning image files(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:RescanImages)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: rescan-images-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterRescanImages 

moClass: capability:Updater 

Type: fsm

fsmStFailCapabilityUpdaterUpdater:UnpackLocal

Fault Code:F16904

Message

[FSM:STAGE:FAILED|RETRY]: unpacking catalog file [fileName] on primary(FSM-STAGE:sam:dme:CapabilityUpdaterUpdater:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 16904 

mibFaultName: fsmStFailCapabilityUpdaterUpdaterUnpackLocal 

moClass: capability:Updater 

Type: fsm

fsmStFailCommSvcEpRestartWebSvc:restart

Fault Code:F16577

Message

[FSM:STAGE:FAILED|RETRY]: restart web services(FSM-STAGE:sam:dme:CommSvcEpRestartWebSvc:restart)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: restart-failed 

mibFaultCode: 16577 

mibFaultName: fsmStFailCommSvcEpRestartWebSvcRestart 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpSettings

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated settings (eg. timezone)(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpSettings)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-settings-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpSettings 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsLocal

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated timezone settings to management controllers.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-local-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsLocal 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsPeer

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated timezone settings to management controllers.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-peer-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsPeer 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsLocal

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated timezone settings to NICs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-adaptors-local-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToAdaptorsLocal 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsPeer

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated timezone settings to NICs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToAdaptorsPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-adaptors-peer-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToAdaptorsPeer 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomLocal

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated timezone settings to FEXs and IOMs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-fex-iom-local-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToFexIomLocal 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomPeer

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: propogate updated timezone settings to FEXs and IOMs.(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:PropogateEpTimeZoneSettingsToFexIomPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: propogate-ep-time-zone-settings-to-fex-iom-peer-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpPropogateEpTimeZoneSettingsToFexIomPeer 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:SetEpLocal

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: communication service [name] configuration to primary(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:SetEpLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-local-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpSetEpLocal 

moClass: comm:SvcEp 

Type: fsm

fsmStFailCommSvcEpUpdateSvcEp:SetEpPeer

Fault Code:F16576

Message

[FSM:STAGE:FAILED|RETRY]: communication service [name] configuration to secondary(FSM-STAGE:sam:dme:CommSvcEpUpdateSvcEp:SetEpPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-peer-failed 

mibFaultCode: 16576 

mibFaultName: fsmStFailCommSvcEpUpdateSvcEpSetEpPeer 

moClass: comm:SvcEp 

Type: fsm

fsmStFailComputeBladeDiag:BiosPostCompletion

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for BIOS POST completion from CIMC on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBiosPostCompletion 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BladeBoot

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Power-on server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:BladeBoot)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBladeBoot 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BladeBootWait

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for system reset on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BladeBootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-wait-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBladeBootWait 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BladePowerOn

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Power on server [chassisId]/[slotId] for diagnostics(FSM-STAGE:sam:dme:ComputeBladeDiag:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBladePowerOn 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BladeReadSmbios

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Read SMBIOS tables on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BladeReadSmbios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-read-smbios-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBladeReadSmbios 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BmcConfigPnuOS

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputeBladeDiag:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBmcConfigPnuOS 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BmcInventory

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Getting inventory of server [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:ComputeBladeDiag:BmcInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-inventory-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBmcInventory 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BmcPresence

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Checking CIMC of server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BmcPresence)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-presence-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBmcPresence 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:BmcShutdownDiagCompleted

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Shutdown server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:BmcShutdownDiagCompleted)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-shutdown-diag-completed-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagBmcShutdownDiagCompleted 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:CleanupServerConnSwA

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Cleaning up server [chassisId]/[slotId] interface on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:CleanupServerConnSwA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-server-conn-sw-afailed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagCleanupServerConnSwA 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:CleanupServerConnSwB

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Cleaning up server [chassisId]/[slotId] interface on fabric B(FSM-STAGE:sam:dme:ComputeBladeDiag:CleanupServerConnSwB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-server-conn-sw-bfailed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagCleanupServerConnSwB 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:ConfigFeLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configuring primary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigFeLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagConfigFeLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:ConfigFePeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configuring secondary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigFePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagConfigFePeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:ConfigSol

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configuring SoL access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigSol)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-sol-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagConfigSol 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:ConfigUserAccess

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configuring external user access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagConfigUserAccess 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:DebugWait

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for debugging for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:DebugWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: debug-wait-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagDebugWait 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:DeriveConfig

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Derive diag config for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:DeriveConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: derive-config-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagDeriveConfig 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:DisableServerConnSwA

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Disable server [chassisId]/[slotId] interface on fabric A after completion of network traffic tests on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:DisableServerConnSwA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-server-conn-sw-afailed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagDisableServerConnSwA 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:DisableServerConnSwB

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Disable server [chassisId]/[slotId] connectivity on fabric B in preparation for network traffic tests on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:DisableServerConnSwB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-server-conn-sw-bfailed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagDisableServerConnSwB 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:EnableServerConnSwA

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Enable server [chassisId]/[slotId] connectivity on fabric A in preparation for network traffic tests on fabric A(FSM-STAGE:sam:dme:ComputeBladeDiag:EnableServerConnSwA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-server-conn-sw-afailed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagEnableServerConnSwA 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:EnableServerConnSwB

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Enable server [chassisId]/[slotId] connectivity on fabric B in preparation for network traffic tests on fabric B(FSM-STAGE:sam:dme:ComputeBladeDiag:EnableServerConnSwB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-server-conn-sw-bfailed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagEnableServerConnSwB 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:EvaluateStatus

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Evaluating status; diagnostics completed(FSM-STAGE:sam:dme:ComputeBladeDiag:EvaluateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-status-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagEvaluateStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:FabricATrafficTestStatus

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Gather status of network traffic tests on fabric A for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:FabricATrafficTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: fabricatraffic-test-status-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagFabricATrafficTestStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:FabricBTrafficTestStatus

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Gather status of network tests on fabric B for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:FabricBTrafficTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: fabricbtraffic-test-status-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagFabricBTrafficTestStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:GenerateLogWait

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for collection of diagnostic logs from server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:GenerateLogWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: generate-log-wait-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagGenerateLogWait 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:GenerateReport

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Generating report for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:GenerateReport)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: generate-report-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagGenerateReport 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostConnect

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Connect to diagnostics environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-connect-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostConnect 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostDisconnect

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Disconnect diagnostics environment agent for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-disconnect-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostDisconnect 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostIdent

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Identify diagnostics environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-ident-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostIdent 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostInventory

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Perform inventory of server [chassisId]/[slotId] in diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:HostInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-inventory-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostInventory 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostPolicy

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Populate diagnostics environment behavior policy to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-policy-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostPolicy 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostServerDiag

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Trigger diagnostics on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostServerDiag)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-server-diag-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostServerDiag 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:HostServerDiagStatus

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Diagnostics status on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:HostServerDiagStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: host-server-diag-status-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagHostServerDiagStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicConfigLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicConfigLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicConfigPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicConfigPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicInventoryLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Retrieve adapter inventory in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicInventoryLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicInventoryLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicInventoryPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Retrieve adapter inventory in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicInventoryPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicInventoryPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicPresenceLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Detect adapter in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicPresenceLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicPresenceLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicPresencePeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Detect adapter in server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:NicPresencePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicPresencePeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicUnconfigLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server [chassisId]/[slotId] diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicUnconfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicUnconfigLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:NicUnconfigPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server [chassisId]/[slotId] diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:NicUnconfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagNicUnconfigPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:PollMemoryTestStatus

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Check diagnostics environment boot status on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:PollMemoryTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-memory-test-status-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagPollMemoryTestStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:RemoveConfig

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Derive diag config for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:RemoveConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remove-config-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagRemoveConfig 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:RemoveVMediaLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Remove VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:RemoveVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: removevmedia-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagRemoveVMediaLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:RemoveVMediaPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Remove VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:RemoveVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: removevmedia-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagRemoveVMediaPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:RestoreConfigFeLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Reconfiguring primary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:RestoreConfigFeLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: restore-config-fe-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagRestoreConfigFeLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:RestoreConfigFePeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Reconfiguring secondary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:RestoreConfigFePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: restore-config-fe-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagRestoreConfigFePeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SetDiagUser

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Populate diagnostics environment with a user account to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:SetDiagUser)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-diag-user-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSetDiagUser 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SetupVMediaLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Setup VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SetupVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setupvmedia-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSetupVMediaLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SetupVMediaPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Setup VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SetupVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setupvmedia-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSetupVMediaPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:StartFabricATrafficTest

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Trigger network traffic tests on fabric A on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:StartFabricATrafficTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-fabricatraffic-test-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagStartFabricATrafficTest 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:StartFabricBTrafficTest

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Trigger network tests on fabric B for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:StartFabricBTrafficTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-fabricbtraffic-test-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagStartFabricBTrafficTest 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:StartMemoryTestStatus

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Check diagnostics environment boot status on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:StartMemoryTestStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-memory-test-status-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagStartMemoryTestStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:StopVMediaLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Stop VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:StopVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagStopVMediaLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:StopVMediaPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Stop VMedia for server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:StopVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagStopVMediaPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SwConfigLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configure primary fabric interconnect in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSwConfigLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SwConfigPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Configure secondary fabric interconnect in server [chassisId]/[slotId] for diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSwConfigPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SwUnconfigLocal

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure primary fabric interconnect for server [chassisId]/[slotId] in diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwUnconfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-local-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSwUnconfigLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:SwUnconfigPeer

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure secondary fabric interconnect for server [chassisId]/[slotId] in diagnostics environment(FSM-STAGE:sam:dme:ComputeBladeDiag:SwUnconfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-peer-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagSwUnconfigPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:UnconfigSol

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure SoL access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:UnconfigSol)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-sol-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagUnconfigSol 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiag:UnconfigUserAccess

Fault Code:F16535

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure external user access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiag:UnconfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-user-access-failed 

mibFaultCode: 16535 

mibFaultName: fsmStFailComputeBladeDiagUnconfigUserAccess 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BiosPostCompletion

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for BIOS POST completion from CIMC on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBiosPostCompletion 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BladeBootPnuos

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: power server [chassisId]/[slotId] on with pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:BladeBootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-pnuos-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBladeBootPnuos 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BladeBootWait

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for system reset on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BladeBootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-boot-wait-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBladeBootWait 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BladePowerOn

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: power on server [chassisId]/[slotId] for discovery(FSM-STAGE:sam:dme:ComputeBladeDiscover:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBladePowerOn 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BladeReadSmbios

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for SMBIOS table from CIMC on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BladeReadSmbios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-read-smbios-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBladeReadSmbios 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BmcConfigPnuOS

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBmcConfigPnuOS 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BmcInventory

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: getting inventory of server [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-inventory-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBmcInventory 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BmcPreConfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcPreConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-pre-config-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBmcPreConfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BmcPreConfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcPreConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-pre-config-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBmcPreConfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BmcPresence

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: checking CIMC of server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcPresence)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-presence-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBmcPresence 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:BmcShutdownDiscovered

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Shutdown the server [chassisId]/[slotId]; deep discovery completed(FSM-STAGE:sam:dme:ComputeBladeDiscover:BmcShutdownDiscovered)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-shutdown-discovered-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverBmcShutdownDiscovered 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:ConfigFeLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configuring primary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:ConfigFeLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverConfigFeLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:ConfigFePeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configuring secondary fabric interconnect access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:ConfigFePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-fe-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverConfigFePeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:ConfigUserAccess

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configuring external user access to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverConfigUserAccess 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:HandlePooling

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Invoke post-discovery policies on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:HandlePooling)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: handle-pooling-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverHandlePooling 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:NicConfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configure primary adapter in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverNicConfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:NicConfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configure secondary adapter in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverNicConfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:NicPresenceLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: detect mezz cards in [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:NicPresenceLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverNicPresenceLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:NicPresencePeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: detect mezz cards in [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:NicPresencePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-presence-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverNicPresencePeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:NicUnconfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverNicUnconfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:NicUnconfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:NicUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverNicUnconfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:PnuOSIdent

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Identify pre-boot environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverPnuOSIdent 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:PnuOSInventory

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Perform inventory of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosinventory-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverPnuOSInventory 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:PnuOSPolicy

