Cisco MDS 9000 Series Switches NX-OS System Messages Reference

AAA Messages

This section contains the AAA messages.

AAA-1

Explanation Aaa request rejected as the limit for maximum concurrent aaa sessions is reached

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

AAA-2

Explanation Upgrading of accounting log failed.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Aaa daemon is exiting.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

AAA-3

Explanation AAA Message

Recommended Action No action is required.

Explanation Nvram can not be read/written to. Hence accounting log can not be stored there

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

AAA-6

Explanation Accounting Message

Recommended Action No action is required.

AAA-7

Explanation AAA Debug Message

Recommended Action No action is required.

AAM Messages

This section contains the AAM messages.

AAM-2

Explanation Failed to lookup global port index for interface [chars]

Recommended Action No action is required.

AAM-3

Explanation AAM process could not allocate heap memory in File:[chars], at line:[dec], for memory-type:[dec] of Size:[dec]

Recommended Action No action is required.

Explanation AAM Process assertion failed in File:[chars], at line:[dec]

Recommended Action No action is required.

ACLLOG Messages

This section contains the ACLLOG messages.

ACLLOG-4

Explanation Max flow reached in current interval: [chars]

Recommended Action No action is required.

Explanation Threshold Reached for Flow: [chars]

Recommended Action No action is required.

ACLLOG-6

Explanation Flow info in current alert interval: [chars]

Recommended Action No action is required.

Explanation New Acllog Flow: [chars]

Recommended Action No action is required.

ACLMGR Messages

This section contains the ACLMGR messages.

ACLMGR-2

Explanation The PPF commit failed

Recommended Action No action is required.

Explanation Although an access-list operation failed during a port event, the port event still finished successfully because errdisable is not allowed

Recommended Action No action is required.

Explanation The ACLMGR service process has exited due to [char]. The process has probably been restarted automatically.

Recommended Action No action is required.

Explanation ACLMGR Service initialization failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation The ACLMGR service could not allocate memory.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation The ACLMGR service encountered error while operating on a persistent storage database.

Recommended Action No action is required.

ACLMGR-3

Explanation ACL PPF database lock acquire/release related message.

Recommended Action No action is required.

Explanation ACL snapshot to send the copy of runtime database to standby failed

Recommended Action No action is required.

Explanation The PPF generated error

Recommended Action No action is required.

Explanation The ACLMGR service has detected corruption in one of its persistent information database. The database would be recreated.

Recommended Action No action is required.

Explanation A statistic update failed during the parsing or consolidation step; statistics may have been lost

Recommended Action No action is required.

Explanation A VACL redirection to the port has been deactivated because the port has been removed

Recommended Action No action is required.

Explanation The PPF Verify failed

Recommended Action No action is required.

Explanation The PPF commit failed

Recommended Action No action is required.

Explanation ACLMGR Service encountered an MTS error. [chars] specifies the context where the error occurred.

Recommended Action No action is required.

ACLMGR-4

Explanation The PPF generated warning

Recommended Action No action is required.

Explanation A VACL redirection to the port has been temporarily deactivated because it is now a member in a port channel

Recommended Action No action is required.

Explanation There was a version mismatch between the ACLMGR service and one of its persistent storage databases. The persistent information has been translated to the new format.

Recommended Action No action is required.

ACLMGR-6

Explanation The PPF generated notification

Recommended Action No action is required.

Explanation The ACLMGR service on the standby supervisor became active and it is ready to serve client requests.

Recommended Action No action is required.

Explanation The ACLMGR service became standby from active mode.

Recommended Action No action is required.

Explanation The ACLMGR service was unable to send heartbeat to the system manger

Recommended Action No action is required.

Explanation The ACLMGR service is up and ready The service was initialized in [char] mode.

Recommended Action No action is required.

Explanation ACLMGR Service is shutting down gracefully. This is an informational message.

Recommended Action No action is required.

Explanation The ACLMGR service has successfully switched over to the standby supervisor card.

Recommended Action No action is required.

ACLQOS Messages

This section contains the ACLQOS messages.

ACLQOS-SLOT#-2

Recommended Action ACLQOS operation, in the ACLQOS client, has failed.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative representative with the information you have gathered.

Explanation Inband interface Loss of IMA Frame (LIF) lookup has failed.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative with the information you have gathered.

Explanation Memory allocation failed. This is a critical failure

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide your Cisco TAC representative with the information you have gathered.

Explanation The TCAM resources that are required to program ACLS have been exhausted.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative with the information you have gathered.

Explanation Database operation, in the ACLQOS client, has failed.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative with the information you have gathered.

ACLQOS-SLOT#-3

Explanation The congestion control parameters are invalid.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide your Cisco TAC representative with the information you have gathered.

Explanation The MCM message is inconsistent.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative with the information you have gathered.

Explanation The pause parameters are invalid.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative with the information you have gathered.

Explanation An internal error has occurred in the ACL QoS queuing configuration.

Recommended Action If the error persists, collect the output from the show tech-support aclqos command and provide the Cisco Technical Assistance Center (TAC) representative with the information you have gathered.

ACLQOS-SLOT#-4

Explanation TCAM will be overused,

Recommended Action Turn off the atomic update. The atomic update is currently enabled. It uses only 50% of TCAM size. For better utilization, either maintain the ACE which should not exceed this limit or can disable the atomic update mode.

Explanation TCAM is almost full

Recommended Action Warning message for TCAM is utilized for already configured features. Cannot add more result type.

Explanation Found stale FCoE entry in instance [dec]. VSAN: [dec], SID: 0x[hex], DID: 0x[hex], SI:[dec], SI_MASK:[dec], RW_VSAN:[dec], RW_VSAN_FLAG: [dec], RW_SID: 0x[hex], RW_SID_FLAG:[dec], RW_DID: 0x[hex]. RW_DID_FLAG: [dec] Cleaning it up.

Recommended Action No DDTS.

Explanation Warning (match_all merging)

Recommended Action No DDTS.

Explanation Tcam is almost full

Recommended Action No DDTS.

Explanation Attempted to configure an invalid queuing policy

Recommended Action No DDTS.

Explanation Attempted to configure an invalid queuing policy

Recommended Action No DDTS.

Explanation Tcam's usage is below the threshold

Recommended Action No DDTS.

Explanation ACLQOS Warnings

Recommended Action No DDTS.

ACLQOS-SLOT#-5

Explanation Disruptive IPv6 compression entries update

Recommended Action No DDTS.

Explanation Non atomic ACL/QoS policy update was done

Recommended Action No DDTS.

ACLTCAM Messages

This section contains the ACLTCAM messages.

ACLTCAM

Explanation TCAM usage crossed 80% in the module, direction, region, and forwarding engine listed. This system message does not indicate that TCAM was exhausted or any TCAM programming failed.

Recommended Action Use the show system internal acl tcam-usage command to display the ACLTCAM usage. Ensure that zoning and port-channel member interface allocations are adhering to the best practices outlined in the “Zoning Best Practice” section under the “Configuring and Managing Zones” chapter of the Cisco MDS 9000 Series NX-OS Fabric Configuration Guide.

Explanation TCAM usage fell below the 80% threshold in the module, region, direction, and forwarding engine indicated.

Recommended Action Use the show system internal acl tcam-usage command to display the ACLTCAM usage. Ensure that zoning and port-channel member interface allocations are adhering to the best practices outlined in the “Zoning Best Practice” section under the “Configuring and Managing Zones” chapter of the Cisco MDS 9000 Series NX-OS Fabric Configuration Guide.

Explanation Overall TCAM usage indicated in the forwarding engine crossed 60% in the module, direction, and forwarding engine indicated. This system message does not indicate that TCAM was exhausted or any TCAM programming failed.

Recommended Action Use the show system internal acl tcam-usage command to display the ACLTCAM usage. Ensure that zoning and port-channel member interface allocations are adhering to the best practices outlined in the “Zoning Best Practice” section under the “Configuring and Managing Zones” chapter of the Cisco MDS 9000 Series NX-OS Fabric Configuration Guide.

Explanation Overall TCAM usage indicated in the forwarding engine fell below 60% in the module, direction, and forwarding engine indicated.

Recommended Action Use the show system internal acl tcam-usage command to display the ACLTCAM usage. Ensure that zoning and port-channel member interface allocations are adhering to the best practices outlined in the “Zoning Best Practice” section under the “Configuring and Managing Zones” chapter of the Cisco MDS 9000 Series NX-OS Fabric Configuration Guide.

ACLTCAM-2

Explanation ACLTCAM process experienced a failure while programming route for VSAN [dec] SID [chars] DID [chars] due to resource exhaustion. [chars] is the error code.

Recommended Action If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars]

Recommended Action No action is required. This is a warning message that indicates the TCAM has reached some threshold value.

Explanation Unable to read configuration from forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].

Recommended Action This could be a hardware issue with forwarding instance. If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation Unable to write configuration to forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].

Recommended Action This could be a hardware issue with forwarding instance. If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation Hardware flow stats read failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).

Recommended Action No action is required. This message indicates that a show command failed for getting flow statistics.

Explanation Initialization failed for forwarding engine ASIC [dec], in [chars] TCAM.

