オンライン診断のスケジューリング
ユーザーは、指定時刻、毎日、毎週、または毎月、特定のルータに対してオンライン診断をスケジューリングすることができます。スケジューリングを削除するには、コマンドの no 形式を入力します。
設定方法については、設定例のセクションを参照してください。
この製品のドキュメントセットは、偏向のない言語を使用するように配慮されています。このドキュメントセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブ ランゲージの取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
オンライン診断機能には、さまざまなハードウェアコンポーネントをチェックし、ソフトウェアプロセスとインターフェイスを検証するテストが含まれています。
ユーザーは、指定時刻、毎日、毎週、または毎月、特定のルータに対してオンライン診断をスケジューリングすることができます。スケジューリングを削除するには、コマンドの no 形式を入力します。
設定方法については、設定例のセクションを参照してください。
ルータが稼働中のネットワークに接続している間に、指定したルータでヘルスモニタリング診断テストを設定できます。ユーザは、ヘルスモニタリングテストの実行間隔、テストに失敗した場合にシステム メッセージが生成されるかどうか、または、個々のテストをイネーブルまたはディセーブルにするかを、設定できます。テストをディセーブルにするには、コマンドの no 形式を入力します。
ヘルスモニタリング診断の設定方法については、「ヘルスモニタリング診断の例」のセクションを参照してください。
diagnostic monitor slot slot num test test num
diagnostic monitor syslog
diagnostic monitor threshold slot slot num test test num failure count threshold value
diagnostic schedule slot slot num/all test test num
diagnostic event-log size size value
diagnostic monitor interval slot slot num test test num interval
diagnostic start slot slot num test test num
diagnostic stop slot slot num test test num
clear diagnostic event-log slot slot num/all
test diagnostic simulation [failure | clear] slot slot num test test id
diagnostic start subslot slot num>/<bay num test test num
diagnostic stop subslot <slot num>/<bay num> test test num
test diagnostic simulation [failure | clear] subslot <slot num>/<bay num> test test id
show diagnostic bootup level
show diagnostic slot slot num/all
show diagnostic schedule slot slot num/all
show diagnostic result slot slot num/all
show diagnostic result slot slot num/all detail
show diagnostic events slot slot num/all
show diagnostic content slot slot num/all
show diagnostic description slot slot num/all
show diagnostic status
show diagnostic ondemand test-parameter slot slot num test testid
show diagnostic simulation failure slot slot num
show diagnostic subslot slot num/bay num
show diagnostic schedule subslot slot num/bay num
show diagnostic result subslot slot num/bay num
show diagnostic result subslot slot num/bay num detail
show diagnostic events subslot slot num/bay num
show diagnostic content subslot slot num/bay num
show diagnostic description subslot slot num/bay num
show diagnostic content subslot slot num/bay num
show diagnostic ondemand test-parameter subslot slot num/bay num test testid
show diagnostic simulation failure subslot slot num>/bay num
Router#show diagnostic slot 1
Current bootup diagnostic level: minimal
slot 1: ASR1000-MIP100 SerialNo : JAE210500MM
Overall Diagnostic Result for slot 1 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) Np5cHeartbeatTest ---------------> .
2) AstroIlkTest --------------------> .
3) LCFpgaScratchTest ---------------> .
4) CCEOBCLinkStateTest -------------> .
slot 1: ASR1000-MIP100 SerialNo : JAE18160AM6
Overall Diagnostic Result for slot 1 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) EPAFpgaScratchTest --------------> .
2) EPAStatusTest -------------------> .
3) EPAHostPrbsStausTest ------------> .
4) EPAXcvrTest:
Port 0 1 2 3 4 5 6 7 8 9
----------------------------------
U U U U U U U U U U
Router#show diagnostic subslot 1/1
Current bootup diagnostic level: minimal
subslot 1/1: EPA-10X10GE SerialNo : JAE18160AM6
Overall Diagnostic Result for subslot 1/1 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) EPAFpgaScratchTest --------------> .
2) EPAStatusTest -------------------> .
3) EPAHostPrbsStausTest ------------> .
4) EPAXcvrTest:
Port 0 1 2 3 4 5 6 7 8 9
----------------------------------
U U U U U U U U U U
Router#show diagnostic subslot 1/1 detail
Current bootup diagnostic level: minimal
subslot 1/1: EPA-10X10GE SerialNo : JAE18160AM6
Overall Diagnostic Result for subslot 1/1 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________
1) EPAFpgaScratchTest --------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Mar 05 2019 14:17:05
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Mar 05 2019 14:17:05
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
2) EPAStatusTest -------------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Mar 05 2019 14:17:05
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Mar 05 2019 14:17:05
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
3) EPAHostPrbsStausTest ------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Mar 05 2019 14:17:05
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Mar 05 2019 14:17:05
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
4) EPAXcvrTest:
Port 0 1 2 3 4 5 6 7 8 9
----------------------------------
U U U U U U U U U U
Error code ------------------> 1 (DIAG_FAILURE)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Mar 05 2019 14:17:05
First test failure time -----> Mar 05 2019 14:17:05
Last test failure time ------> Mar 05 2019 14:17:05
Last test pass time ---------> n/a
Total failure count ---------> 1
Consecutive failure count ---> 1
___________________________________________________________________
Slot command example :
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#diagnostic monitor slot 2 test ?
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) Np5cHeartbeatTest ---------------> *B*N****I 000 00:00:05.00 n/a
2) AstroIlkTest --------------------> *B*N****I 000 00:01:00.00 n/a
3) LCFpgaScratchTest ---------------> *B*N****I 000 00:02:00.00 n/a
4) CCEOBCLinkStateTest -------------> *B*N****I 000 00:01:00.00 n/a
WORD Test ID list (e.g. 1,3-6) or Test Name
all Select all test ID
Router(config)#
Router(config)#diagnostic monitor slot 2 test all
Router(config)#end
Router#show ru
*Aug 2 06:12:19.254: %SYS-5-CONFIG_I: Configured from console by consolen
Router#show run | sec diagnostic monitor
diagnostic monitor slot 2 test Np5cHeartbeatTest cardindex 4
diagnostic monitor slot 2 test AstroIlkTest cardindex 4
diagnostic monitor slot 2 test LCFpgaScratchTest cardindex 4
diagnostic monitor slot 2 test CCEOBCLinkStateTest cardindex 4
Router#
Router#show diagnostic content slot 2
slot 2: ASR1000-MIP100
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) Np5cHeartbeatTest ---------------> *B*N****A 000 00:00:05.00 n/a
2) AstroIlkTest --------------------> *B*N****A 000 00:01:00.00 n/a
3) LCFpgaScratchTest ---------------> *B*N****A 000 00:02:00.00 n/a
4) CCEOBCLinkStateTest -------------> *B*N****A 000 00:01:00.00 n/a
Router#show diagnostic result slot 2
Current bootup diagnostic level: minimal
slot 2: ASR1000-MIP100 SerialNo : JAE210500MM
Overall Diagnostic Result for slot 2 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) Np5cHeartbeatTest ---------------> .
2) AstroIlkTest --------------------> .
3) LCFpgaScratchTest ---------------> .
4) CCEOBCLinkStateTest -------------> .
Router#
Subslot :
Router#show diagnostic content subslot 1/0
subslot 1/0: EPA-2X40GE
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) EPAFpgaScratchTest --------------> *B*N****I 000 00:01:00.00 n/a
2) EPAStatusTest -------------------> *B*N****I 000 00:01:00.00 n/a
3) EPAHostPrbsStausTest ------------> *B*N****I not configured n/a
4) EPAXcvrTest ---------------------> *BPN*X**I not configured n/a
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#diagno
Router(config)#diagnostic mon
Router(config)#diagnostic monitor sub
Router(config)#diagnostic monitor subslot 1/0 ?
test Diagnostic test selection
Router(config)#diagnostic monitor subslot 1/0 te
Router(config)#diagnostic monitor subslot 1/0 test ?
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) EPAFpgaScratchTest --------------> *B*N****I 000 00:01:00.00 n/a
2) EPAStatusTest -------------------> *B*N****I 000 00:01:00.00 n/a
3) EPAHostPrbsStausTest ------------> *B*N****I not configured n/a
4) EPAXcvrTest ---------------------> *BPN*X**I not configured n/a
WORD Test ID list (e.g. 1,3-6) or Test Name
all Select all test ID
Router(config)#diagnostic monitor subslot 1/0 test 1
Router(config)#end
Router#sho
*Aug 2 06:29:41.321: %SYS-5-CONFIG_I: Configured from console by consolew ru
Router#show running-config | sec diagnostic monitor subslot
diagnostic monitor subslot 1/0 test EPAFpgaScratchTest cardindex 5
Router#
Router#
*Aug 2 06:30:07.735: %LINK-3-UPDOWN: Interface FortyGigabitEthernet1/0/1, changed state to up
*Aug 2 06:30:07.734: %LINK-3-UPDOWN: SIP1/0: Interface FortyGigabitEthernet1/0/1, changed state to up
*Aug 2 06:30:08.735: %LINEPROTO-5-UPDOWN: Line protocol on Interface FortyGigabitEthernet1/0/1, changed state to up
Router#
Router#
Router#show diagnostic content subslot 1/0
subslot 1/0: EPA-2X40GE
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) EPAFpgaScratchTest --------------> *B*N****A 000 00:01:00.00 n/a
2) EPAStatusTest -------------------> *B*N****I 000 00:01:00.00 n/a
3) EPAHostPrbsStausTest ------------> *B*N****I not configured n/a
4) EPAXcvrTest ---------------------> *BPN*X**I not configured n/a
Router#
Slot related show commands:
===========================
Router#show diagnostic slot 0
Current bootup diagnostic level: minimal
slot 0: ASR1000-MIP100 SerialNo : JAE20400315
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) Np5cHeartbeatTest ---------------> .
