例

次に、AAA 認証サーバのデータベースの設定を表示する例を示します。

(Cisco Controller) > show aaa auth 
Management authentication server order:
    1............................................ local
    2............................................ tacacs

例

次に、CPU のアクセス コントロール リストを表示する例を示します。

(Cisco Controller) >show acl cpu 

CPU Acl Name................................
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
Applied to NPU.............................. No

次に、アクセス コントロール リストのサマリーを表示する例を示します。

(Cisco Controller) > show acl summary

ACL Counter Status              Disabled
----------------------------------------
IPv4 ACL Name                    Applied
-------------------------------- -------
acl1                         Yes
acl2                         Yes
acl3                         Yes
----------------------------------------
IPv6 ACL Name                    Applied
-------------------------------- -------
acl6                          No

次に、アクセス コントロール リストの詳細情報を表示する例を示します。

(Cisco Controller) > show acl detailed acl_name

      Source             Destination        Source Port Dest Port
I Dir IP Address/Netmask IP Address/Netmask Prot   Range    Range     DSCP Action Counter
- --- ------------------ ------------------ ---- --------- --------- ----- ------ -------
1 Any 0.0.0.0/0.0.0.0    0.0.0.0/0.0.0.0    Any  0-65535   0-65535    0    Deny         0
2 In  0.0.0.0/0.0.0.0    200.200.200.0/     6      80-80   0-65535    Any  Permit       0
                         255.255.255.0
DenyCounter :     0

（注）	パケットが ACL ルールと一致するたびに、Counter フィールドの値が増加します。また、DenyCounter フィールドの値は、パケットがルールのいずれとも一致しない場合に増加します。

例

次に、show acl detailed acl_name コマンドの出力例を示します。

(Cisco Controller) > show acl detailed android

No rules are configured for this ACL.
DenyCounter : 0 
URLs configured in this ACL
---------------------------
*.play.google.com 
*.store.google.com                  

例

次に、特定の URL ACL プロファイルの詳細情報を示します。

(Cisco Controller) >show acl url-acl detailed 

例

次に、show acl summary コマンドの出力例を示します。

(Cisco Controller) > show acl summary

 ACL Counter Status              Disabled
----------------------------------------
IPv4 ACL Name                    Applied
-------------------------------- -------
android                          No     
StoreACL                         Yes    
----------------------------------------
IPv6 ACL Name                    Applied
-------------------------------- -------                     1

例

次に、URL ACL プロファイルのサマリーを示します。

(Cisco Controller) > show acl summary

URL ACL Feature                 Disabled
ACL Counter Status               Enabled
----------------------------------------
URL ACL Name       Applied
---------------    -------
test                 No

例

次に、自動チャネル割り当ての設定および統計情報を表示する例を示します。

(Cisco Controller) > show advanced 802.11a channel
Automatic Channel Assignment
  Channel Assignment Mode........................ AUTO
  Channel Update Interval........................ 600 seconds [startup]
  Anchor time (Hour of the day).................. 0
  Channel Update Contribution.................... SNI.
  Channel Assignment Leader...................... 00:1a:6d:dd:1e:40
  Last Run....................................... 129 seconds ago
  DCA Sensitivity Level: ...................... STARTUP (5 dB)
  DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
    Minimum...................................... unknown
    Average...................................... unknown
    Maximum...................................... unknown
  Channel Dwell Times
    Minimum...................................... unknown
    Average...................................... unknown
    Maximum...................................... unknown
  Auto-RF Allowed Channel List................... 36,40,44,48,52,56,60,64,149,
    ............................................. 153,157,161
  Auto-RF Unused Channel List.................... 100,104,108,112,116,132,136,
    ............................................. 140,165,190,196
  DCA Outdoor AP option.......................... Enabled

例

次に、カバレッジ ホール検出の統計情報を表示する例を示します。

(Cisco Controller) > show advanced 802.11a coverage
Coverage Hole Detection
  802.11a Coverage Hole Detection Mode........... Enabled
  802.11a Coverage Voice Packet Count............ 100 packets
  802.11a Coverage Voice Packet Percentage....... 50%
  802.11a Coverage Voice RSSI Threshold.......... -80 dBm
  802.11a Coverage Data Packet Count............. 50 packets
  802.11a Coverage Data Packet Percentage........ 50%
  802.11a Coverage Data RSSI Threshold........... -80 dBm
  802.11a Global coverage exception level........ 25 %
  802.11a Global client minimum exception lev.... 3 clients

例

次に、シスコの無線 RF グループ設定を表示する例を示します。

(Cisco Controller) > show advanced 802.11a group
Radio RF Grouping
  802.11a Group Mode................................... AUTO
  802.11a Group Update Interval........................ 600 seconds
  802.11a Group Leader................................. xx:xx:xx:xx:xx:xx
    802.11a Group Member............................... xx:xx:xx:xx:xx:xx
  802.11a Last Run..................................... 133 seconds ago

例

次に、出力例を示します。

(Cisco Controller) >show advanced hyperlocation summary

Hyperlocation.................................... DOWN
Hyperlocation NTP Server......................... 0.0.0.0
Hyperlocation pak-rssi Threshold................. -100
Hyperlocation pak-rssi Trigger-Threshold......... 10
Hyperlocation pak-rssi Reset-Threshold........... 8
Hyperlocation pak-rssi Timeout................... 3

AP Name                         Ethernet MAC       Slots  Hyperlocation    Explicit AP config
------------------------------  -----------------  -----  ---------------  ------------------
APA023.9FD8.EA4C                40:ce:24:bf:8f:40  2      DOWN             0                 
APA023.9FD8.EA50                40:ce:24:bf:8f:80  2      DOWN             0                 
APA023.9FD8.EA9C                40:ce:24:bf:94:40  2      DOWN             0                 
AP0C75.BD13.B496                a0:23:9f:8a:5c:00  2      DOWN             0  

例

次に、すべてのビーコンの BLE ビーコン情報を表示する例を示します。

(Cisco Controller) >show advanced hyperlocation ble-beacon all

Global Configuration

                    BLE Advertised Transmit Power: c5 (-59 dBm)

  BLE beacon ID                     UUID                        TX Power(dBm)     Interval(Hz)    Status
-----------------    --------------------------------------    --------------    ------------    ----------
       1              00000000-0000-0000-0000-000000000000             0                1        Disabled

       2              00000000-0000-0000-0000-000000000000             0                1        Disabled

       3              00000000-0000-0000-0000-000000000000             0                1        Disabled

       4              00000000-0000-0000-0000-000000000000             0                1        Disabled

       5              00000000-0000-0000-0000-000000000000             0                1        Disabled

例

次に、show advanced 802.11b l2roam rf-param コマンドの出力例を示します。

(Cisco Controller) > show advanced 802.11b l2roam rf-param

L2Roam 802.11bg RF Parameters.....................
    Config Mode.................................. Default
    Minimum RSSI................................. -85
    Roam Hysteresis.............................. 2
    Scan Threshold............................... -72
    Transition time.............................. 5

例

次に、802.11b RF イベント ログおよびパフォーマンス ログを表示する例を示します。

(Cisco Controller) > show advanced 802.11b logging
RF Event and Performance Logging
  Channel Update Logging......................... Off
  Coverage Profile Logging....................... Off
  Foreign Profile Logging........................ Off
  Load Profile Logging........................... Off
  Noise Profile Logging.......................... Off
  Performance Profile Logging.................... Off
  TxPower Update Logging......................... Off

例

次に、802.11b ネットワークの無線監視を表示する例を示します。

(Cisco Controller) > show advanced 802.11b monitor
Default 802.11b AP monitoring
  802.11b Monitor Mode........................... enable
  802.11b Monitor Channels....................... Country channels
  802.11b RRM Neighbor Discovery Type............ Transparent
  802.11b AP Coverage Interval................... 180 seconds
  802.11b AP Load Interval....................... 60 seconds
  802.11b AP Noise Interval...................... 180 seconds
  802.11b AP Signal Strength Interval............ 60 seconds

例

次に、802.11a ネットワークの最適化されたローミング設定を表示する例を示します。

(Cisco Controller) > show advanced 802.11a optimized roaming
OptimizedRoaming
  802.11a OptimizedRoaming Mode.................. Enabled
  802.11a OptimizedRoaming Reporting Interval.... 20 seconds
  802.11a OptimizedRoaming Rate Threshold........ disabled

次に、802.11a ネットワークの最適化されたローミング統計情報を表示する例を示します。

(Cisco Controller) > show advanced 802.11a optimized roaming stats
OptimizedRoaming Stats
802.11a OptimizedRoaming Disassociations....... 2
802.11a OptimizedRoaming Rejections............ 1

例

次に、802.11a プロファイルのグローバル設定と統計情報を表示する例を示します。

(Cisco Controller) > show advanced 802.11 profile global
Default 802.11a AP performance profiles
  802.11a Global Interference threshold.............. 10%
  802.11a Global noise threshold..................... -70 dBm
  802.11a Global RF utilization threshold............ 80%
  802.11a Global throughput threshold................ 1000000 bps
  802.11a Global clients threshold................... 12 clients
  802.11a Global coverage threshold.................. 12 dB
  802.11a Global coverage exception level............ 80%
  802.11a Global client minimum exception lev........ 3 clients

次に、特定のアクセス ポイント プロファイルの設定と統計情報を表示する例を示します。

(Cisco Controller) >  show advanced 802.11 profile AP1
Cisco AP performance profile not customized

この応答は、この Lightweight アクセス ポイントのパフォーマンス プロファイルがグローバルなデフォルト設定を使用しており、個別に設定されていないことを示しています。

例

次に、802.11a ネットワークの設定および統計情報を表示する例を示します。

(Cisco Controller) > show advanced 802.11 receiver
802.11a Receiver Settings
  RxStart   : Signal Threshold........................... 15
  RxStart   : Signal Lamp Threshold...................... 5
  RxStart   : Preamble Power Threshold................... 2
  RxReStart : Signal Jump Status......................... Enabled
  RxReStart : Signal Jump Threshold...................... 10
  TxStomp : Low RSSI Status.............................. Enabled
  TxStomp : Low RSSI Threshold........................... 30
  TxStomp : Wrong BSSID Status........................... Enabled
  TxStomp : Wrong BSSID Data Only Status................. Enabled
  RxAbort : Raw Power Drop Status........................ Disabled
  RxAbort : Raw Power Drop Threshold..................... 10
  RxAbort : Low RSSI Status.............................. Disabled
  RxAbort : Low RSSI Threshold........................... 0
  RxAbort : Wrong BSSID Status........................... Disabled
  RxAbort : Wrong BSSID Data Only Status................. Disabled

例

次に、802.11b アクセス ポイント設定の要約を表示する例を示します。

(Cisco Controller) > show advanced 802.11b summary
AP Name      MAC Address        Admin State  Operation State   Channel TxPower
------------ ------------------ ------------ ----------------- ------- --------
CJ-1240      00:21:1b:ea:36:60    ENABLED          UP           161      1( )
CJ-1130      00:1f:ca:cf:b6:60    ENABLED          UP           56*      1(*)

（注）	チャネル番号または伝送レベルの横のアスタリスク（*）は、グローバルなアルゴリズム設定によって制御されていることを示します。

例

次に、802.11b 伝送パワー コストの設定および統計情報を表示する例を示します。

(Cisco Controller) > show advanced 802.11b txpower
Automatic Transmit Power Assignment
  Transmit Power Assignment Mode.................. AUTO
  Transmit Power Update Interval.................. 600 seconds
  Transmit Power Threshold........................ -65 dBm
  Transmit Power Neighbor Count................... 3 APs
  Transmit Power Update Contribution.............. SN.
  Transmit Power Assignment Leader................ xx:xx:xx:xx:xx:xx
  Last Run........................................ 384 seconds ago

例

次に、バックアップ コントローラ情報を表示する例を示します。

(Cisco Controller) >
show advanced backup-controller
AP primary Backup Controller ....................  controller 10.10.10.10
AP secondary Backup Controller ..................  0.0.0.0

例

次に、無線フレーム パディングの状態を表示する例を示します。

(Cisco Controller) > show advanced dot11-padding
dot11-padding.................................... Disabled

例

次に、詳細なホットスポット パラメータを表示する例を示します。

(Cisco Controller) >show advanced hotspot
ANQP 4-way state................................. Disabled
GARP Broadcast state: ........................... Enabled
GAS request rate limit .......................... Disabled
ANQP comeback delay in TUs(TU=1024usec).......... 50

