Sample output
for the
show ip bgp vpn4 all
update-group command
To display
information about update groups, use the
show ip bgp vpn4 all
update-group command in privileged EXEC mode.
Device> enable
Device# show ip bgp vpn4 all update-group
BGP version 4 update-group 3, external, Address Family: VPNv4 Unicast
BGP Update version : 5/0, messages 0 active RGs: 2 <<<<<<<<<<<<<<
Overrides the neighbor AS 1 with my AS before sending updates
Topology: blue, highest version: 5, tail marker: 5
Format state: Current working (OK, last not in list)
Refresh blocked (not in list, last not in list)
Update messages formatted 1, replicated 2, current 0, refresh 0, limit 1000
Number of NLRIs in the update sent: max 4, min 0
Minimum time between advertisement runs is 0 seconds
Has 2 members:
192.0.2.1 198.51.100.1
Sample output
for the
show ip bgp
vpnv4 all neighbors ip-address
command
To display
details about neighbor connections, use the
show ip bgp
vpnv4 all neighbors ip-address
command in privileged EXEC mode.
Device> enable
Device# show ip bgp vpnv4 all neighbors 209.165.200.228
BGP neighbor is 209.165.200.228, vrf vrf1, remote AS 1, external link
BGP version 4, remote router ID 209.165.201.28
BGP state = Established, up for 00:01:26
Last read 00:00:35, last write 00:00:28, hold time is 180, keepalive interval is 60 seconds
Neighbor sessions:
1 active, is not multisession capable (disabled)
Neighbor capabilities:
Route refresh: advertised and received(new)
Four-octets ASN Capability: advertised and received
Address family IPv4 Unicast: advertised and received
Enhanced Refresh Capability: advertised and received
Multisession Capability:
Stateful switchover support enabled: NO for session 1
Message statistics:
InQ depth is 0
OutQ depth is 0
Sent Rcvd
Opens: 1 1
Notifications: 0 0
Updates: 6 2
Keepalives: 3 3
Route Refresh: 0 0
Total: 12 6
Default minimum time between advertisement runs is 0 seconds
For address family: VPNv4 Unicast
Translates address family IPv4 Unicast for VRF vrf1
Session: 209.165.200.228
BGP table version 40, neighbor version 40/0
Output queue size : 0
Index 1, Advertise bit 1
1 update-group member
Overrides the neighbor AS with my AS before sending updates
Split horizon processing before sending updates
Slow-peer detection is disabled
Slow-peer split-update-group dynamic is disabled
Sent Rcvd
Prefix activity: ---- ----
Prefixes Current: 10 2 (Consumes 160 bytes)
Prefixes Total: 10 2
Implicit Withdraw: 0 0
Explicit Withdraw: 0 0
Used as bestpath: n/a 2
Used as multipath: n/a 0
Outbound Inbound
Local Policy Denied Prefixes: -------- -------
Total: 0 0
Number of NLRIs in the update sent: max 5, min 0
Last detected as dynamic slow peer: never
Dynamic slow peer recovered: never
Refresh Epoch: 1
Last Sent Refresh Start-of-rib: 00:01:26
Last Sent Refresh End-of-rib: 00:01:26
Refresh-Out took 0 seconds
Last Received Refresh Start-of-rib: never
Last Received Refresh End-of-rib: never
Sent Rcvd
Refresh activity: ---- ----
Refresh Start-of-RIB 1 0
Refresh End-of-RIB 1 0
Address tracking is enabled, the RIB does have a route to 209.165.200.228
Connections established 3; dropped 2
Last reset 00:01:35, due to split-horizon config change of session 1
Transport(tcp) path-mtu-discovery is enabled
Graceful-Restart is disabled
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Connection is ECN Disabled
Mininum incoming TTL 0, Outgoing TTL 1
Local host: 209.165.200.225, Local port: 22789
Foreign host: 209.165.200.228, Foreign port: 179
Connection tableid (VRF): 2
Sample output
for the
show ip bgp
vpnv4 all neighbors ip-address policy
command
To display
neighbor policies per address-family, use the
show ip bgp
vpnv4 all neighbors ip-address policy
command in privileged EXEC mode.
Device> enable
Device# show ip bgp vpnv4 all neighbors 209.165.200.228
Neighbor: 209.165.200.228, Address-Family: VPNv4 Unicast (vrf1)
Locally configured policies:
as-override split-horizon