2) AstroIlkTest --------------------> .
3) LCFpgaScratchTest ---------------> .
4) CCEOBCLinkStateTest -------------> .
slot 0: ASR1000-MIP100 SerialNo : JAE214006W6
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) EPAFpgaScratchTest --------------> .
2) EPAStatusTest -------------------> .
3) EPAHostPrbsStausTest ------------> .
4) EPAXcvrTest:
Port 0
-------
U
slot 0: ASR1000-MIP100 SerialNo : JAE214006VX
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) EPAFpgaScratchTest --------------> .
2) EPAStatusTest -------------------> .
3) EPAHostPrbsStausTest ------------> .
4) EPAXcvrTest:
Port 0
-------
.
Router#show diagnostic result slot 0
Current bootup diagnostic level: minimal
slot 0: ASR1000-MIP100 SerialNo : JAE20400315
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) Np5cHeartbeatTest ---------------> .
2) AstroIlkTest --------------------> .
3) LCFpgaScratchTest ---------------> .
4) CCEOBCLinkStateTest -------------> .
Router#show diagnostic result slot 0 detail
Current bootup diagnostic level: minimal
slot 0: ASR1000-MIP100 SerialNo : JAE20400315
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________________
1) Np5cHeartbeatTest ---------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
2) AstroIlkTest --------------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
3) LCFpgaScratchTest ---------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
4) CCEOBCLinkStateTest -------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
Router#
Router#show diagnostic slot 0 detail
Current bootup diagnostic level: minimal
slot 0: ASR1000-MIP100 SerialNo : JAE20400315
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________
1) Np5cHeartbeatTest ---------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
2) AstroIlkTest --------------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
3) LCFpgaScratchTest ---------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
4) CCEOBCLinkStateTest -------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 2
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:25
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:25
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
slot 0: ASR1000-MIP100 SerialNo : JAE214006W6
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________
1) EPAFpgaScratchTest --------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:45
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:45
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
2) EPAStatusTest -------------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:45
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:45
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
3) EPAHostPrbsStausTest ------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:45
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:49:45
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
4) EPAXcvrTest:
Port 0
-------
U
Error code ------------------> 1 (DIAG_FAILURE)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:49:45
First test failure time -----> Jul 22 2019 04:49:45
Last test failure time ------> Jul 22 2019 04:49:45
Last test pass time ---------> n/a
Total failure count ---------> 1
Consecutive failure count ---> 1
___________________________________________________________________
slot 0: ASR1000-MIP100 SerialNo : JAE214006VX
Overall Diagnostic Result for slot 0 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________
1) EPAFpgaScratchTest --------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
2) EPAStatusTest -------------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
3) EPAHostPrbsStausTest ------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
4) EPAXcvrTest:
Port 0
-------
.
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
Router#
Router#show diagnostic content slot 0
slot 0: ASR1000-MIP100
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) Np5cHeartbeatTest ---------------> *B*N****I 000 00:00:05.00 n/a
2) AstroIlkTest --------------------> *B*N****I 000 00:01:00.00 n/a
3) LCFpgaScratchTest ---------------> *B*N****I 000 00:02:00.00 n/a
4) CCEOBCLinkStateTest -------------> *B*N****I 000 00:01:00.00 n/a
Router#
Router#show diagnostic description slot 0 test all
Np5cHeartbeatTest :
It Checks the ezman process heatbeat miss.
AstroIlkTest :
It tests astro interlaken status and reports failures if not ok
LCFpgaScratchTest :
It checks Read and Write operation of ELC's FPGA
CCEOBCLinkStateTest :
It Checks EOBC link status of LC card.