例

次に、各アクセス ポイントの最大 802.1X セッションを表示する例を示します。

(Cisco Controller) >show advanced max-1x-sessions
Max 802.1x session per AP at a given time........ 0

例

次に、WLAN コントローラのプローブ設定を表示する例を示します。

(Cisco Controller) >show advanced probe
Probe request filtering.......................... Enabled
Probes fwd to controller per client per radio.... 12
Probe request rate-limiting interval............. 100 msec

例

次に、スイッチの制御パス レート制限モードを表示する例を示します。

(Cisco Controller) >show advanced rate
Control Path Rate Limiting.......................  Disabled

例

次に、システム タイマーの設定を表示する例を示します。

(Cisco Controller) >show advanced timers
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1200
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Local mode Fast Heartbeat (seconds)........... disable
AP flexconnect mode Fast Heartbeat (seconds)........... disable
AP Primary Discovery Timeout (seconds)........... 120

例

次に、再試行数の上限を超えた後に、クライアントの自動ハンドオフ モードを表示する例を示します。

(Cisco Controller) >show advanced client-handoff
Client auto handoff after retries................  130

例

次に、EAP 設定を表示する例を示します。

(Cisco Controller) > show advanced eap
EAP-Identity-Request Timeout (seconds)........... 1
EAP-Identity-Request Max Retries................. 20
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 1
EAP-Request Max Retries.......................... 20
EAPOL-Key Timeout (milliseconds)................. 1000
EAPOL-Key Max Retries............................ 2

例

次に、config advanced fra service-priority coverage コマンドを使用してサービス優先度を coverage に設定する場合の FRA 設定の例を示します。

(Cisco Controller) > show advanced fra
FRA State........................................ Enabled
FRA Sensitivity.................................. medium (95%)
FRA Interval..................................... 1 Hour(s)
  Last Run....................................... 2890 seconds ago
  Last Run Time.................................. 0 seconds
Service Priority................................. Coverage



AP Name                          MAC Address       Slot Current Band   COF %      Sensor %   Suggested Mode
-------------------------------- ----------------- ---- -------------- ---------- ---------- -------------------------
AP3800                           28:6f:7f:e0:60:40   0      2.4GHz       None       None       (Static)

 COF : Coverage Overlap Factor
 []  : COF when radio was in 2.4GHz Band

次に、config advanced fra service-priority client-aware コマンドを使用してサービス優先度を client-aware に設定する場合の FRA 設定の例を示します。

 show advanced fra
FRA State........................................ Enabled
FRA Sensitivity.................................. medium (95%)
FRA Interval..................................... 1 Hour(s)
  Last Run....................................... 3329 seconds ago
  Last Run Time.................................. 0 seconds
Service Priority................................. Client Aware
  Client Select Utilization Threshold............ 25%
  Client Reset Utilization Threshold............. 5%
  802.11a Client Network Preference.............. default



AP Name                          MAC Address       Slot Current Band   COF %      Sensor %   Suggested Mode
-------------------------------- ----------------- ---- -------------- ---------- ---------- -------------------------
AP3800                           28:6f:7f:e0:60:40   0     2.4GHz         0          None       (Static)

 COF : Coverage Overlap Factor
 []  : COF when radio was in 2.4GHz Band

例

次に、show advanced send-disassoc-on-handoff コマンドの出力例を示します。

(Cisco Controller) > show advanced send-disassoc-on-handoff
Send Disassociate on Handoff..................... Disabled

例

次に、show advanced sip-preferred-call-no コマンドの出力例を示します。

(Cisco Controller) > show advanced sip-preferred-call-no
Preferred Call Numbers List
Call Index            Preferred Call No
-----------           ------------------
1                      911
2                      100
3                      101
4                      102
5                      103
6                      104

例

次に、show advanced sip-snooping-ports コマンドの出力例を示します。

(Cisco Controller) > show advanced sip-snooping-ports
 SIP Call Snoop Ports: 1000 - 2000

例

次に、show arp kernel コマンドの出力例を示します。

(Cisco Controller) > show arp kernel
IP address       HW type     Flags       HW address            Mask     Device
192.0.2.1        0x1         0x2         00:1A:6C:2A:09:C2     *        dtl0
192.0.2.8        0x1         0x6         00:1E:E5:E6:DB:56     *        dtl0

例

次に、show arp switch コマンドの出力例を示します。

(Cisco Controller) > show arp switch
MAC Address          IP Address         Port      VLAN      Type
------------------- ---------------- ------------ ---- -------------------
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port    1         
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port               
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port               

例

次に、アクセス ポイントの自動 RF 情報を表示する例を示します。

(Cisco Controller) > show ap auto-rf 802.11a AP1
Number Of Slots.................................. 2
AP Name.......................................... AP03
MAC Address...................................... 00:0b:85:01:18:b7
  Radio Type..................................... RADIO_TYPE_80211a
  Noise Information
    Noise Profile................................ PASSED
    Channel 36...................................  -88 dBm
    Channel 40...................................  -86 dBm
    Channel 44...................................  -87 dBm
    Channel 48...................................  -85 dBm
    Channel 52...................................  -84 dBm
    Channel 56...................................  -83 dBm
    Channel 60...................................  -84 dBm
    Channel 64...................................  -85 dBm
  Interference Information
    Interference Profile......................... PASSED
    Channel 36...................................  -66 dBm @  1% busy
    Channel 40................................... -128 dBm @  0% busy
    Channel 44................................... -128 dBm @  0% busy
    Channel 48................................... -128 dBm @  0% busy
    Channel 52................................... -128 dBm @  0% busy
    Channel 56...................................  -73 dBm @  1% busy
    Channel 60...................................  -55 dBm @  1% busy
    Channel 64...................................  -69 dBm @  1% busy
  Rogue Histogram (20/40_ABOVE/40_BELOW)
    Channel 36................................... 16/ 0/ 0
    Channel 40................................... 28/ 0/ 0
    Channel 44...................................  9/ 0/ 0
    Channel 48...................................  9/ 0/ 0
    Channel 52...................................  3/ 0/ 0
    Channel 56...................................  4/ 0/ 0
    Channel 60...................................  7/ 1/ 0
    Channel 64...................................  2/ 0/ 0
  Load Information
    Load Profile................................. PASSED
    Receive Utilization.......................... 0%
    Transmit Utilization......................... 0%
    Channel Utilization.......................... 1%
    Attached Clients............................. 1 clients
  Coverage Information
    Coverage Profile............................. PASSED
    Failed Clients............................... 0 clients
  Client Signal Strengths
    RSSI -100 dBm................................ 0 clients
    RSSI  -92 dBm................................ 0 clients
    RSSI  -84 dBm................................ 0 clients
    RSSI  -76 dBm................................ 0 clients
    RSSI  -68 dBm................................ 0 clients
    RSSI  -60 dBm................................ 0 clients
    RSSI  -52 dBm................................ 0 clients
  Client Signal To Noise Ratios
    SNR    0 dBm................................. 0 clients
    SNR    5 dBm................................. 0 clients
    SNR   10 dBm................................. 0 clients
    SNR   15 dBm................................. 0 clients
    SNR   20 dBm................................. 0 clients
    SNR   25 dBm................................. 0 clients
    SNR   30 dBm................................. 0 clients
    SNR   35 dBm................................. 0 clients
    SNR   40 dBm................................. 0 clients
    SNR   45 dBm................................. 0 clients
  Nearby RADs
    RAD 00:0b:85:01:05:08 slot 0.................  -46 dBm on 10.1.30.170
    RAD 00:0b:85:01:12:65 slot 0.................  -24 dBm on 10.1.30.170
  Channel Assignment Information
    Current Channel Average Energy...............  -86 dBm
    Previous Channel Average Energy..............  -75 dBm
    Channel Change Count.........................  109
    Last Channel Change Time..................... Wed Sep 29 12:53e:34 2004
    Recommended Best Channel..................... 44
  RF Parameter Recommendations
    Power Level.................................. 1
    RTS/CTS Threshold............................ 2347
    Fragmentation Threshold...................... 2346
    Antenna Pattern.............................. 0

例

次に、AID 監査モードのステータスを表示する例を示します。

(Cisco Controller) > show ap aid-audit-mode
 Aid Audit Mode ................................. Disabled

例

次に、CCX 無線管理のステータスを表示する例を示します。

(Cisco Controller) >show ap ccx rm AP1240-21ac status
A Radio
Channel Load Request ..................... Disabled 
Noise Histogram Request .................. Disabled
Beacon Request ........................... Disabled
Frame Request ............................ Disabled
Interval ................................. 60
Iteration ................................ 10
G Radio
Channel Load Request ..................... Disabled 
Noise Histogram Request .................. Disabled
Beacon Request ........................... Disabled
Frame Request ............................ Disabled
Interval ................................. 60
Iteration ................................ 10

例

次に、すべてのアクセス ポイントの CDP ステータスを表示する例を示します。

(Cisco Controller) >show ap cdp all
AP CDP State
AP Name             AP CDP State
------------------  ----------
SB_RAP1              enable
SB_MAP1              enable
SB_MAP2              enable
SB_MAP3              enable

次に、指定したアクセス ポイントの CDP ステータスを表示する例を示します。

(Cisco Controller) >show ap cdp ap-name SB_RAP1
AP CDP State
AP Name             AP CDP State
------------------  ----------
AP CDP State.......................Enabled
AP Interface-Based CDP state
	Ethernet 0.....................Enabled
	Slot 0.........................Enabled
	Slot 1.........................Enabled

次に、CDP を使用するすべてのネイバーの詳細を表示する例を示します。

(Cisco Controller) >show ap cdp neighbor all
AP Name     AP IP            Neighbor Name       Neighbor IP      Neighbor Port
---------   ---------------  ------------------  --------------  -------------
SB_RAP1     192.168.102.154  sjc14-41a-sw1       192.168.102.2    GigabitEthernet1/0/13
SB_RAP1     192.168.102.154  SB_MAP1             192.168.102.137  Virtual-Dot11Radio0
SB_MAP1     192.168.102.137  SB_RAP1             192.168.102.154  Virtual-Dot11Radio0
SB_MAP1     192.168.102.137  SB_MAP2             192.168.102.138  Virtual-Dot11Radio0
SB_MAP2     192.168.102.138  SB_MAP1             192.168.102.137  Virtual-Dot11Radio1
SB_MAP2     192.168.102.138  SB_MAP3             192.168.102.139  Virtual-Dot11Radio0
SB_MAP3     192.168.102.139  SB_MAP2             192.168.102.138  Virtual-Dot11Radio1

次に、CDP を使用して指定したアクセス ポイントを持つ特定のネイバーの詳細を表示する例を示します。

(Cisco Controller) >show ap cdp neighbors ap-name SB_MAP2
AP Name      AP IP            Neighbor Name    Neighbor IP      Neighbor Port
-----------  ---------------  ---------------  --------------  -------------
SB_MAP2      192.168.102.138  SB_MAP1          192.168.102.137  Virtual-Dot11Radio1
SB_MAP2      192.168.102.138  SB_MAP3          192.168.102.139  Virtual-Dot11Radio0

次に、CDP を使用するネイバーの詳細を表示する例を示します。

(Cisco Controller) >show ap cdp neighbors detail SB_MAP2
AP Name:SB_MAP2
AP IP address:192.168.102.138
-------------------------
Device ID: SB_MAP1
Entry address(es): 192.168.102.137
Platform: cisco AIR-LAP1522AG-A-K9  ,  Cap
Interface: Virtual-Dot11Radio0,  Port ID (outgoing port): Virtual-Dot11Radio1
Holdtime : 180 sec
Version :
Cisco IOS Software, C1520 Software (C1520-K9W8-M), Experimental Version 12.4(200
81114:084420) [BLD-v124_18a_ja_throttle.20081114 208] Copyright (c) 1986-2008 by
 Cisco Systems, Inc. Compiled Fri 14-Nov-08 23:08 by
advertisement version: 2
-------------------------
Device ID: SB_MAP3
Entry address(es): 192.168.102.139
Platform: cisco AIR-LAP1522AG-A-K9  ,  Capabilities: Trans-Bridge
Interface: Virtual-Dot11Radio1,  Port ID (outgoing port): Virtual-Dot11Radio0
Holdtime : 180 sec
Version :
Cisco IOS Software, C1520 Software (C1520-K9W8-M), Experimental Version 12.4(200
81114:084420) [BLD-v124_18a_ja_throttle.20081114 208] Copyright (c) 1986-2008 by
 Cisco Systems, Inc. Compiled Fri 14-Nov-08 23:08 by
advertisement version: 2

