IP Routed Protocols
Select from the following IP routed protocol categories for more in-depth information. Technology-specific resources available from these pages can assist you with network design, configuration, maintenance and operation, troubleshooting, and other related topics.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback-
Top Search Results
Key Information
Customers Also Viewed
Saved Content
-
You can now save documents for easier access and future use. Saved documents for this product will be listed here, or visit the My Saved Content page to view and manage all saved content from across Cisco.com.
Log in to see your Saved Content.
-
Technology Information
- IP Routing Frequently Asked Questions
Technology Q&A
- Access Control Lists and IP Fragments
Technology White Paper
-
Design
- ICMPv6 Packet Types and Codes
Design TechNotes
-
Configuration
-
Internet Protocol (IP)
- Understand LFA and Remote LFA IP Fast Reroute
- Flexible NetFlow Filtering with Performance Monitor
- Configure ASR1000 Local ERSPAN
- How to Disable IPV6 from CentOS / Linux
- Configure Packet-Trace to Debug PBR Traffic on XE Platforms
- Dial IP Addresses from Endpoints Registered to CUCM with VCS / Expressway Configuration Example
- Dial IP Addresses from Endpoints Registered to CUCM with VCS / Expressway Configuration Example (PDF - 235 KB)
- Easy Virtual Network Configuration Example
- Use the Ethernet Packet Capture Feature to Troubleshoot High CPU Utilization
-
Transmission Control Protocol (TCP)
-
Internet Protocol (IP)
- Configure Load balancing on PFRv3
- Sample IPv6 Configuration for BGP with Two Different Service Providers (Multihoming)
- Adjust Administrative Distance for Route Selection in Cisco IOS Routers Configuration Example
- Policy-Based Routing through IPv6 Configuration Example
- Policy Routing with Catalyst 3550 Series Switch Configuration Example
- Policy Based Routing with the Multiple Tracking Options Feature Configuration Example
- Layer 2 Tunneling Protocol (Version 3) Static Method and Hairpinning Method Configuration Example
Configuration Examples and TechNotes
-
-
Operation and Troubleshooting
- Troubleshoot TCP Slowness Issues due to MSS Adjustment in Catalyst 9K Switches
- Consider SNMP Counters: Frequently Asked Questions
- Configure MD5 Authentication Between BGP Peers
- Understand MPLS L2VPN Pseudowire
- Configure a Gateway of Last Resort that Uses IP Commands
- Understand and Use the Enhanced Interior Gateway Routing Protocol
- Verify IPDT Device Operations
- Understand the Extended Ping and Extended Traceroute Commands
- Configure Administrative Distance of Specific Received Route
- Configure TCP Replay with 2 NICs on Kali Linux
- Troubleshoot HSRP Aware PIM
- Verify Path MTU Discovery on Cisco IOS XR and BGP
- Allow a Trusted Sender to Bypass Anti-Spam
- eBGP peering over vPC on Nexus
- Cisco ISR4000 Series Integrated Services Routers Bridge Domain Configuration Guide
Troubleshooting TechNotes
-
