PDF(198.0 KB) View with Adobe Reader on a variety of devices
ePub(80.5 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(85.3 KB) View on Kindle device or Kindle app on multiple devices
Updated:September 8, 2015
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
First Published: July 23, 2014 Last Updated: September 11, 2015
This document describes system requirements, new features, resolved caveats, known caveats, and open caveats with workarounds for Cisco UCS Central software Release 1.2. This document also includes information that became available after the technical documentation was published.
Make sure to review other available documentation on Cisco.com to obtain current information on Cisco UCS Central.
Added known limitation related to issue reported in CSCus21388.
1.2(1a)
July 23, 2014
Created release notes for Cisco UCS Central Release 1.2(1a).
August 07, 2014
Added CSCuo69498 to resolved caveats.
August 22, 2014
Added more resolved caveats to 1.2(1a) list.
1.2(1d)
September 30, 2014
Updated release notes for Cisco UCS Central Release 1.2(1d).
1.2(1e)
December 19, 2014
Updated release notes for Cisco UCS Central Release 1.2(1e).
1.2(1f)
February 19, 2015
Updated release notes for Cisco UCS Central Release 1.2(1f).
1.2(1d)
September 11, 2015
Added CSCur64858 to 1.2(1d) open caveats.
Introduction
Cisco UCS Central, Release 1.2 allows you to take charge of the data center environment by delivering easy to use, integrated solution for managing multiple Cisco UCS Domains in data center and remote environments, from a single management point with high availability. With Cisco UCS Central, Release 1.2, you can efficiently manage server, storage and network policies, and generate network traffic reports for your entire UCS environment in one or more data centers.
System Requirements
To access the browser based Cisco UCS Central GUI, your computer must meet or exceed the following minimum system requirements:
Windows
– Internet Explorer 9 and above
– Firefox 29 and above
– Chrome 34 and above
Linux RHEL
– Firefox 29 and above
– Chrome 34 and above
MacOS
– Firefox 29 and above
– Chrome 34 and above
– Safari 6 and above
Adobe Flash Player 11.7 and above.
For the Chrome browser, remove the bundled flash player and install the flash player from Adobe.
The released OVA or ISO is supported with ESXi5.0 U3, ESXi5.1GA and ESXi5.5GA, ESXi 6.0.
The released ISO is supported with Microsoft Hyper-V Server 2008 R2 SP1 and Microsoft Hyper-V Server 2012.
Note If you are using Cisco UCS Release 1.2(1a), you must be running Cisco UCS Manager Release 2.1(2a) or higher. Some features of UCS Central 1.2(1a) may only work with later releases of Cisco UCS Manager.
Feature Support Matrix for Cisco UCS Central Releases
The following table provides a list of features in Cisco UCS Central, and Cisco UCS Manager release versions in which these features are supported:
Note Features such as specifying remote location for backup image files, 3rd party certificate, IPv6 inband management support are built in Cisco UCS Central to be compatible with upcoming Cisco UCS Manager releases.
Table 2 Cisco UCS Central Features and Supported Cisco UCS Manager Release
Cisco UCS Central Features
Supported Cisco UCS Central Versions
Supported Cisco UCS Manager Versions
2.1(2a)/
2.1(3x)
2.2(1
x)
2.2(2x)/2.2(3x)
3.0(1x)
Multi-version management support and viewing supported Cisco UCS Manager features
1.1(2a)
No
Yes
Yes
Yes
Importing policy/policy component and resources
No
Yes
Yes
Yes
Specifying remote location for backup files
No
No
Yes
Yes
3rd party certificates
No
No
Yes
Yes
IPv6 inband management support
No
No
Yes
Yes
Estimate Impact on Reconnect
1.2(1a)
No
No
Yes
Note: Supported only from 2.2(3x)
Yes
Precision Boot Order Control
No
Yes
Yes
Yes
Scriptable vMedia
1.2(1e)
No
No
Yes
Note: Supported only in 2.2(2c) and later 2.2(x) releases.