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Populate pre-boot environment behavior policy to server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverPnuOSPolicy 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:PnuOSScrub

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Scrub server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSScrub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosscrub-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverPnuOSScrub 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:PnuOSSelfTest

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Trigger self-test of server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverPnuOSSelfTest 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:PreSanitize

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverPreSanitize 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:Sanitize

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSanitize 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:SetupVmediaLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a Virtual Media device with a bootable pre-boot image for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSetupVmediaLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:SetupVmediaPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a Virtual Media device with a bootable pre-boot image for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSetupVmediaPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:SwConfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configure primary fabric interconnect in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSwConfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:SwConfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configure secondary fabric interconnect in [chassisId]/[slotId] for pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSwConfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:SwUnconfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure primary fabric interconnect for server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSwUnconfigPnuOSLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:SwUnconfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure secondary fabric interconnect for server [chassisId]/[slotId] pre-boot environment(FSM-STAGE:sam:dme:ComputeBladeDiscover:SwUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverSwUnconfigPnuOSPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:TeardownVmediaLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the Virtual Media bootable device for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverTeardownVmediaLocal 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:TeardownVmediaPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the Virtual media bootable device for blade [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverTeardownVmediaPeer 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:hagConnect

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Connect to pre-boot environment agent on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:hagConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-connect-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverHagConnect 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeDiscover:hagDisconnect

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Disconnect pre-boot environment agent for server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeDiscover:hagDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-disconnect-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeBladeDiscoverHagDisconnect 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeUpdateBoardController:BladePowerOff

Fault Code:F16930

Message

[FSM:STAGE:FAILED|RETRY]: Power off server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:BladePowerOff)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-off-failed 

mibFaultCode: 16930 

mibFaultName: fsmStFailComputeBladeUpdateBoardControllerBladePowerOff 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeUpdateBoardController:BladePowerOn

Fault Code:F16930

Message

[FSM:STAGE:FAILED|RETRY]: Power on server [chassisId]/[slotId](FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 16930 

mibFaultName: fsmStFailComputeBladeUpdateBoardControllerBladePowerOn 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeUpdateBoardController:PollUpdateStatus

Fault Code:F16930

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for Board Controller update to complete(FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:PollUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-failed 

mibFaultCode: 16930 

mibFaultName: fsmStFailComputeBladeUpdateBoardControllerPollUpdateStatus 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeUpdateBoardController:PrepareForUpdate

Fault Code:F16930

Message

[FSM:STAGE:FAILED|RETRY]: Prepare for BoardController update(FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:PrepareForUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: prepare-for-update-failed 

mibFaultCode: 16930 

mibFaultName: fsmStFailComputeBladeUpdateBoardControllerPrepareForUpdate 

moClass: compute:Blade 

Type: fsm

fsmStFailComputeBladeUpdateBoardController:UpdateRequest

Fault Code:F16930

Message

[FSM:STAGE:FAILED|RETRY]: Sending Board Controller update request to CIMC(FSM-STAGE:sam:dme:ComputeBladeUpdateBoardController:UpdateRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-failed 

mibFaultCode: 16930 

mibFaultName: fsmStFailComputeBladeUpdateBoardControllerUpdateRequest 

moClass: compute:Blade 

Type: fsm

fsmStFailComputePhysicalActivateAdaptor:ActivateLocal

Fault Code:F17044

Message

[FSM:STAGE:FAILED|RETRY]: activating backup image of Adaptor(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:ActivateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-local-failed 

mibFaultCode: 17044 

mibFaultName: fsmStFailComputePhysicalActivateAdaptorActivateLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalActivateAdaptor:ActivatePeer

Fault Code:F17044

Message

[FSM:STAGE:FAILED|RETRY]: activating backup image of Adaptor(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:ActivatePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-peer-failed 

mibFaultCode: 17044 

mibFaultName: fsmStFailComputePhysicalActivateAdaptorActivatePeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalActivateAdaptor:PowerOn

Fault Code:F17044

Message

[FSM:STAGE:FAILED|RETRY]: power on the blade(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 17044 

mibFaultName: fsmStFailComputePhysicalActivateAdaptorPowerOn 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalActivateAdaptor:Reset

Fault Code:F17044

Message

[FSM:STAGE:FAILED|RETRY]: reseting the blade(FSM-STAGE:sam:dme:ComputePhysicalActivateAdaptor:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 17044 

mibFaultName: fsmStFailComputePhysicalActivateAdaptorReset 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BiosImgUpdate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update blade BIOS image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BiosImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-img-update-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBiosImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BiosPostCompletion

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for BIOS POST completion from CIMC on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBiosPostCompletion 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BladePowerOff

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Power off server for configuration of service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:BladePowerOff)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-off-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBladePowerOff 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BmcConfigPnuOS

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBmcConfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BmcPreconfigPnuOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcPreconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBmcPreconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BmcPreconfigPnuOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcPreconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBmcPreconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BmcUnconfigPnuOS

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BmcUnconfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-unconfig-pnuos-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBmcUnconfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BootHost

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Boot host OS for server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BootHost)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-host-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBootHost 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BootPnuos

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Bring-up pre-boot environment for association with [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:BootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-pnuos-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBootPnuos 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:BootWait

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for system reset(FSM-STAGE:sam:dme:ComputePhysicalAssociate:BootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-wait-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateBootWait 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:ConfigSoL

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configuring SoL interface on server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:ConfigSoL)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-so-lfailed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateConfigSoL 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:ConfigUserAccess

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configuring external user access(FSM-STAGE:sam:dme:ComputePhysicalAssociate:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateConfigUserAccess 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:ConfigUuid

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure logical UUID for server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:ConfigUuid)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-uuid-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateConfigUuid 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:HbaImgUpdate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update Host Bus Adapter image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HbaImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hba-img-update-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHbaImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:HostOSConfig

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure host OS components on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostosconfig-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHostOSConfig 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:HostOSIdent

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Identify host agent on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostosident-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHostOSIdent 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:HostOSPolicy

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Upload host agent policy to host agent on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostospolicy-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHostOSPolicy 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:HostOSValidate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Validate host OS on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:HostOSValidate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hostosvalidate-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHostOSValidate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:LocalDiskFwUpdate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update LocalDisk firmware image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:LocalDiskFwUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-disk-fw-update-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateLocalDiskFwUpdate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicConfigHostOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter in server for host OS (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-hostoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicConfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicConfigHostOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter in server for host OS (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-hostospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicConfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicConfigPnuOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicConfigPnuOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicImgUpdate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update adapter image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-img-update-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicUnconfigPnuOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:NicUnconfigPnuOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:NicUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateNicUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSConfig

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure server with service profile [assignedToDn] pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosconfig-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSConfig 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSIdent

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Identify pre-boot environment agent(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSIdent 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSInventory

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Perform inventory of server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosinventory-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSInventory 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSLocalDiskConfig

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure local disk on server with service profile [assignedToDn] pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSLocalDiskConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuoslocal-disk-config-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSLocalDiskConfig 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSPolicy

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Populate pre-boot environment behavior policy(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSPolicy 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSSelfTest

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Trigger self-test on pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSSelfTest 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSUnloadDrivers

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Unload drivers on server with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSUnloadDrivers)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosunload-drivers-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSUnloadDrivers 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PnuOSValidate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Pre-boot environment validation for association with [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:PnuOSValidate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosvalidate-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePnuOSValidate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PollBoardCtrlUpdateStatus

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for Board Controller update to complete(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PollBoardCtrlUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-board-ctrl-update-status-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePollBoardCtrlUpdateStatus 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PowerOn

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Power on server for configuration of service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePowerOn 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PreSanitize

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:PrepareForBoot

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Prepare server for booting host OS(FSM-STAGE:sam:dme:ComputePhysicalAssociate:PrepareForBoot)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: prepare-for-boot-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociatePrepareForBoot 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:Sanitize

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration(FSM-STAGE:sam:dme:ComputePhysicalAssociate:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SetupVmediaLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSetupVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SetupVmediaPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSetupVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:StorageCtlrImgUpdate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update storage controller image(FSM-STAGE:sam:dme:ComputePhysicalAssociate:StorageCtlrImgUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: storage-ctlr-img-update-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateStorageCtlrImgUpdate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwConfigHostOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure primary fabric interconnect for server host os (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-hostoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwConfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwConfigHostOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure secondary fabric interconnect for server host OS (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-hostospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwConfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwConfigPnuOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure primary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwConfigPnuOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Configure secondary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwConfigPortNivLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: configuring primary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-local-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwConfigPortNivLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwConfigPortNivPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: configuring secondary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwConfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-peer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwConfigPortNivPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwUnconfigPnuOSLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure primary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuoslocal-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:SwUnconfigPnuOSPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure secondary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalAssociate:SwUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuospeer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateSwUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:TeardownVmediaLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the Virtual Media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateTeardownVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:TeardownVmediaPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the Virtual media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalAssociate:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateTeardownVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:UpdateBoardCtrlRequest

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Sending Board Controller update request to CIMC(FSM-STAGE:sam:dme:ComputePhysicalAssociate:UpdateBoardCtrlRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-board-ctrl-request-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateUpdateBoardCtrlRequest 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:activateAdaptorNwFwLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Activate adapter network firmware on(FSM-STAGE:sam:dme:ComputePhysicalAssociate:activateAdaptorNwFwLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-adaptor-nw-fw-local-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateActivateAdaptorNwFwLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:activateAdaptorNwFwPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Activate adapter network firmware on(FSM-STAGE:sam:dme:ComputePhysicalAssociate:activateAdaptorNwFwPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-adaptor-nw-fw-peer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateActivateAdaptorNwFwPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:activateIBMCFw

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Activate CIMC firmware of server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:activateIBMCFw)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activateibmcfw-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateActivateIBMCFw 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:hagHostOSConnect

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Connect to host agent on server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalAssociate:hagHostOSConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-hostosconnect-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHagHostOSConnect 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:hagPnuOSConnect

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Connect to pre-boot environment agent for association with [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalAssociate:hagPnuOSConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosconnect-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHagPnuOSConnect 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:hagPnuOSDisconnect

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Disconnect pre-boot environment agent(FSM-STAGE:sam:dme:ComputePhysicalAssociate:hagPnuOSDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosdisconnect-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateHagPnuOSDisconnect 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:resetIBMC

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Reset CIMC of server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:resetIBMC)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: resetibmc-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateResetIBMC 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:updateAdaptorNwFwLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update adapter network firmware(FSM-STAGE:sam:dme:ComputePhysicalAssociate:updateAdaptorNwFwLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-adaptor-nw-fw-local-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateUpdateAdaptorNwFwLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:updateAdaptorNwFwPeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update adapter network firmware(FSM-STAGE:sam:dme:ComputePhysicalAssociate:updateAdaptorNwFwPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-adaptor-nw-fw-peer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateUpdateAdaptorNwFwPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:updateIBMCFw

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Update CIMC firmware of server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:updateIBMCFw)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: updateibmcfw-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateUpdateIBMCFw 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:waitForAdaptorNwFwUpdateLocal

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Wait for adapter network firmware update completion(FSM-STAGE:sam:dme:ComputePhysicalAssociate:waitForAdaptorNwFwUpdateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-adaptor-nw-fw-update-local-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateWaitForAdaptorNwFwUpdateLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:waitForAdaptorNwFwUpdatePeer

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Wait for adapter network firmware update completion(FSM-STAGE:sam:dme:ComputePhysicalAssociate:waitForAdaptorNwFwUpdatePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-adaptor-nw-fw-update-peer-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateWaitForAdaptorNwFwUpdatePeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalAssociate:waitForIBMCFwUpdate

Fault Code:F16973

Message

[FSM:STAGE:FAILED|RETRY]: Wait for CIMC firmware completion on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalAssociate:waitForIBMCFwUpdate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-foribmcfw-update-failed 

mibFaultCode: 16973 

mibFaultName: fsmStFailComputePhysicalAssociateWaitForIBMCFwUpdate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:BiosPostCompletion

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for BIOS POST completion from CIMC on server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryBiosPostCompletion 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:Cleanup

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Completing BIOS recovery mode for server [dn], and shutting it down(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Cleanup)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryCleanup 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:PreSanitize

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:Reset

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Resetting server [dn] power state after BIOS recovery(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryReset 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:Sanitize

