site-type
Use the site-type command in system configuration mode to configure the site type of a router. Use the no form of the command to remove the site type assignment.
site-type site-list
no site-type site-list
Syntax Description
| site-type site-list |
Assigns up to four site types to a device. Possible values are br, branch, cloud, spoke, type-1, type-2, and type-3. |
Command Default
By default, a router has no site type.
Command Modes
System (config-system)
Command History
| Release | Modification |
|---|---|
|
Cisco IOS XE Catalyst SD-WAN Release 17.12.1a |
This command was introduced. |
Example
The following example configures a router site type as cloud:
Device(config)#system
Device (config-system)# site-type cloudThe following example configures a router with site types cloud and branch:
Device(config)#system
Device (config-system)# site-type cloud branchThe following example configures a router with site types cloud and branch, then removes the site type cloud, so that in the end, the router is configured only with site type branch:
Device(config)#system
Device (config-system)# site-type cloud branch
Device(config-system)# no site-type cloud
Feedback