例

次に、特定のアクセス ポイントの使用可能なチャネルを表示する例を示します。

(Cisco Controller) >show ap channel AP47
	802.11b/g Current Channel ...........1
Allowed Channel List.....................1,2,3,4,5,6,7,8,9,10,11
802.11a Current Channel .................161
Allowed Channel List.....................36,40,44,48,52,56,60,64,100,
.........................................104,108,112,116,132,136,140,
.........................................149,153,157,161

例

次に、アクセス ポイントの詳細設定を表示する例を示します。

(Cisco Controller) >show ap config 802.11a AP02
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP02
Country code..................................... US  - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 00:0b:85:18:b6:50
IP Address Configuration......................... DHCP
IP Address....................................... 1.100.49.240
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 1.100.49.1
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default-location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch............................. Cisco_32:ab:63
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch...........................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch............................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ........................................... Sniffer
Public Safety ..................................... Global: Disabled, Local: Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W  Version .................................... 7.0.110.6
Boot  Version ................................... 12.4.18.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Stats Re--More-- or (q)uit
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1142N-A-K9
AP Image......................................... C1140-K9W8-M
IOS Version...................................... 12.4(20100502:031212)
Reset Button..................................... Enabled
AP Serial Number................................. FTX1305S180
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 47 days, 23 h 47 m 47 s
AP LWAPP Up Time................................. 47 days, 23 h 10 m 37 s
Join Date and Time............................... Tue May  4 16:05:00 2010
Join Taken Time.................................. 0 days, 00 h 01 m 37 s
Attributes for Slot  1
    Radio Type................................... RADIO_TYPE_80211n-5
    Radio Subband................................ RADIO_SUBBAND_ALL
    Administrative State ........................ ADMIN_ENABLED
    Operation State ............................. UP
    Radio Role .................................. ACCESS
    CellId ...................................... 0
Station Configuration
      Configuration ............................. AUTOMATIC
      Number Of WLANs ........................... 2
      Medium Occupancy Limit .................... 100
      CFP Period ................................ 4
      CFP MaxDuration ........................... 60
      BSSID ..................................... 00:24:97:88:99:60
Operation Rate Set
        6000 Kilo Bits........................... MANDATORY
        9000 Kilo Bits........................... SUPPORTED
        12000 Kilo Bits.......................... MANDATORY
        18000 Kilo Bits.......................... SUPPORTED
        24000 Kilo Bits.......................... MANDATORY
        36000 Kilo Bits.......................... SUPPORTED
        48000 Kilo Bits.......................... SUPPORTED
        54000 Kilo Bits.......................... SUPPORTED
      MCS Set
        MCS 0.................................... SUPPORTED
        MCS 1.................................... SUPPORTED
        MCS 2.................................... SUPPORTED
        MCS 3.................................... SUPPORTED
        MCS 4.................................... SUPPORTED
        MCS 5.................................... SUPPORTED
        MCS 6.................................... SUPPORTED
        MCS 7.................................... SUPPORTED
        MCS 8.................................... SUPPORTED
        MCS 9.................................... SUPPORTED
        MCS 10................................... SUPPORTED
        MCS 11................................... SUPPORTED
        MCS 12................................... SUPPORTED
        MCS 13................................... SUPPORTED
        MCS 14................................... SUPPORTED
        MCS 15................................... SUPPORTED
      Beacon Period ............................. 100
      Fragmentation Threshold ................... 2346
      Multi Domain Capability Implemented ....... TRUE
      Multi Domain Capability Enabled ........... TRUE
      Country String ............................ US
Multi Domain Capability
      Configuration ............................. AUTOMATIC
      First Chan Num ............................ 36
      Number Of Channels ........................ 21
MAC Operation Parameters
      Configuration ............................. AUTOMATIC
      Fragmentation Threshold ................... 2346
      Packet Retry Limit ........................ 64
Tx Power
      Num Of Supported Power Levels ............. 6
      Tx Power Level 1 .......................... 14 dBm
      Tx Power Level 2 .......................... 11 dBm
      Tx Power Level 3 .......................... 8 dBm
      Tx Power Level 4 .......................... 5 dBm
      Tx Power Level 5 .......................... 2 dBm
      Tx Power Level 6 .......................... -1 dBm
      Tx Power Configuration .................... AUTOMATIC
      Current Tx Power Level .................... 0
Phy OFDM parameters
      Configuration ............................. AUTOMATIC
      Current Channel ........................... 36
      Extension Channel ......................... NONE
      Channel Width.............................. 20 Mhz
      Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
        ......................................... 104,108,112,116,132,136,140,
        ......................................... 149,153,157,161,165
      TI Threshold .............................. -50
      Legacy Tx Beamforming Configuration ....... AUTOMATIC
      Legacy Tx Beamforming ..................... DISABLED
      Antenna Type............................... INTERNAL_ANTENNA
      Internal Antenna Gain (in .5 dBi units).... 6
      Diversity.................................. DIVERSITY_ENABLED
      802.11n Antennas
        Tx
         A....................................... ENABLED
         B....................................... ENABLED
        Rx
         A....................................... ENABLED
         B....................................... ENABLED
         C....................................... ENABLED
Performance Profile Parameters
      Configuration ............................. AUTOMATIC
      Interference threshold..................... 10 %
      Noise threshold............................  -70 dBm
      RF utilization threshold................... 80 %
      Data-rate threshold........................ 1000000 bps
      Client threshold........................... 12 clients
      Coverage SNR threshold..................... 16 dB
      Coverage exception level................... 25 %
      Client minimum exception level............. 3 clients
Rogue Containment Information
    Containment Count............................ 0
CleanAir Management Information
        CleanAir Capable......................... No
Radio Extended Configurations:
        Buffer size ……………………….30
        Data-rate…………………………..0
        Beacon strt ………………………..90 ms
       Rx-Sensitivity SOP threshold ………….. -80 dB
       CCA threshold ……………………. -60 dB

次に、別のアクセス ポイントの詳細設定を表示する例を示します。

(Cisco Controller) >show ap config 802.11b AP02
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP02
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 00:0b:85:18:b6:50
IP Address Configuration......................... DHCP
IP Address....................................... 1.100.49.240
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 1.100.49.1
Cisco AP Location................................ default-location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch............................. Cisco_32:ab:63
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Remote AP Debug ................................. Disabled
S/W  Version .................................... 3.1.61.0
Boot  Version ................................... 1.2.59.6
Stats Reporting Period .......................... 180
LED State........................................ Enabled
ILP Pre Standard Switch.......................... Disabled
ILP Power Injector............................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AS-1200
AP Serial Number................................. 044110223A
AP Certificate Type.............................. Manufacture Installed
Attributes for Slot  1
    Radio Type................................... RADIO_TYPE_80211g
    Administrative State ........................ ADMIN_ENABLED
    Operation State ............................. UP
    CellId ...................................... 0
    Station Configuration
      Configuration ............................. AUTOMATIC
      Number Of WLANs ........................... 1
      Medium Occupancy Limit .................... 100
      CFP Period ................................ 4
      CFP MaxDuration ........................... 60
      BSSID ..................................... 00:0b:85:18:b6:50
      Operation Rate Set
        1000 Kilo Bits........................... MANDATORY
        2000 Kilo Bits........................... MANDATORY
        5500 Kilo Bits........................... MANDATORY
        11000 Kilo Bits.......................... MANDATORY
        6000 Kilo Bits........................... SUPPORTED
        9000 Kilo Bits........................... SUPPORTED
        12000 Kilo Bits.......................... SUPPORTED
        18000 Kilo Bits.......................... SUPPORTED
        24000 Kilo Bits.......................... SUPPORTED
        36000 Kilo Bits.......................... SUPPORTED
        48000 Kilo Bits.......................... SUPPORTED
        54000 Kilo Bits.......................... SUPPORTED
      Beacon Period ............................. 100
      DTIM Period ............................... 1
      Fragmentation Threshold ................... 2346
      Multi Domain Capability Implemented ....... TRUE
      Multi Domain Capability Enabled ........... TRUE
      Country String ............................ US
    Multi Domain Capability
      Configuration ............................. AUTOMATIC
      First Chan Num ............................ 1
      Number Of Channels ........................ 11
    MAC Operation Parameters
      Configuration ............................. AUTOMATIC
      RTS Threshold ............................. 2347
      Short Retry Limit ......................... 7
      Long Retry Limit .......................... 4
      Fragmentation Threshold ................... 2346
      Maximum Tx MSDU Life Time ................. 512
      Maximum Rx Life Time....................... 512
    Tx Power
      Num Of Supported Power Levels.............. 5
      Tx Power Level 1 .......................... 17 dBm
      Tx Power Level 2........................... 14 dBm
      Tx Power Level 3........................... 11 dBm
      Tx Power Level 4........................... 8 dBm
      Tx Power Level 5........................... 5 dBm
      Tx Power Configuration..................... CUSTOMIZED
      Current Tx Power Level..................... 5
    Phy OFDM parameters
      Configuration.............................. CUSTOMIZED
      Current Channel............................ 1
      TI Threshold............................... -50
      Legacy Tx Beamforming Configuration ....... CUSTOMIZED
      Legacy Tx Beamforming ..................... ENABLED
      Antenna Type............................... INTERNAL_ANTENNA
      Internal Antenna Gain (in5 dBm units)...... 11
      Diversity.................................. DIVERSITY_ENABLED
    Performance Profile Parameters
      Configuration.............................. AUTOMATIC
      Interference threshold..................... 10%
      Noise threshold............................  -70 dBm
      RF utilization threshold................... 80%
      Data-rate threshold........................ 1000000 bps
      Client threshold........................... 12 clients
      Coverage SNR threshold..................... 12 dB
      Coverage exception level................... 25%
      Client minimum exception level............. 3 clients
    Rogue Containment Information
    Containment Count............................ 0

次に、Cisco アクセス ポイントの一般的な設定を表示する例を示します。

(Cisco Controller) >show ap config general cisco-ap
Cisco AP Identifier.............................. 9
Cisco AP Name.................................... cisco-ap
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. 802.11bg:-A 802.11a:-A
Switch Port Number .............................. 1
MAC Address...................................... 12:12:12:12:12:12
IP Address Configuration......................... DHCP
IP Address....................................... 10.10.10.21
IP NetMask....................................... 255.255.255.0
CAPWAP Path MTU.................................. 1485
Domain...........................................
Name Server......................................
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ 4404
Primary Cisco Switch IP Address.................. 10.10.10.32
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name....................... 4404
Tertiary Cisco Switch IP Address................. 3.3.3.3
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Global: Disabled, Local: Disabled
AP subMode ...................................... WIPS
Remote AP Debug ................................. Disabled
S/W  Version .................................... 5.1.0.0
Boot  Version ................................... 12.4.10.0
Mini IOS Version ................................ 0.0.0.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Low Power (degraded mode)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
IOS Version...................................... 12.4(10:0)
Reset Button..................................... Enabled
AP Serial Number................................. serial_number
AP Certificate Type.............................. Manufacture Installed
Management Frame Protection Validation........... Enabled (Global MFP Disabled)
AP User Mode..................................... CUSTOMIZED
AP username..................................... maria
AP Dot1x User Mode............................... Not Configured
AP Dot1x username............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 4 days, 06 h 17 m 22 s
AP LWAPP Up Time................................. 4 days, 06 h 15 m 00 s
Join Date and Time............................... Mon Mar 3 06:19:47 2008
Ethernet Port Duplex............................. Auto
Ethernet Port Speed.............................. Auto
AP Link Latency.................................. Enabled
 Current Delay................................... 0 ms
 Maximum Delay................................... 240 ms
 Minimum Delay................................... 0 ms
 Last updated (based on AP Up Time).............. 4 days, 06 h 17 m 20 s
Rogue Detection.................................. Enabled
AP TCP MSS Adjust................................ Disabled
Mesh preferred parent............................ 00:24:13:0f:92:00

