- Preface
- Overview
- AAA and ACL System Messages
- APF AUTOINST and AVL System Messages
- BASE and BCAST System Messages
- BOOTP and BUFF System Messages
- CAPWAP CCX CDP and CIDS System Messages
- CLI CLIWEB and CNFGR System Messages
- DAPI DEBUG and DHCP System Messages
- DOT1D DOT1Q DOT1X and DOT3AD System Messages
- DTL and EAP System Messages
- EMT EMWEB ENVMON and ETHOIP System Messages
- FDB FIPS HA HIFN and FlexConnect System Messages
- IAPP IDMGR INIT IOS System Messages
- IPSTAT L7API L7COMM and LAG System Messages
- LICENSE LOCP and LOG System Messages
- LRADSIM and LWAPP System Messages
- MIRROR MM and MMC System Messages
- NIM NMSP NULL and OSAPI System Messages
- PEM System Messages
- PKTDEBUG PMALLOC POE and POLICY System Messages
- POWER PPTP and RBCP System Messages
- RF RFID RMGR RRM and SIM System Messages
- SNMP SNMPUTIL and SNTP System Messages
- SSHPM SYSNET and SYSTEM Messages
- TFTP TOOL TRAPMGR and UPDATE System Messages
- USMDB WCP WEB and WPS System Messages
System Message Overview
This publication lists and describes system messages for Cisco Wireless LAN Controllers (Cisco WLC). The system software sends these messages to the console during operation. Not all system messages indicate problems with your system. Some messages are purely informational, while others might help to diagnose problems with communications lines, internal hardware, or the system software.
System Message Structure
System messages are structured as follows:
%FACILITY-SEVERITY-MNEMONIC: Message-text
The facility code consists of two or more uppercase letters that indicate the facility to which the message refers. The facility code is preceded by a % sign.
A facility can be a device, a protocol, or a module of the system software. Examples of facility codes are %BCAST (messages that are related to broadcasting) and %LWAPP (messages that are related to the Lightweight Access Point Protocol).
The severity level is a single-digit code from 0 to 7 that reflects the severity of the condition. A lower number indicates a more serious situation.
|
|
---|---|
The MNEMONIC code uniquely identifies the message.
The message text is a text string that describes the condition. The text string sometimes contains detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because variable fields change from message to message, they are represented by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec].
|
|
---|---|
System Message Example
The following is an example of a system message:
%BCAST-3-UNSUPPORTED_MSG_TYPE: Received unsupported message (type = [dec])
Searching for System Messages in Online Documentation
To search for a message in the online documentation, copy and paste the message that appears on the console or in the system log into the search function of your browser. Copy and paste these portions of the message: