OSPFv3 MIB

The OSPFv3 MIB feature enables remote monitoring and troubleshooting of Open Shortest Path First version 3 (OSPFv3) processes using standard Simple Network Management Protocol (SNMP) management workstations. The protocol information collected by the OSPFv3 MIB objects and trap objects can be used to derive statistics that helps monitor and improve overall network performance.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tooland the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Prerequisites for OSPFv3 MIB

  • Ensure that Open Shortest Path First version 3 (OSPFv3) is configured on the device.

  • Ensure that Simple Network Management Protocol (SNMP) is enabled on the device before notifications (traps) can be configured or before SNMP GET operations can be performed.

Restrictions for OSPFv3 MIB Support

  • To monitor multiple Open Shortest Path First version 3 (OSPFv3) processes, each process must be associated with a Simple Network Management Protocol (SNMP) context.

  • To monitor multiple VRFs, each VRF must be associated with an SNMP context.

Information About OSPFv3 MIB

OSPFv3 MIB

Open Shortest Path First version 3 (OSPFv3) is the IPv6 implementation of OSPF. The OSPFv3 MIB is documented in RFC 5643 and defines a MIB for managing OSPFv3 processes through Simple Network Management Protocol (SNMP).

Users can constantly monitor the changing state of an OSPF network by using MIB objects. The MIB objects gather information relating to protocol parameters and trap notification objects that can signal the occurrence of significant network events such as transition state changes.

OSPFv3 TRAP MIB

The ospfv3Notifications MIB object contains the OSPFv3 trap MIB objects that enable and disable OSPF traps in the Cisco IOS CLI. These OSPFv3 trap MIB objects are provided by the RFC 5643 standard OSPFv3 MIB.

How to Configure OSPFv3 MIB

Enabling Specific OSPFv3 Traps


Note

On a Cisco Catalyst 6880-X switch, you can configure the snmp-server enable traps ospfv3 command only with an Advanced Enterprise Services license. A Cisco Catalyst 6880-X switch operating with an IP Services license does not support the snmp-server enable traps ospfv3 command.

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. snmp-serverhost {hostname | ip-address } [vrf vrf-name ] [traps | informs ] [version {1 | 2c | 3 [auth | noauth | priv ]}] community-string [udp-port port ] [notification-type ]
  4. snmp-server enable traps ospfv3 errors [bad-packet ] [config-error ] [virt-bad-packet ] [virt-config-error ]
  5. snmp-server enable traps ospfv3 rate-limit seconds trap-number
  6. snmp-server enable traps ospfv3 state-change [if-state-change ] [neighbor-restart-helper-status-change ] [neighbor-state-change ] [nssa-translator-status-change ] [restart-status-change ] [virtif-state-change ] [virtneighbor-restart-helper-status-change ] [virtneighbor-state-change ]
  7. end

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:


Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

snmp-serverhost {hostname | ip-address } [vrf vrf-name ] [traps | informs ] [version {1 | 2c | 3 [auth | noauth | priv ]}] community-string [udp-port port ] [notification-type ]

Example:


Device(config)# snmp-server host 172.20.2.162 version 2c public ospfv3

Specifies a recipient (target host) for Simple Network Management Protocol (SNMP) notification operations.

  • If the notification-type is not specified, all enabled notifications (traps or informs) are sent to the specified host.

  • If you want to send only the Open Shortest Path First version 3 (OSPFv3) notifications to the specified host, you can use the optional ospfv3 keyword as the notification-types . Entering the ospfv3 keyword enables the ospfv3Notifications MIB object.

Step 4

snmp-server enable traps ospfv3 errors [bad-packet ] [config-error ] [virt-bad-packet ] [virt-config-error ]

Example:


Device(config)# snmp-server enable traps ospfv3 errors

Enables SNMP notifications for OSPFv3 errors.

Step 5

snmp-server enable traps ospfv3 rate-limit seconds trap-number

Example:


Device(config)# snmp-server enable traps ospfv3 rate-limit 20 20

Sets the rate limit for the number of SNMP OSPFv3 notifications that are sent in each OSPFv3 SNMP notification rate-limit window.

Step 6

snmp-server enable traps ospfv3 state-change [if-state-change ] [neighbor-restart-helper-status-change ] [neighbor-state-change ] [nssa-translator-status-change ] [restart-status-change ] [virtif-state-change ] [virtneighbor-restart-helper-status-change ] [virtneighbor-state-change ]

Example:


Device(config)# snmp-server enable traps ospfv3 state-change

Enables SNMP OSPFv3 notifications for OSPFv3 transition state changes.

Step 7

end

Example:


Device(config)# end

Exits global configuration mode and enters privileged EXEC mode.

Verifying OSPFv3 MIB Traps on the Device

SUMMARY STEPS

  1. enable
  2. show running-config [options ]

DETAILED STEPS

Step 1

enable

Example:


Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

show running-config [options ]

Example:


Device# show running-config | include traps

Displays the contents of the currently running configuration file and includes information about enabled traps.

  • Verifies which traps are enabled.

Configuration Examples for OSPFv3 MIB

Example: Enabling and Verifying OSPFv3 MIB Traps

The following example shows how to enable all OSPFv3 error traps:


Device> enable
Device# configure terminal
Device(config)# snmp-server enable traps ospfv3 errors
Device(config)# end

The following example shows how to verify that the traps are enabled: 


Device> enable
Device# show running-config | include traps

snmp-server enable traps ospfv3 errors

Additional References for OSPFv3 MIB

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Command List, All Releases

OSPF commands

Cisco IOS IP Routing: OSPF Command Reference

OSPF configuration tasks

“Configuring OSPF” module in IP Routing: OSPF Configuration Guide

Standards and RFCs

Standard

Title

RFC 5643

Management Information Base for OSPFv3

MIBs

MIB

MIBs Link

OSPFv3-MIB

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for OSPFv3 MIB

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for OSPFv3 MIB

Feature Name

Releases

Feature Information

OSPFv3 MIB

The OSPFv3 MIB feature enables remote monitoring and troubleshooting of OSPFv3 processes using standard SNMP management workstations.

The following commands were introduced or modified: snmp-server host , snmp-server enable traps ospfv3 errors , snmp-server enable traps ospfv3 rate-limit , snmp-server enable traps ospfv3 state-change .