例

次に、AP 固有のサーバ設定を表示する例を示します。

ap_console >show ap config general APc89c.1d53.6799
Cisco AP Identifier.............................. 76
Cisco AP Name.................................... APc89c.1d53.6799
Country code..................................... Multiple Countries:IN,JP,US
Regulatory Domain allowed by Country............. 802.11bg:-AJPU 802.11a:-AJN
AP Country code.................................. US - United States
AP Regulatory Domain............................. 802.11bg:-A 802.11a:-A
Switch Port Number .............................. 1
MAC Address...................................... c8:9c:1d:53:67:99
IP Address Configuration......................... DHCP
IP Address....................................... 10.8.77.103
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.8.77.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Globally Disabled
Ssh State........................................ Globally Disabled
Cisco AP Location................................ default location
Cisco AP Floor Label............................. 0
Cisco AP Group Name.............................. apGroup2
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... system
S/W  Version .................................... 8.0.72.132
Boot  Version ................................... 12.4.23.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Stats Collection Mode ........................... normal
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Full Power
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1142N-A-K9
AP Image......................................... C1140-K9W8-M
IOS Version...................................... 15.3(20140302:180954)$
Reset Button..................................... Enabled
AP Serial Number................................. FGL1510S3VZ
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... cisco
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 18 h 43 m 35 s
AP LWAPP Up Time................................. 0 days, 18 h 42 m 23 s
Join Date and Time............................... Wed Mar  5 07:26:07 2014
Join Taken Time.................................. 0 days, 00 h 01 m 11 s
Memory Type...................................... DDR3
Memory Size...................................... 98294 KBytes
CPU Type......................................... PowerPC405ex CPU at 586Mhz, revision number 0x147E
Flash Type....................................... Onboard Flash
Flash Size....................................... 31374 KBytes
GPS Present...................................... NO
Ethernet Vlan Tag................................ Disabled
Ethernet Port Duplex............................. Auto
Ethernet Port Speed.............................. Auto
AP Link Latency.................................. Disabled
Rogue Detection.................................. Enabled
AP TCP MSS Adjust................................ Disabled
Hotspot Venue Group.............................. Unspecified
Hotspot Venue Type............................... Unspecified
DNS server IP ............................. Not Available

例

次に、グローバル syslog サーバ設定を表示する例を示します。

(Cisco Controller) >show ap config global 
AP global system logging host.............................. 255.255.255.255

例

次に、メモリ コア ダンプ情報を表示する例を示します。

(Cisco Controller) >show ap core-dump AP02
Memory core dump is disabled.

例

次に、アクセス ポイントで生成されたクラッシュ ファイルを表示する例を示します。

(Cisco Controller) >show ap crash-file

例

次に、すべてのアクセス ポイントのデータ プレーンのステータスを表示する例を示します。

(Cisco Controller) >show ap data-plane all
Min Data          Data          Max Data     Last
AP Name               Round Trip      Round Trip      Round Trip    Update
------------------  --------------  --------------  --------------  ------
1130                       0.000s          0.000s       0.002s     18:51:23
1240                       0.000s          0.000s       0.000s     18:50:45

例

次に、DTLS 暗号スイート情報を表示する例を示します。

(Cisco Controller) > show ap dtls-cipher-suite
DTLS Cipher Suite................................ RSA-AES256-SHA

例

次に、コントローラに関連付けられているすべてのアクセス ポイントの VLAN タギング情報を表示する例を示します。

(Cisco Controller) >show ap ethernet tag summary

AP Name              Vlan Tag Configuration
------------------   -------
AP2                  7  (Failover to untagged)
charan.AP1140.II     disabled

例

次に、アクセス ポイントのイベント ログを表示する例を示します。

(Cisco Controller) >show ap eventlog ciscoAP
AP event log download has been initiated
Waiting for download to complete
AP event log download completed.
======================= AP Event log Contents =====================
*Feb 13 11:54:17.146: %CAPWAP-3-CLIENTEVENTLOG: AP event log has been cleared from the contoller 'admin'
*Feb 13 11:54:32.874: *** Access point reloading. Reason: Reload Command ***
*Mar 1 00:00:39.134: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:39.174: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:39.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:49.947: %CAPWAP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.
...

例

次に、アクセス ポイントのインベントリを表示する例を示します。

(Cisco Controller) >show ap inventory test101
NAME: "test101"    , DESCR: "Cisco Wireless Access Point"
PID: AIR-LAP1131AG-A-K9  ,  VID: V01,  SN: FTX1123T2XX

例

次に、コントローラを結合しようとする特定のアクセス ポイントの結合情報を表示する例を示します。

(Cisco Controller) >show ap join stats detailed 00:0b:85:02:0d:20
Discovery phase statistics
- Discovery requests received.......................... 2
- Successful discovery responses sent.................. 2
- Unsuccessful discovery request processing............ 0
- Reason for last unsuccessful discovery attempt....... Not applicable
- Time at last successful discovery attempt............ Aug 21 12:50:23:335
- Time at last unsuccessful discovery attempt.......... Not applicable
Join phase statistics
- Join requests received............................... 1
- Successful join responses sent....................... 1
- Unsuccessful join request processing................. 1
- Reason for last unsuccessful join attempt.............RADIUS authorization is pending for the AP
- Time at last successful join attempt................. Aug 21 12:50:34:481
- Time at last unsuccessful join attempt............... Aug 21 12:50:34:374
Configuration phase statistics
- Configuration requests received...................... 1
- Successful configuration responses sent.............. 1
- Unsuccessful configuration request processing........ 0
- Reason for last unsuccessful configuration attempt... Not applicable
- Time at last successful configuration attempt........ Aug 21 12:50:34:374
- Time at last unsuccessful configuration attempt...... Not applicable
Last AP message decryption failure details
- Reason for last message decryption failure........... Not applicable
Last AP disconnect details
- Reason for last AP connection failure................ Not applicable
Last join error summary
- Type of error that occurred last..................... Lwapp join request rejected
- Reason for error that occurred last.................. RADIUS authorization is pending for the AP
- Time at which the last join error occurred........... Aug 21 12:50:34:374

例

次に、アクセス ポイントの特定の結合情報を表示する例を示します。

(Cisco Controller) >show ap join stats summary 00:0b:85:02:0d:20
Is the AP currently connected to controller.......................... No
Time at which the AP joined this controller last time................ Aug 21 12:50:36:061
Type of error that occurred last..................................... Lwapp join request rejected
Reason for error that occurred last.................................. RADIUS authorization is pending for the AP
Time at which the last join error occurred........................... Aug 21 12:50:34:374

例

次に、すべてのアクセス ポイントの結合情報のサマリーを表示する例を示します。

(Cisco Controller) >show ap join stats summary all 
Number of APs.............................................. 4
Base Mac             AP EthernetMac         AP Name         IP Address         Status
00:0b:85:57:bc:c0     00:0b:85:57:bc:c0     AP1130         10.10.163.217     Joined
00:1c:0f:81:db:80     00:1c:63:23:ac:a0     AP1140         10.10.163.216     Not joined
00:1c:0f:81:fc:20     00:1b:d5:9f:7d:b2     AP1             10.10.163.215     Joined
00:21:1b:ea:36:60     00:0c:d4:8a:6b:c1     AP2             10.10.163.214     Not joined

例

次に、すべてのアクセス ポイントの LED の状態を取得する例を示します。

(Cisco Controller) >show ap led-state all
Global LED State: Enabled (default)

例

次に、アクセス ポイントの LED フラッシュ ステータスを表示する例を示します。

(Cisco Controller) >show ap led-flash

例

次に、すべてのアクセス ポイントのリンク暗号化ステータスを表示する例を示します。

(Cisco Controller) >show ap link-encryption all
             Encryption  Dnstream  Upstream    Last
AP Name           State     Count     Count  Update
------------------  ---  --------  --------  ------
1240                Dis      4406    237553   Never
1130                 En      2484    276308   19:31

例

次に、show ap max-count summary コマンドの出力例を示します。

(Cisco Controller) >show ap max-count

The max number of AP's supported................. 500

例

次に、チャネルに最適化された監視モードの現在の設定を表示する例を示します。

(Cisco Controller) >show ap monitor-mode summary
AP Name            Ethernet MAC       Status     Scanning Channel List
---  -----------------  ---------- ----------------------
AP_004             xx:xx:xx:xx:xx:xx Tracking    1, 6, 11, 4

例

次に、アクセス ポイントのパケット キャプチャ設定を表示する例を示します。

(Cisco Controller) >show ap packet-dump status 
Packet Capture Status............................ Stopped
FTP Server IP Address............................ 0.0.0.0
FTP Server Path..................................
FTP Server Username..............................
FTP Server Password.............................. ********
Buffer Size for Capture.......................... 2048 KB
Packet Capture Time.............................. 45 Minutes
Packet Truncate Length........................... Unspecified
Packet Capture Classifier........................ None

例

次に、ネットワーク上のすべてのアクセス ポイントの制御パケット再送信パラメータを表示する例を示します。

(Cisco Controller) >show ap retransmit all
Global control packet retransmit interval: 3 (default)
Global control packet retransmit count: 5 (default)
AP Name             Retransmit Interval  Retransmit count
------------------  -------------------  -------------------
AP_004                   3 (default)      5 (WLC default),5 (AP default)

例

次に、802.11b ネットワークのアクセス ポイントの統計情報を表示する例を示します。

(Cisco Controller) >show ap stats 802.11a Ibiza

Number Of Slots.................................. 2
AP Name.......................................... Ibiza
MAC Address...................................... 44:2b:03:9a:8a:73
Radio Type....................................... RADIO_TYPE_80211a
Stats Information
  Number of Users................................ 0
  TxFragmentCount................................ 84628
  MulticastTxFrameCnt............................ 84628
  FailedCount.................................... 0
  RetryCount..................................... 0
  MultipleRetryCount............................. 0
  FrameDuplicateCount............................ 0
  RtsSuccessCount................................ 1
  RtsFailureCount................................ 0
  AckFailureCount................................ 0
  RxIncompleteFragment........................... 0
  MulticastRxFrameCnt............................ 0
  FcsErrorCount.................................. 20348857
  TxFrameCount................................... 84628
  WepUndecryptableCount.......................... 19907
  TxFramesDropped................................ 0
OEAP WMM Stats :
  Best Effort:
    Tx Frame Count............................... 0
    Tx Failed Frame Count........................ 0
    Tx Expired Count............................. 0
    Tx Overflow Count............................ 0
    Tx Queue Count............................... 0
    Tx Queue Max Count........................... 0
    Rx Frame Count............................... 0
    Rx Failed Frame Count........................ 0
  Background:
    Tx Frame Count............................... 0
    Tx Failed Frame Count........................ 0
    Tx Expired Count............................. 0
    Tx Overflow Count............................ 0
    Tx Queue Count............................... 0
    Tx Queue Max Count........................... 0
    Rx Frame Count............................... 0
    Rx Failed Frame Count........................ 0
  Video:
    Tx Frame Count............................... 0
    Tx Failed Frame Count........................ 0
    Tx Expired Count............................. 0
    Tx Overflow Count............................ 0
    Tx Queue Count............................... 0
    Tx Queue Max Count........................... 0
    Rx Frame Count............................... 0
    Rx Failed Frame Count........................ 0
  Voice:
    Tx Frame Count............................... 0
    Tx Failed Frame Count........................ 0
    Tx Expired Count............................. 0
    Tx Overflow Count............................ 0
    Tx Queue Count............................... 0
    Tx Queue Max Count........................... 0
    Rx Frame Count............................... 0
    Rx Failed Frame Count........................ 0

