BGP Graceful Shutdown

The BGP Graceful Shutdown feature reduces or eliminates the loss of traffic along a link being shut down for maintenance. Routers always have a valid route available during the convergence process. This feature is used primarily for maintenance on a link between a Provider Edge (PE), PE-PE, PE- Route Reflector (RR), PE-Customer Edge (CE) and CE.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Information About BGP Graceful Shutdown

Purpose and Benefits of BGP Graceful Shutdown

There are times when planned maintenance operations cause routing changes in BGP. After the shutdown of eBGP and iBGP peering sessions between autonomous system border routers (ASBRs), BGP devices are temporarily unreachable during BGP convergence. The goal of gracefully shutting down one or more BGP sessions is to minimize traffic loss during the planned shutdown and subsequent reestablishment of the sessions.

The BGP Graceful Shutdown feature reduces or eliminates the loss of inbound or outbound traffic flows that were initially forwarded along the peering link that is being shut down for maintenance. This feature is primarily for PE-CE, PE-RR and PE-PE links. Lowering the local preference for paths received over the session being shutdown renders the affected paths less preferred by the BGP decision process, but still allows the paths to be used during the convergence while alternative paths are propagated to the affected devices. Therefore, devices always have a valid route available during the convergence process.

The feature also allows vendors to provide a graceful shutdown mechanism that does not require any router reconfiguration at maintenance time. The benefits of the BGP Graceful Shutdown feature are fewer lost packets and less time spent reconfiguring devices.

GSHUT Community

The GSHUT community is a well-known community used in conjunction with the BGP Graceful Shutdown feature. The GSHUT community attribute is applied to a neighbor specified by the neighbor shutdown graceful command, thereby gracefully shutting down the link in an expected number of seconds. The GSHUT community is always sent by the GSHUT initiator.

The GSHUT community is specified in a community list, which is referenced by a route map and then used to make policy routing decisions.

The GSHUT community can also be used in the show ip bgp community command to limit output to GSHUT routes.

BGP GSHUT Enhancement

The BGP Graceful Shutdown (GSHUT) Enhancement feature enables graceful shutdown of either all neighbors or only virtual routing and forwarding (VRF) neighbors across BGP sessions. To enable the BGP GSHUT enhancement feature on the device, you must configure either the community keyword or the local-preference keyword in the bgp graceful-shutdown all command. Use the activate keyword to activate graceful shutdown either across all neighbors or only across all VRF neighbors, across all BGP sessions.

How to Configure BGP Graceful Shutdown

Shutting Down a BGP Link Gracefully

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. router bgp autonomous-system-number
  4. neighbor {ipv4-address | ipv6-address } remote-as number
  5. neighbor {ipv4-address | ipv6-address | peer-group-name } shutdown graceful seconds {community value [local-preference value ] | local-preference value }
  6. end
  7. show ip bgp community gshut

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:


Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

router bgp autonomous-system-number

Example:


Device(config)# router bgp 5000

Configures a BGP routing process.

Step 4

neighbor {ipv4-address | ipv6-address } remote-as number

Example:


Device(config-router)# neighbor 2001:db8:3::1 remote-as 5500

Configures the autonomous system (AS) to which the neighbor belongs.

Step 5

neighbor {ipv4-address | ipv6-address | peer-group-name } shutdown graceful seconds {community value [local-preference value ] | local-preference value }

Example:


Device(config-router)# neighbor 2001:db8:3::1 shutdown graceful 600 community 1200 local-preference 300

Configures the device to gracefully shut down the link to the specified peer in the specified number of seconds; advertises the route with the GSHUT (Graceful Shutdown) community; and advertises the route with another community or specifies a local preference value for the route, or both.

  • Make sure to specify an adequate amount of time for iBGP peers to converge and to choose an alternate path as the best path.

  • If the graceful keyword is used in the neighbor shutdown command, at least one of the two attributes (a community or local preference) must be configured. You may configure both attributes.

  • If the graceful keyword is used in the neighbor shutdown command, the route is advertised with the GSHUT community by default. You may also set one other community for policy routing purposes.

  • In this particular example, the route to the neighbor is configured to shut down in 600 seconds, is advertised with the GSHUT community and community 1200, and is configured with a local preference of 300.

  • The device receiving the advertisement looks at the community value(s) of the route and optionally uses the community value to apply routing policy. Filtering routes based on a community is done with the ip community-list command and a route map.

  • During the graceful shutdown, the neighbor shutdown command is not nvgened. After the timer expires, SHUTDOWN is nvgened.

Step 6

end

Example:


Device(config-router)# end

Returns to EXEC mode.

Step 7

show ip bgp community gshut

Example:


Device# show ip bgp community gshut

(Optional) Displays information about the routes that are advertised with the well-known GSHUT community.

Filtering BGP Routes Based on the GSHUT Community

Perform this task on a BGP peer to the device where you enabled the BGP Graceful Shutdown feature.

