Configuring Guard Interval for HE (High Efficiency)
Longer guard intervals improve link reliability for long range outdoor deployments and the feature like guard interval supports URWB stacks.
To configure a guard interval, use the following CLI command:
Device# configure dot11Radio [interface] guard-interval [gi]
gi - Guard interval values are:
1600 - To configure 1600 ns guard interval (supported only in HE mode)
3200 - To configure 3200 ns guard interval (supported only in HE mode)
400 - To configure 400 ns guard interval (supported in HT and VHT modes)
800 - To configure 800 ns guard interval (default guard interval mode and disable mode in HT, VHT, and HE)
Example:
Device# configure dot11Radio 1 high-efficiency enable
Device# configure dot11Radio 1 guard-interval 1600
Device# configure dot11Radio 1 guard-interval 3200
Device# wr
Device# show dot11Radio 1 config
Maximum tx mcs: 9
High-efficiency : enabled
Maximum tx nss : 2
RTS protection : disabled
guard-interval : 1600 ns
Device# show dot11Radio 2 config
Maximum tx mcs: 9
High-efficiency : enabled
Maximum tx nss : 2
RTS protection : disabled
guard-interval : 3200 ns