Connection and Security-Related Connection Events

The following topics describe how to use connection and security events tables.

About Connection Events

The system can generate logs of the connections its managed devices detect. These logs are called connection events. Connection events include Security-Related connection events (connections blocked by the reputation-based Security Intelligence feature.)

Connection events generally include transactions detected by:

  • Access Control policies

  • Decryption policies

  • Prefilter policies (captured by prefilter or tunnel rules)

  • DNS Block lists

  • URL Block lists

  • Network (IP address) Block lists

Settings in rules and policies give you granular control over which connections you log, when you log them, and where you store the data.

For detailed information, see Connection Logging.

Connection vs. Security-Related Connection Events

A Security-Related connection events is a connection event that is generated whenever a session is blocked or monitored by the reputation-based Security Intelligence feature.

However, for every Security-Related connection event, there is an identical connection event. You can view and analyze Security-Related connection events independently. The system also stores and prunes Security-Related connection events separately.

Note that the system enforces Security Intelligence before more resource-intensive evaluations. When a connection is blocked by Security Intelligence, the resulting event does not contain the information that the system would have gathered from subsequent evaluation, for example, user identity.


Note


In this guide, information about connection events also pertains to Security-Related connection events, unless otherwise noted.


NetFlow Connections

To supplement the connection data gathered by your managed devices, you can use records broadcast by NetFlow exporters to generate connection events. This is especially useful if the NetFlow exporters are monitoring different networks than those monitored by your managed devices.

The system logs NetFlow records as unidirectional end-of-connection events in the Secure Firewall Management Center database. The available information for these connections differs somewhat from connections detected by your access control policy; see Differences between NetFlow and Managed Device Data.

Connection Summaries (Aggregated Data for Graphs)

The system aggregates connection data collected over five-minute intervals into connection summaries, which the system uses to generate connection graphs and traffic profiles. Optionally, you can create custom workflows based on connection summary data, which you use in the same way as you use workflows based on individual connection events.

Note that there are no connection summaries specifically for Security-Related connection events, although corresponding end-of-connection events can be aggregated into connection summary data.

To be aggregated, multiple connections must:

  • represent the end of connections

  • have the same source and destination IP addresses, and use the same port on the responder (destination) host

  • use the same protocol (TCP or UDP)

  • use the same application protocol

  • either be detected by the same managed device or by the same NetFlow exporter

Each connection summary includes total traffic statistics, as well as the number of connections in the summary. Because NetFlow exporters generate unidirectional connections, a summary’s connection count is incremented by two for every connection based on NetFlow data.

Note that connection summaries do not contain all of the information associated with the summaries’ aggregated connections. For example, because client information is not used to aggregate connections into connection summaries, summaries do not contain client information.

Long-Running Connections

If a monitored session spans two or more five-minute intervals over which connection data is aggregated, the connection is considered a long-running connection. When calculating the number of connections in a connection summary, the system increments the count only for the five-minute interval in which a long-running connection was initiated.

Also, when calculating the number of packets and bytes transmitted by the initiator and responder in a long-running connection, the system does not report the number of packets and bytes that were actually transmitted during each five-minute interval. Instead, the system assumes a constant rate of transmission and calculates estimated figures based on the total number of packets and bytes transmitted, the length of the connection, and what portion of the connection occurred during each five-minute interval.

Combined Connection Summaries from External Responders

To reduce the space required to store connection data and speed up the rendering of connection graphs, the system combines connection summaries when:

  • one of the hosts involved in the connection is not on your monitored network

  • other than the IP address of the external host, the connections in the summaries meet the summary aggregation criteria

When viewing connection summaries in the Analysis > Connections submenu pages, and when working with connection graphs, the system displays external instead of an IP address for the non-monitored hosts.

As a consequence of this aggregation, if you attempt to drill down to the table view of connection data (that is, access data on individual connections) from a connection summary or graph that involves an external responder, the table view contains no information.

Connection and Security-Related Connection Event Fields


Note


You cannot use the connection/Security-Related connection events Search page to search for events associated with a connection.
Access Control Policy (Syslog: ACPolicy)

The access control policy that monitored the connection.

Access Control Rule (Syslog: AccessControlRuleName)

The access control rule or default action that handled the connection, as well as up to eight Monitor rules matched by that connection.

If the connection matched one Monitor rule, the Secure Firewall Management Center displays the name of the rule that handled the connection, followed by the Monitor rule name. If the connection matched more than one Monitor rule, the number of matching Monitor rules is displayed, for example, Default Action + 2 Monitor Rules.

To display a pop-up window with a list of the first eight Monitor rules matched by the connection, click N Monitor Rules.

Action (Syslog: AccessControlRuleAction)

The action associated with the configuration that logged the connection.

For Security Intelligence-monitored connections, the action is that of the first non-Monitor access control rule triggered by the connection, or the default action. Similarly, because traffic matching a Monitor rule is always handled by a subsequent rule or by the default action, the action associated with a connection logged due to a Monitor rule is never Monitor. However, you can still trigger correlation policy violations on connections that match Monitor rules.

Action

Description

Allow

Connections either allowed by access control explicitly, or allowed because a user bypassed an interactive block.

Block, Block with reset

Blocked connections, including:

  • tunnels and other connections blocked by the prefilter policy

  • connections blocked by Security Intelligence.

  • encrypted connections blocked by an SSL policy.

  • connections where an exploit was blocked by an intrusion policy.

  • connections where a file (including malware) was blocked by a file policy.

For connections where the system blocks an intrusion or file, system displays Block, even though you use access control Allow rules to invoke deep inspection.

Fastpath

Non-encrypted tunnels and other connections fastpathed by the prefilter policy.

Interactive Block, Interactive Block with reset

Connections logged when the system initially blocks a user’s HTTP request using an Interactive Block rule. If the user clicks through the warning page that the system displays, additional connections logged for the session have an action of Allow.

Trust

Connections trusted by access control. The system logs trusted TCP connections differently depending on the device model.

Default Action

Connections handled by the access control policy's default action.

(Blank/empty)

The connection closed before enough packets had passed to match a rule.

This can happen only if a facility other than access control, such as intrusion prevention, causes the connection to be logged.

Application Protocol (Syslog: ApplicationProtocol)

In the Secure Firewall Management Center web interface, this value constrains summaries and graphs.

The application protocol, which represents communications between hosts, detected in the connection.

Application Protocol Category and Tag

Criteria that characterize the application to help you understand the application's function.

Application Risk

The risk associated with the application traffic detected in the connection: Very High, High, Medium, Low, or Very Low. Each type of application detected in the connection has an associated risk; this field displays the highest of those.

Authentication Source

Contains one of the following values based on which type of authentication is being used:

  • Passive Identity Source for the Passive Identity Agent

  • SAML Captive Portal for the Azure AD (SAML) realm configured to be a captive portal

For more information, see the Cisco Secure Firewall Management Center Device Configuration Guide.

Business Relevance

The business relevance associated with the application traffic detected in the connection: Very High, High, Medium, Low, or Very Low. Each type of application detected in the connection has an associated business relevance; this field displays the lowest (least relevant) of those.

Client and Client Version (Syslog: Client, ClientVersion)

The client application and version of that client detected in the connection.

If the system cannot identify the specific client used in the connection, the field displays the word "client" appended to the application protocol name to provide a generic name, for example, FTP client.

