New and Changed Information

New and Changed Information

Table 1. New and Changed Features

Feature

Description

Changed in Release

Where Documented

ECMP Dynamic Load Balancing (DLB)

Provides for Layer 3 ECMP dynamic load balancing based on current load on the link

10.5(1)F

Dynamic Load Balancing

ECMP Dynamic Load Balancing Static Pinning

Support static-pinning where a source port can be pinned to a destination port which is part of a DLB Enabled ECMP Group. All the traffic from this source port will be sent to the pinned destination port.

10.5(1)F

Dynamic Load Balancing

Exclude-L3-Proto in ECMP hashing

Added the exclude-l3-proto option to the ip load-sharing address command to allow the exclusion of the IP protocol from ECMP hashing during next-hop selection on Cisco Nexus 9300-GX2 Series switches.

10.5(1)F

Configuring Load Sharing in the Unicast FIB

Detailed information added in show commands for routes advertised to or received from a specific neighbor.

Added the detail to the show bgp {ipv4 | ipv6} neighbors {<ip-address> | <ipv6-prefix>} routes {advertised | received} [vrf <vrf-name>] detailed information of all routes advertised to or received from a specific neighbor.

10.5(1)F

Configuring Basic BGP

Unequal Cost Multi Path Load balancing with BGP Link bandwidth Extended Community attribute

Added new features to support Unequal Cost Multi Path Load balancing with BGP Link bandwidth Extended Community attribute.

10.5(1)F

DMZ Link Bandwidth