Recommended Action Restart the process. If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation Initialization of regions failed for forwarding engine ASIC [dec], in [chars] TCAM, for [chars] Region.

Recommended Action Restart the process. If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation Memory allocation is failed for size [dec] bytes.

Recommended Action Restart the process. If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation MTS operation failed. [chars] is the reason.

Recommended Action No action is required. This error is reported to an app and the app takes the required action.

Explanation MTS queue for SAP [dec] is full

Recommended Action No action is required. This error is reported to an app and the app takes the required action.

Explanation MTS registration failed for opCode: [dec].

Recommended Action No action is required. The process aborts when it hits this error.

Explanation ACLTCAM process experienced a failure while getting route for VSAN [dec] Rewrite [chars] DID [chars] DID Mask [chars]. [hex] is the error code.

Recommended Action No action is required.

Explanation ACLTCAM hardware resource is completely used.

Recommended Action No action is required. This error is reported to an app and the app takes the required action.

Explanation [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).

Recommended Action No action is required. The process aborts when it hits this error.

Explanation Invalid ([chars], value: [dec]) TCAM entry from hardware TCAM(FWD-Engine: [dec], [chars] TCAM, Address: [dec]) Ignoring this entry

Recommended Action No action is required.

Explanation [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).

Recommended Action No action is required. This error is reported to an app and the app takes the required action.

Explanation Failed to do PSS operation [chars]. [hex] is the reason.

Recommended Action Restart the process. If the error persists, collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation Persistent database handle could not obtained for ACLTCAM. [hex] is the error.

Recommended Action No action is required.

Explanation During non-disruptive upgrade, the ACLTCAM contents are not properly reconstructed. [hex] is the error.

Recommended Action No action is required. The process aborts when it hits this error.

ACLTCAM-3

Explanation TL Port Manager initialization failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation Possible MTS buffer leak for SAP [dec]

Recommended Action Collect the output from the show tech-support acltcam command and provide the Cisco Technical Assistance Center (TAC) representative with the information you gathered.

Explanation TL Port Manager is out of dynamic memory. [chars] specifies the context where the failure occurred.

Recommended Action No action is required.

Explanation TL Port Manager encountered an FC2 error. [chars] specifies the context where the error occurred.

Recommended Action No action is required.

Explanation TL Port Manager encountered a general error, one that does not fall in any of the above categories. [chars] describes the error and its context.

Recommended Action No action is required.

Explanation TL Port Manager encountered an MTS error. [chars] specifies the context where the error occurred.

Recommended Action No action is required.

Explanation TL Port Manager encountered a PSS error. [chars] specifies the context where the failure occurred.

Recommended Action No action is required.

Explanation ACLTCAM process could not register to the notifications mentioned by [chars]. [hex] is the error.

Recommended Action No action is required. The process aborts when it hits this error.

ACLTCAM-4

Explanation [chars] TCAM usage [dec]/[dec] fell below [dec] percent on fwd-engine [dec], [chars]

Recommended Action No action is required. This is a warning message that indicates the TCAM has crossed the first threshold value.

Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars]

Recommended Action No action is required. This error is reported to an app and the app takes the required action.

Explanation ACLTCAM process invalidated the flow counter for flow VSAN [dec] SID [hex] DID [hex] with collected stats of [dec] frames and [dev] bytes was invalidated because of reason [[chars]].

Recommended Action No action is required. This message notifies that the counter is now active.

Explanation ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID [hex].

Recommended Action No action is required.

Explanation MTS queue for SAP [dec] is close to full

Recommended Action No action is required.

Explanation TL Port cache is currently fully populated with active entries. Hence, there is no available cache space to be assigned any newly created ALPA entry on a TL Port. This is an informational message.

Recommended Action No action is required.

ACLTCAM-6

Explanation ACLTCAM status is reported as: [chars].

Recommended Action No action is required. This error is reported to an app and the app takes the required action.

Explanation TL Port Manager was created successfully and is up and running. This is an informational message.

Recommended Action No action is required.

Explanation TL Port Manager is shutting down gracefully. This is an informational message.

Recommended Action No action is required.

Explanation A port configured as TL Port is DOWN and out of operation. [chars] is the interface-id string that identifies the TL Port. This is an informational message.

Recommended Action No action is required.

Explanation A port configured as TL Port is UP and operational. [chars] is the interface-id string that identifies the TL Port. This is an informational message.

Recommended Action No action is required.

ACL Messages

This section contains the ACL messages.

ACL-2

Explanation Failed to do high availability operation. [chars] is the reason.

Recommended Action No action is required.

Explanation Initialization failed for ACL due to [chars], reason: [hex].

Recommended Action No action is required.

Explanation Status from linecard: [dec], for module: [chars] (ID: [dec]), status: [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].

Recommended Action No action is required.

Explanation Failed to do MTS operation. [chars] is the reason.

Recommended Action No action is required.

Explanation MTS queue for SAP [dec] is full

Recommended Action No action is required.

Explanation MTS options setting to [hex] failed for opCode: [dec].

Recommended Action No action is required.

Explanation ACL Upgrade Pending Messages Array is Full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex]

Recommended Action No action is required.

Explanation Failed to do PSS operation [chars]. [hex] is the reason.

Recommended Action No action is required.

Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] the expected version.

Recommended Action No action is required.

Explanation ACL runtime failure is reported as [chars] [dec], reason: [hex].

Recommended Action No action is required.

Explanation Failed to do TCAM operation. [chars] is the reason.

Recommended Action No action is required.

ACL-3

Explanation Possible MTS buffer leak for SAP [dec]

Recommended Action No action is required.

ACL-4

Explanation MTS queue for SAP [dec] is close to full

Recommended Action No action is required.

Explanation ACL warning messages is reported as [chars] [dec].

Recommended Action No action is required.

ACL-5

Explanation Successfully completed the command \[chars]\ on Generation 2 linecards.

Recommended Action No action is required.

ACL-6

Explanation ACL system health management event status is reported as [chars] [hex].

Recommended Action No action is required.

Explanation ACL xEport event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL FCC event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL linecard event status is reported as [chars] [dec].

Recommended Action No action is required.

Explanation ACL multicast event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL Nx Port event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL portmode event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL runtime status is reported as [chars] [dec].

Recommended Action No action is required.

Explanation ACL SPAN destination config event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL SPAN source config event status is reported as [chars] [chars].

Recommended Action No action is required.

Explanation ACL status is reported as [chars].

Recommended Action No action is required.

Explanation ACL update SSRAM for QoS event status is reported as [chars] [chars].

Recommended Action No action is required.

AGNI-DPP Messages

This section contains the AGNI-DPP messages.

AGNI-DPP-2

Explanation Print a string and 1 value

Recommended Action No action is required.

Explanation Print a string and 1 value

Recommended Action No action is required.

Explanation Print a string and 1 value

Recommended Action No action is required.

Explanation Print a string and 1 value

Recommended Action No action is required.

Explanation Print a string

Recommended Action No action is required.

AGNI-DPP-6

Explanation Debug log message

Recommended Action No action is required.

AGNIL2F Messages

This section contains the AGNIL2F messages.

AGNIL2F-6

Explanation Debug log message

Recommended Action No action is required.

ALI_LC Messages

This section contains the ALI_LC messages.

ALI_LC-2

Explanation Initialization failed

Recommended Action No action is required.

Explanation An Internal port number [dec] on the board has failed due to reason [chars]. The corresponding ethernet port may become unusable

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An Internal port number [dec] on the board was reinitialized due to reason [chars]. The corresponding ethernet port may experience some packet drops

Recommended Action No action is required.

Explanation MTS send/receive failed

Recommended Action No action is required.

Analytics Messages

This section contains the SAN Analytics and SAN Telemetry Streaming messages.

ANALYTICS-3-FTMGR_MOD_EXCESS_ITLS

Explanation There is a limit on the maximum number of ITLs that the SAN Analytics feature supports per module and per switch. For more information, see the Cisco MDS NX-OS Configuration Limits, Release 8.x.

Recommended Action Please reduce the number of ports on which Analytics is enabled in the module indicated. Run the show running-config analytics command, to get Analytics enabled interface ports. Run the show analytics system-load command, to verify the system load count in each module.

Caution If the ITL count exceeds the maximum limit, a syslog will be generated and the normal functioning of the switch may be impacted. We recommend that you configure the logging level analytics 4 command immediately after configuring the SAN Analytics feature for this syslog to be logged on the switch.

---

ANALYTICS-3-FTMGR_SYS_EXCESS_ITLS

Explanation There is a limit on the maximum number of ITLs that the SAN Analytics feature supports per module and per switch. For more information, see the Cisco MDS NX-OS Configuration Limits, Release 8.x.

Recommended Action Please reduce the number of ports on which Analytics is enabled in the switch. Run the show running-config analytics command, to get Analytics enabled interface ports. Run the show analytics system-load command, to verify the ITLs count in the switch.

Caution If the ITL count exceeds the maximum limit, a syslog will be generated and the normal functioning of the switch may be impacted. We recommend that you configure the logging level analytics 4 command immediately after configuring the SAN Analytics feature for this syslog to be logged on the switch.

---

ANALYTICS-4-FTMGR_MOD_HIGH_NPU_LOAD

Explanation Switch is experiencing high NPU load per module and across the switch.