Client Category and Tag

Criteria that characterize the application to help you understand the application's function.

Connection Counter (Syslog Only)

A counter that distinguishes one connection from another simultaneous connection. This field has no significance on its own.

The following fields collectively uniquely identify a connection event: DeviceUUID, First Packet Time, Connection Instance ID, and Connection Counter.

Connection Instance ID (Syslog Only)

The Snort instance that processed the connection event. This field has no significance on its own.

The following fields collectively uniquely identify a connection event: DeviceUUID, First Packet Time, Connection Instance ID, and Connection Counter.

ConnectionDuration (Syslog Only)

This field exists ONLY as a syslog field; it does not exist in the Secure Firewall Management Center web interface. (The web interface conveys this information using the First Packet and Last Packet columns.)

This field has a value only when logging occurs at the end of the connection. For a start-of-connection syslog message, this field is not output, as it is not known at that time.

For an end-of-connection syslog message, this field indicates the number of seconds between the first packet and the last packet, which may be zero for a short connection. For example, if the timestamp of the syslog is 12:34:56 and the ConnectionDuration is 5, then the first packet was seen at 12:34:51.

Connections

The number of connections in a connection summary. For long-running connections, that is, connections that span multiple connection summary intervals, only the first connection summary interval is incremented. To view meaningful results for searches using the Connections criterion, use a custom workflow that has a connection summary page.

Count

The number of connections that match the information that appears in each row. Note that the Count field appears only after you apply a constraint that creates two or more identical rows. If you create a custom workflow and do not add the Count column to a drill-down page, each connection is listed individually and packets and bytes are not summed.

Decrypt Peer

The IP address of the VPN peer (peer’s IKE address) which decrypts the packet for the associated connection.

You must enable logging setting for access control policy rule to log at the beginning of connection and end of connection to view the VPN peer IP address. If you enable the bypass Access Control Policy for decrypted traffic (sysopt connection permit-vpn) option, you cannot view details for decrypted traffic.

Detection Type (Syslog: DetectionType)

This field shows the source of detection of a client application. It can be AppID or Encrypted Visibility.

Destination Port/ICMP Code (Syslog: Separate fields - DstPort, ICMPCode)

In the Secure Firewall Management Center web interface, these values constrain summaries and graphs.

The port or ICMP code used by the session responder.

DestinationSecurityGroup (Syslog Only)

This field holds the text value associated with the numeric value in DestinationSecurityGroupTag, if available. If the group name is not available as a text value, then this field contains the same integer value as the DestinationSecurityGroupTag field.

DestinationSecurityGroupType (Syslog Only)

This field displays the source from which a security group tag was obtained.

Value

Description

Inline

Destination SGT value is from packet

Session Directory

Destination SGT value is from ISE via session directory topic

SXP

Destination SGT value is from ISE via SXP topic

Destination SGT (Syslog: DestinationSecurityGroupTag)

The numeric Security Group Tag (SGT) attribute of the destination involved in the connection.

The Destination SGT value is obtained from the source specified in the DestinationSecurityGroupType field.

Detection Type

This field shows the source of detection of a client.

Device

In the Secure Firewall Management Center web interface, this value constrains summaries and graphs.

The managed device that detected the connection or, for connections generated from NetFlow data, the managed device that processed the data.

DeviceUUID (Syslog Only)

The unique identifier of the firewall device that generated an event.

The following fields collectively uniquely identify a connection event: DeviceUUID, First Packet Time, Connection Instance ID, and Connection Counter.

DNS Query (Syslog: DNSQuery)

The DNS query submitted in a connection to the name server to look up a domain name.

This field can also hold the domain name for URL filtering matches when DNS filtering is enabled. In this case, the URL field will be blank and the URL Category and URL Reputation fields contain the values associated with the domain.

For more information about DNS filtering, see DNS Filtering: Identify URL Reputation and Category During DNS Lookup.

DNS Record Type (Syslog: DNSRecordType)

The type of the DNS resource record used to resolve a DNS query submitted in a connection.

DNS Response (Syslog: DNSResponseType)

The DNS response returned in a connection to the name server when queried.

DNS Sinkhole Name (Syslog: DNS_Sinkhole)

The name of the sinkhole server where the system redirected a connection.

DNS TTL (Syslog: DNS_TTL)

The number of seconds a DNS server caches the DNS resource record.

Domain

The domain of the managed device that detected the connection or, for connections generated from NetFlow data, the domain of the managed device that processed the data. This field is only present if you have ever configured the management center for multitenancy.

Encrypt Peer

The IP address of the VPN peer (peer’s IKE address) which encrypts the packet for the associated connection.

You must enable logging setting for access control policy rule to log at the beginning of connection and end of connection to view the VPN peer IP address.

Encrypted Visibility Fingerprint (Syslog: EncryptedVisibilityFingerprint)

The TLS fingerprint detected by the Encrypted Visibility Engine (EVE) for the session.

Encrypted Visibility Process Name (Syslog: EncryptedVisibilityProcessName)

Process or client in the TLS client hello packet that was analyzed by the Encrypted Visibility Engine (EVE).

Encrypted Visibility Confidence Score (Syslog: EncryptedVisibilityConfidenceScore)

The confidence value in the range 0-100% that the encrypted visibility engine has detected the right process. For example, if the process name is Firefox and if the confidence score is 80%, it means that the engine is 80% confident that the process it has detected is Firefox.

Encrypted Visibility Threat Confidence (Syslog: EncryptedVisibilityThreatConfidence)

The probability level that the process detected by the encrypted visibility engine contains threat. This field indicates the bands (Very High, High, Medium, Low, or Very Low) based on the value in the threat confidence score.

Encrypted Visibility Threat Confidence Score (Syslog: EncryptedVisibilityThreatConfidenceScore)

The confidence value in the range 0-100% that the process detected by the encrypted visibility engine contains threat. If the threat confidence score is very high, say 90%, then the Encrypted Visibility Process Name field displays "Malware."

Endpoint Location

The IP address of the network device that used ISE to authenticate the user, as identified by ISE.

Endpoint Profile (Syslog: Endpoint Profile)

The user's endpoint device type, as identified by ISE.

Event Priority (Syslog Only)

Whether or not the connection event is a high priority event. High priority events are connection events that are associated with an intrusion, Security Intelligence, file, or malware event. All other events are Low priority.

Files (Syslog: FileCount)

The number of files (including malware files) detected or blocked in a connection associated with one or more file events.

In the Secure Firewall Management Center web interface, the View Files icon links to a list of files. The number on the icon indicates the number of files (including malware files) detected or blocked in that connection.

First Packet or Last Packet (Syslog: See the ConnectionDuration field)

The date and time the first or last packet of the session was seen.

First Packet Time (Syslog Only)

The time the system encountered the first packet.

The following fields collectively uniquely identify a connection event: DeviceUUID, First Packet Time, Connection Instance ID, and Connection Counter.

HTTP Referrer (Syslog: HTTPReferer)

The HTTP referrer, which represents the referrer of a requested URL for HTTP traffic detected in the connection (such as a website that provided a link to, or imported a link from, another URL).

HTTP Response Code (Syslog: HTTPResponse)

The HTTP status code sent in response to a client's HTTP request over a connection.

Ingress/Egress Interface (Syslog: IngressInterface, EgressInterface)

The ingress or egress interface associated with the connection. If your deployment includes an asymmetric routing configuration, the ingress and egress interface may not belong to the same inline pair.