Rate Limiting Stats:
  Wlan 1:
    Number of Data Packets Received.............. 592
    Number of Data Rx Packets Dropped............ 160
    Number of Data Bytes Received................ 160783
    Number of Data Rx Bytes Dropped.............. 0
    Number of Realtime Packets Received.......... 592
    Number of Realtime Rx Packets Dropped........ 0
    Number of Realtime Bytes Received............ 160783
    Number of Realtime Rx Bytes Dropped.......... 0
    Number of Data Packets Sent.................. 131
    Number of Data Tx Packets Dropped............ 0
    Number of Data Bytes Sent.................... 23436
    Number of Data Tx Bytes Dropped.............. 0
    Number of Realtime Packets Sent.............. 131
    Number of Realtime Tx Packets Dropped........ 0
    Number of Realtime Bytes Sent................ 23436
    Number of Realtime Tx Bytes Dropped.......... 0
Call Admission Control (CAC) Stats
  Voice Bandwidth in use(% of config bw)......... 0
  Voice Roam Bandwidth in use(% of config bw).... 0
    Total channel MT free........................ 0
    Total voice MT free.......................... 0
    Na Direct.................................... 0
    Na Roam...................................... 0
  Video Bandwidth in use(% of config bw)......... 0
  Video Roam Bandwidth in use(% of config bw).... 0
  Total BW in use for Voice(%)................... 0
  Total BW in use for SIP Preferred call(%)...... 0
WMM TSPEC CAC Call Stats
  Total num of voice calls in progress........... 0
  Num of roaming voice calls in progress......... 0
  Total Num of voice calls since AP joined....... 0
  Total Num of roaming calls since AP joined..... 0
  Total Num of exp bw requests received.......... 0
  Total Num of exp bw requests admitted.......... 0
  Num of voice calls rejected since AP joined.... 0
  Num of roam calls rejected since AP joined..... 0
  Num of calls rejected due to insufficent bw.... 0
  Num of calls rejected due to invalid params.... 0
  Num of calls rejected due to PHY rate.......... 0
  Num of calls rejected due to QoS policy........ 0
SIP CAC Call Stats
  Total Num of calls in progress................. 0
  Num of roaming calls in progress............... 0
  Total Num of calls since AP joined............. 0
  Total Num of roaming calls since AP joined..... 0
  Total Num of Preferred calls received.......... 0
  Total Num of Preferred calls accepted.......... 0
  Total Num of ongoing Preferred calls........... 0
  Total Num of calls rejected(Insuff BW)......... 0
  Total Num of roam calls rejected(Insuff BW).... 0
WMM Video TSPEC CAC Call Stats
  Total num of video calls in progress........... 0
  Num of roaming video calls in progress......... 0
  Total Num of video calls since AP joined....... 0
  Total Num of video roaming calls since AP j.... 0
  Num of video calls rejected since AP joined.... 0
  Num of video roam calls rejected since AP j.... 0
  Num of video calls rejected due to insuffic.... 0
  Num of video calls rejected due to invalid .... 0
  Num of video calls rejected due to PHY rate.... 0
  Num of video calls rejected due to QoS poli.... 0
SIP Video CAC Call Stats
  Total Num of video calls in progress........... 0
  Num of video roaming calls in progress......... 0
  Total Num of video calls since AP joined....... 0
  Total Num of video roaming calls since AP j.... 0
  Total Num of video calls rejected(Insuff BW.... 0
  Total Num of video roam calls rejected(Insu.... 0
Band Select Stats
  Num of dual band client ....................... 0
  Num of dual band client added.................. 0
  Num of dual band client expired ............... 0
  Num of dual band client replaced............... 0
  Num of dual band client detected .............. 0
  Num of suppressed client ...................... 0
  Num of suppressed client expired............... 0
  Num of suppressed client replaced.............. 0

例

次に、接続されているすべてのアクセス ポイントの要約を表示する例を示します。

(Cisco Controller) >show ap summary
Number of APs.................................... 2
Global AP username.............................. user
Global AP Dot1x username........................ Not Configured
Number of APs.................................... 2
Global AP username.............................. user
Global AP Dot1x username........................ Not Configured


 AP Name             Slots  AP Model              Ethernet MAC       Location          Country  IP Address       Clients
------------------  -----  --------------------  -----------------  ----------------  -------  ---------------  -------
AP1140               2     AIR-LAP1142N-A-K9     f0:f7:55:75:f3:29                default location         US   192.168.0.0         0
Access Points using IPv6 transport:
 AP Name    Slots   AP Model           Ethernet MAC       Location         Country     IPv6 Address                 Clients
 ------------------ ----- ------------------------------------- ------------ ------------------ ----- ---------------------------- ------
 AP1040      2    AIR-LAP1042N-A-K9   00:40:96:b9:4b:89   default location  US       2001:DB8:0:1::1                     0

例

次に、すべてのアクセス ポイントの Transmission Control Protocol（TCP）の最大セグメント サイズ（MSS）の情報を表示する例を示します。

(Cisco Controller) >show ap tcp-mss-adjust all
AP Name            TCP State MSS Size
------------------ --------- -------
AP-1140            enabled   536
AP-1240            disabled  -
AP-1130            disabled  -

例

次に、802.11b ネットワークのアクセス ポイントの BSSID を表示する例を示します。

(Cisco Controller) >show ap wlan 802.11b AP01
Site Name........................................ MY_AP_GROUP1
Site Description................................. MY_AP_GROUP1
WLAN ID          Interface          BSSID
-------         -----------        --------------------------
1               management           00:1c:0f:81:fc:20
2               dynamic              00:1c:0f:81:fc:21

例

次に、経由ローミングと 802.11k 設定を表示する例を示します。

(Cisco Controller) >show assisted-roaming
Assisted Roaming and 80211k Information:
Floor RSSI Bias.................................. 15 dBm
Maximum Denial................................... 2 counts
Minimium Optimized Neighbor Assigned............. 2 neighbors

Assisted Roaming Performance Chart:
Matching Assigned Neighbor....................... [0] = 0
Matching Assigned Neighbor....................... [1] = 0
Matching Assigned Neighbor....................... [2] = 0
Matching Assigned Neighbor....................... [3] = 0
Matching Assigned Neighbor....................... [4] = 0
Matching Assigned Neighbor....................... [5] = 0
Matching Assigned Neighbor....................... [6] = 0
Matching Assigned Neighbor....................... [7] = 0
No Matching Neighbor............................. [8] = 0
No Neighbor Assigned............................. [9] = 0

例

次に、Cisco Airtime Fairness の設定を監視する例を示します。

(Cisco Controller) >show atf config all

例

次に、Cisco Airtime Fairness の統計情報を監視する例を示します。

(Cisco Controller) >show atf statistics ap Ap01323 802.11a summary

例

次に、アクセス ポイントの認証リストを表示する例を示します。

(Cisco Controller) >show auth-list
Authorize APs against AAA...................... disabled
Allow APs with Self-signed Certificate (SSC)... disabled
Mac Addr                  Cert Type    Key Hash
-----------------------   ----------   ------------------------------------------
xx:xx:xx:xx:xx:xx         MIC

例

次に、show avc applications コマンドの出力例を示します。

(Cisco Controller) > show avc applications

Application-Name           App-ID  Engine-ID  Selector-ID   Application-Group-Name
 ================           ======  =========  ===========   ======================
 3com-amp3                    538        3       629        other
 3com-tsmux                   977        3       106        obsolete
 3pc                          788        1        34        layer3-over-ip
 914c/g                      1109        3       211        net-admin
 9pfs                         479        3       564        net-admin
 acap                         582        3       674        net-admin
 acas                         939        3        62        other
 accessbuilder                662        3       888        other
 accessnetwork                607        3       699        other
 acp                          513        3       599        other
 acr-nema                     975        3       104        industrial-protocols
 active-directory            1194       13       473        other
 activesync                  1419       13       490        business-and-productivity-tools
 adobe-connect               1441       13       505        other
 aed-512                      963        3       149        obsolete
 afpovertcp                  1327        3       548        business-and-productivity-tools
 agentx                       609        3       705        net-admin
 alpes                        377        3       463        net-admin
 aminet                       558        3      2639        file-sharing
 an                           861        1       107        layer3-over-ip
----				                     ----       ---     -----       -------------

例

次に、show avc profile summary コマンドの出力例を示します。

(Cisco Controller) > show avc profile summary

 Profile-Name                      Number of Rules
  ============                      ==============
  profile	1                                 3
  avc_profile2                              1

次に、show avc profile detailed コマンドの出力例を示します。

(Cisco Controller) > show avc profile detailed

  Application-Name          Application-Group-Name            Action  DSCP
  ================          =======================           ======  ====
  ftp                       file-sharing                       Drop      -
  flash-video               browsing                           Mark     10
  facebook                  browsing                           Mark     10

  Associated WLAN IDs       :
  Associated Remote LAN IDs :
  Associated Guest LAN IDs  :

例

次に、show avc statistics application コマンドの出力例を示します。

(Cisco Controller) > show avc statistics application ftp top-users downstream wlan 1

  Client MAC            Client IP        WLAN ID  Packets   Bytes   Avg Pkt  Packets    Bytes       DSCP
  (Up/Down)                                       (n secs) (n secs)  Size    (Total)    (Total)   In  Out
  ===========           =========        ======   =======  =======  ======   =======    =======   === ===
  00:0a:ab:15:00:9c(U) 172.16.31.156        1         16        91     5         43         338     0   0
                   (D) 172.16.31.156        1         22      5911   268         48        6409     0   0
  00:0a:ab:15:00:5a(U) 172.16.31.90         1          7        39     5         13          84     0   0
                   (D) 172.16.31.90         1         12      5723   476         18        5869     0   0
  00:0a:ab:15:00:60(U) 172.16.31.96         1         19       117     6         75        8666     0   0
                   (D) 172.16.31.96         1         19      4433   233         83        9595     0   0
  00:0a:ab:15:00:a4(U) 172.16.31.164        1         18       139     7         21         161     0   0
                   (D) 172.16.31.164        1         23      4409   191         24        4439     0   0
  00:0a:ab:15:00:48(U) 172.16.31.72         1         21      2738   130         21        2738     0   0
                   (D) 172.16.31.72         1         22      4367   198         22        4367     0   0
  00:0a:ab:15:00:87(U) 172.16.31.135        1         11        47     4         49         301     0   0
                   (D) 172.16.31.135        1         12      4208   350         48        7755     0   0
  00:0a:ab:15:00:92(U) 172.16.31.146        1         10        73     7         11          84     0   0
                   (D) 172.16.31.146        1          9      4168   463         11        4201     0   0
  00:0a:ab:15:00:31(U) 172.16.31.49         1         11        95     8         34         250     0   0
                   (D) 172.16.31.49         1         18      3201   177         43        3755     0   0
  00:0a:ab:15:00:46(U) 172.16.31.70         1          7        47     6         20         175     0   0
                   (D) 172.16.31.70         1         10      3162   316         23        3448     0   0
  00:0a:ab:15:00:b3(U) 172.16.31.179        1         10        85     8         34         241     0   0

例

次に、show avc statistics client コマンドの出力例を示します。

(Cisco Controller) > show avc statistics client 00:0a:ab:15:00:01 application http  

 Description                   Upstream      Downstream
  ===========                   ========      ==========
  Number of Packtes(n secs)         5059            6369
  Number of Bytes(n secs)         170144         8655115
  Average Packet size(n secs)         33            1358
  Total Number of Packtes         131878          150169
  Total Number of Bytes          6054464       205239972
  DSCP Incoming packet                16               0
  DSCP Outgoing Packet                16               0

次に、show avc statistics client コマンドの出力例を示します。

(Cisco Controller) > show avc statistics client 00:0a:ab:15:00:01 top-apps

  Application-Name           Packets   Bytes    Avg Pkt  Packets    Bytes    DSCP DSCP
      (Up/Down)              (n secs)  (n secs)  Size    (Total)   (Total)    In   Out
  ================           =======   ======   ======   =======   ======    ====  ====
  http                    (U)    6035   637728    105      6035     637728    16    16
                          (D)    5420  7218796   1331      5420    7218796     0     0
  ggp                     (U)    1331  1362944   1024      1331    1362944     0     0
                          (D)       0        0      0         0          0     0     0
  smp                     (U)    1046  1071104   1024      1046    1071104     0     0
                          (D)       0        0      0         0          0     0     0
  vrrp                    (U)     205   209920   1024       205     209920     0     0
                          (D)       0        0      0         0          0     0     0
  bittorrent              (U)     117     1604     13       117       1604     0     0
                          (D)     121    70469    582       121      70469     0     0
  icmp                    (U)       0        0      0         0          0     0     0
                          (D)      72    40032    556        72      40032    48    48
  edonkey                 (U)     112     4620     41       112       4620     0     0
                          (D)     105    33076    315       105      33076     0     0
  dns                     (U)      10      380     38        10        380     0     0
                          (D)       7     1743    249         7       1743     0     0
  realmedia               (U)       2      158     79         2        158    24    24
                          (D)       2       65     32         2         65     0     0

