Console Port
The console port is an asynchronous RS-232 serial port with an RJ-45 connector.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides cable and port specifications for the Cisco NCS 5001 and 5002 Series routers.
The console port is an asynchronous RS-232 serial port with an RJ-45 connector.
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to a power distribution unit that has IEC 60320 C19 outlet receptacles. The standard power cords have an IEC C13 connector on the end that plugs into the router. The optional jumper power cords, for use in cabinets, have an IEC C13 connector on the end that plugs into the router and an IEC C14 connector on the end that plugs into an IEC C13 outlet receptacle.
Note |
Only the regular power cords or jumper power cords provided with the router are supported. |
The following table lists the power cords for the Cisco NCS 5000 Series router and provides their lengths in feet and meters.
Description |
Length |
Power Cord Reference Illustration |
|
---|---|---|---|
Feet |
Meters |
||
CAB-250V-10A-AR Power cord 250 VAC 10 A, IRAM 2073 plug Argentina |
8.2 |
2.5 |
|
CAB-9K10A-AU Power cord 250 VAC 10 A, 3112 plug, Australia |
8.2 |
2.5 |
|
CAB-250V-10A-CN Power cord 250 VAC 10 A, GB 2009 plug China |
8.2 |
2.5 |
|
CAB-9K10A-EU Power cord, 250 VAC 10 A, M 2511 plug Europe |
8.2 |
2.5 |
|
CAB250V-10A-ID Power cord 250 VAC 16A, EL-208 plug South Africa, United Arab Emirates, India |
8.2 |
2.5 |
|
CAB-250V-10A-IS Power cord 250 VAC 10 A, SI-32 plug Israel |
8.2 |
2.5 |
|
CAB-9K10A-IT Power cord 250 VAC 10 A, CEI 23-16 plug Italy |
8.2 |
2.5 |
|
CAB-9K10A-SW Power cord 250 VAC 10 A, MP232 plug Switzerland |
8.2 |
2.5 |
|
CAB-9K10A-UK Power cord 250 VAC 10 A, BS1363 plug (13 A fuse) United Kingdom |
8.2 |
2.5 |
|
CAB-AC-250V/13A Power cord 250 VAC 13 A, NEMA L6-20 plug North America |
6.6 |
2.0 |
|
CAB-N5K6A-NA Power cord 250 VAC 10 A, NEMA 6-15 plug North America |
8.2 |
2.5 |
|
CAB-9K12A-NA Power cord 125 VAC 13 A, NEMA 5-15 plug North America |
8.2 |
2.5 |
|
CAB-C13-CBN Power cord 250 VAC 10 A, SS 10A plug |
8.2 |
2.5 |
|
CAB-IND-10A Power cord 250 VAC 10 A, EL 208B plug |
8.2 |
2.5 |
|
CAB-C13-C14-JMPR Cabinet Jumper Power Cord 250 VAC 13 A, C13-C14 Connectors |
2.2 |
0.7 |
|
The following figure shows the plug connector on the optional jumper power cord for the Cisco NCS 5001 and 5002 Series routers. This cable plugs into the power supply, and the receptacle of a power distribution unit for a cabinet. This cable comes in 6- and 9-foot (2- and 3-meter) lengths.