Recommended Action Please reduce the number of ports on which Analytics is enabled in the module indicated or enable Port Sampling. Run the show running-config analytics command, to get Analytics enabled interface ports. Run the show analytics system-load command, to verify the ITLs count in each module. For more information on Port Sampling, see the “Port Sampling” section in the Cisco MDS 9000 Series SAN Analytics and SAN Telemetry Streaming Configuration Guide.

Caution If the NPU load is high, NPU may not inspect all the IOs and the metrics reported can be inaccurate. We recommend that you configure the logging level analytics 4 command immediately after configuring the SAN Analytics feature for this syslog to be logged on the switch.

---

ANALYTICS_LC_MGR-SLOT1-4-ANALYTICS_LC_MGR_4K_ITL_LIMIT_HIT

Explanation Analytics data may be incomplete on few ports: Affected ports are [chars],[chars],[chars],[chars].

Recommended Action Refer to the Cisco documentation about 4000 ITL limit for additional details. For more information, see the Cisco MDS 9000 Series SAN Analytics and SAN Telemetry Streaming Configuration Guide.

ANALYTICS-5-FTMGR_QUERY_CLEAR_OPTION_CONFLICT

Explanation Clear option in a push query affects the results of some metrics for other queries of the same view.

Recommended Action Please do not execute a pull query for view on which a push query is already installed with clear option.

ANALYTICS_CLIENT-SLOT#-2-NPU_HUNG_TIMER_EXPIRED

Explanation The NPU on the named module did not respond to a request within the expected time frame.

Recommended Action The status of the NPU on this module should be checked. The module may need to be reloaded to restart the NPU. Please collect the output of the show tech-support analytics command and contact your reseller or Cisco TAC for support.

AMM Messages

This section contains the AMM messages.

AMM-SLOT#-0

Explanation AMM failed to initialize CLI infrastructure\sbackendlibrary.This is a fatal error.

Recommended Action No action is required.

Explanation AMM failed to initialize timer library. This is a fatal error.

Recommended Action No action is required.

AMM-SLOT#-2

Explanation Memory allocation failed. This is a critical failure

Recommended Action No action is required.

Explanation AMM failed to recover after a re-start. This is a fatal error.

Recommended Action No action is required.

AMM-SLOT#-6

Explanation AMM has created its internal state stateless/stateful [chars].

Recommended Action No action is required.

APP EMULATOR Messages

This section contains the APP EMULATOR messages.

APP EMULATOR-SLOT#-5

Explanation The DPP associated with the Virtual Target has crashed

Recommended Action No action is required.

Explanation The activate step for a Virtual Target has failed

Recommended Action No action is required.

Explanation The Virtual Target and nport creation failed

Recommended Action No action is required.

Explanation The Virtual Target in the associated VSAN is being destroyed

Recommended Action No action is required.

Explanation The VSAN where the Virtual Target is configured is down

Recommended Action No action is required.

ARBITER Messages

This section contains the ARBITER messages.

ARBITER-2

Explanation Arbiter triggered Catastrophic error interrupt

Recommended Action Please contact your support representative

Explanation Arbiter failed built in self test

Recommended Action Please contact your support representative

ASCII-CFG Messages

This section contains the ASCII-CFG messages.

ASCII-CFG-2

Explanation At least one command failed while ASCII configuration was being applied

Recommended Action No action is required.

Explanation Error encountered while library function was being invoked to display ASCII configuration

Recommended Action No action is required.

Explanation Operation failed

Recommended Action No action is required.

Explanation Rollback operation failed for atomic option

Recommended Action No action is required.

Explanation Undoing the rollback changes (for atomic behavior) Failed

Recommended Action No action is required.

Explanation Error encountered while Initializing Syslog for ASCII Config

Recommended Action No action is required.

Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] the expected version

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

ASCII-CFG-3

Explanation ASCII-cfg-server (rollback process) encountered an MTS error. [chars] specifies the context where the error occurred.

Recommended Action No action is required.

ASCII-CFG-6

Explanation Cleared all the configuration checkpoints

Recommended Action No action is required.

Explanation Created configuration checkpoint

Recommended Action No action is required.

Explanation Deleted configuration checkpoint

Recommended Action No action is required.

Explanation Maximum no.of checkpoints reached, removing the oldest checkpoint

Recommended Action No action is required.

Explanation Performing configuration rollback with atomic option

Recommended Action No action is required.

Explanation Performing configuration rollback with best-effort option

Recommended Action No action is required.

Explanation Performing configuration rollback with stop-at-first-failure option

Recommended Action No action is required.

Explanation An event happened that affects Acfg-Rollback. [chars] indicates the event

Recommended Action No action is required.

Explanation An error occurred during an Acfg PSS operation. [chars] indicates the PSS operation that caused the error

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

ASSOC MGR Messages

This section contains the ASSOC MGR messages.

ASSOC MGR-0

Explanation Association Manager Emergency Message

Recommended Action Please file the bug for Association Manager Component through CDETS

ASSOC MGR-1

Explanation Association Manager Alert Message

Recommended Action Association Manager Internal Operation Alert

ASSOC MGR-2

Explanation Association Manager Critical Message

Recommended Action No action is required.

ASSOC MGR-3

Explanation Association Manager Message

Recommended Action No action is required.

ASSOC MGR-4

Explanation Association Manager Warning Message

Recommended Action No action is required.

ASSOC MGR-5

Explanation Association Manager Notification Message

Recommended Action No action is required.

ASSOC MGR-6

Explanation Association Activated

Recommended Action No action is required.

Explanation Association Created

Recommended Action No action is required.

Explanation Association Deactivated

Recommended Action No action is required.

Explanation Association Deleted

Recommended Action No action is required.

Explanation Association Manager Stateful Restart

Recommended Action No action is required.

Explanation Association Manager Stateless Restart

Recommended Action No action is required.

Explanation Association Operational State Change

Recommended Action No action is required.

Explanation ASSOC Manager Informational Message

Recommended Action No action is required.

ASSOC MGR-7

Explanation Association Manager Debug Message

Recommended Action No action is required.

ATLANTIS_APP Messages

This section contains the ATLANTIS_APP messages.

ATLANTIS_APP-SLOT#-2

Explanation Atlantis driver application exited

Recommended Action No action is required.

AUTHPRIV Messages

Explanation This message provides additional information about errors related to authentication and SSH.

Recommended Action Perform additional debugging to resolve the issue.

AZUMA Messages

This section contains the AZUMA messages.

AZUMA-2

Explanation DPFPGA hardware initialization failure. If hardware configure fails, please do the parallel epld upgrade again.

AZUMA-6

Explanation Debug log message

Recommended Action No action is required.

BET Messages

This section contains the BET messages.

BET-6

Explanation Debug log message

Recommended Action No action is required.

BFDC Messages

This section contains the BFDC messages.

BFDC-SLOT#-2

Explanation General failure. This is a critical failure

Recommended Action No DDTS.

Explanation Memory allocation failed. This is a critical failure

Recommended Action No DDTS.

Explanation MTS related failure. This is a critical failure

Recommended Action No DDTS.

BFD Messages

This section contains the BFD messages.

BFD-3

Explanation BFD session [chars] creation on interface [chars] failed due to current capacity limit [dec]

Recommended Action Please remove current BFD sessions to make room for new ones

Explanation BFD session [chars] installation failed due to ACL installation failure interface [chars

Recommended Action Maximum ACL install retries exceeded. Please to free up ACL resources

Explanation BFD session [chars] removal failed due to ACL removal failure interface [chars]

Recommended Action Maximum ACL removal retries exceeded. Please manually remove BFD sessions

Explanation Failed to create BFD session to neighbor [chars] over interface [chars] Reason [chars]

Recommended Action SYSLOGDPC_NO_ACTION

BFD-4

Explanation Attempt to BFD session failed for application [chars].

Recommended Action No action is required.

Explanation Attempt to delete BFD session for neighbor [chars] failed: Reason [chars] (0x[hex]).

Recommended Action No action is required.

BFD-5

Explanation BFD Service Disabled

Recommended Action No action is required.

Explanation BFD Service enabled

Recommended Action No action is required.

Explanation Local parameter of BFD session 0x[hex] has changed [chars]

Recommended Action No action is required.

Explanation BFD session to neighbor [chars] on interface [chars]

Recommended Action No action is required.

Explanation Local parameter of BFD session 0x[hex] has changed [chars]

Recommended Action No action is required.

Explanation BFD session 0x[hex]: [chars]

Recommended Action No action is required.

Explanation The BFD session can not be created or modified due to lack of resources. [It has reached the maximum number of packets per second allowed on the linecard.] No resources for session to neighbor [chars]

Recommended Action Remove other BFD sessions [or reduce the Tx/Rx timers] to free resources for this session

Explanation BFD session to neighbor [chars] on interface [chars]

Recommended Action No action is required.

Explanation BFD session [chars] to neighbor [chars] on interface [chars] has gone down. Reason: 0x[hex]. This may be as a result of the forwarding path being down.

Recommended Action No action is required.

Explanation BFD session [chars] to neighbor [chars] on interface [chars] is up.

Recommended Action No action is required.

BFD-6

Explanation BFD session [chars] failed due to missing ACL resources for interface [chars]

Recommended Action No action is required.