例

次に、show avc statistics コマンドの出力例を示します。

(Cisco Controller) > show avc statistics guest-lan 1

 Application-Name            Packets   Bytes   Avg Pkt  Packets      Bytes
   (Up/Down)                 (n secs) (n secs)  Size    (Total)      (Total)
 ================            =======  ======    ======   ======      =======
 unclassified            (U)  191464    208627     1    92208613  11138796586
                         (D)  63427  53440610   842    16295621   9657054635
 ftp                     (U)    805     72880    90      172939     11206202
                         (D)    911     58143    63      190900     17418653
 http                    (U)  264904  12508288    47    27493945   2837672192
                         (D)  319894  436915253  1365    29850934  36817587924
 gre                     (U)      0         0     0    10158872  10402684928
                         (D)      0         0     0           0            0
 icmp                    (U)      1        40    40         323        98476
                         (D)   7262   4034576   555     2888266   1605133372
 ipinip                  (U)  62565  64066560  1024    11992305  12280120320
                         (D)      0         0     0           0            0
 imap                    (U)   1430     16798    11      305161      3795766
                         (D)   1555    576371   370      332290    125799465
 irc                     (U)      9        74     8        1736         9133
                         (D)     11       371    33        1972       173381
 nntp                    (U)     22       158     7        1705         9612
                         (D)     22       372    16        2047       214391

例

次に、show avc statistics remote-lan コマンドの出力例を示します。

(Cisco Controller) > show avc statistics remote-lan 1

 Application-Name            Packets   Bytes   Avg Pkt  Packets      Bytes
   (Up/Down)                 (n secs) (n secs)  Size    (Total)      (Total)
 ================            =======  ======    ======   ======      =======
 unclassified            (U)  191464    208627     1    92208613  11138796586
                         (D)  63427  53440610   842    16295621   9657054635
 ftp                     (U)    805     72880    90      172939     11206202
                         (D)    911     58143    63      190900     17418653
 http                    (U)  264904  12508288    47    27493945   2837672192
                         (D)  319894  436915253  1365    29850934  36817587924
 gre                     (U)      0         0     0    10158872  10402684928
                         (D)      0         0     0           0            0
 icmp                    (U)      1        40    40         323        98476
                         (D)   7262   4034576   555     2888266   1605133372
 ipinip                  (U)  62565  64066560  1024    11992305  12280120320
                         (D)      0         0     0           0            0
 imap                    (U)   1430     16798    11      305161      3795766
                         (D)   1555    576371   370      332290    125799465
 irc                     (U)      9        74     8        1736         9133
                         (D)     11       371    33        1972       173381
 nntp                    (U)     22       158     7        1705         9612
                         (D)     22       372    16        2047       214391

例

次に、show avc statistics top-aps コマンドの出力例を示します。

(Cisco Controller) > show avc statistics top-apps

 Application-Name             Packets     Bytes   Avg Pkt     Packets         Bytes
    (Up/Down)                 (n secs)   (n secs)  Size       (Total)        (Total)
 ================             =======    =======  =======     =======        ========
 http                    (U)   204570   10610912     51      28272539      2882294016
                         (D)   240936  327624221   1359      30750570     38026889010
 realmedia               (U)      908      62154     68        400698        26470359
                         (D)   166694  220522943   1322      35802836     47131836785
 mpls-in-ip              (U)    77448   79306752   1024      10292787     10539813888
                         (D)        0          0      0             0               0
 fire                    (U)    70890   72591360   1024      10242484     10488303616
                         (D)        0          0      0             0               0
 pipe                    (U)    68296   69935104   1024      10224255     10469637120
                         (D)        0          0      0             0               0
 gre                     (U)    60982   62445568   1024      10340221     10588386304
                         (D)        0          0      0             0               0
 crudp                   (U)    26430   27064320   1024      10109812     10352447488
                         (D)        0          0      0             0               0
 rtp                     (U)        0          0      0             0               0
                         (D)     7482    9936096   1328       2603923      3458009744
 icmp                    (U)        0          0      0           323           98476
                         (D)    10155    5640504    555       2924693      1625363564

例

次に、show avc statistics コマンドの出力例を示します。

(Cisco Controller) >show avc statistics wlan 1

 Application-Name            Packets   Bytes   Avg Pkt  Packets      Bytes
   (Up/Down)                 (n secs) (n secs)  Size    (Total)      (Total)
 ================            =======  ======    ======   ======      =======
 unclassified            (U)  191464    208627     1    92208613  11138796586
                         (D)  63427  53440610   842    16295621   9657054635
 ftp                     (U)    805     72880    90      172939     11206202
                         (D)    911     58143    63      190900     17418653
 http                    (U)  264904  12508288    47    27493945   2837672192
                         (D)  319894  436915253  1365    29850934  36817587924
 gre                     (U)      0         0     0    10158872  10402684928
                         (D)      0         0     0           0            0
 icmp                    (U)      1        40    40         323        98476
                         (D)   7262   4034576   555     2888266   1605133372
 ipinip                  (U)  62565  64066560  1024    11992305  12280120320
                         (D)      0         0     0           0            0
 imap                    (U)   1430     16798    11      305161      3795766
                         (D)   1555    576371   370      332290    125799465
 irc                     (U)      9        74     8        1736         9133
                         (D)     11       371    33        1972       173381
 nntp                    (U)     22       158     7        1705         9612
                         (D)     22       372    16        2047       214391

次に、show avc statistics wlan コマンドの出力例を示します。

(Cisco Controller) >show avc statistics wlan 1 application ftp

 Description                     Upstream    Downstream
  ===========                     ========    ==========
  Number of Packtes(n secs)              0             0
  Number of Bytes(n secs)                0             0
  Average Packet size(n secs)            0             0
  Total Number of Packtes            32459         64888
  Total Number of Bytes                274      94673983

例

次に、show boot コマンドの出力例を示します。

(Cisco Controller) > show boot
Primary Boot Image............................... 3.2.13.0 (active)
Backup Boot Image................................ 3.2.15.0

例

次に、show band-select コマンドの出力例を示します。

(Cisco Controller) > show band-select
Band Select Probe Response....................... per WLAN enabling
   Cycle Count................................... 3 cycles
   Cycle Threshold............................... 200 milliseconds
   Age Out Suppression........................... 20 seconds
   Age Out Dual Band............................. 60 seconds
   Client RSSI................................... -80 dBm

例

次に、show buffers コマンドの出力例を示します。

(Cisco Controller) > show buffers
Pool[00]: 16 byte chunks
    chunks in pool:    50000
    chunks in use:     9196
    bytes in use:      147136
    bytes requested:   73218 (73918 overhead bytes)
Pool[01]: 64 byte chunks
    chunks in pool:    50100
    chunks in use:     19222
    bytes in use:      1230208
    bytes requested:   729199 (501009 overhead bytes)
Pool[02]: 128 byte chunks
    chunks in pool:    26200
    chunks in use:     9861
    bytes in use:      1262208
    bytes requested:   848732 (413476 overhead bytes)
Pool[03]: 256 byte chunks
    chunks in pool:    3000
    chunks in use:     596
    bytes in use:      152576
    bytes requested:   93145 (59431 overhead bytes)
Pool[04]: 384 byte chunks
    chunks in pool:    6000
    chunks in use:     258
    bytes in use:      99072
    bytes requested:   68235 (30837 overhead bytes)
Pool[05]: 512 byte chunks
    chunks in pool:    18700
    chunks in use:     18667
    bytes in use:      9557504
    bytes requested:   7933814 (1623690 overhead bytes)
Pool[06]: 1024 byte chunks
    chunks in pool:    3500
    chunks in use:     94
    bytes in use:      96256
    bytes requested:   75598 (20658 overhead bytes)
Pool[07]: 2048 byte chunks
    chunks in pool:    1000
    chunks in use:     54
    bytes in use:      110592
    bytes requested:   76153 (34439 overhead bytes)
Pool[08]: 4096 byte chunks
    chunks in pool:    1000
    chunks in use:     47
    bytes in use:      192512
    bytes requested:   128258 (64254 overhead bytes)
Raw Pool:
    chunks in use:     256
    bytes requested:   289575125

例

次に、show cac voice stats 802.11b コマンドの出力例を示します。

(Cisco Controller) > show cac voice stats 802.11b

WLC Voice Call Statistics for 802.11b Radio

WMM TSPEC CAC Call Stats
  Total num of Calls in progress................. 0
  Num of Roam Calls in progress.................. 0
  Total Num of Calls Admitted.................... 0
  Total Num of Roam Calls Admitted............... 0
  Total Num of exp bw requests received.......... 0
  Total Num of exp bw requests Admitted.......... 0
  Total Num of Calls Rejected.................... 0
  Total Num of Roam Calls Rejected............... 0
  Num of Calls Rejected due to insufficent bw.... 0
  Num of Calls Rejected due to invalid params.... 0
  Num of Calls Rejected due to PHY rate.......... 0
  Num of Calls Rejected due to QoS policy........ 0
SIP CAC Call Stats
  Total Num of Calls in progress................. 0
  Num of Roam Calls in progress.................. 0
  Total Num of Calls Admitted.................... 0
  Total Num of Roam Calls Admitted............... 0
  Total Num of Preferred Calls Received.......... 0
  Total Num of Preferred Calls Admitted.......... 0
  Total Num of Ongoing Preferred Calls........... 0
  Total Num of Calls Rejected(Insuff BW)......... 0
  Total Num of Roam Calls Rejected(Insuff BW).... 0
KTS based CAC Call Stats
  Total Num of Calls in progress................. 0
  Num of Roam Calls in progress.................. 0
  Total Num of Calls Admitted.................... 0
  Total Num of Roam Calls Admitted............... 0
  Total Num of Calls Rejected(Insuff BW)......... 0
  Total Num of Roam Calls Rejected(Insuff BW).... 0

例

次に、show cac voice summary コマンドの出力例を示します。

(Cisco Controller) > show cac voice summary 
    AP Name         Slot#   Radio  BW Used/Max  Calls
-----------------  -------  -----  -----------  -----
APc47d.4f3a.3547     0      11b/g     0/23437    0
					 1      11a    1072/23437    1

例

次に、show cac video stats 802.11b コマンドの出力例を示します。

(Cisco Controller) > show cac video stats 802.11b

WLC Video Call Statistics for 802.11b Radio

WMM TSPEC CAC Call Stats
  Total num of Calls in progress................. 0
  Num of Roam Calls in progress.................. 0
  Total Num of Calls Admitted.................... 0
  Total Num of Roam Calls Admitted............... 0
  Total Num of Calls Rejected.................... 0
  Total Num of Roam Calls Rejected............... 0
  Num of Calls Rejected due to insufficent bw.... 0
  Num of Calls Rejected due to invalid params.... 0
  Num of Calls Rejected due to PHY rate.......... 0
  Num of Calls Rejected due to QoS policy........ 0
SIP CAC Call Stats
  Total Num of Calls in progress................. 0
  Num of Roam Calls in progress.................. 0
  Total Num of Calls Admitted.................... 0
  Total Num of Roam Calls Admitted............... 0
  Total Num of Calls Rejected(Insuff BW)......... 0
  Total Num of Roam Calls Rejected(Insuff BW).... 0

例

次に、show cac video summary コマンドの出力例を示します。

(Cisco Controller) > show cac video summary 

    AP Name         Slot#   Radio  BW Used/Max  Calls
-----------------  -------  -----  -----------  -----
AP001b.d571.88e0     0      11b/g     0/10937    0
                     1      11a       0/18750    0
AP5_1250             0      11b/g     0/10937    0
                     1      11a       0/18750    0

例

次に、アクセス ポイントに対して生成された、成功したコールを表示する show call-controller ap コマンドの出力例を示します。

(Cisco Controller) >show call-control ap 802.11a Cisco_AP metrics
Total Call Duration in Seconds................... 120
Number of Calls.................................. 10
Number of calls for given client is................. 1

次に、AP に対して生成された、トラップのメトリックを表示する show call-control ap コマンドの出力例を示します。

(Cisco Controller) >show call-control ap 802.11a Cisco_AP traps
Number of traps sent in one min.................. 2
Last SIP error code.............................. 404
Last sent trap timestamp...................... Jun 20 10:05:06