Ingress/Egress Security Zone (Syslog: IngressZone, EgressZone)

The ingress or egress security zone associated with the connection.

For rezoned encapsulated connections, the ingress field displays the tunnel zone you assigned, instead of the original ingress security zone. The egress field is blank.

Ingress Virtual Router/Egress Virtual Router (Syslog: IngressVRF, EgressVRF)

In networks using virtual routing, the names of the virtual routers through which traffic entered and exited the network.

Initiator/Responder Bytes (Syslog: InitiatorBytes, ResponderBytes)

The total number of bytes transmitted by the session initiator or received by the session responder.

Initiator/Responder Continent

When a routable IP is detected, the continent associated with the IP address for the session initiator or responder.

Initiator/Responder Country

When a routable IP is detected, the country associated with the IP address of the session initiator or responder. The system displays an icon of the country’s flag, and the country’s ISO 3166-1 alpha-3 country code. Hover your pointer over the flag icon to view the country’s full name.

Initiator/Responder IP (Syslog: SrcIP, DstIP)

In the Secure Firewall Management Center web interface, these values constrain summaries and graphs.

The IP address (and host name, if DNS resolution is enabled) of the session initiator or responder.

See also A Note About Initiator/Responder, Source/Destination, and Sender/Receiver Fields.

In the Secure Firewall Management Center web interface, the host icon identifies the IP address that caused the connection to be blocked.

For plaintext, passthrough tunnels either blocked or fastpathed by the prefilter policy, initiator and responder IP addresses represent the tunnel endpoints—the routed interfaces of the network devices on either side of the tunnel.

Initiator/Responder Packets (Syslog: InitiatorPackets, ResponderPackets)

The total number of packets transmitted by the session initiator or received by the session responder.

Initiator User (Syslog: User)

In the Secure Firewall Management Center web interface, this value constrains summaries and graphs.

The user logged into the session initiator. If this field is populated with No Authentication, the user traffic:

  • matched an access control policy without an associated identity policy

  • did not match any rules in the identity policy

If applicable, the username is preceded by <realm>\.

See also A Note About Initiator/Responder, Source/Destination, and Sender/Receiver Fields.

Intrusion Events (Syslog: IPSCount)

The number of intrusion events, if any, associated with the connection.

In the Secure Firewall Management Center web interface, the View Intrusion Events icon links to a list of events.

IOC

Whether the event triggered an indication of compromise (IOC) against a host involved in the connection.

MITRE ATT&CK

Progression graph for viewing the progress of an attack in the ATT&CK framework at any given time during an event. Supports an expanded view in a new pane, detailing MITRE tactics, techniques, and progression graphs.

  • Click the progression graph to see the details of the MITRE ATT&CK for an event. The MITRE ATT&CK window shows the tactic, technique, subtechnique, and the link to the MITRE page.

  • In the window showing the details, click Details to view the general description of the technique.

NAT Source/Destination IP (Syslog: NAT_InitiatorIP, NAT_ResponderIP)

The NAT translated IP address of the session initiator or responder.

NAT Source/Destination Port (Syslog: NAT_InitiatorPort, NAT_ResponderPort)

The NAT translated port of the session initiator or responder.

NetBIOS Domain (Syslog: NetBIOSDomain)

The NetBIOS domain used in the session.

NetFlow SNMP Input/Output

For connections generated from NetFlow data, the interface index for the interface where connection traffic entered or exited the NetFlow exporter.

NetFlow Source/Destination Autonomous System

For connections generated from NetFlow data, the border gateway protocol autonomous system number for the source or destination of traffic in the connection.

NetFlow Source/Destination Prefix

For connections generated from NetFlow data, the source or destination IP address ANDed with the source or destination prefix mask.

NetFlow Source/Destination TOS

For connections generated from NetFlow data, the setting for the type-of-service (TOS) byte when connection traffic entered or exited the NetFlow exporter.

Network Analysis Policy (Syslog: NAPPolicy)

The network analysis policy (NAP), if any, associated with the generation of the event.

Original Client Country

The country where the original client IP address belongs. To obtain this value, the system extracts the original client IP address from an X-Forwarded-For (XFF), True-Client-IP, or custom-defined HTTP header, then maps it to the country using the geolocation database (GeoDB). To populate this field, you must enable an access control rule that handles proxied traffic based on its original client.

Original Client IP (Syslog: originalClientSrcIP )

The original client IP address from an X-Forwarded-For (XFF), True-Client-IP, or custom-defined HTTP header. To populate this field, you must enable an access control rule that handles proxied traffic based on its original client.

Other Enrichment

Non-MITRE information associated with an event that supports an expanded view.

Prefilter Policy (Syslog: Prefilter Policy)

The prefilter policy that handled the connection.

Protocol (Syslog: Protocol)

In the Secure Firewall Management Center web interface:

  • This value constrains summaries and graphs.

  • This field is available only as a search field.

The transport protocol used in the connection. To search for a specific protocol, use the name or number protocol as listed in http://www.iana.org/assignments/protocol-numbers.

QoS-Applied Interface

For rate-limited connections, the name of the interface where you applied rate limiting.

QoS-Dropped Initiator/Responder Bytes

The number of bytes dropped from the session initiator or session responder due to rate limiting.

QoS-Dropped Initiator/Responder Packets

The number of packets dropped from the session initiator or session responder due to rate limiting.

QoS Policy

The QoS policy that rate limited the connection.

QoS Rule

The QoS rule that rate limited the connection.

QUIC Session ID

A 64 bit internal session identifier to uniquely identify a QUIC connection within the firewall.

QUIC Stream ID

A 62-bit stream identifier to uniquely identify a stream within a QUIC connection.

Reason (Syslog: AccessControlRuleReason)

The reason or reasons the connection was logged, in many situations. For a full list, see Connection Event Reasons.

Connections with a Reason of IP Block, DNS Block, and URL Block have a threshold of 15 seconds per unique initiator-responder pair. After the system blocks one of those connections, it does not generate connection events for additional blocked connections between those two hosts for the next 15 seconds, regardless of port or protocol.

Referenced Host (Syslog: ReferencedHost)

If the protocol in the connection is HTTP or HTTPS, this field displays the host name that the respective protocol was using.

SecIntMatchingIP (Syslog Only)

Which IP address matched.

Possible values: None, Destination, or Source.

Security Context (Syslog: Context)

For connections handled by ASA FirePOWER in multiple context mode, the metadata identifying the virtual firewall group through which the traffic passed.

Security Intelligence Category (Syslog: URLSICategory, DNSSICategory , IPReputationSICategory)

The name of the object that represents or contains the blocked URL, domain, or IP address in the connection. The Security Intelligence category can be the name of a network object or group, a Block list, a custom Security Intelligence list or feed, a TID category related to an observation, or one of the categories in the Intelligence Feed.

In the Secure Firewall Management Center web interface, DNS, Network (IP address), and URL Security Intelligence connection events are combined into a single category field. In syslog messages, those events are specific by type.

Security-related connection events include security intelligence events and other connection events such as the ones that triggered intrusion or malware events. The Security Intelligence Summary workflow displays all the security intelligence events by their category and count. The events without a security intelligence category are grouped and displayed with the count only.

For more information about the categories in the Intelligence Feed, see Security Intelligence Categories.