Explanation BFD session [chars] removal failed due to missing ACL resources for interface [chars]

Recommended Action No action is required.

BIOS DAEMON Messages

This section contains the BIOS DAEMON messages.

BIOS DAEMON-2

Explanation BIOS CHIP NOT SUPPORTED

Recommended Action No action is required.

Explanation Boot from Alternate

Recommended Action SYSLOGDOC_NOACTION

Explanation BIOS WRITE PROTECTED

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

BIOS DAEMON-5

Explanation Boot from Primary

Recommended Action SYSLOGDOC_NOACTION

BIOS DAEMON-SLOT#-2

Explanation BIOS WRITE PROTECTED

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Boot from Alternate

Recommended Action SYSLOGDOC_NOACTION

BIOS DAEMON-SLOT#-5

Explanation Boot from Primary

Recommended Action SYSLOGDOC_NOACTION

BLOGGERD Messages

This section contains the BLOGGERD messages.

BLOGGERD-2

Explanation Blogger Log Transfer has been error disabled

Recommended Action Please collect BloggerD tech support using ''show tech bloggerd-all''

BLOGGERD-3

Explanation Invalid VDC ID

Recommended Action Please collect BloggerD tech support using ''show tech bloggerd-all''

Explanation Log Dump Throttled

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation Move Log Script Not Found

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation Required Path Not Found

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation Blogger Config Pull Failed

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation MTS not dropped

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation PSS Operation Failed

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation SDWrap Debug Init failed

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation Thread Creation Failed

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

BLOGGERD-4

Explanation Flow Control Enabled. Transfer from Modules temporarily suspended

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

Explanation Flow Control Reset. Transfer from Modules re-enabled

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

BLOGGERD-6

Explanation Info

Recommended Action Please collect BloggerD tech support using “show tech bloggerd-all''

BOOTUP TEST Messages

This section contains the BOOTUP TEST messages.

BOOTUP TEST-2

Explanation Online diagnostics EOBC test has failed

Recommended Action No action is required.

Explanation Online diagnostics Management Port test has failed

Recommended Action No action is required.

Explanation Online diagnostics Management Port test has failed

Recommended Action No action is required.

Explanation Online diagnostics Management Port test is skipped

Recommended Action No action is required.

BOOTVAR Messages

This section contains the BOOTVAR messages.

BOOTVAR-2

Explanation The service failed to allocate memory.

Recommended Action Check if the system is low on memory, if so reset the switch.

Explanation The image deemed to be copied to standby via the auto-copy feature failed.

Recommended Action Check error id for specified reason.

Explanation Image synchronization failed.

Recommended Action Check that there is enough space on the flash, as well as system high availability status.

Explanation An error has occurred during the update of the boot configuration files

Recommended Action Check that there is enough space on the flash, show boot to check the configured image names, show loader internal configuration to compare them with the current bootloader configuration, if they are not coherent do write erase and retry to save the configuration.

Explanation The input image name is not compatible with the current platform.

Recommended Action Make sure a right image is specified before reboot.

BOOTVAR-3

Explanation There is not enough disk space on the standby for the file to be copied.

Recommended Action Clear space on the standby disk.

Explanation The service failed to start The failure occurs during initialization of the component [chars].

Recommended Action Show processes to check the status of the other processes, pay attention to the specified component.

Explanation Failed to load bootvar specified verification library.

Recommended Action No action is required.

Explanation Unable to acquire modlock to prevent user to reload during auto-sync.

Recommended Action No action is required.

Explanation Standby supervisor does not support auto-copy, thus failed.

Recommended Action No action is required.

Explanation The image set for this bootvar has failed the verification process, this is just a warning.

Recommended Action Check reason to determine actions.

BOOTVAR-5

Explanation Auto copy of the file succeed, image integrity verified by standby.

Recommended Action No action is required.

Explanation Upon copied the image to standby, failed to send message to ask standby to verify integrity.

Recommended Action Turn auto-copy off and back on.

Explanation The image synchronization done successfully.

Recommended Action No action is required.

Explanation Image autosync has been successful, resetting the standby supervisor to load the new image.

Recommended Action Check that the standby sup reloads correctly.

Explanation The standby-sup has requested the sync of the current image.

Recommended Action No action is required.

Explanation The input image name doesn't exist on the specified supervisor.

Recommended Action Check whether the input image name you entered exists and make sure that you have the image on the flash before reboot.

Explanation Info log reporting standby support of auto-copy. Auto-copy is being started.

Recommended Action No action is required.

BOOTVAR-6

Explanation No need to update the image on the standby-sup.

Recommended Action No action is required.

Explanation Autocopy of the file did not start as the remote copy location does not exist

Recommended Action No action is required.

Explanation The boot-loader configuration files have been successfully updated.

Recommended Action No action is required.

Explanation The service has successfully started.

Recommended Action No action is required.

CALLHOME Messages

This section contains the CALLHOME messages.

CALLHOME-2

Explanation Callhome event [chars] occurred.

Recommended Action If you have configured your email address to receive callhome notifications, please check your email for more details about this callhome event. If callhome was not enabled, please execute CLI commands relevant to the callhome event to get more information about the error

Explanation Callhome process is exiting with reason [chars].

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CALLHOME-3

Explanation [chars1]

Recommended Action Please check the reason for the failure of the cfs operation and rectify the problem

Explanation [chars1] [chars2]

Recommended Action Please check the reason for the failure of the cfs operation and rectify the problem

Explanation [chars]

Recommended Action Please check the reason for the generation of the Callhome messages and rectify the problem

Explanation Error in processing callhome event [chars] reason:[chars]

Recommended Action Please check your callhome configuration for proper configuration. Please check SMTP server address, email addresses for destination profiles and enable status of callhome. Use “show callhome” commands for displaying configuration.

Explanation Message size for callhome alert:[chars] exceeds maximum limit for destination profile:[chars]

Recommended Action Please check the maximum message size for the destination profile under question. Increase it if possible to match the maximum limit allowed by your email destinations.

CALLHOME-6

Explanation Non-critical Callhome event [chars] occurred.

Recommended Action If you have configured your email address to receive callhome notifications, please check your email for more details about this callhome event. If callhome was not enabled, please execute CLI commands relevant to the callhome event to get more information about the error

CARDCLIENT Messages

This section contains the CARDCLIENT messages.

CARDCLIENT-2

Explanation CardClient Critical Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Online Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardClient Console Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardClient Console Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CARDCLIENT-3

Explanation CardClient Error

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardClient Flow Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CARDCLIENT-SLOT#-2

Explanation CardClient Remote Syslog msg

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardClient Remote Syslog msg

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CDP Messages

This section contains the CDP messages.

CDP-2

Explanation CDP Daemon Initialization failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

CDP-3

Explanation CDP Daemon is out of dynamic memory. [chars] specifies the context where the failure occurred.

Recommended Action No action is required.

Explanation CDP Daemon encountered a general error, one that does not fall in any of the above categories. [chars] describes the error and its context.

Recommended Action No action is required.

Explanation An attempt to register for packets destined to the CDP multicast address failed. [dec] identifies the interface [char] identifies the reason.

Recommended Action No action is required.

Explanation CDP Daemon encountered an MTS error. [chars] specifies the context where the error occurred.

Recommended Action No action is required.

Explanation Failed to receive packet. [char] identifies the reason.

Recommended Action No action is required.

Explanation Failed to send packet. [dec] identifies the interface [char] identifies the reason.

Recommended Action No action is required.

Explanation CDP Daemon encountered a PSS error. [chars] specifies the context where the failure occurred.

Recommended Action No action is required.

Explanation Failed to bind to raw socket. [dec] identifies the interface [char] identifies the reason.

Recommended Action No action is required.

Explanation An attempt to open a socket for receiving raw 802_2 packets failed. [char] identifies the reason.

Recommended Action No action is required.

CDP-4

Explanation Duplex mismatch discovered from the received cdp packet This is a warning message.

Recommended Action No action is required.

Explanation Native VLAN mismatch discovered This is a warning message.

Recommended Action No action is required.

CDP-5

Explanation CDP is disabled on the device.

Recommended Action No action is required.

Explanation CDP is enabled on the device.

Recommended Action No action is required.

Explanation Discovered a neighbor device. This is an informational message.

Recommended Action No action is required.

Explanation Deleted a neighbor device. This is an informational message.

Recommended Action No action is required.

CDP-6

Explanation CDP Daemon was created successfully and is up and running. This is an informational message.

Recommended Action No action is required.

Explanation CDP Daemon is shutting down gracefully. This is an informational message.

Recommended Action No action is required.

Explanation CDP was disabled on a given port. [chars] is the interface-ID string that identifies the port. This is an informational message.

Recommended Action No action is required.

Explanation A CDP enabled port is not operational. [chars] is the interface-ID string that identifies the port. This is an informational message.

Recommended Action No action is required.

Explanation CDP was enabled on a given port. [chars] is the interface-ID string that identifies the port. This is an informational message.

Recommended Action No action is required.

Explanation A CDP enabled port became operational. [chars] is the interface-ID string that identifies the port. This is an informational message.

Recommended Action No action is required.

CERT_ENROLL Messages

This section contains the CERT_ENROLL messages.