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoverySanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:SetupVmediaLocal

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Provisioning a V-Media device with a bootable BIOS image for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoverySetupVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:SetupVmediaPeer

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Provisioning a V-Media device with a bootable BIOS image for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoverySetupVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:Shutdown

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Shutting down server [dn] to prepare for BIOS recovery(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Shutdown)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: shutdown-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryShutdown 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:Start

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Running BIOS recovery on server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Start)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryStart 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:StopVMediaLocal

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:StopVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-local-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryStopVMediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:StopVMediaPeer

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:StopVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-peer-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryStopVMediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:TeardownVmediaLocal

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryTeardownVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:TeardownVmediaPeer

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryTeardownVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalBiosRecovery:Wait

Fault Code:F16984

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for completion of BIOS recovery for server [dn] (up to 10 min)(FSM-STAGE:sam:dme:ComputePhysicalBiosRecovery:Wait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-failed 

mibFaultCode: 16984 

mibFaultName: fsmStFailComputePhysicalBiosRecoveryWait 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalCmosReset:BladePowerOn

Fault Code:F16986

Message

[FSM:STAGE:FAILED|RETRY]: Power on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:BladePowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: blade-power-on-failed 

mibFaultCode: 16986 

mibFaultName: fsmStFailComputePhysicalCmosResetBladePowerOn 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalCmosReset:Execute

Fault Code:F16986

Message

[FSM:STAGE:FAILED|RETRY]: Resetting CMOS for server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16986 

mibFaultName: fsmStFailComputePhysicalCmosResetExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalCmosReset:PreSanitize

Fault Code:F16986

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16986 

mibFaultName: fsmStFailComputePhysicalCmosResetPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalCmosReset:ReconfigBios

Fault Code:F16986

Message

[FSM:STAGE:FAILED|RETRY]: Reconfiguring BIOS Settings and Boot Order of server [serverId] for service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:ReconfigBios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reconfig-bios-failed 

mibFaultCode: 16986 

mibFaultName: fsmStFailComputePhysicalCmosResetReconfigBios 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalCmosReset:ReconfigUuid

Fault Code:F16986

Message

[FSM:STAGE:FAILED|RETRY]: Reconfiguring logical UUID of server [serverId] for service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:ReconfigUuid)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reconfig-uuid-failed 

mibFaultCode: 16986 

mibFaultName: fsmStFailComputePhysicalCmosResetReconfigUuid 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalCmosReset:Sanitize

Fault Code:F16986

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [serverId](FSM-STAGE:sam:dme:ComputePhysicalCmosReset:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16986 

mibFaultName: fsmStFailComputePhysicalCmosResetSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalConfigSoL:Execute

Fault Code:F17083

Message

[FSM:STAGE:FAILED|RETRY]: configuring SoL interface on server [dn](FSM-STAGE:sam:dme:ComputePhysicalConfigSoL:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 17083 

mibFaultName: fsmStFailComputePhysicalConfigSoLExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDecommission:Execute

Fault Code:F16976

Message

[FSM:STAGE:FAILED|RETRY]: Decommissioning server [dn](FSM-STAGE:sam:dme:ComputePhysicalDecommission:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16976 

mibFaultName: fsmStFailComputePhysicalDecommissionExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDecommission:StopVMediaLocal

Fault Code:F16976

Message

[FSM:STAGE:FAILED|RETRY]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalDecommission:StopVMediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-local-failed 

mibFaultCode: 16976 

mibFaultName: fsmStFailComputePhysicalDecommissionStopVMediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDecommission:StopVMediaPeer

Fault Code:F16976

Message

[FSM:STAGE:FAILED|RETRY]: Unprovisioning the V-Media bootable device for server [dn](FSM-STAGE:sam:dme:ComputePhysicalDecommission:StopVMediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: stopvmedia-peer-failed 

mibFaultCode: 16976 

mibFaultName: fsmStFailComputePhysicalDecommissionStopVMediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDiagnosticInterrupt:Execute

Fault Code:F17116

Message

[FSM:STAGE:FAILED|RETRY]: Execute Diagnostic Interrupt(NMI) for server [dn](FSM-STAGE:sam:dme:ComputePhysicalDiagnosticInterrupt:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 17116 

mibFaultName: fsmStFailComputePhysicalDiagnosticInterruptExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BiosPostCompletion

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for BIOS POST completion from CIMC on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBiosPostCompletion 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BmcConfigPnuOS

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a bootable device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBmcConfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BmcPreconfigPnuOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcPreconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBmcPreconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BmcPreconfigPnuOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcPreconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBmcPreconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BmcUnconfigPnuOS

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BmcUnconfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-unconfig-pnuos-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBmcUnconfigPnuOS 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BootPnuos

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Bring-up pre-boot environment on server for disassociation with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-pnuos-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBootPnuos 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:BootWait

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for system reset on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:BootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-wait-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateBootWait 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:ConfigBios

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Configuring BIOS Defaults on server [serverId](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:ConfigBios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-bios-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateConfigBios 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:ConfigUserAccess

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Configuring external user access(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateConfigUserAccess 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:HandlePooling

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Apply post-disassociation policies to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:HandlePooling)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: handle-pooling-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateHandlePooling 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:NicConfigPnuOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateNicConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:NicConfigPnuOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Configure adapter for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-config-pnuospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateNicConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:NicUnconfigHostOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure host OS connectivity from server adapter(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-hostoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateNicUnconfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:NicUnconfigHostOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure host OS connectivity from server adapter(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-hostospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateNicUnconfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:NicUnconfigPnuOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateNicUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:NicUnconfigPnuOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure adapter of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:NicUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-unconfig-pnuospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateNicUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PnuOSIdent

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Identify pre-boot environment agent on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePnuOSIdent 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PnuOSPolicy

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Populate pre-boot environment behavior policy to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePnuOSPolicy 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PnuOSScrub

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Scrub server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSScrub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosscrub-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePnuOSScrub 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PnuOSSelfTest

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Trigger self-test of server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePnuOSSelfTest 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PnuOSUnconfig

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure server from service profile [assignedToDn] pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSUnconfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosunconfig-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePnuOSUnconfig 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PnuOSValidate

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Pre-boot environment validate server for disassociation with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PnuOSValidate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosvalidate-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePnuOSValidate 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PowerOn

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Power on server for unconfiguration of service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePowerOn 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:PreSanitize

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociatePreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:Sanitize

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SetupVmediaLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SetupVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-local-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSetupVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SetupVmediaPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a Virtual Media device with a bootable pre-boot image for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SetupVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: setup-vmedia-peer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSetupVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:Shutdown

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Shutdown server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:Shutdown)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: shutdown-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateShutdown 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwConfigPnuOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Configure primary fabric interconnect for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwConfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwConfigPnuOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Configure secondary fabric interconnect for pre-boot environment on server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwConfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwConfigPortNivLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: configuring primary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-local-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwConfigPortNivLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwConfigPortNivPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: configuring secondary fabric interconnect access to server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwConfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-peer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwConfigPortNivPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwUnconfigHostOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure host OS connectivity from server to primary fabric interconnect(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigHostOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-hostoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwUnconfigHostOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwUnconfigHostOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure host OS connectivity from server to secondary fabric interconnect(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigHostOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-hostospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwUnconfigHostOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwUnconfigPnuOSLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure primary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuoslocal-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwUnconfigPnuOSLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:SwUnconfigPnuOSPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfigure secondary fabric interconnect for server pre-boot environment(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:SwUnconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-pnuospeer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateSwUnconfigPnuOSPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:TeardownVmediaLocal

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the Virtual Media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:TeardownVmediaLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-local-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateTeardownVmediaLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:TeardownVmediaPeer

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the Virtual media bootable device for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:TeardownVmediaPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: teardown-vmedia-peer-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateTeardownVmediaPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:UnconfigBios

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Unconfiguring BIOS Settings and Boot Order of server [serverId] (service profile [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:UnconfigBios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-bios-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateUnconfigBios 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:UnconfigSoL

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Removing SoL configuration from server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:UnconfigSoL)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-so-lfailed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateUnconfigSoL 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:UnconfigUuid

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Restore original UUID for server (service profile: [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:UnconfigUuid)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unconfig-uuid-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateUnconfigUuid 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:hagPnuOSConnect

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Connect to pre-boot environment agent on server for disassociation with service profile [assignedToDn](FSM-STAGE:sam:dme:ComputePhysicalDisassociate:hagPnuOSConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosconnect-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateHagPnuOSConnect 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalDisassociate:hagPnuOSDisconnect

Fault Code:F16974

Message

[FSM:STAGE:FAILED|RETRY]: Disconnect pre-boot environment agent for server(FSM-STAGE:sam:dme:ComputePhysicalDisassociate:hagPnuOSDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-pnuosdisconnect-failed 

mibFaultCode: 16974 

mibFaultName: fsmStFailComputePhysicalDisassociateHagPnuOSDisconnect 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalHardShutdown:Execute

Fault Code:F16978

Message

[FSM:STAGE:FAILED|RETRY]: Hard shutdown of server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardShutdown:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16978 

mibFaultName: fsmStFailComputePhysicalHardShutdownExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalHardreset:Execute

Fault Code:F16981

Message

[FSM:STAGE:FAILED|RETRY]: Hard-reset server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardreset:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16981 

mibFaultName: fsmStFailComputePhysicalHardresetExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalHardreset:PreSanitize

Fault Code:F16981

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardreset:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16981 

mibFaultName: fsmStFailComputePhysicalHardresetPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalHardreset:Sanitize

Fault Code:F16981

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalHardreset:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16981 

mibFaultName: fsmStFailComputePhysicalHardresetSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalPowerCap:Config

Fault Code:F16975

Message

[FSM:STAGE:FAILED|RETRY]: Configuring power cap of server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowerCap:Config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 16975 

mibFaultName: fsmStFailComputePhysicalPowerCapConfig 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalPowercycle:Execute

Fault Code:F16980

Message

[FSM:STAGE:FAILED|RETRY]: Power-cycle server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowercycle:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16980 

mibFaultName: fsmStFailComputePhysicalPowercycleExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalPowercycle:PreSanitize

Fault Code:F16980

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowercycle:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16980 

mibFaultName: fsmStFailComputePhysicalPowercyclePreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalPowercycle:Sanitize

Fault Code:F16980

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalPowercycle:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16980 

mibFaultName: fsmStFailComputePhysicalPowercycleSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalResetBmc:Execute

Fault Code:F16987

Message

[FSM:STAGE:FAILED|RETRY]: Resetting Management Controller on server [dn](FSM-STAGE:sam:dme:ComputePhysicalResetBmc:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16987 

mibFaultName: fsmStFailComputePhysicalResetBmcExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalResetKvm:Execute

Fault Code:F17163

Message

[FSM:STAGE:FAILED|RETRY]: Execute KVM Reset for server [dn](FSM-STAGE:sam:dme:ComputePhysicalResetKvm:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 17163 

mibFaultName: fsmStFailComputePhysicalResetKvmExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalSoftShutdown:Execute

Fault Code:F16977

Message

[FSM:STAGE:FAILED|RETRY]: Soft shutdown of server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftShutdown:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16977 

mibFaultName: fsmStFailComputePhysicalSoftShutdownExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalSoftreset:Execute

Fault Code:F16982

Message

[FSM:STAGE:FAILED|RETRY]: Soft-reset server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftreset:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16982 

mibFaultName: fsmStFailComputePhysicalSoftresetExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalSoftreset:PreSanitize

Fault Code:F16982

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftreset:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16982 

mibFaultName: fsmStFailComputePhysicalSoftresetPreSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalSoftreset:Sanitize

Fault Code:F16982

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [dn](FSM-STAGE:sam:dme:ComputePhysicalSoftreset:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16982 

mibFaultName: fsmStFailComputePhysicalSoftresetSanitize 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalSwConnUpd:A

Fault Code:F16983

Message

[FSM:STAGE:FAILED|RETRY]: Updating fabric A for server [dn](FSM-STAGE:sam:dme:ComputePhysicalSwConnUpd:A)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: a-failed 

mibFaultCode: 16983 

mibFaultName: fsmStFailComputePhysicalSwConnUpdA 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalSwConnUpd:B