No
Note Searching for policy/policy components or resources is supported in Cisco UCS Manager, releases 2.1(2x) and 2.1(3x). To import policies, you must have Cisco UCS Manager, releases 2.2(1b) or higher
New Software Features in Release 1.2(1e)
Release 1.2(1e) Supports the following:
Scriptable vMedia support for M3 and newer Servers
– Non interactive OS/Driver installation and Driver Update
– Boot from a specific vMedia device that is part of a boot policy
– Ability to copy files from the mounted share to the local disk
New Software Features in Release 1.2(1a)
Release 1.2(1a) supports the following:
Platform support:
– Classic and Mini UCS Domains
– Inventory for 6324 FI-IOM and scalability ports
– FI Configuration for Ethernet and Uplink FI ports
Feature enhancements:
– Virtual MIT
– Estimate Impact on Reconnect
– Unified KVM Launch Manager
– Fault Summary and Pending Activity panel
– Precision Boot Order control
WAN Optimization
– Network bandwidth to 1.5 Mbps Minimum
– Network latency to 500ms Maximum
– Improved handling of temporary loss of connectivity between UCS Manager and UCS Central
Upgrade Paths
To deploy a fresh installation of Cisco UCS Central, Release 1.1(1b) or higher, you can use either the OVA file or the ISO image. See the Cisco UCS Central Install and Upgrade Guides for more information.
To upgrade Cisco UCS Central, you must use the ISO image. Upgrade from 1.2(1b) to any 1.2(1x) release is supported.
Note To upgrade Release 1.0(1a), you must first upgrade to 1.1(1b) release. After the upgrade has successfully completed, you can then upgrade to Release 1.2(1x). Also, make sure the registered Cisco UCS Domains are running Cisco UCS Manager, release 2.1(2a) or later.
Resolved Caveats
Resolved Caveats in Release 1.2(1f)
The following caveats are resolved in Release 1.2(1f):
Table 3 Resolved Caveats in Release 1.2(1f)
Defect ID
Description
CSCuq52593
Renaming a global service profile will not delete the ID usage for initiator IP.
CSCur97665
When you create a global service profile using the wizard with vHBAs, the vHBAs will not be missing from storage tab.
CSCus07137
Backing up UCS domains to UCS Central will not fail after performing UCS Manager upgrades.
CSCur97870
After suspending and acknowledging global boot policy, the san boot definition
will not be deleted from the system.
CSCus02456
From Cisco UCS Central, when you try to associate service profile to B200
M4 servers, the association will not fail.
CSCuq52791
In Cisco UCS Central, if iSCSI boot parameters in a boot policy uses static
IP for Initiator IP Address, changing it to a different IP pool would not cause
any issues in releasing the static IP used earlier.
CSCuq54745
Statistics DB will not fill up the disk space under the /bootflash folder.
CSCus01906
After you upgrade from Cisco UCS Central 1.1(x) to 1.2(1f), any new global service profile association that uses the same boot policy with SAN boot as other global service profiles associated before upgrade, will not cause rebooting of those other service profiles.
CSCuq43213
If you do not specify the PCI order when creating a service profile in Cisco
UCS Central, the PCI order will not show as ‘unspecified’.
CSCus69460
Fixed glibc GHOST vulnerability (CVE-2015-0235).
CSCun86526
The DST time zone is obsolete and has been removed from Cisco UCS Central.
CSCur14121
You will not get ‘can’t create; object already exists error’ when you modify a
vSAN configuration under vNIC/vHBA placement in a global service profile.
CSCus08823
You can apply manual vNIC placement when creating a global service profile.
CSCus38084
You can successfully modify or save vNIC/vHBA order using the placement
policy.
Resolved Caveats in Release 1.2(1e)
The following caveats are resolved in Release 1.2(1e):
Table 4 Resolved Caveats in Release 1.2(1e)
Defect ID
Description
CSCur04903
UCS Central will not show connectivity status as lost connectivity for registered Cisco UCS Domains when the connection is active.
CSCur30945
When a registered domain is not reachable, Cisco UCS Central will not become unresponsive.
CSCuq52965
Cisco UCS Central will no longer allow creation of invalid IQN block with empty suffix.
Resolved Caveats in Release 1.2(1d)
The following caveats are resolved in Release 1.2(1d):
Table 5 Resolved Caveats in Release 1.2(1d)
Defect ID
Description
CSCuq79346
When you launch KVM from UCS Central the KVM window title will display the service profile name.
CSCuq41727
You can configure the default http port 80 to use a different port number from the Cisco UCS Central CLI. The new port number must be greater than 1024.
CSCur05093
The security vulnerabilities identified by Common Vulnerability and Exposures (CVE) are fixed. See Bash Update bin.
Bash Update bin
UCS Central bash update bin (ucs-central-bash-update-3.2-33.el5_11.4.bin) provides a fix for the Security Vulnerabilities CVE-2014-6271 and CVE-2014-7169. This bash update bin is included in the 1.2(1d) and newer ISOs.
Note You are not required to upgrade to 1.2(1d) to use the bash update bin. You can use the bash update bin to just fix the security vulnerabilities on any Cisco UCS Central 1.2 releases. Download the bash update bin from here: Download bash update bin.
Do the following using the Cisco UCS Central CLI to download and install the bash bin update:
Download the bash update bin from Cisco.com to a local scp/ftp/sftp/tftp server.