CERT_ENROLL-2

Explanation Cert_enroll daemon is exiting.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CERT_ENROLL-3

Explanation CERT_ENROLL Message

Recommended Action No action is required.

Explanation FIPS mode initialization error

Recommended Action No action is required.

CERT_ENROLL-6

Explanation CERT_ENROLL Message

Recommended Action No action is required.

CFGD Messages

This section contains the CFGD messages.

CFGD-SLOT#-2

Explanation Component caused critical error

Recommended Action Restart the linecard.

CFS Messages

This section contains the CFS messages.

CFS-2

Explanation This messages provides the details of the reject.

Recommended Action Login to the switch with the addresses specified and check the status of the application that is specified in the message.

Explanation This message is logged when a remote switch rejects the lock.

Recommended Action Login to the switch with the addresses specified and check the status of the application that is specified in the message.

Explanation This message is logged when a remote switch rejects the lock.

Recommended Action Login to the lock holding switch and check the status of the application specified.

Explanation The number of peers has crossed the supported configuration limit as a result of CFS discovery.

Recommended Action Reduce the number of peers to within the limit.

CFS-3

Explanation The CFS service has detected a merge failure.

Recommended Action Check the status of the application specified in the local and remote switches.

Explanation The CFS service has detected a merge failure.

Recommended Action Check the status of the application that is specified in the local and remote switches.

CFS-6

Explanation This is an informational message only.

Recommended Action No action is required.

Explanation This is an informational message.

Recommended Action No action is required.

Explanation CFS Service was created successfully and is up and running.

Recommended Action This is an informational message. No action is required.

CIMSRVPROV Messages

This section contains the CIMSRVPROV messages.

CIMSRVPROV-2

Explanation Exit due to critical error

Recommended Action No action is required.

Explanation PSS snapshot error

Recommended Action No action is required.

Explanation Debug infrastructure error

Recommended Action No action is required.

CIMSRVPROV-3

Explanation Copy running startup error

Recommended Action No action is required.

Explanation File handling error

Recommended Action No action is required.

Explanation MTS message handling error

Recommended Action No action is required.

Explanation PSS handling error

Recommended Action No action is required.

CIMSRVPROV-6

Explanation Cleared a certificate named [chars].

Recommended Action No action is required.

Explanation Installed a certificate named [chars].

Recommended Action No action is required.

CLIS Messages

This section contains the CLIS messages.

CLIS-5

Explanation Command removal due to configuration change

Recommended Action No action is required.

CLIS-6

Explanation Command removal due to configuration change

Recommended Action No action is required.

CLK_MGR Messages

This section contains the CLK_MGR messages.

CLK_MGR-2

Explanation CLK_MGR fc2 clock synchronization critical error

Recommended Action No action is required.

CLK_MGR-5

Explanation CLK_MGR clock is synchronized by [chars] from VDC

Recommended Action No action is required.

CLK_MGR-6

Explanation CLK_MGR timestamp checks disabled

Recommended Action No action is required.

Explanation CLK_MGR timestamp checks enabled

Recommended Action No action is required.

CLOUD Messages

This section contains the CLOUD messages.

CLOUD-2

Explanation Cloud-discovery process is exiting with reason [chars].

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CLOUD-3

Explanation [chars1]

Recommended Action Please check the reason for the failure of the cfs operation and rectify the problem

Explanation [chars1] [chars2]

Recommended Action Please check the reason for the failure of the cfs operation and rectify the problem

Explanation [chars1] [chars2]

Recommended Action Please check the reason for error using feature manager and rectify the problem

Explanation [chars1] [chars2]

Recommended Action Please check the reason for the failure of the pss operation and rectify the problem

CLOUD-6

Explanation Cloud-discovery started

Recommended Action Check cloud membership

Explanation Cloud-discovery started

Recommended Action Check cloud-discovery status after sometime

CLP_FWD Messages

This section contains the CLP_FWD messages.

CLP_FWD-6

Explanation Debug log message

Recommended Action No action is required.

CLP_L3 Messages

This section contains the CLP_L3 messages.

CLP_L3-6

Explanation Debug log message

Recommended Action No action is required.

CLP_MAC Messages

This section contains the CLP_MAC messages.

CLP_MAC-6

Explanation Debug log message

Recommended Action No action is required.

CLP_XBAR Messages

This section contains the CLP_XBAR messages.

CLP_XBAR-2

Explanation Clipper received packets with CRC error from fabric

Recommended Action No action is required.

CLP_XBAR-6

Explanation Debug log message

Recommended Action No action is required.

CLUSTER_TEST_APP Messages

This section contains the CLUSTER_TEST_APP messages.

CLUSTER_TEST_APP-5

Explanation CLUSTER_TEST_APP Service Disabled

Recommended Action No action is required.

Explanation CLUSTER_TEST_APP Service enabled

Recommended Action No action is required.

Explanation CLUSTER_TEST_APP Test started

Recommended Action No action is required.

Explanation CLUSTER_TEST_APP Test stopped

Recommended Action No action is required.

CLUSTER Messages

This section contains the CLUSTER messages.

CLUSTER-2

Explanation Cluster capability addition failed

Recommended Action No action is required.

Explanation Cluster capability deletion failed

Recommended Action No action is required.

Explanation Cluster capability deletion failed

Recommended Action No action is required.

Explanation Cluster Config Manager failed

Recommended Action No action is required.

Explanation Cluster database synchronization failed

Recommended Action No action is required.

Explanation Cluster database synchronization failed

Recommended Action No action is required.

Explanation Cluster database synchronization failed

Recommended Action No action is required.

Explanation Cluster database synchronization failed

Recommended Action No action is required.

Explanation Received Bad Leave response

Recommended Action No action is required.

Explanation Node is not part of cluster

Recommended Action No action is required.

Explanation Cluster RGC transaction failed

Recommended Action No action is required.

Explanation Cluster transport failed to send message

Recommended Action No action is required.

CLUSTER-5

Explanation Cluster Added

Recommended Action No action is required.

Explanation CLUSTER Service Disabled

Recommended Action No action is required.

Explanation CLUSTER Service Enabled

Recommended Action No action is required.

Explanation Node added to cluster

Recommended Action No action is required.

Explanation Node joined cluster

Recommended Action No action is required.

Explanation Remote Node Left voluntarily

Recommended Action No action is required.

Explanation Node not in cluster

Recommended Action No action is required.

Explanation Node removed from cluster

Recommended Action No action is required.

Explanation Cluster removed

Recommended Action No action is required.

Explanation Cluster received JOIN request

Recommended Action No action is required.

Explanation Cluster received JOIN response

Recommended Action No action is required.

Explanation Cluster received PROBE message

Recommended Action No action is required.

Explanation CLUSTER Started

Recommended Action No action is required.

Explanation CLUSTER Stopped

Recommended Action No action is required.

Explanation Cluster Transport Connection DOWN

Recommended Action No action is required.

Explanation Cluster Transport Connection UP

Recommended Action No action is required.

Explanation Cluster sending JOIN request

Recommended Action No action is required.

Explanation Cluster sending JOIN request

Recommended Action No action is required.

CMOND Messages

This section contains the CMOND messages.

CMOND-2

Explanation Alert message

Recommended Action No action is required.

Explanation Message

Recommended Action No action is required.

CMPPROXY Messages

This section contains the CMPPROXY messages.

CMPPROXY-2

Explanation Connectivity Management processor is not sending heartbeats on this module

Recommended Action No action is required.

Explanation Connectivity Management processor has come up and is exchanging heartbeats with CP on this SUP slot

Recommended Action No action is required.

Explanation Connectivity Management processor has either gone down or is not sending heartbeats for a long time

Recommended Action No action is required.

CMPPROXY-5

Explanation A login attempt has been denied access from Connectivity management processor (CMP) as authentication did not succeed

Recommended Action No action is required.

Explanation Memory allocation in a call to malloc/calloc has failed.

Recommended Action No action is required.

CMPPROXY-6

Explanation A login attempt has succeeded from Connectivity management processor (CMP) in getting access as AAA succeeded

Recommended Action No action is required.

COPP Messages

This section contains the COPP messages.

COPP-1

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

COPP-2

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

Explanation CoPP Initialization failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation Failed to do MTS operation. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation There is no policy to configured to protect the control-plane.'

Recommended Action When such a syslog appears, the user should protect the control plane by giving the appropriate CoPP commands, either of:

conf> copp profile <copp-system-profile-name>

or

conf> control-plane

conf> service-policy input <user-copp-policy-name>

Explanation There is a policy configured to protect the control-plane.

Recommended Action No action is required.

Explanation CoPP Default Profile may have changed; check the difference using show copp diff profile <profile-type> command.

Recommended Action No action is required.

COPP-3

Explanation Failed to alloc required memory. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

Explanation Failed to do PPF operation. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation Failed to do PSS operation. [chars] explains the reason for the failure.

Recommended Action No action is required.

COPP-4

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

COPP-5

Explanation COPP Service Disabled

Recommended Action No action is required.

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

Explanation COPP Service enabled

Recommended Action No action is required.

Explanation COPP Service Initialized

Recommended Action No action is required.

COPP-6

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

Explanation CoPP policy has been attached to control plane interface.