Fault Code:F16983

Message

[FSM:STAGE:FAILED|RETRY]: Updating fabric B for server [dn](FSM-STAGE:sam:dme:ComputePhysicalSwConnUpd:B)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: b-failed 

mibFaultCode: 16983 

mibFaultName: fsmStFailComputePhysicalSwConnUpdB 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalTurnup:Execute

Fault Code:F16979

Message

[FSM:STAGE:FAILED|RETRY]: Power-on server [dn](FSM-STAGE:sam:dme:ComputePhysicalTurnup:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16979 

mibFaultName: fsmStFailComputePhysicalTurnupExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUnconfigSoL:Execute

Fault Code:F17084

Message

[FSM:STAGE:FAILED|RETRY]: removing SoL interface configuration from server [dn](FSM-STAGE:sam:dme:ComputePhysicalUnconfigSoL:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 17084 

mibFaultName: fsmStFailComputePhysicalUnconfigSoLExecute 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateAdaptor:PollUpdateStatusLocal

Fault Code:F17043

Message

[FSM:STAGE:FAILED|RETRY]: waiting for update to complete(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PollUpdateStatusLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-local-failed 

mibFaultCode: 17043 

mibFaultName: fsmStFailComputePhysicalUpdateAdaptorPollUpdateStatusLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateAdaptor:PollUpdateStatusPeer

Fault Code:F17043

Message

[FSM:STAGE:FAILED|RETRY]: waiting for update to complete(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PollUpdateStatusPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-peer-failed 

mibFaultCode: 17043 

mibFaultName: fsmStFailComputePhysicalUpdateAdaptorPollUpdateStatusPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateAdaptor:PowerOff

Fault Code:F17043

Message

[FSM:STAGE:FAILED|RETRY]: Power off the server(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PowerOff)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-off-failed 

mibFaultCode: 17043 

mibFaultName: fsmStFailComputePhysicalUpdateAdaptorPowerOff 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateAdaptor:PowerOn

Fault Code:F17043

Message

[FSM:STAGE:FAILED|RETRY]: power on the blade(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:PowerOn)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: power-on-failed 

mibFaultCode: 17043 

mibFaultName: fsmStFailComputePhysicalUpdateAdaptorPowerOn 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateAdaptor:UpdateRequestLocal

Fault Code:F17043

Message

[FSM:STAGE:FAILED|RETRY]: sending update request to Adaptor(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:UpdateRequestLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-local-failed 

mibFaultCode: 17043 

mibFaultName: fsmStFailComputePhysicalUpdateAdaptorUpdateRequestLocal 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateAdaptor:UpdateRequestPeer

Fault Code:F17043

Message

[FSM:STAGE:FAILED|RETRY]: sending update request to Adaptor(FSM-STAGE:sam:dme:ComputePhysicalUpdateAdaptor:UpdateRequestPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-peer-failed 

mibFaultCode: 17043 

mibFaultName: fsmStFailComputePhysicalUpdateAdaptorUpdateRequestPeer 

moClass: compute:Physical 

Type: fsm

fsmStFailComputePhysicalUpdateExtUsers:Deploy

Fault Code:F17008

Message

[FSM:STAGE:FAILED|RETRY]: external mgmt user deployment on server [dn] (profile [assignedToDn])(FSM-STAGE:sam:dme:ComputePhysicalUpdateExtUsers:Deploy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: deploy-failed 

mibFaultCode: 17008 

mibFaultName: fsmStFailComputePhysicalUpdateExtUsersDeploy 

moClass: compute:Physical 

Type: fsm

fsmStFailComputeRackUnitDiscover:BiosPostCompletion

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for BIOS POST completion from CIMC on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BiosPostCompletion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bios-post-completion-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBiosPostCompletion 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcConfigPnuOS

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: provisioning a bootable device with a bootable pre-boot image for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcConfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-config-pnuos-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcConfigPnuOS 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcConfigureConnLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Configuring connectivity on CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcConfigureConnLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcConfigureConnPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Configuring connectivity on CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcConfigureConnPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcInventory

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: getting inventory of server [id] via CIMC(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-inventory-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcInventory 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcPreconfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcPreconfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcPreconfigPnuOSLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcPreconfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: prepare configuration for preboot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcPreconfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-preconfig-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcPreconfigPnuOSPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcPresence

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: checking CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcPresence)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-presence-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcPresence 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcShutdownDiscovered

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Shutdown the server [id]; deep discovery completed(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcShutdownDiscovered)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-shutdown-discovered-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcShutdownDiscovered 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BmcUnconfigPnuOS

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: unprovisioning the bootable device for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BmcUnconfigPnuOS)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-unconfig-pnuos-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBmcUnconfigPnuOS 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BootPnuos

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: power server [id] on with pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BootPnuos)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-pnuos-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBootPnuos 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:BootWait

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for system reset on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:BootWait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: boot-wait-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverBootWait 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:ConfigDiscoveryMode

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: setting adapter mode to discovery for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ConfigDiscoveryMode)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-discovery-mode-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverConfigDiscoveryMode 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:ConfigNivMode

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: setting adapter mode to NIV for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ConfigNivMode)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-niv-mode-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverConfigNivMode 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:ConfigUserAccess

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configuring external user access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ConfigUserAccess)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-user-access-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverConfigUserAccess 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:HandlePooling

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Invoke post-discovery policies on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:HandlePooling)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: handle-pooling-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverHandlePooling 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:NicInventoryLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: detect and get mezz cards information from [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:NicInventoryLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverNicInventoryLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:NicInventoryPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: detect and get mezz cards information from [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:NicInventoryPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: nic-inventory-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverNicInventoryPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSConnStatus

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Explore connectivity of server [id] in pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSConnStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosconn-status-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSConnStatus 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSConnectivity

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Explore connectivity of server [id] in pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosconnectivity-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSConnectivity 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSIdent

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Identify pre-boot environment agent on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSIdent)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosident-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSIdent 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSInventory

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Perform inventory of server [id] pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSInventory)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosinventory-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSInventory 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSPolicy

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Populate pre-boot environment behavior policy to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSPolicy)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuospolicy-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSPolicy 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSScrub

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Scrub server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSScrub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosscrub-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSScrub 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PnuOSSelfTest

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Trigger self-test of server [id] pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PnuOSSelfTest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pnuosself-test-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPnuOSSelfTest 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:PreSanitize

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Preparing to check hardware configuration server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:PreSanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: pre-sanitize-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverPreSanitize 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:ReadSmbios

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for SMBIOS table from CIMC on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:ReadSmbios)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: read-smbios-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverReadSmbios 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:Sanitize

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Checking hardware configuration server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:Sanitize)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sanitize-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSanitize 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwConfigPnuOSLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configure primary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPnuOSLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuoslocal-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwConfigPnuOSLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwConfigPnuOSPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configure secondary fabric interconnect for pre-boot environment(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPnuOSPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-pnuospeer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwConfigPnuOSPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwConfigPortNivLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configuring primary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwConfigPortNivLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwConfigPortNivPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: configuring secondary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-port-niv-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwConfigPortNivPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwConfigureConnLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Configuring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwConfigureConnLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwConfigureConnPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Configuring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwConfigureConnPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwPnuOSConnectivityLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: determine connectivity of server [id] to fabric(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwPnuOSConnectivityLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-pnuosconnectivity-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwPnuOSConnectivityLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwPnuOSConnectivityPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: determine connectivity of server [id] to fabric(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwPnuOSConnectivityPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-pnuosconnectivity-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwPnuOSConnectivityPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwUnconfigPortNivLocal

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Unconfiguring primary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwUnconfigPortNivLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-port-niv-local-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwUnconfigPortNivLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:SwUnconfigPortNivPeer

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Unconfiguring secondary fabric interconnect access to server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:SwUnconfigPortNivPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfig-port-niv-peer-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverSwUnconfigPortNivPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:hagConnect

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Connect to pre-boot environment agent on server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:hagConnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-connect-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverHagConnect 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:hagDisconnect

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: Disconnect pre-boot environment agent for server [id](FSM-STAGE:sam:dme:ComputeRackUnitDiscover:hagDisconnect)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: hag-disconnect-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverHagDisconnect 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitDiscover:waitForConnReady

Fault Code:F16520

Message

[FSM:STAGE:FAILED|RETRY]: wait for connection to be established(FSM-STAGE:sam:dme:ComputeRackUnitDiscover:waitForConnReady)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-conn-ready-failed 

mibFaultCode: 16520 

mibFaultName: fsmStFailComputeRackUnitDiscoverWaitForConnReady 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitOffline:CleanupLocal

Fault Code:F17170

Message

[FSM:STAGE:FAILED|RETRY]: cleaning host entries on local fabric-interconnect(FSM-STAGE:sam:dme:ComputeRackUnitOffline:CleanupLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-local-failed 

mibFaultCode: 17170 

mibFaultName: fsmStFailComputeRackUnitOfflineCleanupLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitOffline:CleanupPeer

Fault Code:F17170

Message

[FSM:STAGE:FAILED|RETRY]: cleaning host entries on peer fabric-interconnect(FSM-STAGE:sam:dme:ComputeRackUnitOffline:CleanupPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-peer-failed 

mibFaultCode: 17170 

mibFaultName: fsmStFailComputeRackUnitOfflineCleanupPeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitOffline:SwUnconfigureLocal

Fault Code:F17170

Message

[FSM:STAGE:FAILED|RETRY]: Unconfiguring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitOffline:SwUnconfigureLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfigure-local-failed 

mibFaultCode: 17170 

mibFaultName: fsmStFailComputeRackUnitOfflineSwUnconfigureLocal 

moClass: compute:RackUnit 

Type: fsm

fsmStFailComputeRackUnitOffline:SwUnconfigurePeer

Fault Code:F17170

Message

[FSM:STAGE:FAILED|RETRY]: Unconfiguring fabric-interconnect connectivity to CIMC of server [id](FSM-STAGE:sam:dme:ComputeRackUnitOffline:SwUnconfigurePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-unconfigure-peer-failed 

mibFaultCode: 17170 

mibFaultName: fsmStFailComputeRackUnitOfflineSwUnconfigurePeer 

moClass: compute:RackUnit 

Type: fsm

fsmStFailEpqosDefinitionDelTaskRemove:Local

Fault Code:F16750

Message

[FSM:STAGE:FAILED|RETRY]: vnic qos policy [name] removal from primary(FSM-STAGE:sam:dme:EpqosDefinitionDelTaskRemove:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16750 

mibFaultName: fsmStFailEpqosDefinitionDelTaskRemoveLocal 

moClass: epqos:DefinitionDelTask 

Type: fsm

fsmStFailEpqosDefinitionDelTaskRemove:Peer

Fault Code:F16750

Message

[FSM:STAGE:FAILED|RETRY]: vnic qos policy [name] removal from secondary(FSM-STAGE:sam:dme:EpqosDefinitionDelTaskRemove:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16750 

mibFaultName: fsmStFailEpqosDefinitionDelTaskRemovePeer 

moClass: epqos:DefinitionDelTask 

Type: fsm

fsmStFailEpqosDefinitionDeploy:Local

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: vnic qos policy [name] configuration to primary(FSM-STAGE:sam:dme:EpqosDefinitionDeploy:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailEpqosDefinitionDeployLocal 

moClass: epqos:Definition 

Type: fsm

fsmStFailEpqosDefinitionDeploy:Peer

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: vnic qos policy [name] configuration to secondary(FSM-STAGE:sam:dme:EpqosDefinitionDeploy:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailEpqosDefinitionDeployPeer 

moClass: epqos:Definition 

Type: fsm

fsmStFailEquipmentChassisDynamicReallocation:Config

Fault Code:F17134

Message

[FSM:STAGE:FAILED|RETRY]: (FSM-STAGE:sam:dme:EquipmentChassisDynamicReallocation:Config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 17134 

mibFaultName: fsmStFailEquipmentChassisDynamicReallocationConfig 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisPowerCap:Config

Fault Code:F16975

Message

[FSM:STAGE:FAILED|RETRY]: (FSM-STAGE:sam:dme:EquipmentChassisPowerCap:Config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 16975 

mibFaultName: fsmStFailEquipmentChassisPowerCapConfig 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisPsuPolicyConfig:Execute

Fault Code:F16533

Message

[FSM:STAGE:FAILED|RETRY]: Deploying Power Management policy changes on chassis [id](FSM-STAGE:sam:dme:EquipmentChassisPsuPolicyConfig:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16533 

mibFaultName: fsmStFailEquipmentChassisPsuPolicyConfigExecute 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisRemoveChassis:DisableEndPoint

Fault Code:F16407

Message

[FSM:STAGE:FAILED|RETRY]: unconfiguring access to chassis [id](FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:DisableEndPoint)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: disable-end-point-failed 

mibFaultCode: 16407 

mibFaultName: fsmStFailEquipmentChassisRemoveChassisDisableEndPoint 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisRemoveChassis:UnIdentifyLocal

Fault Code:F16407

Message

[FSM:STAGE:FAILED|RETRY]: erasing chassis identity [id] from primary(FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:UnIdentifyLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: un-identify-local-failed 

mibFaultCode: 16407 

mibFaultName: fsmStFailEquipmentChassisRemoveChassisUnIdentifyLocal 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisRemoveChassis:UnIdentifyPeer

Fault Code:F16407

Message

[FSM:STAGE:FAILED|RETRY]: erasing chassis identity [id] from secondary(FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:UnIdentifyPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: un-identify-peer-failed 

mibFaultCode: 16407 

mibFaultName: fsmStFailEquipmentChassisRemoveChassisUnIdentifyPeer 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisRemoveChassis:Wait

Fault Code:F16407

Message

[FSM:STAGE:FAILED|RETRY]: waiting for clean up of resources for chassis [id] (approx. 2 min)(FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:Wait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-failed 

mibFaultCode: 16407 

mibFaultName: fsmStFailEquipmentChassisRemoveChassisWait 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentChassisRemoveChassis:decomission

Fault Code:F16407

Message

[FSM:STAGE:FAILED|RETRY]: decomissioning chassis [id](FSM-STAGE:sam:dme:EquipmentChassisRemoveChassis:decomission)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: decomission-failed 

mibFaultCode: 16407 

mibFaultName: fsmStFailEquipmentChassisRemoveChassisDecomission 

moClass: equipment:Chassis 

Type: fsm

fsmStFailEquipmentFexRemoveFex:CleanupEntries

Fault Code:F16942

Message

[FSM:STAGE:FAILED|RETRY]: cleaning host entries(FSM-STAGE:sam:dme:EquipmentFexRemoveFex:CleanupEntries)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-entries-failed 

mibFaultCode: 16942 

mibFaultName: fsmStFailEquipmentFexRemoveFexCleanupEntries 

moClass: equipment:Fex 

Type: fsm

fsmStFailEquipmentFexRemoveFex:UnIdentifyLocal

Fault Code:F16942

Message

[FSM:STAGE:FAILED|RETRY]: erasing fex identity [id] from primary(FSM-STAGE:sam:dme:EquipmentFexRemoveFex:UnIdentifyLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: un-identify-local-failed 

mibFaultCode: 16942 

mibFaultName: fsmStFailEquipmentFexRemoveFexUnIdentifyLocal 

moClass: equipment:Fex 

Type: fsm

fsmStFailEquipmentFexRemoveFex:Wait

Fault Code:F16942

Message

[FSM:STAGE:FAILED|RETRY]: waiting for clean up of resources for chassis [id] (approx. 2 min)(FSM-STAGE:sam:dme:EquipmentFexRemoveFex:Wait)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-failed 

mibFaultCode: 16942 

mibFaultName: fsmStFailEquipmentFexRemoveFexWait 

moClass: equipment:Fex 

Type: fsm

fsmStFailEquipmentFexRemoveFex:decomission

Fault Code:F16942

Message

[FSM:STAGE:FAILED|RETRY]: decomissioning fex [id](FSM-STAGE:sam:dme:EquipmentFexRemoveFex:decomission)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: decomission-failed 

mibFaultCode: 16942 

mibFaultName: fsmStFailEquipmentFexRemoveFexDecomission 

moClass: equipment:Fex 

Type: fsm

fsmStFailEquipmentIOCardFeConn:ConfigureEndPoint

Fault Code:F16406

Message

[FSM:STAGE:FAILED|RETRY]: configuring management identity to IOM [chassisId]/[id]([side])(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:ConfigureEndPoint)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: configure-end-point-failed 

mibFaultCode: 16406 

mibFaultName: fsmStFailEquipmentIOCardFeConnConfigureEndPoint 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardFeConn:ConfigureSwMgmtEndPoint

Fault Code:F16406

Message

[FSM:STAGE:FAILED|RETRY]: configuring fabric interconnect [switchId] mgmt connectivity to IOM [chassisId]/[id]([side])(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:ConfigureSwMgmtEndPoint)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: configure-sw-mgmt-end-point-failed 

mibFaultCode: 16406 

mibFaultName: fsmStFailEquipmentIOCardFeConnConfigureSwMgmtEndPoint 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardFeConn:ConfigureVifNs

Fault Code:F16406

Message

[FSM:STAGE:FAILED|RETRY]: configuring IOM [chassisId]/[id]([side]) virtual name space(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:ConfigureVifNs)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: configure-vif-ns-failed 

mibFaultCode: 16406 

mibFaultName: fsmStFailEquipmentIOCardFeConnConfigureVifNs 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardFeConn:DiscoverChassis

Fault Code:F16406

Message

[FSM:STAGE:FAILED|RETRY]: triggerring chassis discovery via IOM [chassisId]/[id]([side])(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:DiscoverChassis)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: discover-chassis-failed 

mibFaultCode: 16406 

mibFaultName: fsmStFailEquipmentIOCardFeConnDiscoverChassis 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardFeConn:EnableChassis

Fault Code:F16406

Message

[FSM:STAGE:FAILED|RETRY]: enabling chassis [chassisId] on [side] side(FSM-STAGE:sam:dme:EquipmentIOCardFeConn:EnableChassis)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: enable-chassis-failed 

mibFaultCode: 16406 

mibFaultName: fsmStFailEquipmentIOCardFeConnEnableChassis 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardFePresence:CheckLicense

Fault Code:F16405

Message

[FSM:STAGE:FAILED|RETRY]: Checking license for chassis [chassisId] (iom [id])(FSM-STAGE:sam:dme:EquipmentIOCardFePresence:CheckLicense)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: check-license-failed 

mibFaultCode: 16405 

mibFaultName: fsmStFailEquipmentIOCardFePresenceCheckLicense 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardFePresence:Identify

Fault Code:F16405

Message

[FSM:STAGE:FAILED|RETRY]: identifying IOM [chassisId]/[id](FSM-STAGE:sam:dme:EquipmentIOCardFePresence:Identify)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: identify-failed 

mibFaultCode: 16405 

mibFaultName: fsmStFailEquipmentIOCardFePresenceIdentify 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardMuxOffline:CleanupEntries

Fault Code:F16945

Message

[FSM:STAGE:FAILED|RETRY]: cleaning host entries(FSM-STAGE:sam:dme:EquipmentIOCardMuxOffline:CleanupEntries)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: cleanup-entries-failed 

mibFaultCode: 16945 

mibFaultName: fsmStFailEquipmentIOCardMuxOfflineCleanupEntries 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardResetCmc:Execute

Fault Code:F16803

Message

[FSM:STAGE:FAILED|RETRY]: Resetting Chassis Management Controller on IOM [chassisId]/[id](FSM-STAGE:sam:dme:EquipmentIOCardResetCmc:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16803 

mibFaultName: fsmStFailEquipmentIOCardResetCmcExecute 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentIOCardResetIom:Execute

Fault Code:F16988

Message

[FSM:STAGE:FAILED|RETRY]: Reset IOM [id] on Fex [chassisId](FSM-STAGE:sam:dme:EquipmentIOCardResetIom:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16988 

mibFaultName: fsmStFailEquipmentIOCardResetIomExecute 

moClass: equipment:IOCard 

Type: fsm

fsmStFailEquipmentLocatorLedSetFeLocatorLed:Execute

Fault Code:F16943

Message

[FSM:STAGE:FAILED|RETRY]: setting locator led to [adminState](FSM-STAGE:sam:dme:EquipmentLocatorLedSetFeLocatorLed:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16943 

mibFaultName: fsmStFailEquipmentLocatorLedSetFeLocatorLedExecute 

moClass: equipment:LocatorLed 

Type: fsm

fsmStFailEquipmentLocatorLedSetLocatorLed:Execute

Fault Code:F16408

Message

[FSM:STAGE:FAILED|RETRY]: setting locator led to [adminState](FSM-STAGE:sam:dme:EquipmentLocatorLedSetLocatorLed:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16408 

mibFaultName: fsmStFailEquipmentLocatorLedSetLocatorLedExecute 

moClass: equipment:LocatorLed 

Type: fsm

fsmStFailExtvmmKeyStoreCertInstall:SetLocal

Fault Code:F16880

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager cetificate configuration on local fabric(FSM-STAGE:sam:dme:ExtvmmKeyStoreCertInstall:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 16880 

mibFaultName: fsmStFailExtvmmKeyStoreCertInstallSetLocal 

moClass: extvmm:KeyStore 

Type: fsm

fsmStFailExtvmmKeyStoreCertInstall:SetPeer

Fault Code:F16880

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager certificate configuration on peer fabric(FSM-STAGE:sam:dme:ExtvmmKeyStoreCertInstall:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 16880 

mibFaultName: fsmStFailExtvmmKeyStoreCertInstallSetPeer 

moClass: extvmm:KeyStore 

Type: fsm

fsmStFailExtvmmMasterExtKeyConfig:SetLocal

Fault Code:F16879

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager extension-key configuration on peer fabric(FSM-STAGE:sam:dme:ExtvmmMasterExtKeyConfig:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 16879 

mibFaultName: fsmStFailExtvmmMasterExtKeyConfigSetLocal 

moClass: extvmm:MasterExtKey 

Type: fsm

fsmStFailExtvmmMasterExtKeyConfig:SetPeer

Fault Code:F16879

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager extension-key configuration on local fabric(FSM-STAGE:sam:dme:ExtvmmMasterExtKeyConfig:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 16879 

mibFaultName: fsmStFailExtvmmMasterExtKeyConfigSetPeer 

moClass: extvmm:MasterExtKey 

Type: fsm

fsmStFailExtvmmProviderConfig:GetVersion

Fault Code:F16879

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager version fetch(FSM-STAGE:sam:dme:ExtvmmProviderConfig:GetVersion)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: get-version-failed 

mibFaultCode: 16879 

mibFaultName: fsmStFailExtvmmProviderConfigGetVersion 

moClass: extvmm:Provider 

Type: fsm

fsmStFailExtvmmProviderConfig:SetLocal

Fault Code:F16879

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager configuration on local fabric(FSM-STAGE:sam:dme:ExtvmmProviderConfig:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 16879 

mibFaultName: fsmStFailExtvmmProviderConfigSetLocal 

moClass: extvmm:Provider 

Type: fsm

fsmStFailExtvmmProviderConfig:SetPeer

Fault Code:F16879

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager configuration on peer fabric(FSM-STAGE:sam:dme:ExtvmmProviderConfig:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 16879 

mibFaultName: fsmStFailExtvmmProviderConfigSetPeer 

moClass: extvmm:Provider 

Type: fsm

fsmStFailExtvmmSwitchDelTaskRemoveProvider:RemoveLocal

Fault Code:F16881

Message

[FSM:STAGE:FAILED|RETRY]: external VM manager deletion from local fabric(FSM-STAGE:sam:dme:ExtvmmSwitchDelTaskRemoveProvider:RemoveLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remove-local-failed 

mibFaultCode: 16881 

mibFaultName: fsmStFailExtvmmSwitchDelTaskRemoveProviderRemoveLocal 

moClass: extvmm:SwitchDelTask 

Type: fsm

fsmStFailFabricComputeSlotEpIdentify:ExecuteLocal

Fault Code:F16519

Message

[FSM:STAGE:FAILED|RETRY]: identifying a server in [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:FabricComputeSlotEpIdentify:ExecuteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-local-failed 

mibFaultCode: 16519 

mibFaultName: fsmStFailFabricComputeSlotEpIdentifyExecuteLocal 

moClass: fabric:ComputeSlotEp 

Type: fsm

fsmStFailFabricComputeSlotEpIdentify:ExecutePeer

Fault Code:F16519

Message

[FSM:STAGE:FAILED|RETRY]: identifying a server in [chassisId]/[slotId] via CIMC(FSM-STAGE:sam:dme:FabricComputeSlotEpIdentify:ExecutePeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-peer-failed 

