- Preface
- Command-Line Interface
- action to channel-group
- channel-protocol to class-map
- clear cable-diagnostics tdr to copy /noverify
- define interface-range to duplex
- eigrp event-log-size to mls exclude
- mls flow to pagp port
- platform ip features pisa to process-min-time percent
- rcv-queue to show bootvar
- show cable-diagnostics to show ip cache
- show ip cef to show mls asic
- show mls cef to show qm-sp
- show queueing to show vtp
- shutdown vlan to test cable-diagnostics
- tunnel udlr address-resolution to username
- verify to wrr-queue
- wrr-queue cos-trap to wrr-queue threshold
- Acronyms
- Acknowledgments for Open-Source Software
Notes
NOTE: The command in this document apply only to the Supervisor Engine 32 PISA. Release 12.2ZY does not support any other supervisor engines.
For additional information about Cisco Catalyst 6500 Series Switches (including configuration examples and troubleshooting information), see the documents listed on this page:
http://www.cisco.com/en/US/products/hw/switches/ps708/tsd_products_support_series_home.html