Recommended Action No action is required.

Explanation CoPP policy has been detached from control plane interface.

Recommended Action No action is required.

COPP-7

Explanation There are CoPP drops, [chars] tell which class has dropped packets.

Recommended Action No action is required.

Explanation Kernel coredump finishing on a module

Recommended Action No action is required.

Explanation Kernel coredump starting on a module

Recommended Action No action is required.

CORE-DMON Messages

This section contains the CORE-DMON messages.

CORE-DMON-2

Explanation Explanation Kernel coredump finishing on a module

Recommended Action Recommended Action No action is required.

Explanation Explanation Kernel coredump starting on a module

Recommended Action Recommended Action No action is required.

CORE-DMON-3

Explanation Not enough space to save new core files

Recommended Action No action is required.

CRDCFG Messages

This section contains the CRDCFG messages.

CRDCFG-2

Explanation CardConfig CRITICAL ERROR

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CRDCFG-3

Explanation CardConfig Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardConfig log message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardConfigServer Message

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation CardConfigServer log message

Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CRDCFG-SLOT#-2

Explanation CardConfig Failed to find matching card id, pnum in database

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

CREDITMON Messages

This section contains the CREDITMON messages.

CREDITMON-SLOT#-2

Explanation Credit Monitor application exited

Recommended Action No action is required.

Explanation Credit Monitor error binding to MTS

Recommended Action No action is required.

CTS Messages

This section contains the CTS messages.

CTS-2

Explanation Fibre-Channel Authentication failure on Port [chars].(Reason Code [chars] Detail [chars]). Please check password configurations and ensure appropriate security modes on this port as well as peer port

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation CTS Manager has been unable to initialize with the FC-2 E_Port infrastructure.

Recommended Action No action is required.

Explanation CTS Manager has been unable to initialize with the FC-2 F_Port infrastructure.

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation CTS Manager has been unable to initialize with the IPC infrastructure.

Recommended Action No action is required.

Explanation License of [chars] is unavailable. Service will exit now

Recommended Action Please install the license file to continue using the feature.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

CTS-3

Explanation DOT1X authentication failed on the port

Recommended Action No action is required.

CTS-5

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

CTS-6

Explanation

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Recommended Action No action is required.

Explanation

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

CTS-7

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

Explanation.

Recommended Action No action is required.

DAEMON Messages

Explanation This message provides information about errors related to SSH.

Recommended Action Perform additional debugging to resolve the issue.

Explanation This message provides information about components that use syslog's internal facility, DAEMON, to raise syslogs.

Recommended Action Perform additional debugging to resolve the issue.
If the issue is not resolved, please contact the Cisco reseller through which you procured the product for support; if you have purchased a Cisco support contract please call Cisco TAC for support.

DCEFIB Messages

This section contains the DCEFIB messages.

DCEFIB-SLOT#-0

Explanation L2mp unicast fib failed to initialize CLI infrastructure's backend library. This is a fatal error.

Recommended Action No action is required.

Explanation L2mp unicast fib failed to initialize timer library. This is a fatal error.

Recommended Action No action is required.

DCEFIB-SLOT#-2

Explanation Memory allocation failed. This is a critical failure

Recommended Action No action is required.

Explanation L2mp unicast fib failed to recover after a re-start. This is a fatal error.

Recommended Action No action is required.

Explanation L2mp unicast fib encountered an error:

Recommended Action No action is required.

DCEFIB-SLOT#-6

Explanation L2mp unicast fib has created its internal state stateless/stateful [chars].

Recommended Action No action is required.

Explanation L2mp unicast fib notice:

Recommended Action No action is required.

Explanation Request to create VDC [dec] in l2mp unicast fib was successful.

Recommended Action No action is required.

Explanation L2mp unicast fib has successfully removed VDC [dec] from its databases.

Recommended Action No action is required.

DEBUGPROXY Messages

This section contains the DEBUGPROXY messages.

DEBUGPROXY-6

Explanation General SSM debug proxy information

Recommended Action No action is required.

DEVICE-ALIAS Messages

This section contains the DEVICE-ALIAS messages.

DEVICE-ALIAS-2

Explanation Memory allocation failed for size [dec] type [dec]

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Device-alias default mode is enhanced mode.

Recommended Action None.

Explanation An error occurred during initialization. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

DEVICE-ALIAS-3

Explanation An error occurred while performing a CFS operation. [chars] indicates the CFS operation and the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while clearing the session. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while committing the database. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Commit request received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while acquiring the lock. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Lock request received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while activating the merged database. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Merge activation request received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred during merge operation. [chars] indicates the reason for failure.

Recommended Action Compare device-alias configuration with the other switches in the fabric, resolve the conflicts if any and commit the changes.

Explanation MREQ received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation MRESP received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while validating the merged database. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Merge validation request received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred during MTS operation. [chars] indicates the MTS operation and the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred during PSS operation. [chars] indicates the PSS operation and the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while releasing the lock. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Unlock request received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while validating the database. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Validation request received from remote switch is rejected. [chars] indicates the reason for failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

DEVICE-ALIAS-6

Explanation An error occurred while clearing the session. [chars] indicates the additional information regarding failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while committing the database. [chars] indicates the additional information regarding failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Fcalias [chars] could not be imported due to definition conflict. Either there is already a device-alias configuration present with the same definition OR another VSAN specified in the import VSAN range has an Fcalias with the same definition.

Recommended Action Resolve the conflict and issue the import command again.

Explanation Fcalias [chars] could not be imported due to having unsupported member types. Fcalias can be imported only if it has Port WWN based members.

Recommended Action Make sure that the Fcalias has Port WWN based members and issue the import command again.

Explanation Fcalias [chars] could not be imported due to name conflict. Either there is already a device-alias configuration present with the same name OR another VSAN specified in the import VSAN range has an Fcalias with the same name.

Recommended Action Resolve the conflict and issue the import command again.

Explanation Fcalias [chars] could not be imported due to having unsupported number of members. Fcalias can be imported only if it has exactly one member.

Recommended Action Make sure that the Fcalias has exactly one member and issue the import command again.

Explanation An error occurred while acquiring the lock. [chars] indicates the additional information regarding failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred while activating the merged database. [chars] indicates the additional information regarding failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Merged database could not be validated as some of the applications returned busy. [chars] indicates information about the application returned busy. There is no user intervention necessary. The validation would be automatically retried after some time.

Recommended Action No DDTS.

Explanation Merged database received from the remote switch could not be validated as some of the applications returned busy. [chars] indicates information about the application returned busy. There is no user intervention necessary. The validation would be automatically retried after some time.

Recommended Action No DDTS.

Explanation An error occurred while releasing the lock. [chars] indicates the additional information regarding failure.

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Local validation is aborted. [chars] indicates the reason why validation is aborted.

Recommended Action No DDTS.

DEVICE_TEST Messages

This section contains the DEVICE_TEST messages.

DEVICE_TEST-2

Explanation Online diagnostics ASIC Register Check test has failed

Recommended Action No action is required.

Explanation Online diagnostics Compact Flash test has failed

Recommended Action No action is required.

Explanation Online diagnostics Crypto Device test has failed

Recommended Action No action is required.

Explanation Online diagnostics device test detected failure but no action taken

Recommended Action No action is required.

Explanation Online diagnostics device test detected module failure

Recommended Action No action is required.

Explanation Online diagnostics EOBC test has failed

Recommended Action No action is required.

Explanation Online diagnostics System Mgmt Bus test has failed

Recommended Action No action is required.

Explanation Device Test process could not allocate memory

Recommended Action No action is required.

Explanation Online diagnostics Management Port test is skipped

Recommended Action No action is required.

Explanation Online diagnostics NVRAM test has failed

Recommended Action No action is required.

Explanation Online diagnostics OBFL test has failed

Recommended Action No action is required.

Explanation Online diagnostics System Mgmt Bus test has failed

Recommended Action No action is required.

Explanation Online diagnostics Primary BootROM test has failed

Recommended Action No action is required.

Explanation Online diagnostics Power Mgmt Bus test has failed

Recommended Action No action is required.

Explanation Online diagnostics RealTimeClock test has failed

Recommended Action No action is required.

Explanation Online diagnostics Secondary BootROM test has failed

Recommended Action No action is required.

Explanation Online diagnostics Spine Control Bus test has failed

Recommended Action No action is required.

Explanation Online diagnostics Standby Fabric Loopback test has failed

Recommended Action No action is required.

Explanation Online diagnostics Status bus test has failed

Recommended Action No action is required.

Explanation Online diagnostics USB test has failed

Recommended Action No action is required.

DEVICE_TEST-3

Explanation Device Test Standby Loopback Test failed get vqi

Recommended Action No action is required.

Explanation Device Test Standby Fabric Loopback Test get spine failed

Recommended Action No action is required.

Explanation Device Test Standby Fabric Loopback Test failed in its process

Recommended Action No action is required.

Explanation Device Test Standby Fabric Loopback Test failed mts in it

Recommended Action No action is required.

Explanation Device Test Standby Fabric Loopback Test Socket error

Recommended Action No action is required.

DEVICE_TEST-4

Explanation Device Test process could not create threads

Recommended Action No action is required.

Explanation Device Test process could not create timer

Recommended Action No action is required.

Explanation Device Test process could not start timer

Recommended Action No action is required.

DEVICE_TEST-5

Explanation Device Test process could not allocate memory

Recommended Action No action is required.

DEVICE_TEST-6

Explanation Device Test process could not allocate memory

Recommended Action No action is required.

DEV_LOG_SUP Messages

This section contains the DEV_LOG_SUP messages.

DEV_LOG_SUP-3

Explanation Dev_log_sup encountered an error

Recommended Action No action is required.

DEV_LOG Messages

This section contains the DEV_LOG messages.

DEV_LOG-3

Explanation Dev_log_lc encountered an error

Recommended Action No action is required.

DEV_LOG-SLOT#-4

Explanation Dev_log_lc encountered an error

Recommended Action No action is required.

DFTM Messages

This section contains the DFTM messages.

DFTM-SLOT#-2

Explanation DFTM database doesn’t have the interface.

Recommended Action No action is required.

Explanation DFTM recvd invalid number of F Tags from M2RIB.

Recommended Action No action is required.

Explanation DFTM has invalid number of interfaces in the DB.

Recommended Action No action is required.

Explanation DFTM recvd invalid number of PC members from ELTM.

Recommended Action No action is required.

Explanation DFTM database does not have the VLAN.

Recommended Action No action is required.

DFTM-SLOT#-3

Explanation DFTM failed to program BDDB Entry

Recommended Action No action is required.

Explanation DFTM failed to program BD Table Entry

Recommended Action No action is required.

Explanation Invalid Port Layer Received for interface

Recommended Action No action is required.

Explanation Invalid Port Mode Received for interface

Recommended Action No action is required.

Explanation Invalid Port Type Received for interface

Recommended Action No action is required.

Explanation Failed to get type for the interface

Recommended Action No action is required.

Explanation DFTM recvd prim-sec vlan mapping request for a non-existing sec vlan on prim vlan

Recommended Action No action is required.

Explanation DFTM failed to program L2L3 Consistency Table Entry

Recommended Action No action is required.

Explanation DFTM failed to program Multicast Ftag Table Entry

Recommended Action No action is required.

Explanation DFTM failed to program SGT DGT Table Entry

Recommended Action No action is required.

Explanation DFTM failed to program VLAN Translation Table

Recommended Action No action is required.

DHCP_SNOOP Messages

This section contains the DHCP_SNOOP messages.

DHCP_SNOOP-2

Explanation DHCP snoop process did an abnormal exit

Recommended Action No action is required.

Explanation Hardware programming has failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation DHCP Daemon Initialization failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation DHCP Daemon encountered a PSS error. [chars] specifies the context where the failure occurred.

Recommended Action No action is required.

Explanation Could not register par tree. [chars] explains the reason for the failure.

Recommended Action No action is required.

DHCP_SNOOP-3

Explanation DHCP Daemon is out of dynamic memory. [chars] specifies the context where the failure occurred.

Recommended Action No action is required.

Explanation DHCP Snoop process has hit an assert condition at file [chars] line number [dec]

Recommended Action No action is required.

Explanation [chars] identifies interface and [dec] identifies the vlan on which ARP packets have been denied. [chars] identifies sender mac and [chars] identifies the sender ip. [chars] identifies the target mac and [chars] identifies the target ip.

Recommended Action No action is required.

Explanation [chars] identifies the interface which has been error disabled due to excessive ingress rate [dec].

Recommended Action No action is required.

Explanation Hardware programming has failed. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation Validation errors DHCP packet received on the interface [chars] vlan [dec]. Reason:[chars]

Recommended Action No action is required.

Explanation DHCP Daemon encountered an MTS error. [chars] specifies the context where the error occurred.

Recommended Action No action is required.

Explanation Dropping the packet. [char] identifies the reason.

Recommended Action No action is required.

Explanation Failed to receive packet. [char] identifies the reason.

Recommended Action No action is required.

Explanation Failed to send packet. [char] identifies the reason.

Recommended Action No action is required.

Explanation Failed to bind to socket. [char] identifies the reason.

Recommended Action No action is required.

Explanation An attempt to open a socket for receiving DHCP packets failed. [char] identifies the reason.

Recommended Action No action is required.

DHCP_SNOOP-4

Explanation Packet-count [dec] Invalid ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]])

Recommended Action No action is required.

Explanation Packet-count [dec] Invalid ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]])

Recommended Action No action is required.

Explanation Interface [chars] has moved to error disabled state due to excessive rate [dec] of ingress ARP packets

Recommended Action No action is required.

Explanation Packet-count [dec] Invalid ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]])

Recommended Action No action is required.

Explanation There are more than SMARTRELAYMAXIPADDR addresses configured on the interface. [dec] is the number of IP addresses with which smart relay supported [chars] identifies the interface. This is an informational message.

Recommended Action No action is required.

Explanation Smart relay MAX limit reached. [dec] is the number of smart relay bindings This is an informational message.

Recommended Action No action is required.

Explanation There are more than SUBNETBCASTRELAYMAXIPADDR addresses configured on the interface. [dec] is the number of IP addresses with which subnet-broadcast relay supported [chars] identifies the interface. This is an informational message.

Recommended Action No action is required.

DHCP_SNOOP-5

Explanation Packet-count [dec] ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]])

Recommended Action No action is required.

Explanation A Host identified by [chars] has been added. [chars] identifies the interface. [dec] identifies the VLAN. [chars] identifies IP address. [dec] identifies the lease time in secs. This is an informational message.

Recommended Action No action is required.

Explanation The lease for host identified by [chars] with IP address [chars] connected to interface [chars] in VLAN [dec] with lease [dec] has expired.

Recommended Action No action is required.

Explanation Packet-count [dec] ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]])

Recommended Action No action is required.

Explanation DHCP Snooping was disabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan. This is an informational message.

Recommended Action No action is required.

Explanation DHCP Snooping was enabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan. This is an informational message.

Recommended Action No action is required.

DHCP_SNOOP-6

Explanation Dynamic ARP Inspection was disabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan. This is an informational message.

Recommended Action No action is required.

Explanation Dynamic ARP Inspection was enabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan. This is an informational message.

Recommended Action No action is required.

Explanation Binding entry identified by [chars] has been synced. [chars] identifies the interface. [dec] identifies the VLAN. [chars] identifies IP address. [dec] identifies the lease time in secs. This is an informational message.

Recommended Action No action is required.

Explanation DHCP Daemon is shutting down gracefully. This is an informational message.

Recommended Action No action is required.

Explanation [chars] identifies interface and [dec] identifies the vlan on which ARP packets have been permitted. [chars] identifies sender mac and [chars] identifies the sender ip. [chars] identifies the target mac and [chars] identifies the target ip.

Recommended Action No action is required.

Explanation Gracefully forwarding DHCP packet. reason [chars]

Recommended Action No action is required.

Explanation DHCP Daemon was created successfully and is up and running. This is an informational message.

Recommended Action No action is required.

Explanation An event during switchover. [chars] explains the reason for the failure.

Recommended Action No action is required.

Explanation IP Src Guard was disabled on a given intf. [chars] is the intf-ID string that identifies the intf. This is an informational message.

Recommended Action No action is required.

Explanation IP Src Guard was enabled on a given intf. [chars] is the intf-ID string that identifies the intf. This is an informational message.

Recommended Action No action is required.

Explanation Non DHCP packet arrived with UDP src/dst ports [dec], [dec] on interface [chars], vlan [dec]. Forwarding the packet on [chars]

Recommended Action No action is required.

Explanation Insertion of Option82 sub options failed. [chars] tells the failure. [chars] explains the reason for failure. This is an informational message.

Recommended Action No action is required.

DIAGCLIENT Messages

This section contains the DIAGCLIENT messages.

DIAGCLIENT-2

Explanation Bootup Test completed

Recommended Action Nothing to be done if the test reports SUCCESS otherwise copy the Message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information

Explanation Informational Syslog

Recommended Action No action is required.

Explanation Read operation from PSS store failed

Recommended Action No action is required.

Explanation Write operation on PSS store failed

Recommended Action No action is required.

DIAGCLIENT-3

Explanation Ondemand test has failed more than configured number of times

Recommended Action Copy the Message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information

DIAGCLIENT-4

Explanation Informational Syslog

Recommended Action No action is required.

Explanation MTS send reports failure

Recommended Action No action is required.

DIAGCLIENT-5

Explanation DiagClient process could not allocate memory

Recommended Action No action is required.

Explanation Informational Syslog

Recommended Action No action is required.

Explanation Informational Syslog

Recommended Action No action is required.

Explanation Informational Syslog

Recommended Action No action is required.

Explanation A scheduled Test was completed

Recommended Action No action is required.

Explanation The specified test has reported FAILURE in this Iteration

Recommended Action No action is required.

Explanation The specified test has reported SUCCESS in this Iteration

Recommended Action No action is required.

DIAGCLIENT-7

Explanation A Health Monitoring Test has reported failure

Recommended Action Ensure the line card is firmly in the slot, re-seat if necessary, and attempt to run the test again if the line card is not seated properly in the slot. If the line card was properly seated in the slot, copy the Message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information.

Explanation Per Port Test has failed on the above all ports

Recommended Action No action is required.

