Modify Network Properties
Feature Name |
Release Information |
Description |
---|---|---|
Improved Optical Results |
Cisco ONP Release 24.3.1 |
The new network-level properties introduced improve the accuracy of the optical results.
Also, Cisco ONP sets PSD and drop attenuation to specific values for the CCMD-16 LC card connected to the ports of the OLT-E-C, to achieve optimal RX power for the circuits. |
Skip Routing Failures in NCS 2000 Network Analysis |
Cisco ONP Release 24.3.1 |
A new Continue Analysis On Routing Failure check box is introduced to improve network analysis reliability for larger NCS 2000 networks. When a routing failure occurs, this enhancement moves the network to Partially Analysed mode, and move the network to Design or Upgrade mode to edit properties and correct routing. After the analysis,
This approach prevents a single failure from failing the entire analysis, isolating specific issues to enhance troubleshooting. |
Feature Name |
Release Information |
Description |
---|---|---|
New Network Level Properties |
Cisco ONP Release 5.2 |
New Network Level properties are introduced under Advanced Optical Settings for NCS 1010 network. You have the flexibility to define custom values for the following properties for the Raman span and validate the optical circuit feasibility.
|
Feature Name |
Release Information |
Description |
---|---|---|
New Bandwidth Properties |
Cisco ONP Release 5.1 |
Cisco ONP introduces the Statistical Simulation Sigma, Statistical Simulation Margin Sigma, and OSNR Resolution Bandwidth properties in this release. When the ideal OSNR values calculated by Cisco ONP are not feasible to be used at the time of deployment, you can modify the values for these properties to customize OSNR margin, power margin, and G-OSNR values to fix the fiber span issues. |
New Network Level Properties |
Cisco ONP Release 5.1 |
Three new Network Level properties are introduced to enable you to customize the core operations of an NCS 2000 Network. These operations ran in the background in the earlier releases. The new properties available under Core Operations as check boxes are:
|
BOM Customization for the UCS-based SVO Server Application |
Cisco ONP Release 5.1 |
From this release onwards, the BOM does not include any UCS-based SVO server information. It is expected that you add the server PID and quantities manually. Cisco ONP prompts you to add the server by displaying the message "UCS server is not billed in BoM, please add it as needed." in the Messages tab of the Elements tab. |
Before you begin
Procedure
Step 1 |
In the network tree, click the network name. You can view the basic properties of the network at the bottom of the network tree. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Step 2 |
Modify the following network properties as required.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Step 3 |
Click Update. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Step 4 |
To modify the advanced properties of the service, click Show Advanced Properties or choose . |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Step 5 |
In the Entity Editor window, click the Site tab. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Step 6 |
Click the network, and modify the properties in the right pane. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Step 7 |
Click Update. |