Router#
Router#show diagnostic events slot 0
Diagnostic events (storage for 500 events, 26 events recorded)
Number of events matching above criteria = 8
Event Type (ET): I - Info, W - Warning, E - Error
Time Stamp ET [Card] Event Message
------------------ -- ------ --------------------------------------------------
07/22 04:48:23.878 I [0] Np5cHeartbeatTest Passed
07/22 04:48:23.880 I [0] AstroIlkTest Passed
07/22 04:48:23.882 I [0] LCFpgaScratchTest Passed
07/22 04:48:23.886 I [0] CCEOBCLinkStateTest Passed
07/22 04:49:25.297 I [0] Np5cHeartbeatTest Passed
07/22 04:49:25.298 I [0] AstroIlkTest Passed
07/22 04:49:25.300 I [0] LCFpgaScratchTest Passed
07/22 04:49:25.302 I [0] CCEOBCLinkStateTest Passed
Router#
Router#show diagnostic simulation failure slot 0
slot 0:
There is no test failure simulation installed.
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#do show clock
*05:43:47.385 UTC Mon Jul 22 2019
Router(config)#diagnostic schedule slot 0 test all on jul 22 2019 05:45
Router(config)#end
Router#
Router#show run | sec diagnostic
diagnostic schedule slot 0 test all on July 22 2019 5:45 cardindex 4 jobindex 1
diagnostic bootup level minimal
Router#
Router#
Router#show diagnostic schedule slot 0
Current Time = 05:44:35 UTC Mon Jul 22 2019
Diagnostic for slot 0:
Schedule #1:
To be run on July 22 2019 5:45
Test ID(s) to be executed: all.
Router#
*Jul 22 05:44:59.720: %DIAG-6-SCHED_RUNNING: slot 0: Performing Scheduled Online Diagnostic...
*Jul 22 05:44:59.720: %DIAG-6-TEST_RUNNING: slot 0: Running Np5cHeartbeatTest{ID=1} ...
*Jul 22 05:44:59.721: %DIAG-6-TEST_OK: slot 0: Np5cHeartbeatTest{ID=1} has completed successfully
*Jul 22 05:44:59.721: %DIAG-6-TEST_RUNNING: slot 0: Running AstroIlkTest{ID=2} ...
*Jul 22 05:44:59.722: %DIAG-6-TEST_OK: slot 0: AstroIlkTest{ID=2} has completed successfully
*Jul 22 05:44:59.722: %DIAG-6-TEST_RUNNING: slot 0: Running LCFpgaScratchTest{ID=3} ...
*Jul 22 05:44:59.724: %DIAG-6-TEST_OK: slot 0: LCFpgaScratchTest{ID=3} has completed successfully
*Jul 22 05:44:59.724: %DIAG-6-TEST_RUNNING: slot 0: Running CCEOBCLinkStateTest{ID=4} ...
*Jul 22 05:44:59.726: %DIAG-6-TEST_OK: slot 0: CCEOBCLinkStateTest{ID=4} has completed successfully
*Jul 22 05:44:59.726: %DIAG-6-SCHED_COMPLETE: slot 0: Scheduled Online Diagnostic is completed
Router#
Router#show diagnostic schedule slot 0
Current Time = 05:45:07 UTC Mon Jul 22 2019
Diagnostic for slot 0 is not scheduled.
Router#
subslot level commands
===============================================
Router#show diagnostic result subslot 0/1
Current bootup diagnostic level: minimal
subslot 0/1: EPA-QSFP-1X100GE SerialNo : JAE214006VX
Overall Diagnostic Result for subslot 0/1 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) EPAFpgaScratchTest --------------> .
2) EPAStatusTest -------------------> .
3) EPAHostPrbsStausTest ------------> .
4) EPAXcvrTest:
Port 0
-------
.
Router#show diagnostic result subslot 0/1 detail
Current bootup diagnostic level: minimal
subslot 0/1: EPA-QSFP-1X100GE SerialNo : JAE214006VX
Overall Diagnostic Result for subslot 0/1 : PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________
1) EPAFpgaScratchTest --------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
2) EPAStatusTest -------------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
3) EPAHostPrbsStausTest ------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:50:03
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:50:03
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
4) EPAXcvrTest:
Port 0
-------
.
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 3
Last test testing type ------> OnDemand
Last test execution time ----> Jul 22 2019 04:57:24
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jul 22 2019 04:57:24
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________
Router#
Router#show diagnostic content subslot 0/1
subslot 0/1: EPA-QSFP-1X100GE
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) EPAFpgaScratchTest --------------> *B*N****I 000 00:01:00.00 n/a
2) EPAStatusTest -------------------> *B*N****I 000 00:01:00.00 n/a
3) EPAHostPrbsStausTest ------------> *B*N****I not configured n/a
4) EPAXcvrTest ---------------------> *BPN*X**I not configured n/a
Router#
Router#show diagnostic description subslot 0/1 test all
EPAFpgaScratchTest :
it tests read and write operation of EPAs FPGA scratpad resigter
EPAStatusTest :
It tests EPA boot staus.