Source Device

In the Secure Firewall Management Center web interface, this value constrains summaries and graphs.

The IP address of the NetFlow exporter that broadcast the data used to generate for the connection. If the connection was detected by a managed device, this field displays Firepower.

Source Port/ICMP Type (Syslog: SrcPort, ICMPType)

In the Secure Firewall Management Center web interface, these values constrain summaries and graphs.

The port or ICMP type used by the session initiator.

SourceSecurityGroup (Syslog Only)

This field holds the text value associated with the numeric value in SourceSecurityGroupTag, if available. If the group name is not available as a text value, then this field contains the same integer value as the SourceSecurityGroupTag field. Tags can be obtained from inline devices (no source SGT name specified) or from ISE (which specifies a source).

SourceSecurityGroupType (Syslog Only)

This field displays the source from which a security group tag was obtained.

Value

Description

Inline

Source SGT value is from packet

Session Directory

Source SGT value is from ISE via session directory topic

SXP

Source SGT value is from ISE via SXP topic

Source SGT (Syslog: SourceSecurityGroupTag)

The numeric representation of the Security Group Tag (SGT) attribute of the packet involved in the connection. The SGT specifies the privileges of a traffic source within a trusted network. Security Group Access (a feature of both Cisco TrustSec and Cisco ISE) applies the attribute as packets enter the network.

SSL Actual Action (Syslog: SSLActualAction)

In the Secure Firewall Management Center web interface, this field is a search field only.

The system displays field values in the SSL Status field on search workflow pages.

The action the system applied to encrypted traffic in the SSL policy.

Action

Description

Block/Block with reset

Represents blocked encrypted connections.

Decrypt (Resign)

Represents an outgoing connection decrypted using a re-signed server certificate.

Decrypt (Replace Key)

Represents an outgoing connection decrypted using a self-signed server certificate with a substituted public key.

Decrypt (Known Key)

Represents an incoming connection decrypted using a known private key.

Default Action

Indicates the connection was handled by the default action.

Do not Decrypt

Represents a connection the system did not decrypt.

SSL Certificate Information (Syslog: SSLCertificate)

In the Secure Firewall Management Center web interface, this field is a search field only.

The information stored on the public key certificate used to encrypt traffic, including:

  • Subject/Issuer Common Name

  • Subject/Issuer Organization

  • Subject/Issuer Organization Unit

  • Not Valid Before/After

  • Serial Number

  • Certificate Fingerprint

  • Public Key Fingerprint

SSL Certificate Status (Syslog: SSLServerCertStatus)

This applies only if you configured a Certificate Status SSL rule condition. If encrypted traffic matches an SSL rule, this field displays one or more of the following server certificate status values:

  • Self Signed

  • Valid

  • Invalid Signature

  • Invalid Issuer

  • Expired

  • Unknown

  • Not Valid Yet

  • Revoked

If undecryptable traffic matches an SSL rule, this field displays Not Checked.

SSL Cipher Suite (Syslog: SSSLCipherSuite)

A macro value representing a cipher suite used to encrypt the connection. See https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml for cipher suite value designations.

SSL Encryption applied to the connection

This field is available only as a search field in the Secure Firewall Management Center web interface.

Enter yes or no in the SSL search field to view TLS/SSL-encrypted or non-encrypted connections.

SSL Expected Action (Syslog: SSLExpectedAction)

In the Secure Firewall Management Center web interface, this field is a search field only.

The action the system expected to apply to encrypted traffic, given the SSL rule in effect.

Enter any of the values listed for SSL Actual Action.

SSL Failure Reason (Syslog: SSLFlowStatus)

The reason the system failed to decrypt encrypted traffic:

  • Unknown

  • No Match

  • Success

  • Uncached Session

  • Unknown Cipher Suite

  • Unsupported Cipher Suite

  • Unsupported SSL Version

  • SSL Compression Used

  • Session Undecryptable in Passive Mode

  • Handshake Error

  • Decryption Error

  • Pending Server Name Category Lookup

  • Pending Common Name Category Lookup

  • Internal Error

  • Incomplete Handshake

  • Network Parameters Unavailable

  • Invalid Server Certificate Handle

  • Server Certificate Fingerprint Unavailable

  • Cannot Cache Subject DN

  • Cannot Cache Issuer DN

  • Unknown SSL Version

  • External Certificate List Unavailable

  • External Certificate Fingerprint Unavailable

  • Internal Certificate List Invalid

  • Internal Certificate List Unavailable

  • Internal Certificate Unavailable

  • Internal Certificate Fingerprint Unavailable

  • Server Certificate Validation Unavailable

  • Server Certificate Validation Failure

  • Invalid Action

Field values are displayed in the SSL Status field on the search workflow pages.

SSL Flow Error

The error name and hexadecimal code if an error occurred during the TLS/SSL session; Success if no error occurred.

SSL Flow Flags

The first ten debugging level flags for an encrypted connection. On a workflow page, to view all flags, click the ellipsis (...).

The message OVER_SUBSCRIBED is displayed if your managed device is overloaded. For more information, see Troubleshoot TLS/SSL Oversubscription.

SSL Flow Messages

The keywords below indicate encrypted traffic is associated with the specified message type exchanged between client and server during the TLS/SSL handshake. See http://tools.ietf.org/html/rfc5246 for more information.

  • HELLO_REQUEST

  • CLIENT_ALERT

  • SERVER_ALERT

  • CLIENT_HELLO

  • SERVER_HELLO

  • SERVER_CERTIFICATE

  • SERVER_KEY_EXCHANGE

  • CERTIFICATE_REQUEST

  • SERVER_HELLO_DONE

  • CLIENT_CERTIFICATE

  • CLIENT_KEY_EXCHANGE

  • CERTIFICATE_VERIFY

  • CLIENT_CHANGE_CIPHER_SPEC

  • CLIENT_FINISHED

  • SERVER_CHANGE_CIPHER_SPEC

  • SERVER_FINISHED

  • NEW_SESSION_TICKET

  • HANDSHAKE_OTHER

  • APP_DATA_FROM_CLIENT

  • APP_DATA_FROM_SERVER

  • SERVER_NAME_MISMATCH

    The server certificate seen in the session has a Common Name or SAN values not corresponding to the destined domain name.

  • CERTIFICATE_CACHE_HIT

    A certificate matching the destined domain name was found in the cache.

  • CERTIFICATE_CACHE_MISS

    A certificate matching the destined domain name was not found in the cache.

The message HEARTBEAT is displayed if applications are using the TLS/SSL heartbeat extension. For more information, see About TLS Heartbeat.

SSL Policy (Syslog: SSLPolicy)

The SSL policy that handled the connection.

If TLS server identity discovery is enabled in the access control policy advanced settings, and there is no SSL policy associated with the access control policy, this field holds none for all SSL events.

SSL Rule (Syslog: SSLRuleName)

The SSL rule or default action that handled the connection, as well as the first Monitor rule matched by that connection. If the connection matched a Monitor rule, the field displays the name of the rule that handled the connection, followed by the Monitor rule name.

SSLServerName (Syslog Only)

This field exists ONLY as a syslog field; it does not exist in the Secure Firewall Management Center web interface.

Hostname of the server with which the client established an encrypted connection.

SSL Session ID (Syslog: SSLSessionID)

The hexadecimal Session ID negotiated between the client and server during the TLS/SSL handshake.

