clear Commands

clear avc nbar

To clear AVC NBAR statistics, use the clear avc nbar command.

clear avc nbar statistics

Syntax Description

statistics

Clears AVC NBAR statistics

Command Modes

Privileged EXEC (#)

Command History

Release Modification

8.1.111.0

This command was introduced.

Examples

The following example shows how to clear AVC NBAR statistics:

cisco-ap# clear avc nbar statistics 

clear counters

To clear 802.11 radio statistics, use the clear counters command.

clear countersDot11Radio interface-number| client | fast-path profinet | wired interface-number MIB-stats

Syntax Description

Dot11Radio

(Optional) Clears the Dot11 interface statistics.

interface-number

Dot11Radio interface number; valid value is 0 or 1.

client

Clears the client statistics.

fast-path

Clears the controller fast-path statistics.

profinet

Clears the profinet statistics.

wired

Clears the wired interface statistics.

interface-number

Wired interface number, valid value is between 0 and 3.

MIB-stats

Clears the AP Internal-Switch MIB counters.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

8.1.111.0

This command was introduced.

8.7

This command was enhanced by adding client, fast-path, profinet, wired parameters.

Examples

The following example shows how to clear 802.11 interface statistics for the interface number specified:

cisco-ap# clear counters Dot11Radio 1

clear cts

To clear the statistics of Cisco TrustSec Security, use the clear cts command.

clear cts role-based counters [ all | client mac-addr | from sgt to dgt]

Syntax Description

counters

Clears Cisco TrustSec summary counters

all

Clears all Cisco TrustSec counters

client mac-addr

Clears the Cisco TrustSec counters for a client MAC address specified in xx:xx:xx:xx:xx:xx format

from

Specifies the source group tag for filtered traffic

sgt

Security Group Tag (SGT); valid values are 0 to 65535

to

Specifies the destination group tag for filtered traffic

dgt

Destination Group Tag (DGT); valid values are 0 to 65535

Command Modes

Privileged EXEC (#)

Command History

Release Modification

8.1.111.0

This command was introduced.

Examples

This example shows you how to clear all the statistics of Cisco TrustSec Security counters:

cisco-ap# clear cts role-based counters all

clear datapath

To clear the datapath counters or drops, use the clear datapath command.

clear datapath { drops | statistics}

Syntax Description

drops

Clears the datapath drop counters

statistics

Clears the datapath counters

Command Modes

Privileged EXEC (#)

Command History

Release Modification

8.1.111.0

This command was introduced.

Examples

This example shows you how to clear the datapath drop counters:

cisco-ap# clear datapath drops

clear dot11

To clear the 802.11 configuration, use the clear dot11 command.

clear dot11 sensor

Syntax Description

sensor

Clears the sensor configuration and reboots

Command Modes

Privileged EXEC (#)

Command History

Release Modification

8.1.111.0

This command was introduced.

Examples

This example shows you how to clear the 802.11 configuration:

cisco-ap# clear dot11 sensor

clear logging

To clear the logging details, use the clear logging command.

clear logging [ capwap | message | warning]

Syntax Description

capwap

(Optional) Clears CAPWAP logging details

message

(Optional) Clears message logging details

warning

(Optional) Clears warnings logging details

Command Modes

Privileged EXEC (#)

Command History

Release Modification

8.1.111.0

This command was introduced.

Examples

This example shows you how to clear the CAPWAP logging details:

cisco-ap# clear logging capwap