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. router bgp autonomous-system-number
  4. neighbor {ipv4-address | ipv6-address } remote-as number
  5. neighbor {ipv4-address | ipv6-address } activate
  6. neighbor {ipv4-address | ipv6-address } send-community
  7. exit
  8. route-map map-tag [permit | deny ] [sequence-number ]
  9. match community {standard-list-number | expanded-list-number | community-list-name [exact ]}
  10. exit
  11. ip community-list {standard | standard list-name} {deny | permit } gshut
  12. router bgp autonomous-system-number
  13. neighbor address route-map map-name in

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:


Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

router bgp autonomous-system-number

Example:


Device(config)# router bgp 2000

Configures a BGP routing process.

Step 4

neighbor {ipv4-address | ipv6-address } remote-as number

Example:


Device(config-router)# neighbor 2001:db8:4::1 remote-as 1000

Configures the autonomous system (AS) to which the neighbor belongs.

Step 5

neighbor {ipv4-address | ipv6-address } activate

Example:


Device(config-router)# neighbor 2001:db8:4::1 activate

Activates the neighbor.

Step 6

neighbor {ipv4-address | ipv6-address } send-community

Example:


Device(config-router)# neighbor 2001:db8:4::1 send-community

Enables BGP community exchange with the neighbor.

Step 7

exit

Example:


Device(config-router)# exit

Exits router configuration mode.

Step 8

route-map map-tag [permit | deny ] [sequence-number ]

Example:


Device(config)# route-map RM_GSHUT deny 10

Configures a route map to permit or deny routes for policy routing.

Step 9

match community {standard-list-number | expanded-list-number | community-list-name [exact ]}

Example:


Device(config-route-map)# match community GSHUT

Configures that the routes that match ip community-list GSHUT will be policy routed.

Step 10

exit

Example:


Device(config-route-map)# exit

Exits route-map configuration mode.

Step 11

ip community-list {standard | standard list-name} {deny | permit } gshut

Example:


Device(config)# ip community-list standard GSHUT permit gshut

Configures a community list and permits or denies routes that have the GSHUT community to the community list.

  • If you specify other communities in the same statement, there is a logical AND operation and all communities in the statement must match the communities for the route in order for the statement to be processed.

Step 12

router bgp autonomous-system-number

Example:


Device(config)# router bgp 2000

Configures a BGP routing process.

Step 13

neighbor address route-map map-name in

Example:


Device(config)# neighbor 2001:db8:4::1 route-map RM_GSHUT in

Applies the route map to incoming routes from the specified neighbor.

  • In this example, the route map named RM_GSHUT denies routes from the specified neighbor that have the GSHUT community.

Configuring BGP GSHUT Enhancement

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. router bgp autonomous-system-number
  4. bgp graceful-shutdown all {neighbors | vrfs } shutdown-time {community community-value [local-preference local-pref-value] | local-preference local-pref-value [community community-value]}
  5. bgp graceful-shutdown all {neighbors | vrfs } activate
  6. end
  7. show ip bgp
  8. show running-config

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:


Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

router bgp autonomous-system-number

Example:


Device(config)# router bgp 65000

Enters router configuration mode to create or configure a BGP routing process.

Step 4

bgp graceful-shutdown all {neighbors | vrfs } shutdown-time {community community-value [local-preference local-pref-value] | local-preference local-pref-value [community community-value]}

Example:


Device(config-router)# bgp graceful-shutdown all neighbors 180 local-preference 20 community 10

Enables the BGP GSHUT enhancement feature on the device.

Step 5

bgp graceful-shutdown all {neighbors | vrfs } activate

Example:


Device(config-router)# bgp graceful-shutdown all neighbors activate

Activates graceful shutdown across all neighbors or only across VRF neighbors for BGP sessions.

Step 6

end

Example:


Device(config-router)# end

Returns to privileged EXEC mode.

Step 7

show ip bgp

Example:


Device# show ip bgp neighbors 10.2.2.2 | include shutdown

Displays entries in the BGP routing table.

Step 8

show running-config

Example:


Device# show running-config | session router bgp

Displays running configuration on the device.