SSL Status

The action associated with the SSL Actual Action (SSL rule, default action, or undecryptable traffic action) that logged the encrypted connection. The Lock icon links to SSL certificate details. If the certificate is unavailable (for example, for connections blocked due to TLS/SSL handshake error), the lock icon is dimmed.

If the system fails to decrypt an encrypted connection, it displays the SSL Actual Action (undecryptable traffic action) taken, as well as the SSL Failure Reason. For example, if the system detects traffic encrypted with an unknown cipher suite and allows it without further inspection, this field displays Do Not Decrypt (Unknown Cipher Suite).

If the SSL handshake of an encrypted connection is incomplete and the system fails to decrypt the traffic, SSL Status field displays Unknown (Incomplete Handshake).

When searching this field, enter one or more of the SSL Actual Action and SSL Failure Reason values to view encrypted traffic the system handled or failed to decrypt.

SSL Subject/Issuer Country

This field is available only in the Secure Firewall Management Center web interface, and only as a search field.

A two-character ISO 3166-1 alpha-2 country code for the subject or issuer country associated with the encryption certificate.

SSL Ticket ID (Syslog: SSLTicketID)

A hexadecimal hash value of the session ticket information sent during the TLS/SSL handshake.

SSLURLCategory (Syslog Only)

URL categories for the URL visited in the encrypted connection.

This field exists ONLY as a syslog field; in the Secure Firewall Management Center web interface, values in this field are included in the URL Category column.

See also URL.

SSL Version (Syslog: SSLVersion)

The TLS/SSL protocol version used to encrypt the connection:

  • Unknown

  • SSLv2.0

  • SSLv3.0

  • TLSv1.0

  • TLSv1.1

  • TLSv1.2

  • TLSv1.3

TCP Flags (Syslog: TCPFlags)

For connections generated from NetFlow data, the TCP flags detected in the connection.

When searching this field, enter a list of comma-separated TCP flags to view all connections that have at least one of those flags.

Time

The ending time of the five-minute interval that the system used to aggregate connections in a connection summary. This field is not searchable.

Total Packets

This field is available only as a search field.

The total number of packets transmitted in the connection.

Traffic (KB)

This field is available only as a search field.

The total amount of data transmitted in the connection, in kilobytes.

Tunnel/Prefilter Rule (Syslog: Tunnel or Prefilter Rule)

The tunnel rule, prefilter rule, or prefilter policy default action that handled the connection.

URL, URL Category, and URL Reputation (Syslog: URL, URLCategory and SSLURLCategory, URLReputation)

The URL requested by the monitored host during the session and its associated category and reputation, if available.

For an event to display URL category and reputation, you must include the applicable URL rules in an access control policy and configure the rule with URL category and URL reputation under the URLs tab.

URL category and reputation do not appear in an event if the connection is processed before it matches a URL rule.

If the URL column is empty and DNS filtering is enabled, the DNS Query field shows the domain, and the URL Category and URL Reputation values apply to the domain.

If the system identifies or blocks a TLS/SSL application, the requested URL is in encrypted traffic, so the system identifies the traffic based on an SSL certificate. For TLS/SSL applications, therefore, this field indicates the common name contained in the certificate.

See also SSLURLCategory, above.

User Agent (Syslog: UserAgent)

The user-agent string application information extracted from HTTP traffic detected in the connection.

VLAN ID (Syslog: VLAN_ID)

The innermost VLAN ID associated with the packet that triggered the connection.

VPN Action

VPN action associated with the connection.

Possible values are:

  • Encrypt: VPN encrypts the traffic for the logged connection. See Encrypt Peer column to know the IP address of the VPN peer which encrypts the connection.

  • Decrypt: VPN decrypts the traffic for the logged connection. See Encrypt Peer column to know the IP address of the VPN peer which decrypts the connection.

  • VPN Routing: The traffic transitions through the VPN tunnel. VPN performs decryption at the beginning of connection and encryption at the end of connection. See Encrypt Peer and Decrypt Peer columns to know the IP addresses of the VPN peers which encrypts and decrypts the connection.

Web Application (Syslog: WebApplication)

The web application, which represents the content or requested URL for HTTP traffic detected in the connection.

If the web application does not match the URL for the event, the traffic is probably referred traffic, such as advertisement traffic. If the system detects referred traffic, it stores the referring application (if available) and lists that application as the web application.

If the system cannot identify the specific web application in HTTP traffic, this field displays Web Browsing.

Web Application Category and Tag

Criteria that characterize the application to help you understand the application's function.

About Connection and Security-Related Connection Event Fields

In the Secure Firewall Management Center web interface, you can view and search connection and Security-Related connection events using tabular and graphical workflows under the Analysis > Connections submenus.


Note


For each Security-Related connection event, there is an identical, separately stored connection event. All Security-Related connection event have a populated Security Intelligence Category field.

The information available for any individual event can vary depending on how, why, and when the system logged the connection.

Search Constraints

Fields marked with an asterisk (*) on search pages constrain connection graphs and connection summaries. Because connection graphs are based on connection summaries, the same criteria that constrain connection summaries also constrain connection graphs. If you search connection summaries using invalid search constraints and view your results using a connection summary page in a custom workflow, the invalid constraints are labeled as not applicable (N/A) and are marked with a strikethrough.

Syslog Fields

Most fields appear both in the Secure Firewall Management Center web interface and as syslog messages. Fields without a listed syslog equivalent are not available in syslog messages. A few fields are syslog-only, as noted, and few others are separate fields in syslog messages but are consolidated fields in the web interface or vice-versa.

A Note About Initiator/Responder, Source/Destination, and Sender/Receiver Fields

Table 1. Comparison of Terms

Fields

Event Type

Description

Initiator/Responder

Connection

Initiator/responder of the connection.

The initiator of a connection is not necessarily the same as the source of an intrusion or the sender of a malware file.

Source/Destination

Intrusion

Source/destination of the attack.

The source of an intrusion event can be the initiator or the responder of the connection.

Sender/Receiver

(Sending..., Receiving...)

File, Malware

Sender/receiver of a file or malware.

The sender of a file is not necessarily the initiator of the connection, as a file may be uploaded or downloaded.

Connection Event Reasons

The Reason field in a connection event displays the reason or reasons the connection was logged, in the following situations:

Reason

Description

Content Restriction

The system modified the packet to enforce content restrictions related to the Safe Search feature.

DNS Block

The system denied the connection without inspection, based on the domain name and Security Intelligence data. A reason of DNS Block is paired with an action of Block, Domain not found, or Sinkhole, depending on the DNS rule action.

DNS Monitor

The system would have denied the connection based on the domain name and Security Intelligence data, but you configured the system to monitor, rather than deny, the connection.

Elephant Flow

The connection is large enough to be considered an elephant flow, which is a flow that can be large enough to affect overall system performance. By default, elephant flows are larger than 1GB/10 seconds. You can adjust the byte and time thresholds for identifying elephant flows in the threat defense CLI using the system support elephant-flow-detection command. For more information, see the Cisco Secure Firewall Threat Defense Command Reference.

Note

 

A flow is considered as elephant flow only when both the byte and time thresholds are surpassed.

You can create a custom dashboard to correlate elephant flows and other interrelated metrics, for example, CPU metrics such as Snort, System, and Physical Cores. For more information, see the System Monitoring and Troubleshooting chapter.

