Troubleshooting

Revised: December 21, 2009

This chapter describes the debug commands you can use to troubleshoot your configuration.

The OIT Output Interpreter Tool (registered customers only) supports certain show commands. Use the OIT to view an analysis of show command output.

Note See the Important Information on Debug Commands before you use debug commands.

See the Cisco IOS Debug Command Reference for more information.

Contents

•Baseline Troubleshooting Commands

•Voice Troubleshooting Commands

•Cisco WAAS Troubleshooting Commands

Baseline Troubleshooting Commands

•debug aaa authentication

•debug bgp all events

•debug crypto gdoi

•debug crypto isakmp

•debug frame-relay events

•debug frame-relay lmi

•debug frame-relay packet

•debug h225 events

•debug ip inspect detailed

•debug ip inspect policy detailed

•debug ip ips category

•debug ip ips detailed

•debug ip ips function-trace

•debug ip ips idconf

•debug ppp multilink data

•debug ppp multilink events

•debug radius authentication

•debug qos cce

•debug qos events

•debug qos stats

Voice Troubleshooting Commands

•debug ephone detail

•debug sccp errors

•debug sccp events

•debug sccp keepalive

•debug sccp packets

•debug voice ccapi inout

•debug voice confmsp

•debug voice dsmp

•debug voice xcodemsp

•debug voip dialpeer

Cisco WAAS Troubleshooting Commands

•debug wccp events

•debug wccp error