mibFaultCode: 16519 

mibFaultName: fsmStFailFabricComputeSlotEpIdentifyExecutePeer 

moClass: fabric:ComputeSlotEp 

Type: fsm

fsmStFailFabricLanCloudSwitchMode:SwConfigLocal

Fault Code:F16539

Message

[FSM:STAGE:FAILED|RETRY]: (FSM-STAGE:sam:dme:FabricLanCloudSwitchMode:SwConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-local-failed 

mibFaultCode: 16539 

mibFaultName: fsmStFailFabricLanCloudSwitchModeSwConfigLocal 

moClass: fabric:LanCloud 

Type: fsm

fsmStFailFabricLanCloudSwitchMode:SwConfigPeer

Fault Code:F16539

Message

[FSM:STAGE:FAILED|RETRY]: Fabric interconnect mode configuration to primary(FSM-STAGE:sam:dme:FabricLanCloudSwitchMode:SwConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-peer-failed 

mibFaultCode: 16539 

mibFaultName: fsmStFailFabricLanCloudSwitchModeSwConfigPeer 

moClass: fabric:LanCloud 

Type: fsm

fsmStFailFabricSanCloudSwitchMode:SwConfigLocal

Fault Code:F16539

Message

[FSM:STAGE:FAILED|RETRY]: (FSM-STAGE:sam:dme:FabricSanCloudSwitchMode:SwConfigLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-local-failed 

mibFaultCode: 16539 

mibFaultName: fsmStFailFabricSanCloudSwitchModeSwConfigLocal 

moClass: fabric:SanCloud 

Type: fsm

fsmStFailFabricSanCloudSwitchMode:SwConfigPeer

Fault Code:F16539

Message

[FSM:STAGE:FAILED|RETRY]: Fabric interconnect FC mode configuration to primary(FSM-STAGE:sam:dme:FabricSanCloudSwitchMode:SwConfigPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-config-peer-failed 

mibFaultCode: 16539 

mibFaultName: fsmStFailFabricSanCloudSwitchModeSwConfigPeer 

moClass: fabric:SanCloud 

Type: fsm

fsmStFailFirmwareDistributableDelete:Local

Fault Code:F16651

Message

[FSM:STAGE:FAILED|RETRY]: deleting package [name] from primary(FSM-STAGE:sam:dme:FirmwareDistributableDelete:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16651 

mibFaultName: fsmStFailFirmwareDistributableDeleteLocal 

moClass: firmware:Distributable 

Type: fsm

fsmStFailFirmwareDistributableDelete:Remote

Fault Code:F16651

Message

[FSM:STAGE:FAILED|RETRY]: deleting package [name] from secondary(FSM-STAGE:sam:dme:FirmwareDistributableDelete:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 16651 

mibFaultName: fsmStFailFirmwareDistributableDeleteRemote 

moClass: firmware:Distributable 

Type: fsm

fsmStFailFirmwareDownloaderDownload:CopyRemote

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: sync images to subordinate(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailFirmwareDownloaderDownloadCopyRemote 

moClass: firmware:Downloader 

Type: fsm

fsmStFailFirmwareDownloaderDownload:DeleteLocal

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: deleting downloadable [fileName] on local(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:DeleteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-local-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailFirmwareDownloaderDownloadDeleteLocal 

moClass: firmware:Downloader 

Type: fsm

fsmStFailFirmwareDownloaderDownload:Local

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: downloading image [fileName] from [server](FSM-STAGE:sam:dme:FirmwareDownloaderDownload:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailFirmwareDownloaderDownloadLocal 

moClass: firmware:Downloader 

Type: fsm

fsmStFailFirmwareDownloaderDownload:UnpackLocal

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: unpacking image [fileName] on primary(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:UnpackLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: unpack-local-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailFirmwareDownloaderDownloadUnpackLocal 

moClass: firmware:Downloader 

Type: fsm

fsmStFailFirmwareImageDelete:Local

Fault Code:F16651

Message

[FSM:STAGE:FAILED|RETRY]: deleting image file [name] ([invTag]) from primary(FSM-STAGE:sam:dme:FirmwareImageDelete:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16651 

mibFaultName: fsmStFailFirmwareImageDeleteLocal 

moClass: firmware:Image 

Type: fsm

fsmStFailFirmwareImageDelete:Remote

Fault Code:F16651

Message

[FSM:STAGE:FAILED|RETRY]: deleting image file [name] ([invTag]) from secondary(FSM-STAGE:sam:dme:FirmwareImageDelete:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 16651 

mibFaultName: fsmStFailFirmwareImageDeleteRemote 

moClass: firmware:Image 

Type: fsm

fsmStFailLicenseDownloaderDownload:CopyRemote

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Copy the license file to subordinate for inventory(FSM-STAGE:sam:dme:LicenseDownloaderDownload:CopyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-remote-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailLicenseDownloaderDownloadCopyRemote 

moClass: license:Downloader 

Type: fsm

fsmStFailLicenseDownloaderDownload:DeleteLocal

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: deleting temporary files for [fileName] on local(FSM-STAGE:sam:dme:LicenseDownloaderDownload:DeleteLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-local-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailLicenseDownloaderDownloadDeleteLocal 

moClass: license:Downloader 

Type: fsm

fsmStFailLicenseDownloaderDownload:DeleteRemote

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: deleting temporary files for [fileName] on subordinate(FSM-STAGE:sam:dme:LicenseDownloaderDownload:DeleteRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-remote-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailLicenseDownloaderDownloadDeleteRemote 

moClass: license:Downloader 

Type: fsm

fsmStFailLicenseDownloaderDownload:Local

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: downloading license file [fileName] from [server](FSM-STAGE:sam:dme:LicenseDownloaderDownload:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailLicenseDownloaderDownloadLocal 

moClass: license:Downloader 

Type: fsm

fsmStFailLicenseDownloaderDownload:ValidateLocal

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: validation for license file [fileName] on primary(FSM-STAGE:sam:dme:LicenseDownloaderDownload:ValidateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: validate-local-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailLicenseDownloaderDownloadValidateLocal 

moClass: license:Downloader 

Type: fsm

fsmStFailLicenseDownloaderDownload:ValidateRemote

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: validation for license file [fileName] on subordinate(FSM-STAGE:sam:dme:LicenseDownloaderDownload:ValidateRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: validate-remote-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailLicenseDownloaderDownloadValidateRemote 

moClass: license:Downloader 

Type: fsm

fsmStFailLicenseFileClear:Local

Fault Code:F17052

Message

[FSM:STAGE:FAILED|RETRY]: Clearing license on primary(FSM-STAGE:sam:dme:LicenseFileClear:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 17052 

mibFaultName: fsmStFailLicenseFileClearLocal 

moClass: license:File 

Type: fsm

fsmStFailLicenseFileClear:Remote

Fault Code:F17052

Message

[FSM:STAGE:FAILED|RETRY]: Clearing license on subordinate(FSM-STAGE:sam:dme:LicenseFileClear:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 17052 

mibFaultName: fsmStFailLicenseFileClearRemote 

moClass: license:File 

Type: fsm

fsmStFailLicenseFileInstall:Local

Fault Code:F17051

Message

[FSM:STAGE:FAILED|RETRY]: Installing license on primary(FSM-STAGE:sam:dme:LicenseFileInstall:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 17051 

mibFaultName: fsmStFailLicenseFileInstallLocal 

moClass: license:File 

Type: fsm

fsmStFailLicenseFileInstall:Remote

Fault Code:F17051

Message

[FSM:STAGE:FAILED|RETRY]: Installing license on subordinate(FSM-STAGE:sam:dme:LicenseFileInstall:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 17051 

mibFaultName: fsmStFailLicenseFileInstallRemote 

moClass: license:File 

Type: fsm

fsmStFailLicenseInstanceUpdateFlexlm:Local

Fault Code:F17053

Message

[FSM:STAGE:FAILED|RETRY]: Updating on primary(FSM-STAGE:sam:dme:LicenseInstanceUpdateFlexlm:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 17053 

mibFaultName: fsmStFailLicenseInstanceUpdateFlexlmLocal 

moClass: license:Instance 

Type: fsm

fsmStFailLicenseInstanceUpdateFlexlm:Remote

Fault Code:F17053

Message

[FSM:STAGE:FAILED|RETRY]: Updating on subordinate(FSM-STAGE:sam:dme:LicenseInstanceUpdateFlexlm:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 17053 

mibFaultName: fsmStFailLicenseInstanceUpdateFlexlmRemote 

moClass: license:Instance 

Type: fsm

fsmStFailLsServerConfigure:AnalyzeImpact

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Analyzing changes impact(FSM-STAGE:sam:dme:LsServerConfigure:AnalyzeImpact)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: analyze-impact-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureAnalyzeImpact 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:ApplyConfig

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Applying config to server [pnDn](FSM-STAGE:sam:dme:LsServerConfigure:ApplyConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-config-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureApplyConfig 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:ApplyIdentifiers

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Resolving and applying identifiers(FSM-STAGE:sam:dme:LsServerConfigure:ApplyIdentifiers)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-identifiers-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureApplyIdentifiers 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:ApplyPolicies

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Resolving and applying policies(FSM-STAGE:sam:dme:LsServerConfigure:ApplyPolicies)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-policies-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureApplyPolicies 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:ApplyTemplate

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Applying configuration template [srcTemplName](FSM-STAGE:sam:dme:LsServerConfigure:ApplyTemplate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: apply-template-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureApplyTemplate 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:EvaluateAssociation

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Evaluate association with server [pnDn](FSM-STAGE:sam:dme:LsServerConfigure:EvaluateAssociation)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: evaluate-association-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureEvaluateAssociation 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:ResolveBootConfig

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Computing binding changes(FSM-STAGE:sam:dme:LsServerConfigure:ResolveBootConfig)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: resolve-boot-config-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureResolveBootConfig 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:WaitForMaintPermission

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for ack or maint window(FSM-STAGE:sam:dme:LsServerConfigure:WaitForMaintPermission)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-maint-permission-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureWaitForMaintPermission 

moClass: ls:Server 

Type: fsm

fsmStFailLsServerConfigure:WaitForMaintWindow

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: Waiting for maintenance window(FSM-STAGE:sam:dme:LsServerConfigure:WaitForMaintWindow)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: wait-for-maint-window-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailLsServerConfigureWaitForMaintWindow 

moClass: ls:Server 

Type: fsm

fsmStFailMgmtBackupBackup:backupLocal

Fault Code:F16683

Message

[FSM:STAGE:FAILED|RETRY]: internal database backup(FSM-STAGE:sam:dme:MgmtBackupBackup:backupLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: backup-local-failed 

mibFaultCode: 16683 

mibFaultName: fsmStFailMgmtBackupBackupBackupLocal 

moClass: mgmt:Backup 

Type: fsm

fsmStFailMgmtBackupBackup:upload

Fault Code:F16683

Message

[FSM:STAGE:FAILED|RETRY]: internal system backup(FSM-STAGE:sam:dme:MgmtBackupBackup:upload)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: upload-failed 

mibFaultCode: 16683 

mibFaultName: fsmStFailMgmtBackupBackupUpload 

moClass: mgmt:Backup 

Type: fsm

fsmStFailMgmtControllerActivateBMC:Activate

Fault Code:F16657

Message

[FSM:STAGE:FAILED|RETRY]: activating backup image of CIMC(FSM-STAGE:sam:dme:MgmtControllerActivateBMC:Activate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-failed 

mibFaultCode: 16657 

mibFaultName: fsmStFailMgmtControllerActivateBMCActivate 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerActivateBMC:Reset

Fault Code:F16657

Message

[FSM:STAGE:FAILED|RETRY]: Resetting CIMC to boot the activated version(FSM-STAGE:sam:dme:MgmtControllerActivateBMC:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 16657 

mibFaultName: fsmStFailMgmtControllerActivateBMCReset 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerActivateIOM:Activate

Fault Code:F16655

Message

[FSM:STAGE:FAILED|RETRY]: activating backup image of IOM(FSM-STAGE:sam:dme:MgmtControllerActivateIOM:Activate)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: activate-failed 

mibFaultCode: 16655 

mibFaultName: fsmStFailMgmtControllerActivateIOMActivate 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerActivateIOM:Reset

