Contents
Index
B
BIOSusing the setup utility 1C
CIMC firmware, updating 1E
environmental specifications 1F
firmwareupdating CIMC 1I
initial power-on and setup (standalone) 1installationinitial power-on and setup (standalone) 1preparing for installation 1rack installation 1rack requirements 1required equipment 1site preparation guidelines 1slide rails 1P
physical specifications 1powerspecifications 1supported power cords 1power cordsjumper power cord (figure) 1supported power cords (figure) 1power cords supported 1power plugs 1preparing for server installation 1R
rack requirements 1required equipmentinstallation 1S
site preparation guidelines 1slide rail installation 1specificationsenvironmental 1physical 1power 1
Cisco 8540 Wireless Controller Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- November 17, 2016
Feedback