例

次に、show call-controller client コマンドの出力例を示します。

(Cisco Controller) > show call-control client callInfo 10.10.10.10.10.10
Uplink IP/port................................... 0.0.0.0 /   0
Downlink  IP/port................................ 9.47.96.107 / 5006
UP...............................................   6
Calling Party.................................... sip:1021
Called Party..................................... sip:1000
Call ID.......................................... 38423970c3fca477
Call on hold: ................................... FALSE
Number of calls for given client is.............. 1

例

次に、Call Home サマリーの例を示します。

(Cisco Controller) > show call-home summaryCurrent call home settings:
    call home feature : enabled
    contact person's email address: sch-smart-licensing@cisco.com

    Mail-server: Not yet set up
    http proxy: Not yet set up


    Smart licensing messages: disabled

    data-privacy: normal
    Event throttling: Off

    Rate-limit: 20 message(s) per minute
Profile name:  CiscoTAC-1
   Status: Inactive
   TAC profile: Yes
   Mode: Full reporting
   Report data: SCH SL
   Msg Format: XML
   Msg size limit: 3145728
   Transport method: HTTP

--More-- or (q)uit In slWlcProcessSLStatsClearMsg
      https://tools.cisco.com/its/service/oddce/services/DDCEService

例

次に、アクセス ポイントにアソシエートされているクライアントとその SSID を表示する例を示します。

(Cisco Controller) >show capwap reap association

例

次に、FlexConnect アクセス ポイントのステータスを表示する例を示します。

(Cisco Controller) >show capwap reap status

例

次に、show cdp コマンドの出力例を示します。

(Cisco Controller) > show cdp
CDP counters :
Total packets output: 0, Input: 0
Chksum error: 0
No memory: 0, Invalid packet: 0,

例

次に、show certificate compatibility コマンドの出力例を示します。

(Cisco Controller) > show certificate compatibility
Certificate compatibility mode:................ off

例

次に、show certificate lsc summary コマンドの出力例を示します。

(Cisco Controller) > show certificate lsc summary
LSC Enabled...................................... Yes
LSC CA-Server.................................... http://10.0.0.1:8080/caserver
LSC AP-Provisioning.............................. Yes
Provision-List............................... Not Configured
LSC Revert Count in AP reboots............... 3
LSC Params:
Country...................................... 4
State........................................ ca
City......................................... ss
Orgn......................................... org
Dept......................................... dep
Email........................................ dep@co.com
KeySize...................................... 390
LSC Certs:
CA Cert...................................... Not Configured
RA Cert...................................... Not Configured

次に、LSC を使用してプロビジョニングされるアクセス ポイントに関する詳細を表示する例を示します。

(Cisco Controller) > show certificate lsc ap-provision
LSC AP-Provisioning.............................. Yes
Provision-List................................... Present
Idx Mac Address
--- -------------
1 00:18:74:c7:c0:90

例

次に、show certificate ssc コマンドの出力例を示します。

(Cisco Controller) > show certificate ssc
 SSC Hash validation.............................. Enabled.

 SSC Device Certificate details:

         Subject Name :
                 C=US, ST=California, L=San Jose, O=Cisco Virtual Wireless LAN Controller,
                 CN=DEVICE-vWLC-AIR-CTVM-K9-000C297F2CF7, MAILTO=support@vwlc.com

         Validity :
                 Start : 2012 Jul 23rd, 15:47:53 GMT
                 End   : 2022 Jun  1st, 15:47:53 GMT

         Hash key : 5870ffabb15de2a617132bafcd73

例

次に、show certificate summary コマンドの出力例を示します。

(Cisco Controller) > show certificate summary
Web Administration Certificate................. Locally Generated
Web Authentication Certificate................. Locally Generated
Certificate compatibility mode:................ off

例

次に、アクセス ポイント上のクライアント情報を表示する例を示します。

(Cisco Controller) >show client ap 802.11b AP1
MAC Address        AP Id   Status         WLAN Id    Authenticated
-----------------  ------  -------------  ---------  -------------
xx:xx:xx:xx:xx:xx      1   Associated     1          No

例

次に、show client calls active 802.11a コマンドの出力例を示します。

(Cisco Controller) > show client calls active 802.11a
Client MAC               Username         Total Call            AP Name         Radio Type
                                         Duration (sec)
--------------------    ---------         ----------       ---------------      ----------
00:09: ef: 02:65:70        abc               45            VJ-1240C-ed45cc        802.11a
00:13: ce: cc: 51:39       xyz               45                AP1130-a416        802.11a
00:40:96: af: 15:15        def               45                AP1130-a416        802.11a
00:40:96:b2:69: df         def               45                AP1130-a416        802.11a
Number of Active Calls ------------------------------------ 4

例

次に、show client ccx client-capability コマンドの出力例を示します。

(Cisco Controller) >show client ccx client-capability 00:40:96:a8:f7:98
Service Capability.................................. Voice, Streaming(uni-directional) Video, Interactive(bi-directional) Video
Radio Type.......................................... DSSS OFDM(802.11a) HRDSSS(802.11b) ERP(802.11g)
Radio Type.......................................... DSSS
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 1.0 2.0
Radio Type.......................................... HRDSSS(802.11b)
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 5.5 11.0
Radio Type.......................................... ERP(802.11g)
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
Are you sure you want to start? (y/N)y Are you sure you want to start? (y/N)

例

次に、show client ccx frame-data コマンドの出力例を示します。

(Cisco Controller) >show client ccx frame-data
 xx:xx:xx:xx:xx:xx

例

次に、show client ccx last-response-status コマンドの出力例を示します。

(Cisco Controller) >show client ccx last-response-status
Test Status ........................ Success
Response Dialog Token.............. 87
Response Status.................... Successful
Response Test Type................. 802.1x Authentication Test
Response Time...................... 3476 seconds since system boot

例

次に、show client ccx last-test-status コマンドの出力例を示します。

(Cisco Controller) >show client ccx last-test-status

Test Type ........................ Gateway Ping Test
Test Status ...................... Pending/Success/Timeout
Dialog Token ..................... 15
Timeout .......................... 15000 ms
Request Time ..................... 1329 seconds since system boot

例

次に、show client ccx log-response syslog コマンドの出力例を示します。

(Cisco Controller) >show client ccx log-response syslog 00:40:96:a8:f7:98
Tue Jun 26 18:07:48 2007		 		 	Syslog Response LogID=131: Status=Successful
						 	Event Timestamp=0d 00h 19m 42s 278987us
							Client SysLog = ‘<11> Jun 19 11:49:47 unraval13777 Mandatory elements missing in the OID response’
							Event Timestamp=0d 00h 19m 42s 278990us
							Client SysLog = ‘<11> Jun 19 11:49:47 unraval13777 Mandatory elements missing in the OID response’
Tue Jun 26 18:07:48 2007		 		 	Syslog Response LogID=131: Status=Successful
						 	Event Timestamp=0d 00h 19m 42s 278987us
							Client SysLog = ‘<11> Jun 19 11:49:47 unraval13777 Mandatory elements missing in the OID response’
							Event Timestamp=0d 00h 19m 42s 278990us
							Client SysLog = ‘<11> Jun 19 11:49:47 unraval13777 Mandatory elements missing in the OID response’

次に、クライアントのローミング ログ応答を表示する例を示します。

(Cisco Controller) >show client ccx log-response roam 00:40:96:a8:f7:98
Thu Jun 22 11:55:14 2007 	 	Roaming Response LogID=20: Status=Successful
Event Timestamp=0d 00h 00m 13s 322396us						Source BSSID=00:40:96:a8:f7:98
Target BSSID=00:0b:85:23:26:70,						Transition Time=100(ms)					
Transition Reason: Normal roam, poor link						Transition Result: Success
Thu Jun 22 11:55:14 2007 	 	Roaming Response LogID=133: Status=Successful
Event Timestamp=0d 00h 00m 16s 599006us						Source BSSID=00:0b:85:81:06:c2
Target BSSID=00:0b:85:81:06:c2,						Transition Time=3235(ms)						
Transition Reason: Normal roam, poor link						Transition Result: Success
Thu Jun 22 18:28:48 2007 	 	Roaming Response LogID=133: Status=Successful
Event Timestamp=0d 00h 00m 08s 815477us						Source BSSID=00:0b:85:81:06:c2
Target BSSID=00:0b:85:81:06:d2,						Transition Time=3281(ms)						
Transition Reason: First association to WLAN						Transition Result: Success

例

次に、show client ccx manufacturer-info コマンドの出力例を示します。

(Cisco Controller) >show client ccx manufacturer-info 00:40:96:a8:f7:98
Manufacturer OUI .............................. 00:40:96
Manufacturer ID ............................... Cisco
Manufacturer Model ............................ Cisco Aironet 802.11a/b/g Wireless Adapter
Manufacturer Serial ........................... FOC1046N3SX
Mac Address ................................... 00:40:96:b2:8d:5e
Radio Type .................................... DSSS OFDM(802.11a) HRDSSS(802.11b)
  ERP(802.11g)
Antenna Type .................................. Omni-directional diversity
Antenna Gain .................................. 2 dBi
Rx Sensitivity:
Radio Type ...................................... DSSS
Rx Sensitivity .................................. Rate:1.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:2.0 Mbps, MinRssi:-95, MaxRss1:-30
Radio Type ...................................... HRDSSS(802.11b)
Rx Sensitivity .................................. Rate:5.5 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:11.0 Mbps, MinRssi:-95, MaxRss1:-30
Radio Type ...................................... ERP(802.11g)
Rx Sensitivity .................................. Rate:6.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:9.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:12.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:18.0 Mbps, MinRss1:-95, MaxRss1:-30

例

次に、show client ccx operating-parameters コマンドの出力例を示します。

(Cisco Controller) >show client ccx operating-parameters 00:40:96:b2:8d:5e
Client Mac ......................................... 00:40:96:b2:8d:5e
Radio Type ......................................... OFDM(802.11a)
Radio Type ......................................... OFDM(802.11a)
	Radio Channels ................................. 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
	Tx Power Mode .................................. Automatic
	Rate List(MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
Power Save Mode .................................... Normal Power Save
SSID ............................................... wifi
Security Parameters[EAP Method, Credential]......... None
Auth Method ........................................ None
Key Management...................................... None
Encryption ......................................... None
Device Name ........................................ Wireless Network Connection 15
Device Type ........................................ 0
OS Id .............................................. Windows XP
OS Version ......................................... 5.1.6.2600 Service Pack 2
IP Type ............................................ DHCP address
IPv4 Address ....................................... Available
IP Address ......................................... 70.0.4.66
Subnet Mask ........................................ 255.0.0.0
Default Gateway .................................... 70.1.0.1
IPv6 Address ....................................... Not Available
IPv6 Address ....................................... 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:
IPv6 Subnet Mask ................................... 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:
DNS Servers ........................................ 103.0.48.0
WINS Servers .......................................
System Name ........................................ URAVAL3777
Firmware Version ................................... 4.0.0.187
Driver Version ..................................... 4.0.0.187

例

次に、show client ccx profiles コマンドの出力例を示します。

(Cisco Controller) >show client ccx profiles 00:40:96:15:21:ac
Number of Profiles .................................. 1
Current Profile ..................................... 1
Profile ID .......................................... 1
Profile Name ........................................ wifiEAP
SSID ................................................ wifiEAP
Security Parameters [EAP Method, Credential]......... EAP-TLS, Host OS Login Credentials
Auth Method ......................................... EAP
Key Management ...................................... WPA2+CCKM
Encryption .......................................... AES-CCMP
Power Save Mode ..................................... Constantly Awake
Radio Configuration:
Radio Type........................................... DSSS
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 1.0 2.0
Radio Type........................................... HRDSSS(802.11b)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List(MB).................................... 5.5 11.0
Radio Type........................................... ERP(802.11g)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
Radio Type........................................... OFDM(802.11a)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 36 40 44 48 52 56 60 64 149 153 157 161 165
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0

例

次に、show client ccx results コマンドの出力例を示します。

(Cisco Controller) >show client ccx results xx.xx.xx.xx
dot1x Complete....................................... Success
EAP Method........................................... *1,Host OS Login Credentials
dot1x Status......................................... 255

例

次に、クライアント無線管理ステータス情報を表示する例を示します。

(Cisco Controller) >show client ccx rm 00:40:96:15:21:ac status

Client Mac Address............................... 00:40:96:15:21:ac
Channel Load Request............................. Enabled
Noise Histogram Request.......................... Enabled
Beacon Request................................... Enabled
Frame Request.................................... Enabled
Interval......................................... 30
Iteration........................................... 10