Fault Code:F16655

Message

[FSM:STAGE:FAILED|RETRY]: Resetting IOM to boot the activated version(FSM-STAGE:sam:dme:MgmtControllerActivateIOM:Reset)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-failed 

mibFaultCode: 16655 

mibFaultName: fsmStFailMgmtControllerActivateIOMReset 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerExtMgmtIfConfig:Primary

Fault Code:F16518

Message

[FSM:STAGE:FAILED|RETRY]: external mgmt interface configuration on primary(FSM-STAGE:sam:dme:MgmtControllerExtMgmtIfConfig:Primary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: primary-failed 

mibFaultCode: 16518 

mibFaultName: fsmStFailMgmtControllerExtMgmtIfConfigPrimary 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerExtMgmtIfConfig:Secondary

Fault Code:F16518

Message

[FSM:STAGE:FAILED|RETRY]: external mgmt interface configuration on secondary(FSM-STAGE:sam:dme:MgmtControllerExtMgmtIfConfig:Secondary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: secondary-failed 

mibFaultCode: 16518 

mibFaultName: fsmStFailMgmtControllerExtMgmtIfConfigSecondary 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerOnline:BmcConfigureConnLocal

Fault Code:F17169

Message

[FSM:STAGE:FAILED|RETRY]: Configuring connectivity on CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:BmcConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-local-failed 

mibFaultCode: 17169 

mibFaultName: fsmStFailMgmtControllerOnlineBmcConfigureConnLocal 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerOnline:BmcConfigureConnPeer

Fault Code:F17169

Message

[FSM:STAGE:FAILED|RETRY]: Configuring connectivity on CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:BmcConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: bmc-configure-conn-peer-failed 

mibFaultCode: 17169 

mibFaultName: fsmStFailMgmtControllerOnlineBmcConfigureConnPeer 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerOnline:SwConfigureConnLocal

Fault Code:F17169

Message

[FSM:STAGE:FAILED|RETRY]: Configuring fabric-interconnect connectivity to CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:SwConfigureConnLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-local-failed 

mibFaultCode: 17169 

mibFaultName: fsmStFailMgmtControllerOnlineSwConfigureConnLocal 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerOnline:SwConfigureConnPeer

Fault Code:F17169

Message

[FSM:STAGE:FAILED|RETRY]: Configuring fabric-interconnect connectivity to CIMC(FSM-STAGE:sam:dme:MgmtControllerOnline:SwConfigureConnPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: sw-configure-conn-peer-failed 

mibFaultCode: 17169 

mibFaultName: fsmStFailMgmtControllerOnlineSwConfigureConnPeer 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerSysConfig:Primary

Fault Code:F16823

Message

[FSM:STAGE:FAILED|RETRY]: system configuration on primary(FSM-STAGE:sam:dme:MgmtControllerSysConfig:Primary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: primary-failed 

mibFaultCode: 16823 

mibFaultName: fsmStFailMgmtControllerSysConfigPrimary 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerSysConfig:Secondary

Fault Code:F16823

Message

[FSM:STAGE:FAILED|RETRY]: system configuration on secondary(FSM-STAGE:sam:dme:MgmtControllerSysConfig:Secondary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: secondary-failed 

mibFaultCode: 16823 

mibFaultName: fsmStFailMgmtControllerSysConfigSecondary 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateBMC:PollUpdateStatus

Fault Code:F16656

Message

[FSM:STAGE:FAILED|RETRY]: waiting for update to complete(FSM-STAGE:sam:dme:MgmtControllerUpdateBMC:PollUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-failed 

mibFaultCode: 16656 

mibFaultName: fsmStFailMgmtControllerUpdateBMCPollUpdateStatus 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateBMC:UpdateRequest

Fault Code:F16656

Message

[FSM:STAGE:FAILED|RETRY]: sending update request to CIMC(FSM-STAGE:sam:dme:MgmtControllerUpdateBMC:UpdateRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-failed 

mibFaultCode: 16656 

mibFaultName: fsmStFailMgmtControllerUpdateBMCUpdateRequest 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateIOM:PollUpdateStatus

Fault Code:F16654

Message

[FSM:STAGE:FAILED|RETRY]: waiting for IOM update(FSM-STAGE:sam:dme:MgmtControllerUpdateIOM:PollUpdateStatus)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: poll-update-status-failed 

mibFaultCode: 16654 

mibFaultName: fsmStFailMgmtControllerUpdateIOMPollUpdateStatus 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateIOM:UpdateRequest

Fault Code:F16654

Message

[FSM:STAGE:FAILED|RETRY]: sending update request to IOM(FSM-STAGE:sam:dme:MgmtControllerUpdateIOM:UpdateRequest)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-request-failed 

mibFaultCode: 16654 

mibFaultName: fsmStFailMgmtControllerUpdateIOMUpdateRequest 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateSwitch:resetLocal

Fault Code:F16653

Message

[FSM:STAGE:FAILED|RETRY]: rebooting local fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:resetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-local-failed 

mibFaultCode: 16653 

mibFaultName: fsmStFailMgmtControllerUpdateSwitchResetLocal 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateSwitch:resetRemote

Fault Code:F16653

Message

[FSM:STAGE:FAILED|RETRY]: rebooting remote fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:resetRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: reset-remote-failed 

mibFaultCode: 16653 

mibFaultName: fsmStFailMgmtControllerUpdateSwitchResetRemote 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateSwitch:updateLocal

Fault Code:F16653

Message

[FSM:STAGE:FAILED|RETRY]: updating local fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:updateLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-local-failed 

mibFaultCode: 16653 

mibFaultName: fsmStFailMgmtControllerUpdateSwitchUpdateLocal 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateSwitch:updateRemote

Fault Code:F16653

Message

[FSM:STAGE:FAILED|RETRY]: updating peer fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:updateRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-remote-failed 

mibFaultCode: 16653 

mibFaultName: fsmStFailMgmtControllerUpdateSwitchUpdateRemote 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateSwitch:verifyLocal

Fault Code:F16653

Message

[FSM:STAGE:FAILED|RETRY]: verifying boot variables for local fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:verifyLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: verify-local-failed 

mibFaultCode: 16653 

mibFaultName: fsmStFailMgmtControllerUpdateSwitchVerifyLocal 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateSwitch:verifyRemote

Fault Code:F16653

Message

[FSM:STAGE:FAILED|RETRY]: verifying boot variables for remote fabric interconnect(FSM-STAGE:sam:dme:MgmtControllerUpdateSwitch:verifyRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: verify-remote-failed 

mibFaultCode: 16653 

mibFaultName: fsmStFailMgmtControllerUpdateSwitchVerifyRemote 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateUCSManager:execute

Fault Code:F16815

Message

[FSM:STAGE:FAILED|RETRY]: Updating UCS Manager firmware(FSM-STAGE:sam:dme:MgmtControllerUpdateUCSManager:execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16815 

mibFaultName: fsmStFailMgmtControllerUpdateUCSManagerExecute 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtControllerUpdateUCSManager:start

Fault Code:F16815

Message

[FSM:STAGE:FAILED|RETRY]: Scheduling UCS manager update(FSM-STAGE:sam:dme:MgmtControllerUpdateUCSManager:start)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: start-failed 

mibFaultCode: 16815 

mibFaultName: fsmStFailMgmtControllerUpdateUCSManagerStart 

moClass: mgmt:Controller 

Type: fsm

fsmStFailMgmtIfDisableVip:Peer

Fault Code:F16681

Message

[FSM:STAGE:FAILED|RETRY]: Disable virtual interface on peer fabric interconnect(FSM-STAGE:sam:dme:MgmtIfDisableVip:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16681 

mibFaultName: fsmStFailMgmtIfDisableVipPeer 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtIfEnableHA:Local

Fault Code:F16682

Message

[FSM:STAGE:FAILED|RETRY]: Transition from single to cluster mode(FSM-STAGE:sam:dme:MgmtIfEnableHA:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16682 

mibFaultName: fsmStFailMgmtIfEnableHALocal 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtIfEnableVip:Local

Fault Code:F16680

Message

[FSM:STAGE:FAILED|RETRY]: Enable virtual interface on local fabric interconnect(FSM-STAGE:sam:dme:MgmtIfEnableVip:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16680 

mibFaultName: fsmStFailMgmtIfEnableVipLocal 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtIfSwMgmtInbandIfConfig:Switch

Fault Code:F16674

Message

[FSM:STAGE:FAILED|RETRY]: configuring the inband interface(FSM-STAGE:sam:dme:MgmtIfSwMgmtInbandIfConfig:Switch)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: switch-failed 

mibFaultCode: 16674 

mibFaultName: fsmStFailMgmtIfSwMgmtInbandIfConfigSwitch 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtIfSwMgmtOobIfConfig:Switch

Fault Code:F16673

Message

[FSM:STAGE:FAILED|RETRY]: configuring the out-of-band interface(FSM-STAGE:sam:dme:MgmtIfSwMgmtOobIfConfig:Switch)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: switch-failed 

mibFaultCode: 16673 

mibFaultName: fsmStFailMgmtIfSwMgmtOobIfConfigSwitch 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtIfVirtualIfConfig:Local

Fault Code:F16679

Message

[FSM:STAGE:FAILED|RETRY]: Updating virtual interface on local fabric interconnect(FSM-STAGE:sam:dme:MgmtIfVirtualIfConfig:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16679 

mibFaultName: fsmStFailMgmtIfVirtualIfConfigLocal 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtIfVirtualIfConfig:Remote

Fault Code:F16679

Message

[FSM:STAGE:FAILED|RETRY]: Updating virtual interface on peer fabric interconnect(FSM-STAGE:sam:dme:MgmtIfVirtualIfConfig:Remote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: remote-failed 

mibFaultCode: 16679 

mibFaultName: fsmStFailMgmtIfVirtualIfConfigRemote 

moClass: mgmt:If 

Type: fsm

fsmStFailMgmtImporterImport:config

Fault Code:F16684

Message

[FSM:STAGE:FAILED|RETRY]: importing the configuration file(FSM-STAGE:sam:dme:MgmtImporterImport:config)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: config-failed 

mibFaultCode: 16684 

mibFaultName: fsmStFailMgmtImporterImportConfig 

moClass: mgmt:Importer 

Type: fsm

fsmStFailMgmtImporterImport:downloadLocal

Fault Code:F16684

Message

[FSM:STAGE:FAILED|RETRY]: downloading the configuration file from the remote location(FSM-STAGE:sam:dme:MgmtImporterImport:downloadLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: download-local-failed 

mibFaultCode: 16684 

mibFaultName: fsmStFailMgmtImporterImportDownloadLocal 

moClass: mgmt:Importer 

Type: fsm

fsmStFailMgmtImporterImport:reportResults

Fault Code:F16684

Message

[FSM:STAGE:FAILED|RETRY]: Report results of configuration application(FSM-STAGE:sam:dme:MgmtImporterImport:reportResults)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: report-results-failed 

mibFaultCode: 16684 

mibFaultName: fsmStFailMgmtImporterImportReportResults 

moClass: mgmt:Importer 

Type: fsm

fsmStFailPkiEpUpdateEp:SetKeyRingLocal

Fault Code:F16579

Message

[FSM:STAGE:FAILED|RETRY]: keyring configuration on primary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-key-ring-local-failed 

mibFaultCode: 16579 

mibFaultName: fsmStFailPkiEpUpdateEpSetKeyRingLocal 

moClass: pki:Ep 

Type: fsm

fsmStFailPkiEpUpdateEp:SetKeyRingPeer

Fault Code:F16579

Message

[FSM:STAGE:FAILED|RETRY]: keyring configuration on secondary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-key-ring-peer-failed 

mibFaultCode: 16579 

mibFaultName: fsmStFailPkiEpUpdateEpSetKeyRingPeer 

moClass: pki:Ep 

Type: fsm

fsmStFailPortPIoInCompatSfpPresence:Shutdown

Fault Code:F17089

Message

[FSM:STAGE:FAILED|RETRY]: Shutting down port(FSM-STAGE:sam:dme:PortPIoInCompatSfpPresence:Shutdown)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: shutdown-failed 