Elephant Flow Exempted

If an elephant flow is detected and it matches the L4 ACL rules that are defined for flows that must be exempted from remediation.

File Block

The connection contained a file or malware file that the system prevented from being transmitted. File Block reason is always paired with an action of Block.

File Custom Detection

The connection contained a file on the custom detection list that the system prevented from being transmitted.

File Monitor

The system detected a particular type of file in the connection.

File Resume Allow

File transmission was originally blocked by a Block Files or Block Malware file rule. After a new access control policy allowing the file was deployed, the HTTP session automatically resumed. This reason only appears in inline deployments.

File Resume Block

File transmission was originally allowed by a Detect Files or Malware Cloud Lookup file rule. After a new access control policy blocking the file was deployed, the HTTP session automatically stopped. This reason only appears in inline deployments.

Intelligent App Bypass

The Intelligent Application Bypass (IAB) mode:

  • If the action is Trust, IAB was in bypass mode. Matching traffic passed without further inspection.

  • If the action is Allow, IAB was in test mode. Matching traffic was available for further inspection.

Intrusion Block

Snort2 Engine—The system blocked or would have blocked an exploit (intrusion policy violation) detected in the connection. A reason of Intrusion Block is paired with an action of Block for blocked exploits and Allow for would-have-blocked exploits.

Snort3 Engine—When there is a "would have dropped" result, the connection event reason is blank, instead of "Intrusion block". The "would have dropped" event is treated the same as “Allow” in regards to the connection event reason being populated.

Intrusion Monitor

The system detected, but did not block, an exploit detected in the connection. This occurs when the state of the triggered intrusion rule is set to Generate Events.

IP Block

The system denied the connection without inspection, based on the IP address and Security Intelligence data. A reason of IP Block is always paired with an action of Block.

IP Monitor

The system would have denied the connection based on the IP address and Security Intelligence data, but you configured the system to monitor, rather than deny, the connection.

SSL Block

The system blocked an encrypted connection based on the TLS/SSL inspection configuration. A reason of SSL Block is always paired with an action of Block.

URL Block

The system denied the connection without inspection, based on the URL and Security Intelligence data. A reason of URL Block is always paired with an action of Block.

URL Monitor

The system would have denied the connection based on the URL and Security Intelligence data, but you configured the system to monitor, rather than deny, the connection.

User Bypass

The system initially blocked a user’s HTTP request, but the user clicked through a warning page to view the site. A reason of User Bypass is always paired with an action of Allow.

Requirements for Populating Connection Event Fields

The information available for a connection event, Security-Related connection events, or connection summary depends on several factors.

Appliance Model and License

Many features require that you enable specific licensed capabilities on target devices, and many features are only available on some models.

Traffic Characteristics

The system only reports information present (and detectable) in network traffic. For example, there could be no user associated with an initiator host, or no referenced host detected in a connection where the protocol is not DNS, HTTP, or HTTPS.

Origin/Detection Method: Traffic-Based Detection vs NetFlow

With the exception of NetFlow-only fields, the information available in NetFlow records is more limited than the information generated by traffic-based detection; see Differences between NetFlow and Managed Device Data.

Evaluation Stage

Each type of traffic inspection and control occurs where it makes the most sense for maximum flexibility and performance.

For example, the system enforces Security Intelligence before more resource-intensive evaluations. When a connection is blocked by Security Intelligence, the resulting event does not contain the information that the system would have gathered from subsequent evaluation, for example, user identity.

Logging Method: Beginning or End of Connection

When the system detects a connection, whether you can log it at its beginning or its end (or both) depends on how you configure the system to detect and handle it.

Beginning-of-connection events do not have information that must be determined by examining traffic over the duration of the session (for example, the total amount of data transmitted or the timestamp of the last packet in the connection). Beginning-of-connection events are also not guaranteed to have information about application or URL traffic in the session, and do not contain any details about the session’s encryption. Beginning-of-connection logging is usually the only option for blocked connections.

Connection Event Type: Individual vs Summary

Connection summaries do not contain all of the information associated with their aggregated connections. For example, because client information is not used to aggregate connections into connection summaries, summaries do not contain client information.

Keep in mind that connection graphs are based on connection summary data, which use only end-of-connection logs. If your system is configured to log only beginning-of-connection data, connection graphs and connection summary event views contain no data.


Note


Security-related connection events include security intelligence events and other connection events, such as the ones that triggered intrusion or malware events. The Security Intelligence Summary workflow groups the security-related connection events that do not have a security intelligence category and displays the count without a Security Intelligence Category value.


Other Configurations

Other configurations that affect connection logging include, but are not limited to:

  • ISE-related fields are populated only if you configure ISE, in connections associated with users who authenticate via an Active Directory domain controller. Connection events do not contain ISE data for users who authenticate via LDAP, RADIUS, or RSA domain controllers.

  • The Security Group Tag (SGT) fields are populated only if you configure ISE as an identity source or add custom SGT rule conditions.

  • Prefilter-related fields (including tunnel zone information in security zone fields) are populated only in connections handled by a prefilter policy.

  • TLS/SSL-related fields are populated only in encrypted connections handled by a decryption policy. You can view the values of the fields using a Do Not Decrypt rule action if you do not need to decrypt the traffic.

  • File information fields are populated only in connections logged by access control rules associated with file policies.

  • Intrusion information fields are populated only in connections logged by access control rules either associated with intrusion policies or using the default action.

  • QoS-related fields are populated only in connections subject to rate limiting.

  • The Reason field is populated only in specific situations, such as when a user bypasses an Interactive Block configuration.

  • The Domain field is only present if you have ever configured the Secure Firewall Management Center for multitenancy.

  • An advanced setting in the access control policy controls the number of characters the system stores in the connection log for each URL requested by monitored hosts in HTTP sessions. If you use this setting to disable URL logging, the system does not display individual URLs in the connection log, although you can still view category and reputation data, if it exists.

  • For the connection event to display URL category and reputation, you must include the applicable URL rules in an access control policy and configure the rule with URL category and URL reputation under the URLs tab. URL category and reputation do not appear in an event if the connection is processed before it matches a URL rule.

Information Available in Connection Event Fields

The table in this topic indicates when the system can populate connection and Security Intelligence fields. The columns in the table represent the following event types:

  • Origin: Direct—Events that represent connections detected and handled by a System managed device.

  • Origin: NetFlow—Events that represent connections exported by a NetFlow exporter.

  • Logging: Start—Events that represent connections logged at their beginning.

  • Logging: End—Events that represent connections logged at their end.

A "yes" in the table does not mean that the system must populate a connection event field, rather, that it can. The system only reports information present (and detectable) in network traffic. For example, TLS/SSL-related fields are populated only for records of encrypted connections handled by a decryption policy.