Update the bash update bin using the following update command:
protocol: protocol supported by the local server where the file is downloaded
user_name: authorized user name on the local server
server_ip: ip/hostname of the local server
file_location: location of the bin file on local server
Note If you have setup Cisco UCS Central in HA setup, make sure to install the bash bin update in both nodes.
Resolved Caveats in Release 1.2(1a)
The following caveats are resolved in Release 1.2(1a):
Table 6 Resolved Caveats in Release 1.2(1a)
Defect ID
Description
CSCup22584
You will no longer experience any of OpenSSL security vulnerabilities disclosed June 5, 2014.
CSCun98825
You will no longer get a failure message when using virtual media in global service profile to access UCS Manager KVM.
CSCuo69498
Renaming global service profile in Cisco UCS Central will no longer create orphan service profiles in Cisco UCS Manager.
CSCun79562
KVM launch icon displays within the screen for all common resolution settings.
CSCun83267
When a server that is part of the server pool in Cisco UCS Central is removed from UCS Manager, after rediscovery, the object will again be available in UCS Central server pool.
CSCun97425
SNMP host name regex will allow valid FQDNs, such as foo.lbar.com.
CSCuo05212
Setting multi core processing setting to all in BIOS policy will no longer save as all.
CSCuo28184
If you create a locale with a same name as the org in a sub-org, the locale will no longer fail in UCS Central.
CSCuo30377
Service profile identity command will display all associated IDs in the service profile.
CSCuo57907
The Desired power state will be disabled on UCS Central GSP details page when the server is in associated state.
CSCuo71712
When external statistics database connectivity status is lost, statistics manager will no longer fail to refresh connection for the oracle database.
CSCup19840
User authentication will no longer fail in UCS Central after importing backup.
CSCup41374
If a vLAN name is 32 characters long, when you assign it with an IP address for in band management, the assignment will no longer fail.
CSCup62032
Global service profiles will pick unique management IP addressed from IP pool.
Open Caveats
The following caveats are open in Release 1.2(1f):
Table 7 Open Caveats in Release 1.2(1f)
Defect ID
Symptom
Workaround
CSCus84707
Sometimes you might come across issues such as vcon order not getting saved, or vcon changes from updating template does not get reflected to the service profile.
In the case of updating template vcon changes not getting applied, log in and logout of the UCS Central GUI.
CSCus93431
If you have Cisco UCS Manager 2.2(3x) in the registered UCS domain, if a local or global service profile uses boot policy with order "1. Later" defined in Cisco UCS Central, and you try to modify the boot policy in Cisco UCS Central to add a local disk, the san boot in the boot policy will be deleted in UCS Manager.
Modify the boot policy description and save the boot policy in UCS central. Then UCS Manager will have both SAN boot and local disk properly populated.
The following caveats are open in Release 1.2(1e):
Table 8 Open Caveats in Release 1.2(1e)
Defect ID
Symptom
Workaround
CSCun37681
Cisco UCS Central does not support DNS IP configuration for inband IPv4 and inband IPv6 addresses in global service profile.
Make sure to configure policies associated to a global service profile with Actual IP addresses and not host names.
The following caveats are open in Release 1.2(1d):
Table 9 Open Caveats in Release 1.2(1d)
Defect ID
Symptom
Workaround
CSCur64858
LDAP provider bind DN password does not accept special characters.
Do not use special characters for this password. This is resolved in release 1.3(1b).
The following caveats are open in Release 1.2(1a):
Table 10 Open Caveats in Release 1.2(1a)
Defect ID
Symptom
Workaround
CSCup85700
In some cases, after restoring backup, if you change the management IP address, logging into Cisco UCS Central from the GUI fails with the following message:
fail to get connector for application:mgmt-controller,ip address:xxxxxxx
Do the following to restart services:
Connect local-mgmt
Pmon restart
Known Limitations and Behaviors
The following known limitations and behaviors are not otherwise documented:
Table 11 Known Limitations in All Releases
Defect ID
Symptom
Workaround
CSCus21388
In a cluster set up, when the RDM link goes down on the primary node, DMEs cannot write to the database. This causes a crash on the primary node and failover to the subordinate node. The subordinate node takes over as the primary node. The database is then mounted in read-write mode on the new primary node. Because the RDM link is down, umount fails on the old primary node. When the RDM link comes up, the database is mounted on the old primary (current subordinate) node in read-only mode.
Restart pmon services on the current subordinate node or restart the node itself. Either of these processes will unmount the read-only partition and enable proper cleanup.
Related Documentation
For more information, you can access related documents from the following links:
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.