System Specifications

Table A-1 describes the system specifications for the mobility services engine.

Table A-1 Specifications 

Dimensions

1.7 in. high (4.3 cm)
17 in. wide (43.2 cm)
20 in. deep (50.8 cm)

Weight

20 lbs (9 kg)

Power consumption

540 W (maximum input, power supply rating)
350 W (maximum output, power supply rating)
Power factor correction

Voltage

Input low range—90 to 127 (nominal) VAC; 47 to 63 Hz
Input high range—180 to 264 (nominal) VAC; 47 to 63 Hz

Temperature

Non-operating

-40 to 158°F (-40° to 70°C)

Operating

50 to 95 °F (10° to 35°C), with the maximum rate of change not to exceed 50°F (10° C) per hour

Humidity

Non-operating—90% relative humidity, non-condensing at
95°F (35°C )

Altitude

2000 m at 104°F (40°C)

Shock

Operating—2.0 g, 11 msec, 1/2 sine
Packaged—Operational after a 24-inch free fall

Acoustic noise

7 Bels in sound power for a typical office ambient temperature of
65 to 75°F (18 to 24°C)

Note Peripheral operation might change the noise level

Electrostatic discharge (ESD)

Tested to 15 kilovolts (kV) with no component damage

Hard disk

Quantity—Two drives
Interface type—Serial-ATA (SATA300)
Capacity—250 GB (each)

DVD-ROM

8X DVD read, 24X CD read

Ethernet NIC

Two 10/100/1000BASE-T Ethernet (NIC) ports
Two RJ-45 connectors

Serial port

DB-9 connector for console port and serial communications

Video port

DB-15 connector