Connection Event Field

Origin: Direct

Origin: NetFlow

Logging: Start

Logging: End

Access Control Policy

yes

no

yes

yes

Access Control Rule

yes

no

yes

yes

Action

yes

no

yes

yes

Application Protocol

yes

yes

if available

yes

Application Protocol Category & Tag

yes

no

if available

yes

Application Risk

yes

no

if available

yes

Business Relevance

yes

no

if available

yes

Client

yes

no

if available

yes

Client Category & Tag

yes

no

if available

yes

Client Version

yes

no

if available

yes

Connections

yes

yes

no

yes

Count

yes

yes

yes

yes

Destination Port/ICMP Type

yes

yes

yes

yes

Destination SGT

yes

no

yes

yes

Device

yes

yes

yes

yes

Domain

yes

yes

yes

yes

DNS Query

yes

no

yes

yes

DNS Record Type

yes

no

yes

yes

DNS Response

yes

no

yes

yes

DNS Sinkhole Name

yes

no

yes

yes

DNS TTL

yes

no

yes

yes

Egress Interface

yes

no

yes

yes

Egress Security Zone

yes

no

yes

yes

Endpoint Location

yes

no

yes

yes

Endpoint Profile

yes

no

yes

yes

Files

yes

no

no

yes

First Packet

yes

yes

yes

yes

HTTP Referrer

yes

no

no

yes

HTTP Response Code

yes

no

yes

yes

Ingress Interface

yes

no

yes

yes

Ingress Security Zone

yes

no

yes

yes

Initiator Bytes

yes

yes

not useful

yes

Initiator Country

yes

no

yes

yes

Initiator IP

yes

yes

yes

yes

Initiator Packets

yes

yes

not useful

yes

Initiator User

yes

yes

yes

yes

Intrusion Events

yes

no

no

yes

Intrusion Policy

yes

no

yes

yes

IOC (Indication of Compromise)

yes

no

yes

yes

Last Packet

yes

yes

no

yes

NetBIOS Domain

yes

no

yes

yes

NetFlow Source/Destination Autonomous System

no

yes

no

yes

NetFlow Source/Destination Prefix

no

yes

no

yes

NetFlow Source/Destination TOS

no

yes

no

yes

NetFlow SNMP Input/Output

no

yes

no

yes

Network Analysis Policy

yes

no

yes

yes

Original Client Country

yes

no

yes

yes

Original Client IP

yes

no

yes

yes

Prefilter Policy

yes

no

yes

yes

QoS-Applied Interface

yes

no

no

yes

QoS-Dropped Initiator Bytes

yes

no

no

yes

QoS-Dropped Initiator Packets

yes

no

no

yes

QoS-Dropped Responder Bytes

yes

no

no

yes

QoS-Dropped Responder Packets

yes

no

no

yes

QoS Policy

yes

no

no

yes

QoS Rule

yes

no

no

yes

Reason

yes

no

yes

yes

Referenced Host

yes

no

no

yes

Responder Bytes

yes

yes

not useful

yes

Responder Country

yes

no

yes

yes

Responder IP

yes

yes

yes

yes

Responder Packets

yes

yes

not useful

yes

Security Context (ASA only)

yes

no

yes

yes

Security Intelligence Category

yes

no

yes

yes

Source Device

yes

yes

yes

yes

Source Port/ICMP Type

yes

yes

yes

yes

Source SGT

yes

no

yes

yes

SSL Certificate Status

yes

no

no

yes

SSL Cipher Suite

yes

no

no

yes

SSL Flow Error

yes

no

no

yes

SSL Flow Flags

yes

no

no

yes

SSL Flow Messages

yes

no

no

yes

Decryption Policy

yes

no

no

yes

Decryption Rule

yes

no

no

yes

SSL Session ID

yes

no

no

yes

SSL Status

yes

no

no

yes

SSL Version

yes

no

no

yes

TCP Flags

no

yes

no

yes

Time

yes

yes

no

yes

Tunnel/Prefilter Rule

yes

no

yes

yes

URL

yes

no

if available

yes

URL Category

yes

no

if available

yes

URL Reputation

yes

no

if available

yes

User Agent

yes

no

no

yes

VLAN ID

yes

no

yes

yes

Web Application

yes

no

if available

yes

Web Application Category & Tag

yes

no

if available

yes

Using Connection and Security-Related Connection Event Tables

You can use the Secure Firewall Management Center to view a table of connection or Security-Related connection events. Then, you can manipulate the event view depending on the information you are looking for.

In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.

The page you see when you access connection graphs differs depending on the workflow you use. You can use a predefined workflow, which terminates in a table view of events. You can also create a custom workflow that displays only the information that matches your specific needs.

When you are using a connection or Security Intelligence workflow table, you can perform many common actions.

Note that when you constrain connection events on a drill-down page, the packets and bytes from identical events are summed. However, if you are using a custom workflow and did not add a Count column to a drill-down page, the events are listed individually and packets and bytes are not summed.

Note that Connection Events table view displays 1 of Many instead of how many pages of events are available if your system generates more than 25 connection events.

Before you begin

You must be an Admin or Security Analyst user to perform this task.

Procedure


Step 1

Choose either of the following:

  • Analysis > Connections > Events (for connection events)
  • Analysis > Connections > Security-Related Events

Note

 

If a connection graph appears instead of a table, click (switch workflow) by the workflow title, and choose the predefined Connection Events workflow, or a custom workflow. Note that all predefined connection event workflows—including connection graphs—terminate in a table view of connections.

Step 2

You have the following choices:

  • Time Range — To adjust the time range, which is useful if no events appear, see Changing the Time Window.

  • Data Source — If data is stored remotely using Security Analytics and Logging (On Premises), and you have good reason to change the data source, choose a data source. For important information about this option, see Work in Secure Firewall Management Center with Connection Events Stored on a Secure Network Analytics Appliance.

  • Field Names — To learn more about the contents of the columns in the table, see Connection and Security-Related Connection Event Fields.

    Tip

     

    In the table view of events, multiple fields are hidden by default. To change the fields that appear, click the x in any column name to display a field chooser.

  • Additional information — To view data in available sources external to your system, right-click an event value. The options you see depend on the data type and include public sources; other sources depend on the resources you have configured. For information, see Event Investigation Using Web-Based Resources

  • External intelligence — To gather intelligence about an event, right-click an event value in the table and choose from a Cisco or third-party intelligence source. For example, you can get details about a suspicious IP address from Cisco Talos. The options you see depend on the data type and the integrations that are configured on your system. For more information, see Event Investigation Using Web-Based Resources.

  • Host Profile — To view the host profile for an IP address, click Host Profile or, for hosts with active indications of compromise (IOC) tags, Compromised Host that appears next to the IP address.

  • User Profile — To view user identity information, click the user icon that appears next to the User Identity, or for users associated with IOCs, Red User.

  • Files and Malware —To view the files, including malware, detected or blocked in a connection, click View Files and proceed as described in Viewing Files and Malware Detected in a Connection.

  • Intrusion Events — To view the intrusion events associated with a connection, as well as their priority and impact, click Intrusion Events in the Intrusion Events column and proceed as described in Viewing Intrusion Events Associated with a Connection.

    Tip

     

    To quickly view intrusion, file, or malware events associated with one or more connections, check the connections using the check boxes in the table, then choose the appropriate option from the Jump to drop-down list. Note that because they are blocked before access control rule evaluation, there can be no files or intrusions associated with connections blocked by Security Intelligence. You can only see this information for a Security Intelligence event if you configured Security Intelligence to monitor, rather than block, connections.

  • Certificate — To view details about an available certificate used to encrypt a connection, click Enabled Lock in the SSL Status column.

  • Constrain — To constrain the columns that appear, click Close (close icon) in the column heading that you want to hide. In the pop-up window that appears, click Apply.