mibFaultCode: 17089 

mibFaultName: fsmStFailPortPIoInCompatSfpPresenceShutdown 

moClass: port:PIo 

Type: fsm

fsmStFailQosclassDefinitionConfigGlobalQoS:SetLocal

Fault Code:F16745

Message

[FSM:STAGE:FAILED|RETRY]: QoS Classification Definition [name] configuration on primary(FSM-STAGE:sam:dme:QosclassDefinitionConfigGlobalQoS:SetLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-local-failed 

mibFaultCode: 16745 

mibFaultName: fsmStFailQosclassDefinitionConfigGlobalQoSSetLocal 

moClass: qosclass:Definition 

Type: fsm

fsmStFailQosclassDefinitionConfigGlobalQoS:SetPeer

Fault Code:F16745

Message

[FSM:STAGE:FAILED|RETRY]: QoS Classification Definition [name] configuration on secondary(FSM-STAGE:sam:dme:QosclassDefinitionConfigGlobalQoS:SetPeer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-peer-failed 

mibFaultCode: 16745 

mibFaultName: fsmStFailQosclassDefinitionConfigGlobalQoSSetPeer 

moClass: qosclass:Definition 

Type: fsm

fsmStFailStatsCollectionPolicyUpdateEp:SetEpA

Fault Code:F16579

Message

[FSM:STAGE:FAILED|RETRY]: Update endpoint on fabric interconnect A(FSM-STAGE:sam:dme:StatsCollectionPolicyUpdateEp:SetEpA)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-afailed 

mibFaultCode: 16579 

mibFaultName: fsmStFailStatsCollectionPolicyUpdateEpSetEpA 

moClass: stats:CollectionPolicy 

Type: fsm

fsmStFailStatsCollectionPolicyUpdateEp:SetEpB

Fault Code:F16579

Message

[FSM:STAGE:FAILED|RETRY]: Update endpoint on fabric interconnect B(FSM-STAGE:sam:dme:StatsCollectionPolicyUpdateEp:SetEpB)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: set-ep-bfailed 

mibFaultCode: 16579 

mibFaultName: fsmStFailStatsCollectionPolicyUpdateEpSetEpB 

moClass: stats:CollectionPolicy 

Type: fsm

fsmStFailSwAccessDomainDeploy:UpdateConnectivity

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: internal network configuration on [switchId](FSM-STAGE:sam:dme:SwAccessDomainDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailSwAccessDomainDeployUpdateConnectivity 

moClass: sw:AccessDomain 

Type: fsm

fsmStFailSwEthLanBorderDeploy:UpdateConnectivity

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: Uplink eth port configuration on [switchId](FSM-STAGE:sam:dme:SwEthLanBorderDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailSwEthLanBorderDeployUpdateConnectivity 

moClass: sw:EthLanBorder 

Type: fsm

fsmStFailSwEthMonDeploy:UpdateEthMon

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: Ethernet traffic monitor (SPAN)configuration on [switchId](FSM-STAGE:sam:dme:SwEthMonDeploy:UpdateEthMon)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-eth-mon-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailSwEthMonDeployUpdateEthMon 

moClass: sw:EthMon 

Type: fsm

fsmStFailSwFcMonDeploy:UpdateFcMon

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: FC traffic monitor (SPAN)configuration on [switchId](FSM-STAGE:sam:dme:SwFcMonDeploy:UpdateFcMon)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-fc-mon-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailSwFcMonDeployUpdateFcMon 

moClass: sw:FcMon 

Type: fsm

fsmStFailSwFcSanBorderDeploy:UpdateConnectivity

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: Uplink fc port configuration on [switchId](FSM-STAGE:sam:dme:SwFcSanBorderDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailSwFcSanBorderDeployUpdateConnectivity 

moClass: sw:FcSanBorder 

Type: fsm

fsmStFailSwUtilityDomainDeploy:UpdateConnectivity

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: Utility network configuration on [switchId](FSM-STAGE:sam:dme:SwUtilityDomainDeploy:UpdateConnectivity)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: update-connectivity-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailSwUtilityDomainDeployUpdateConnectivity 

moClass: sw:UtilityDomain 

Type: fsm

fsmStFailSyntheticFsObjCreate:createLocal

Fault Code:F16641

Message

[FSM:STAGE:FAILED|RETRY]: create on primary(FSM-STAGE:sam:dme:SyntheticFsObjCreate:createLocal)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: create-local-failed 

mibFaultCode: 16641 

mibFaultName: fsmStFailSyntheticFsObjCreateCreateLocal 

moClass: synthetic:FsObj 

Type: fsm

fsmStFailSyntheticFsObjCreate:createRemote

Fault Code:F16641

Message

[FSM:STAGE:FAILED|RETRY]: create on secondary(FSM-STAGE:sam:dme:SyntheticFsObjCreate:createRemote)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: create-remote-failed 

mibFaultCode: 16641 

mibFaultName: fsmStFailSyntheticFsObjCreateCreateRemote 

moClass: synthetic:FsObj 

Type: fsm

fsmStFailSysdebugAutoCoreFileExportTargetConfigure:Local

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: configuring automatic core file export service on local(FSM-STAGE:sam:dme:SysdebugAutoCoreFileExportTargetConfigure:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailSysdebugAutoCoreFileExportTargetConfigureLocal 

moClass: sysdebug:AutoCoreFileExportTarget 

Type: fsm

fsmStFailSysdebugAutoCoreFileExportTargetConfigure:Peer

Fault Code:F16995

Message

[FSM:STAGE:FAILED|RETRY]: configuring automatic core file export service on peer(FSM-STAGE:sam:dme:SysdebugAutoCoreFileExportTargetConfigure:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16995 

mibFaultName: fsmStFailSysdebugAutoCoreFileExportTargetConfigurePeer 

moClass: sysdebug:AutoCoreFileExportTarget 

Type: fsm

fsmStFailSysdebugCoreDownload:CopyPrimary

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Copy the Core file to primary for download(FSM-STAGE:sam:dme:SysdebugCoreDownload:CopyPrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-primary-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugCoreDownloadCopyPrimary 

moClass: sysdebug:Core 

Type: fsm

fsmStFailSysdebugCoreDownload:CopySub

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: copy Core file on subordinate switch to tmp directory(FSM-STAGE:sam:dme:SysdebugCoreDownload:CopySub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-sub-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugCoreDownloadCopySub 

moClass: sysdebug:Core 

Type: fsm

fsmStFailSysdebugCoreDownload:DeletePrimary

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Delete the Core file from primary switch under tmp directory(FSM-STAGE:sam:dme:SysdebugCoreDownload:DeletePrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-primary-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugCoreDownloadDeletePrimary 

moClass: sysdebug:Core 

Type: fsm

fsmStFailSysdebugCoreDownload:DeleteSub

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Delete the Core file from subordinate under tmp directory(FSM-STAGE:sam:dme:SysdebugCoreDownload:DeleteSub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-sub-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugCoreDownloadDeleteSub 

moClass: sysdebug:Core 

Type: fsm

fsmStFailSysdebugLogControlEpLogControlPersist:Local

Fault Code:F16606

Message

[FSM:STAGE:FAILED|RETRY]: persisting LogControl on local(FSM-STAGE:sam:dme:SysdebugLogControlEpLogControlPersist:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16606 

mibFaultName: fsmStFailSysdebugLogControlEpLogControlPersistLocal 

moClass: sysdebug:LogControlEp 

Type: fsm

fsmStFailSysdebugLogControlEpLogControlPersist:Peer

Fault Code:F16606

Message

[FSM:STAGE:FAILED|RETRY]: persisting LogControl on peer(FSM-STAGE:sam:dme:SysdebugLogControlEpLogControlPersist:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16606 

mibFaultName: fsmStFailSysdebugLogControlEpLogControlPersistPeer 

moClass: sysdebug:LogControlEp 

Type: fsm

fsmStFailSysdebugManualCoreFileExportTargetExport:Execute

Fault Code:F16604

Message

[FSM:STAGE:FAILED|RETRY]: export core file [name] to [hostname](FSM-STAGE:sam:dme:SysdebugManualCoreFileExportTargetExport:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16604 

mibFaultName: fsmStFailSysdebugManualCoreFileExportTargetExportExecute 

moClass: sysdebug:ManualCoreFileExportTarget 

Type: fsm

fsmStFailSysdebugTechSupportDeleteTechSupFile:Local

Fault Code:F17013

Message

[FSM:STAGE:FAILED|RETRY]: delete tech-support file from GUI on local(FSM-STAGE:sam:dme:SysdebugTechSupportDeleteTechSupFile:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 17013 

mibFaultName: fsmStFailSysdebugTechSupportDeleteTechSupFileLocal 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysdebugTechSupportDeleteTechSupFile:peer

Fault Code:F17013

Message

[FSM:STAGE:FAILED|RETRY]: delete tech-support file from GUI on peer(FSM-STAGE:sam:dme:SysdebugTechSupportDeleteTechSupFile:peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 17013 

mibFaultName: fsmStFailSysdebugTechSupportDeleteTechSupFilePeer 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysdebugTechSupportDownload:CopyPrimary

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Copy the tech-support file to primary for download(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:CopyPrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-primary-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugTechSupportDownloadCopyPrimary 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysdebugTechSupportDownload:CopySub

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: copy tech-support file on subordinate switch to tmp directory(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:CopySub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: copy-sub-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugTechSupportDownloadCopySub 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysdebugTechSupportDownload:DeletePrimary

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Delete the tech-support file from primary switch under tmp directory(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:DeletePrimary)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-primary-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugTechSupportDownloadDeletePrimary 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysdebugTechSupportDownload:DeleteSub

Fault Code:F16650

Message

[FSM:STAGE:FAILED|RETRY]: Delete the tech-support file from subordinate under tmp directory(FSM-STAGE:sam:dme:SysdebugTechSupportDownload:DeleteSub)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: delete-sub-failed 

mibFaultCode: 16650 

mibFaultName: fsmStFailSysdebugTechSupportDownloadDeleteSub 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysdebugTechSupportInitiate:Local

Fault Code:F17012

Message

[FSM:STAGE:FAILED|RETRY]: create tech-support file from GUI on local(FSM-STAGE:sam:dme:SysdebugTechSupportInitiate:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 17012 

mibFaultName: fsmStFailSysdebugTechSupportInitiateLocal 

moClass: sysdebug:TechSupport 

Type: fsm

fsmStFailSysfileMutationGlobal:Local

Fault Code:F16601

Message

[FSM:STAGE:FAILED|RETRY]: remove files from local(FSM-STAGE:sam:dme:SysfileMutationGlobal:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16601 

mibFaultName: fsmStFailSysfileMutationGlobalLocal 

moClass: sysfile:Mutation 

Type: fsm

fsmStFailSysfileMutationGlobal:Peer

Fault Code:F16601

Message

[FSM:STAGE:FAILED|RETRY]: remove files from peer(FSM-STAGE:sam:dme:SysfileMutationGlobal:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16601 

mibFaultName: fsmStFailSysfileMutationGlobalPeer 

moClass: sysfile:Mutation 

Type: fsm

fsmStFailSysfileMutationSingle:Execute

Fault Code:F16600

Message

[FSM:STAGE:FAILED|RETRY]: [action] file [name](FSM-STAGE:sam:dme:SysfileMutationSingle:Execute)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: execute-failed 

mibFaultCode: 16600 

mibFaultName: fsmStFailSysfileMutationSingleExecute 

moClass: sysfile:Mutation 

Type: fsm

fsmStFailVnicProfileSetDeploy:Local

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: VNIC profile configuration on local fabric(FSM-STAGE:sam:dme:VnicProfileSetDeploy:Local)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: local-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailVnicProfileSetDeployLocal 

moClass: vnic:ProfileSet 

Type: fsm

fsmStFailVnicProfileSetDeploy:Peer

Fault Code:F16749

Message

[FSM:STAGE:FAILED|RETRY]: VNIC profile configuration on peer fabric(FSM-STAGE:sam:dme:VnicProfileSetDeploy:Peer)

Explanation

None set.

Recommended Action

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. Also refer to the Release Notes for Cisco UCS Manager and the Cisco UCS Troubleshooting Guide. If you cannot resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

Fault Details 

Severity: warning 

Cause: peer-failed 

mibFaultCode: 16749 

mibFaultName: fsmStFailVnicProfileSetDeployPeer 

moClass: vnic:ProfileSet 

Type: fsm