Skip to content
Skip to search
Skip to footer

L2VPN and Ethernet Services Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 24.1.x , 24.2.x, 24.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 1, 2024

Chapter: New and Changed VPN Features

New and Changed VPN Features
New and Changed VPN Features

New and Changed VPN Features

This table summarizes the new and changed feature information for the L2VPN and Ethernet Services Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

New and Changed VPN Features

Table 1. VPN Features Added or Modified in IOS XR Release 24.x.x
Feature	Description	Changed in Release	Where Documented
Layer 3 Support for ITU-T Y.1564 Service Activation Test	This feature was introduced.	Release 24.3.1	Layer 3 Support for ITU-T Y.1564 Service Activation Test
Layer 2 VPN Bridging and VPWS Services over BGP-LU Underlay on the NCS57 Line Cards	This feature was modified.	Release 24.3.1	Layer 2 VPN Bridging and VPWS Services over BGP-LU Underlay
Layer 2 Fast Reroute on Cisco NCS 5700 series routers and line cards	This feature was introduced.	Release 24.2.1	Layer 2 Fast Reroute
Frame Delay Range for ITU-T Y.1564 Test	This feature is introduced.	Release 24.2.1	Frame Delay Range for ITU-T Y.1564 Test
Default Encapsulation Mode of ITU-T Y.1564	This feature is modified.	Release 24.2.1	Y.1564 - Ethernet Service Activation Test
User-Specified MTU for EMIX Traffic in ITU-T Y.1564	This feature is introduced.	Release 24.2.1	User-Specified MTU Support for EMIX Traffic in Service Activation Tests
EVPN Non-Revertive Designated Forwarder Electionone	This feature was introduced.	Release 24.1.1	EVPN Non-Revertive Designated Forwarder Election
Host-Tracking using BFD	This feature was introduced.	Release 24.1.1	Host-Tracking using BFD
Optional Source MAC Address for Y.1564 Service Activation Test	This feature is introduced.	Release 24.1.1	Optional Source MAC Address for Y.1564 Service Activation Test
Loopback Frames for Y.1564 Service Activation Test	This feature is introduced.	Release 24.1.1	Loopback Frames for Y.1564 Service Activation Test
Combined Frame Delay and Frame Loss Measurement for Y.1564 Service Activation Test	This feature is introduced.	Release 24.1.1	Combined Frame Delay and Frame Loss Measurement for Y.1564 Service Activation Test

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)