- Configuring Enhanced Object Tracking
- Configuring IP Services
- Configuring IPv4 Broadcast Packet Handling
- Configuring TCP
- Configuring UDP Forwarding Support for IP Redundancy Virtual Router Groups
- Configuring WCCP
- Object Tracking: IPv6 Route Tracking
- IPv6 Static Route Support for Object Tracking
- Stream Control Transmission Protocol
- WCCP—Configurable Router ID
- WCCP—Fast Timers
- WCCPv2—IPv6 Support
- Finding Feature Information
- Information About IPv6 Static Route Support for Object Tracking
- How to Configure IPv6 Static Route Support for Object Tracking
- Configuration Examples for IPv6 Static Route Support for Object Tracking
- Additional References for IPv6 Static Route Support for Object Tracking
- Feature Information for IPv6 Static Route Support for Object Tracking
IPv6 Static Route Support for Object Tracking
The IPv6 Static Route Support for Object Tracking feature allows an IPv6 Static Route to be associated with a tracked-object.
- Finding Feature Information
- Information About IPv6 Static Route Support for Object Tracking
- How to Configure IPv6 Static Route Support for Object Tracking
- Configuration Examples for IPv6 Static Route Support for Object Tracking
- Additional References for IPv6 Static Route Support for Object Tracking
- Feature Information for IPv6 Static Route Support for Object Tracking
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information About IPv6 Static Route Support for Object Tracking
IPv6 Static Route Support for Object Tracking
The ipv6 route command will allow an IPv6 static route to be associated with a tracked-object.
Routing Table Insertion
An IPv6 static route associated with a tracked-object is inserted into the IPv6 routing table if the state of the tracked-object is up and if all other routing-table-insertion criteria are met.
Routing Table Insertion Criteria
An IPv6 static route may be inserted into the IPv6 routing table if the following insertion criteria are met:
- Interface is up.
- Next-hop address is not the device's own address.
- Next-hop address is in scope.
- Next-hop address is resolved.
- Bidirectional Forwarding
Detection (BFD) session is up, if the BFD tracking is configured.
Note
An IPv6 static route may be associated with both a tracked object and a BFD session. Both tracked object and BFD session state must be up before the IPv6 static route is inserted in the routing table. - Tracked object state is up.
An IPv6 static route resident in the routing table is removed if any of the insertion criteria becomes false.
How to Configure IPv6 Static Route Support for Object Tracking
Configuring the IPv6 Static Routing Support for Object Tracking
1.
enable
2.
configure
terminal
3.
ipv6 route
{vrf
table-name-id
ipv6-prefix
interface
interface number
[admin-distance
object-number
|
ipv6-adress
object-number
|
multicast
object-number
|
name
object-number
|
nexthop-vrf
object-number
|
tag
object-number
|
track
object-number
|
unicastobject-number
]}
4.
end
5.
show
track object-number
DETAILED STEPS
Configuration Examples for IPv6 Static Route Support for Object Tracking
Example: IPv6 Static Route Object Tracking
The following example shows how to configure tracking for IPv6 static route for object tracking:
Device> enable Device# configure terminal Device(config)# ipv6 route vrf 0x0 2001:DB8:1:2::/64 fastEthernet0/0 2001:DB8:3:4::1 track 42 Device(config)# end
Additional References for IPv6 Static Route Support for Object Tracking
Related Documents
Related Topic |
Document Title |
---|---|
Cisco IOS commands |
|
Object tracking |
Configuring Enhanced Object Tracking |
IP Application Services commands |
Technical Assistance
Description | Link |
---|---|
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for IPv6 Static Route Support for Object Tracking
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Feature Name |
Releases |
Feature Information |
---|---|---|
IPv6 Static Route Support for Object Tracking |
Cisco IOS Release 15.2(2)E |
This feature expands Enhanced Object Tracking (EOT) functionality to allow the object tracking for IPv6 static routes.
In Cisco IOS 15.2(2)E, this feature is supported on the following platforms: |