Configuration Examples for BGP Graceful Shutdown

Example: Shutting Down a BGP Link Gracefully

Graceful Shutdown While Setting a Local-Preference

This example gracefully shuts down the link to the specified neighbor in 600 seconds, adds the GSHUT community to the route, and sets a local preference of 500 for the route. 


router bgp 1000
 neighbor 2001:db8:5::1 remote-as 2000
 neighbor 2001:db8:5::1 shutdown graceful 600 local-preference 500
 neighbor 2001:db8:5::1 send-community
 exit

Graceful Shutdown While Setting an Additional Community

This example gracefully shuts down the link to the specified neighbor in 600 seconds, and adds the GSHUT community and numbered community to the route. 


router bgp 1000
 neighbor 2001:db8:5::1 remote-as 2000
 neighbor 2001:db8:5::1 shutdown graceful 600 community 1400
 neighbor 2001:db8:5::1 send-community
 exit

Graceful Shutdown while Setting an Additional Community and Local-Preference

This example gracefully shuts down the link to the specified neighbor in 600 seconds, adds the GSHUT community and the numbered community to the route, and sets a local preference of 500 to the route. 


router bgp 1000
 neighbor 2001:db8:5::1 remote-as 2000
 neighbor 2001:db8:5::1 shutdown graceful 600 community 1400 local-preference 500
 neighbor 2001:db8:5::1 send-community
 exit

Example: Filtering BGP Routes Based on the GSHUT Community

In additional to being able to gracefully shut down a BGP route, another use of the GSHUT community is to configure a community list to filter routes with this community from getting into the BGP routing table.

This example illustrates how to use a community list to filter incoming BGP routes based on the GSHUT community. In this example, a route map named RM_GSHUT denies routes based on a standard community list named GSHUT. The community list contains routes with the GSHUT community. The route map is then applied to incoming routes from the neighbor at 2001:db8:4::1. 


router bgp 2000
 neighbor 2001:db8:4::1 remote-as 1000
 neighbor 2001:db8:4::1 activate
 neighbor 2001:db8:4::1 send-community
 exit
route-map RM_GSHUT deny 10
 match community GSHUT
 exit
ip community-list standard GSHUT permit gshut
router bgp 2000
 neighbor 2001:db8:4::1 route-map RM_GSHUT in

Example: BGP GSHUT Enhancement

The following example shows how to enable and activate the BGP GSHUT enhancement feature across all neighbors. In this example, the neighbors are configured to gracefully shutdown within the specified duration of 180 seconds. 


Device> enable
Device# configure terminal
Device(config)# router bgp 65000
Device(config-router)# bgp graceful-shutdown all neighbors 180 local-preference 20 community 10
Device(config-router)# bgp graceful-shutdown all neighbors activate
Device(config-router)# end

Following is sample output from the show ip bgp command, which displays the graceful shutdown time for each neighbor. In this example, there are two IPv4 neighbors configured with IP address 10.2.2.2 and 172.16.2.1 and one VRF neighbor, tagged v1, is configured with IP address 192.168.1.1. 


Device# show ip bgp neighbors 10.2.2.2 | include shutdown

Graceful Shutdown Timer running, schedule to reset the peer in 00:02:47 seconds
Graceful Shutdown Localpref set to 20
Graceful Shutdown Community set to 10

Device# show ip bgp neighbors 172.16.2.1 | include shutdown

Graceful Shutdown Timer running, schedule to reset the peer in 00:02:38 seconds
Graceful Shutdown Localpref set to 20
Graceful Shutdown Community set to 10

Device# show ip bgp vpnv4 vrf v1 neighbors 192.168.1.1 | include shutdown

Graceful Shutdown Timer running, schedule to reset the peer in 00:01:45 seconds
Graceful Shutdown Localpref set to 20
Graceful Shutdown Community set to 10

Following is sample output from the show running-config command, which displays information associated with the BGP session in router configuration mode: 


Device# show running-config | session router bgp

router bgp 65000
bgp log-neighbor-changes
bgp graceful-shutdown all neighbors 180 local-preference 20 community 10
network 10.1.1.0 mask 255.255.255.0
neighbor 10.2.2.2 remote-as 40
neighbor 10.2.2.2 shutdown
neighbor 172.16.2.1 remote-as 10
neighbor 172.16.2.1 shutdown
!
address-family vpnv4
neighbor 172.16.2.1 activate
neighbor 172.16.2.1 send-community both
exit-address-family
!
address-family ipv4 vrf v1
neighbor 192.168.1.1 remote-as 30
neighbor 192.168.1.1 shutdown
neighbor 192.168.1.1 activate
neighbor 192.168.1.1 send-community both
exit-address-family

Additional References

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

BGP commands

Cisco IOS IP Routing: BGP Command Reference

Standards and RFCs

Standard/RFC

Title

RFC 6198

Requirements for the Graceful Shutdown of BGP Sessions

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for BGP Graceful Shutdown

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for BGP Graceful Shutdown

Feature Name

Releases

Feature Information

BGP Graceful Shutdown

The BGP Graceful Shutdown feature reduces or eliminates the loss of traffic along a link being shut down for maintenance. Routers always have a valid route available during the convergence process.

The following commands were modified: ip community-list , neighbor shutdown , show ip bgp community , and show ip bgp vpnv4 .

BGP GSHUT Enhancement

The BGP Graceful Shutdown (GSHUT) Enhancement feature enables graceful shutdown of either all neighbors or only virtual routing and forwarding (VRF) neighbors across BGP sessions.

The following command was introduced: bgp graceful-shutdown all .