次に、クライアント無線管理ロード レポートを表示する例を示します。

(Cisco Controller) >show client ccx rm 00:40:96:15:21:ac report chan-load

Channel Load Report
Client Mac Address............................... 00:40:96:ae:53:bc
Timestamp........................................ 788751121
Incapable Flag................................... On
Refused Flag........................................ On
Chan CCA Busy Fraction
-----------------------
1  194
2  86
3  103
4  0
5  178
6  82
7  103
8  95
9  13
10 222
11 75
		

次に、クライアント無線管理ノイズ ヒストグラム レポートを表示する例を示します。

(Cisco Controller) >show client ccx rm 00:40:96:15:21:ac report noise-hist

Noise Histogram Report
Client Mac Address............................... 00:40:96:15:21:ac
Timestamp........................................ 4294967295
Incapable Flag................................... Off
Refused Flag........................................ Off
Chan RPI0 RPI1 RPI2 RPI3 RPI4 RPI5 RPI6 RPI7

例

次に、show client ccx stats-report コマンドの出力例を示します。

(Cisco Controller) > show client ccx stats-report 00:0c:41:07:33:a6
Measurement duration = 1
dot11TransmittedFragmentCount       = 1
dot11MulticastTransmittedFrameCount = 2
dot11FailedCount                    = 3
dot11RetryCount                     = 4
dot11MultipleRetryCount             = 5
dot11FrameDuplicateCount            = 6
dot11RTSSuccessCount                = 7
dot11RTSFailureCount                = 8
dot11ACKFailureCount                = 9
dot11ReceivedFragmentCount          = 10
dot11MulticastReceivedFrameCount    = 11
dot11FCSErrorCount                  = 12
dot11TransmittedFrameCount          = 13

例

次に、show client detail mac_address コマンドの出力例を示します。

(Cisco Controller) > show client detail 01:35:6x:yy:21:00
 Client MAC Address............................... 01:35:6x:yy:21:00
Client Username ................................. test
AP MAC Address................................... 00:11:22:33:44:x0
AP Name.......................................... AP0011.2020.x111
AP radio slot Id................................. 1
Client State..................................... Associated
Client NAC OOB State............................. Access
Wireless LAN Id.................................. 7
Hotspot (802.11u)................................ Not Supported
BSSID............................................ 00:11:22:33:44:xx
Connected For ................................... 28 secs
Channel.......................................... 56
IP Address....................................... 10.0.0.1
Gateway Address.................................. Unknown
Netmask.......................................... Unknown
IPv6 Address..................................... xx20::222:6xyy:zeeb:2233
Association Id................................... 1
Authentication Algorithm......................... Open System
Reason Code...................................... 1
Status Code...................................... 0
Client CCX version............................... No CCX support
Re-Authentication Timeout........................ 1756
QoS Level........................................ Silver
Avg data Rate.................................... 0
Burst data Rate.................................. 0
Avg Real time data Rate.......................... 0
Burst Real Time data Rate........................ 0
802.1P Priority Tag.............................. disabled
CTS Security Group Tag........................... Not Applicable
KTS CAC Capability............................... No
WMM Support...................................... Enabled
  APSD ACs.......................................  BK  BE  VI  VO
Power Save....................................... ON
Current Rate..................................... m7
Supported Rates.................................. 6.0,9.0,12.0,18.0,24.0,36.0,
    ............................................. 48.0,54.0
Mobility State................................... Local
Mobility Move Count.............................. 0
Security Policy Completed........................ No
Policy Manager State............................. SUPPLICANT_PROVISIONING
Policy Manager Rule Created...................... Yes
AAA Override ACL Name............................ android
AAA Override ACL Applied Status.................. Yes
AAA Override Flex ACL Name....................... none
AAA Override Flex ACL Applied Status............. Unavailable
AAA URL redirect................................. https://10.0.0.3:8443/guestportal/gateway?sessionId=0a68aa72000000015272404e&action=nsp
Audit Session ID................................. 0a68aa72000000015272404e
AAA Role Type.................................... none
Local Policy Applied............................. p1
IPv4 ACL Name.................................... none
FlexConnect ACL Applied Status................... Unavailable
IPv4 ACL Applied Status.......................... Unavailable
IPv6 ACL Name.................................... none
IPv6 ACL Applied Status.......................... Unavailable
Layer2 ACL Name.................................. none
Layer2 ACL Applied Status........................ Unavailable
Client Type...................................... SimpleIP
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
No. of mDNS Services Advertised.................. 0
Policy Type...................................... WPA2
Authentication Key Management.................... 802.1x
Encryption Cipher................................ CCMP (AES)
Protected Management Frame ...................... No
Management Frame Protection...................... No
EAP Type......................................... PEAP
Interface......................................
.. management
VLAN............................................. 0
Quarantine VLAN.................................. 0
Access VLAN...................................... 0
Client Capabilities:
      CF Pollable................................ Not implemented
      CF Poll Request............................ Not implemented
      Short Preamble............................. Not implemented
      PBCC....................................... Not implemented
      Channel Agility............................ Not implemented
      Listen Interval............................ 10
      Fast BSS Transition........................ Not implemented
Client Wifi Direct Capabilities:
      WFD capable................................ No
      Manged WFD capable......................... No
      Cross Connection Capable................... No
      Support Concurrent Operation............... No
Fast BSS Transition Details:
Client Statistics:
      Number of Bytes Received................... 123659
      Number of Bytes Sent....................... 120564
      Number of Packets Received................. 1375
      Number of Packets Sent..................... 276
      Number of Interim-Update Sent.............. 0
      Number of EAP Id Request Msg Timeouts...... 0
      Number of EAP Id Request Msg Failures...... 0
      Number of EAP Request Msg Timeouts......... 2
      Number of EAP Request Msg Failures......... 0
      Number of EAP Key Msg Timeouts............. 0
      Number of EAP Key Msg Failures............. 0
      Number of Data Retries..................... 82
      Number of RTS Retries...................... 0
      Number of Duplicate Received Packets....... 0
      Number of Decrypt Failed Packets........... 0
      Number of Mic Failured Packets............. 0
      Number of Mic Missing Packets.............. 0
      Number of RA Packets Dropped............... 0
      Number of Policy Errors.................... 0
      Radio Signal Strength Indicator............ -51 dBm
      Signal to Noise Ratio...................... 46 dB
Client Rate Limiting Statistics:
      Number of Data Packets Recieved............ 0
      Number of Data Rx Packets Dropped.......... 0
      Number of Data Bytes Recieved.............. 0
      Number of Data Rx Bytes Dropped............ 0
      Number of Realtime Packets Recieved........ 0
      Number of Realtime Rx Packets Dropped...... 0
      Number of Realtime Bytes Recieved.......... 0
      Number of Realtime Rx Bytes Dropped........ 0
      Number of Data Packets Sent................ 0
      Number of Data Tx Packets Dropped.......... 0
      Number of Data Bytes Sent.................. 0
      Number of Data Tx Bytes Dropped............ 0
      Number of Realtime Packets Sent............ 0
      Number of Realtime Tx Packets Dropped...... 0
      Number of Realtime Bytes Sent.............. 0
      Number of Realtime Tx Bytes Dropped........ 0
Nearby AP Statistics:
      AP0022.9090.c545(slot 0)
        antenna0: 26 secs ago.................... -33 dBm
        antenna1: 26 secs ago.................... -35 dBm
      AP0022.9090.c545(slot 1)
        antenna0: 25 secs ago.................... -41 dBm
        antenna1: 25 secs ago.................... -44 dBm
      APc47d.4f3a.35c2(slot 0)
        antenna0: 26 secs ago.................... -30 dBm
        antenna1: 26 secs ago.................... -36 dBm
      APc47d.4f3a.35c2(slot 1)
        antenna0: 24 secs ago.................... -43 dBm
        antenna1: 24 secs ago.................... -45 dBm
DNS Server details:
      DNS server IP ............................. 0.0.0.0
      DNS server IP ............................. 0.0.0.0

Client Dhcp Required:     False
Allowed (URL)IP Addresses
-------------------------
209.165.200.225
209.165.200.226
209.165.200.227
209.165.200.228
209.165.200.229
209.165.200.230
209.165.200.231
209.165.200.232
209.165.200.233
209.165.200.234
209.165.200.235
209.165.200.236
209.165.200.237
209.165.200.238
209.165.201.1
209.165.201.2
209.165.201.3
209.165.201.4
209.165.201.5
209.165.201.6
209.165.201.7
209.165.201.8
209.165.201.9
209.165.201.10

例

次に、ロケーション調整要約情報を表示する例を示します。

(Cisco Controller) >show client location-calibration summary
MAC Address Interval
----------- ----------
10:10:10:10:10:10 60
21:21:21:21:21:21 45

例

次に、show client roam-history コマンドの出力例を示します。

(Cisco Controller) > show client roam-history 00:14:6c:0a:57:77

例

次に、アクティブなクライアントの要約を表示する例を示します。

(Cisco Controller) > show client summary
Number of Clients................................ 24
Number of PMIPV6 Clients......................... 200
MAC Address       AP Name           Status        WLAN/GLAN/RLAN Auth Protocol         Port Wired  PMIPV6
----------------- ----------------- ------------- -------------- ---- ---------------- ---- -----		------

00:00:15:01:00:01 NMSP-TalwarSIM1-2 Associated    1              Yes  802.11a          13   No      Yes
00:00:15:01:00:02 NMSP-TalwarSIM1-2 Associated    1              Yes  802.11a          13   No      No
00:00:15:01:00:03 NMSP-TalwarSIM1-2 Associated    1              Yes  802.11a          13   No      Yes
00:00:15:01:00:04 NMSP-TalwarSIM1-2 Associated    1              Yes  802.11a          13   No      No

例

次に、デバイス タイプが Windows XP ワークステーションのすべてのクライアントを表示する例を示します。

(Cisco Controller) >show client summary WindowsXP-Workstation
Number of Clients in WLAN........................ 0

MAC Address       AP Name    Status        Auth Protocol         Port Wired Mobility Role

----------------- -------- ------------- ----------------        ---------- --------------

Number of Clients with requested device type..... 0

例

次に、show client summary guest-lan コマンドの出力例を示します。

(Cisco Controller) > show client summary guest-lan 
Number of Clients................................ 1
MAC Address       AP Name      Status         WLAN  Auth   Protocol  Port Wired
-----------       ---------    ----------     ----  ----   --------  ---- -----
00:16:36:40:ac:58  N/A         Associated        1    No      802.3     1   Yes

例

次に、show client tsm 802.11a コマンドの出力例を示します。

(Cisco Controller) > show client tsm 802.11a xx:xx:xx:xx:xx:xx all
AP Interface MAC: 00:0b:85:01:02:03
Client Interface Mac:               00:01:02:03:04:05
Measurement Duration:               90 seconds
  Timestamp                           1st Jan 2006, 06:35:80
    UpLink Stats
    ================
       Average Delay (5sec intervals)............................35
       Delay less than 10 ms.....................................20
       Delay bet 10 - 20 ms......................................20
       Delay bet 20 - 40 ms......................................20
       Delay greater than 40 ms..................................20
      Total packet Count.........................................80
      Total packet lost count (5sec).............................10
      Maximum Lost Packet count(5sec)............................5
      Average Lost Packet count(5secs)...........................2
    DownLink Stats
    ================
       Average Delay (5sec intervals)............................35
       Delay less than 10 ms.....................................20
       Delay bet 10 - 20 ms......................................20
       Delay bet 20 - 40 ms......................................20
       Delay greater than 40 ms..................................20
      Total packet Count.........................................80
      Total packet lost count (5sec).............................10
      Maximum Lost Packet count(5sec)............................5
      Average Lost Packet count(5secs)...........................2

例

次に、show client username コマンドの出力例を示します。

(Cisco Controller) > show client username local

MAC Address        AP Name            Status         WLAN  Auth  Protocol          Port  Device Type
-----------------  -----------------  -------------  ----  ----  ----------------  ----  -----------

12:22:64:64:00:01  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:02  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:03  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:04  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:05  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:06  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:07  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown
12:22:64:64:00:08  WEB-AUTH-AP-1      Associated     1     Yes   802.11g            1    Unknown