    Tip

     

    To hide or show other columns, check or clear the appropriate check boxes before you click Apply. To add a disabled column back to the view, expand the search constraints, then click the column name under Disabled Columns.

  • Delete Events — (Security-Related connection event tables only) To delete some or all items in the current constrained view, check the check boxes next to items you want to delete and click Delete or click Delete All.

  • Drill Down — See Using Drill-Down Pages.

    Tip

     

    To drill down using one of several Monitor rules that matched a logged connection, click an N  Monitor Rules value. In the pop-up window that appears, click the Monitor rule you want to use to constrain connection events.

  • Navigate This Page — See Workflow Page Traversal Tools.

  • Navigate Between Pages — To navigate between pages in the current workflow, keeping the current constraints, click the appropriate page link at the top left of the workflow page.

  • Navigate Between Event Views — To navigate to other event views to view associated events, click Jump to and choose the event view from the drop-down list.

  • Sort — To sort data in a workflow, click the column title. Click the column title again to reverse the sort order.


Viewing Files and Malware Detected in a Connection

If you associate a file policy with one or more access control rules, the system can detect files (including malware) in matching traffic. Use the Analysis > Connections menu options to see the file events, if any, associated with the connections logged by those rules. Instead of a list of files, the Secure Firewall Management Center displays view files () in the Files column. The number on the view files indicates the number of files (including malware files) detected or blocked in that connection.

Not all file and malware events are associated with connections. Specifically:

  • Malware events detected by Secure Endpoint ("endpoint-based malware events" ) are not associated with connections. Those events are imported from your Secure Endpoint deployment.

  • Many IMAP-capable email clients use a single IMAP session, which ends only when the user exits the application. Although long-running connections are logged by the system, files downloaded in the session are not associated with the connection until the session ends.

In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.

Before you begin

You must be an Admin or Security Analyst user to perform this task.

Procedure


Step 1

Go to Analysis > Connections and choose the relevant option.

Step 2

While using a connection event table, click View Files.

A pop-up window appears with a list of the files detected in the connection as well as their types, and if applicable, their malware dispositions.

Step 3

You have the following choices:

  • View — To view a table view of file events, click a File's View.

  • View — To view details in a table view of malware events, click a Malware File’s View.

  • Track — To track the file’s transmission through your network, click a File’s Trajectory.

  • View — To view details on all of the connection’s detected file or malware events detected by malware defense ("network-based malware events"), click View File Events or View Malware Events.


Viewing Intrusion Events Associated with a Connection

If you associate an intrusion policy with an access control rule or default action, the system can detect exploits in matching traffic. Use the Analysis > Connections menu options to see the intrusion events, if any, associated with logged connections, as well as their priority and impact.

In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.

Before you begin

You must be an Admin or Security Analyst user to perform this task.

Procedure


Step 1

Go to Analysis > Connections and choose the relevant option.

Step 2

While using a connection event table, click Intrusion Events in the Intrusion Events column.

Step 3

In the pop-up window that appears, you have the following options:

  • Click a Listed Event’s View to view details in the packet view.
  • Click View Intrusion Events to view details on all of the connection’s associated intrusion events.

Encrypted Connection Certificate Details

You can use options under the Analysis > Connections menu to display the public key certificate (if available) used to encrypt a connection handled by the system. The certificate contains the following information.

Table 2. Encrypted Connection Certificate Details

Attribute

Description

Subject/Issuer Common Name

The host and domain name of the certificate subject or certificate issuer.

Subject/Issuer Organization

The organization of the certificate subject or certificate issuer.

Subject/Issuer Organization Unit

The organizational unit of the certificate subject or certificate issuer.

Not Valid Before/After

The dates when the certificate is valid.

Serial Number

The serial number assigned by the issuing CA.

Certificate Fingerprint

The SHA hash value used to authenticate the certificate.

Public Key Fingerprint

The SHA hash value used to authenticate the public key contained within the certificate.

Viewing the Connection Summary Page

The Connection Summary page is visible only to users who have custom roles that are restricted by searches on connection events and who have been granted explicit menu-based access to the Connection Summary page. This page provides graphs of the activity on your monitored network organized by different criteria. For example, the Connections over Time graph displays the total number of connections on your monitored network over the interval that you choose.

You can perform almost all the same actions on connection summary graphs that you can perform on connection graphs. However, because the graphs on the Connection Summary page are based on aggregated data, you cannot examine the individual connection events on which the graphs are based. In other words, you cannot drill down to a connection data table view from a connection summary graph.

In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.

Procedure


Step 1

Choose Overview > Summary > Connection Summary.

Step 2

From the Select Device list, choose the device whose summary you want to view, or choose All to view a summary of all devices.

Step 3

To manipulate and analyze the connection graphs, proceed as described in Using Connection Event Graphs.

Tip

 

To detach a connection graph so you can perform further analysis without affecting the default time range, click View.


History for Connection and Security Intelligence Events

Feature

Minimum Management Center

Minimum Threat Defense

Details

New Connection Event Reason - Elephant Flow.

7.1

Any

See Connection Event Reasons.

NAT Translated IP Address and Port

7.1

Any

Four new fields are added to the connection and security intelligence event table:

  • NAT Source IP

  • NAT Destination IP

  • NAT Source Port

  • NAT Destination Port

Ability to choose a data source when working with certain events stored remotely

7.0

Any

See History for Workflows.

DNS filtering

7.0

6.7 (Beta feature)

Any

When DNS filtering is enabled:

  • The DNS Query field may hold the domain associated with DNS filtering matches.

  • If the URL field is empty but DNS Query, URL Category, and URL Reputation have values, the event was generated by the DNS filtering feature, and the category and reputation apply to the domain specified in DNS Query.

  • See also DNS Filtering and Events in the Cisco Secure Firewall Management Center Device Configuration Guide.

Removal of support for custom tables for connection events

6.6

Any

You can no longer create custom tables for connection events. If you upgrade, any pre-existing custom tables for connection events are still available but always return no results.

There is no change to other types of custom tables.

New/Modified screens: The Tables option on Analysis > Advanced > Custom Tables

Platform: management center

Removal of ability to Delete and Delete All connection events

6.6

Any

The Delete and Delete All buttons have been removed from connection events table pages.

To purge all connection events, see Data Purge and Storage.

New/Modified screens: Analysis > Connections > Events

Platform: management center

New fields for VRF and SGT

6.6

Any

  • Ingress Virtual Router (Syslog: IngressVRF)

  • Egress Virtual Router (Syslog: EgressVRF)

  • DestinationSecurityGroupType (Syslog only)

  • SourceSecurityGroupType (Syslog only)

New and changed Security Group Tag fields

6.5

Any

Changes to fields in the management center web interface:

  • Changed fields: Security Group Tag is now Source SGT

  • New fields: Destination SGT

Changes to syslog fields:

  • Changed fields:

    SecurityGroup is now SourceSecurityGroupTag

  • New fields:

    • SourceSecurityGroup

    • DestinationSecurityGroup

    • DestinationSecurityGroupTag

Supported Platforms: management center, managed devices

New syslog field: Event Priority

6.5

Any

This field identifies connection events as High priority when they are associated with intrusion, file, malware, or Security Intelligence events.

Unique identifier for connection event in syslogs

6.4.0.4

Any

The following syslog fields collectively uniquely identify a connection event: DeviceUUID, First Packet Time, Connection Instance ID, and Connection Counter.