The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
To enable Bonjour globally, use the bonjour enable command in Global Configuration mode. To disable Bonjour globally, use the no format of the command.
bonjour enable
no bonjour enable.
Enable
Global Configuration mode
switchxxxxxx(config)# bonjour enable
To add L2 interfaces to the Bonjour L2 interface list, use the bonjour interface range command in Global Configuration mode. To remove L2 interfaces from this list, use the no format of the command.
bonjour interface range interface-list
no bonjour interface range [interface-list]
interface-list—Specifies a list of interfaces. Only interfaces supporting L2 Multicast forwarding can be specified. The follow: LAN and point, which support be of the following types: OOB, Ethernet port, Port-channel, and VLAN.
The list includes the Default VLAN and OOB.
Global Configuration mode
The Bonjour L2 interface list specifies a set of interfaces on which Bonjour is enabled.
Use the bonjour interface range interface-list command, to add the specified interfaces to the Bonjour L2 interface list.
Use the no bonjour interface range interface-list command, to remove the specified interfaces from the Bonjour L2 interface list.
Use the no bonjour interface range command, to clear the Bonjour L2 interface list.
switchxxxxxx(config)# bonjour interface range VLAN 100-103
To display Bonjour information, use the show bonjour command in Privileged EXEC mode.
show bonjour [interface-id]
interface-id—Specifies an interface.
Privileged EXEC mode
The example displays Bonjour status.
switchxxxxxx# show bonjour
Bonjour global status: enabled
Bonjour L2 interfaces list: vlans 1
Service Admin Status Oper Status
------- ------------ --------------
csco-sb enabled enabled
http enabled enabled
https enabled disabled
ssh enabled disabled
telnet enabled disabled
Feedback