EPAHostPrbsStausTest :
It tests mac and EPA phy serdes line auto tune status
EPAXcvrTest :
It tests EPA xcvr staus
Router#
Router#show diagnostic events subslot 0/1 all
Diagnostic events (storage for 500 events, 26 events recorded)
Number of events matching above criteria = 9
Event Type (ET): I - Info, W - Warning, E - Error
Time Stamp ET [Card] Event Message
------------------ -- ------ --------------------------------------------------
07/22 04:50:03.787 I [0/1] EPAFpgaScratchTest Passed
07/22 04:50:03.788 I [0/1] EPAStatusTest Passed
07/22 04:50:03.789 I [0/1] EPAHostPrbsStausTest Passed
07/22 04:50:03.811 I [0/1] EPAXcvrTest Passed
07/22 04:57:19.719 I [0/1] EPAXcvrTest Passed
07/22 04:57:24.616 I [0/1] EPAXcvrTest Passed
07/22 05:00:01.333 I [0/1] EPAXcvrTest Passed
07/22 05:00:06.980 I [0/1] EPAXcvrTest Passed
07/22 05:00:31.421 I [0/1] EPAXcvrTest Passed
Router#
Router#show diagnostic simulation failure subslot 0/1
subslot 0/1:
There is no test failure simulation installed.
Router#
Router#show run | sec diagnostic
diagnostic bootup level minimal
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#
Router(config)#do show clock
*05:48:15.905 UTC Mon Jul 22 2019
Router(config)#diagnostic schedule subslot 0/1 test all on jul 22 2019 05:50
Router(config)#end
Router#
*Jul 22 05:48:44.378: %SYS-5-CONFIG_I: Configured from console by consoleconf t
Router#show run | sec diagnostic
diagnostic schedule subslot 0/1 test all on July 22 2019 5:50 cardindex 5 jobindex 1
diagnostic bootup level minimal
Router#show diagnostic schedule sub
Router#show diagnostic schedule subslot 0/1
Current Time = 05:49:02 UTC Mon Jul 22 2019
Diagnostic for subslot 0/1:
Schedule #1:
To be run on July 22 2019 5:50
Test ID(s) to be executed: all.
Router#show diagnostic schedule subslot 0/1
Current Time = 05:49:14 UTC Mon Jul 22 2019
Diagnostic for subslot 0/1:
Schedule #1:
To be run on July 22 2019 5:50
Test ID(s) to be executed: all.
Router#
*Jul 22 05:49:59.832: %DIAG-6-SCHED_RUNNING: subslot 0/1: Performing Scheduled Online Diagnostic...
*Jul 22 05:49:59.832: %DIAG-6-TEST_RUNNING: subslot 0/1: Running EPAFpgaScratchTest{ID=1} ...
*Jul 22 05:49:59.833: %DIAG-6-TEST_OK: subslot 0/1: EPAFpgaScratchTest{ID=1} has completed successfully
*Jul 22 05:49:59.833: %DIAG-6-TEST_RUNNING: subslot 0/1: Running EPAStatusTest{ID=2} ...
*Jul 22 05:49:59.834: %DIAG-6-TEST_OK: subslot 0/1: EPAStatusTest{ID=2} has completed successfully
*Jul 22 05:49:59.834: %DIAG-6-TEST_RUNNING: subslot 0/1: Running EPAHostPrbsStausTest{ID=3} ...
*Jul 22 05:49:59.835: %DIAG-6-TEST_OK: subslot 0/1: EPAHostPrbsStausTest{ID=3} has completed successfully
*Jul 22 05:49:59.835: %DIAG-6-TEST_RUNNING: subslot 0/1: Running EPAXcvrTest{ID=4} ...
*Jul 22 05:49:59.857: %DIAG-6-TEST_OK: subslot 0/1: EPAXcvrTest{ID=4} has completed successfully
*Jul 22 05:49:59.857: %DIAG-6-SCHED_COMPLETE: subslot 0/1: Scheduled Online Diagnostic is completed
Router#
Router#show diagnostic schedule subslot 0/1
Current Time = 05:50:33 UTC Mon Jul 22 2019
Diagnostic for subslot 0/1 is not scheduled.
Router#