Operations Manager Faults
fltMgmtImportItemImportXMLError
Import from ’[localFile]’ failed, Error message: [statusReport]
This fault typically occurs when import operation fails
If you see this fault, take the following actions:
Step 1 Click ’Properties’ of this import operation and check Status to see error description
Step 2 According to error description, change import configuration and try import again
Step 3 If the above actions did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltFirmwareSourceRemote-download-failure
[type] Auto Download Failed. Error: [downloadError]
This fault typically occurs when the download configuration is not correct
If you see this fault, take the following actions:
Step 1 Review the fault and the error message on the Faults tab.
Step 2 Check Username, Password amd Download State
Step 3 Check Proxy configuration if exists
Step 4 If the above actions did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltCommSvcEpCommSvcNotDeployed
Communication Service configuration can’t be deployed. Error: [configStatusMessage]
This fault typically occurs because Cisco UCS Manager has detected an invalid communication policy confiuration.
If you see this fault, take the following actions:
Step 1 Verify that ports configured across all communication services is unique.
fltPkiTPStatus
[name] Trustpoint’s cert-chain is invalid, reason: [certStatus].
This fault occurs when certificate status of TrustPoint has become invalid.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
fltPkiKeyRingStatus
[name] Keyring’s certificate is invalid, reason: [certStatus].
This fault occurs when certificate status of Keyring has become invalid.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
fltConfigBackupUngrouped-domain
Unable to backup remotely.[faultDescr]
remote scheduled backup failed. This fault typically occurs if the admin supplied wrong password, host, user name or path to the remote machine.
If you see this fault, take the following actions:
Step 1 Verify that remote scheduled backup policy parameters are valid
fltMgmtExportPolicyNo-scheduler-exists
scheduler [schedName] not found
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.