Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 24.1.x, 24.2.x, 24.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 2, 2024

Chapter: New and Changed Feature Information

New and Changed Feature Information
Routing Features Added or Modified in IOS XR Release 24.x.x

New and Changed Feature Information

This table summarizes the new and changed feature information for the Routing Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

Routing Features Added or Modified in IOS XR Release 24.x.x

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
LSP Fast-Flooding on IS-IS Networks	This feature was introduced.	Release 24.3.1	LSP Fast-Flooding on IS-IS Networks
Seamless Bidirectional Forwarding Detection	This feature was introduced.	Release 24.2.1	Seamless Bidirectional Forwarding Detection
Multi-area Loopback Interface for OSPF	This feature was introduced.	Release 24.2.1	Multi-area Loopback Interface Support for OSPF
Monitor the Per-Session BFD Hardware Offload Statistics	This feature was introduced.	Release 24.1.1	Monitor the Per-Session BFD Hardware Offload Statistics

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)