DIAGMGR Messages

This section contains the DIAGMGR messages.

DIAGMGR-2

Explanation MTS send reports failure

Recommended Action No action is required.

Explanation Read operation from PSS store failed

Recommended Action No action is required.

Explanation Write operation on PSS store failed

Recommended Action No action is required.

DIAGMGR-3

Explanation A major error was detected during diagnostic testing

Recommended Action Re-seat the card and retry the test. If the same result occurs after re-seating the card and retrying the test, copy the Message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.

Explanation A minor error was detected during diagnostic testing

Recommended Action Re-seat the card and retry the test. If the same result occurs after re-seating the card and retrying the test, copy the Message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information

Explanation The process initialization failed to get the current slot.

Recommended Action This is an informational message stating that a process initialization failure.

DIAGMGR-4

Explanation The process received an offline event for the slot it is running. Ignoring it.

Recommended Action This is an informational message stating that an unexpected event has been encountered.

Explanation Starting a Disruptive Test can disturb the systems normal functionality'

Recommended Action Reset target module

Explanation The specified health monitoring test interval is not user-configurable and therefore cannot be changed

Recommended Action Nothing. The specific health monitoring interval is not user- configurable by design so nothing can be done to change the interval

DIAGMGR-5

Explanation Current Diagnostic BootUp Level being configure or changed

Recommended Action No action is required.

Explanation Memory allocation in a call to malloc/calloc has failed

Recommended Action No action is required.

Explanation The specified health monitoring test must be run and cannot be disabled

Recommended Action Nothing. The specific health monitoring test cannot be disabled by design. The system is working properly.

Explanation Health Monitoring Test started

Recommended Action No action is required.

Explanation Health Monitoring Test has been stopped It can be enabled through the diagnostic monitor command

Recommended Action No action is required.

Explanation Health Monitoring cannot be enabled for the specified test because the interval for the test has been incorrectly set

Recommended Action The system is working properly and no user action is required. If you want to specify a smaller testing interval, the Message text provides the lowest possible configurable interval for the specified monitoring interval

Explanation A line card could not be located in a slot where a diagnostic action was requested

Recommended Action Ensure the targeted line card is properly seated in the specified slot. If the line card is properly seated, ensure the correct slot was indicated in the command-line interface. If the line card is well-seated and the correct slot was specified, copy the Message exactly as it appears on the screen as well as the output of show tech-support and paste the output into a separate file. Contact your technical support representative with the gathered information

Explanation Non-HM test cannot be scheduled to run as a Health Monitoring test

Recommended Action No action is required.

DIAGMGR-6

Explanation The diagnostic tests did not detect any error on the card.

Recommended Action This is an informational message stating that the line card passed the diagnostic tests.

Explanation Starting bootup testing for above module

Recommended Action No action is required.

DIAG_PORT_LB Messages

This section contains the DIAG_PORT_LB messages.

DIAG_PORT_LB-2

Explanation GOLD test detected faulty fabric

Recommended Action Fabric failure, no corrective action needed (message for reload/power-down of faulty fabric), contact TAC for further action.

Explanation GOLD test failed due to faulty ports.

Recommended Action Port failure, unable to identify the faulty device. No corrective action possible, contact TAC for further action.

Explanation GOLD test failed due to faulty ports.

Recommended Action Port failure, no corrective action needed as affected ports are error disabled. Contact TAC for further action.

Explanation GOLD test failed due to faulty supervisor. Recovery not possible.

Recommended Action Active sup failure, no corrective action needed (switchover to redundant sup failed), contact TAC for further action.

Explanation GOLD test failed due to faulty supervisor. Doing Switchover to recover.

Recommended Action Active sup failure, no corrective action needed (message for switchover to redundant sup), contact TAC for further action.

Explanation Random Number generation failed in FIPS module

Recommended Action No corrective action needed (message for FIPS mode failure), contact TAC for further action.

Explanation Internal Port Loopback test failed on the module consecutively.

Recommended Action Contact TAC. Immediate corrective action depends on failure reason/error:

– For sup tx/rx issues--Perform sup switchover if possible.

– For fabric issues--Power down faulty fabric card

– For port failure--If normal traffic is impacted, shut down affected ports mapped to failed ASIC.

Explanation Failed to send the response for LC insertion to Module Manager.

Recommended Action No user action is needed, contact TAC.

Explanation Port Loopback test process failed to get Diagnostic LIF ID.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process could not allocate memory.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test failed on the module consecutively

Recommended Action Contact TAC. Immediate corrective action depends on failure reason/error:

– For sup tx/rx issues--Perform sup switchover if possible.

– For fabric issues--Power down faulty fabric card

– For port failure--If normal traffic is impacted, shut down affected ports mapped to failed ASIC.

Explanation Port Loopback test process failed in process initialization

Recommended Action No user action is needed, contact TAC.

Explanation Rewrite Engine Port Loopback test failed on the module consecutively

Recommended Action Contact TAC. Immediate corrective action depends on failure reason/error:

– For sup tx/rx issues--Perform sup switchover if possible.

– For fabric issues--Power down faulty fabric card

– For port failure--If normal traffic is impacted, shut down affected ports mapped to failed ASIC.

DIAG_PORT_LB-3

Explanation Forwarding path setup for port loopback tests failed

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to send loopback packets.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed in MTS API.

Recommended Action No user action needed, contact TAC.

Explanation Failed to get the BD corresponding to the Diag VLAN

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed in if_index library API

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to send loopback packets.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to get the current test run information

Recommended Action No user action needed, contact TAC.

Explanation The port loopback test was not able to get chassis info

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to convert port if index

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed in Port Client API.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to add the port test result

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to send the test results

Recommended Action No user action needed, contact TAC.

Explanation Rewrite Engine Loopback test failed on the spine path consecutively

Recommended Action Power-down affected fabric cards, contact TAC.

Explanation Port Loopback test process failed in socket operations

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed in stats infra lib API.

Recommended Action No user action needed, contact TAC.

Explanation The Port Loopback test was not able to send the test results.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process timer handling failure.

Recommended Action No user action needed, contact TAC.

Explanation Port Loopback test process failed to get Diagnostic VLAN info

Recommended Action No user action needed, contact TAC.

Explanation Rewrite Engine Loopback test failed in socket operations.

Recommended Action No user action needed, contact TAC.

Explanation Rewrite Engine Loopback test failed to set the XBAR mask while running the test. The target module could have gone offline.

Recommended Action No user action needed, contact TAC.

DIAG_PORT_LB-4

Explanation Port Loopback test process failed in MTS API.

Recommended Action No action is required (message for MTS error).

Explanation Failed to configure/restore the port to do/cleanup port loopback testing

Recommended Action No action is required.

DIAG_PORT_LB-5

Explanation DIAG_PORT_LB Service Disabled

Recommended Action No action is required (config change notification message).

Explanation DIAG_PORT_LB Service enabled

Recommended Action No action is required (config change notification message).

DMM Messages

This section contains the DMM messages.

DMM-SLOT#-2

Explanation Temp main log

Recommended Action No action is required.

DMM-SLOT#-5

Explanation A New N-Port has come up which is zoned in the same zone as the Server

Recommended Action No action is required.

Explanation A New N-Port has come up which is zoned in the same zone as the Storage

Recommended Action No action is required.

Explanation An RSCN event was received for the Server associated with a Job

Recommended Action No action is required.

Explanation An RSCN event was received for the Storage associated with a Job

Recommended Action No action is required.

Explanation Event indicating the completion of a Data Migration Job

Recommended Action No action is required.

Explanation Event indicating the Suspension of Data Migration Job due to loss in ip connectivity to peer SSM

Recommended Action No action is required.

Explanation Event indicating the Suspension of Data Migration Job

Recommended Action No action is required.

Explanation Event indicating Finish-request for a Method-2 Data Migration Job

Recommended Action No action is required.

Explanation Event indicating the start of a Data Migration Job

Recommended Action No action is required.

Explanation Event indicating that the Data Migration Job was stopped by Administrator

Recommended Action No action is required.

Explanation Event indicating IP Connectivity loss to peer SSM. Affected Job maybe be RESET

Recommended Action No action is required.

Explanation Event indicating the completion of a Data Migration Job Verification

Recommended Action No action is required.

Explanation Event indicating the Suspension of Data Migration Job Verification due to an error

Recommended Action No action is required.

Explanation Event indicating the start of a Data Migration Job Verification

Recommended Action No action is required.

Explanation Event indicating the Suspension of Data Migration Job Verification by the user

Recommended Action No action is required.

DOT1X Messages

This section contains the DOT1X messages.

DOT1X-2

Explanation The system failed to create the Dot1x process

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

DOT1X-3

Explanation Dot1x is not supported on an interface which is configured with static mac entries

Recommended Action Remove the static mac entry on the interface

Explanation Dot1x and SPAN destination ports are mutually exclusive features.

Recommended Action Disable SPAN destination port configuration first before reconfiguring Dot1x on the port.

Explanation The Dot1x interface parameter is out of the specified range or is invalid.

Recommended Action Refer to the CLI help documentation to determine the valid 802.1x parameters.

Explanation Insufficient system memory is available to perform the Dot1x Authentication.

Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Explanation Dot1x Authentication can only be enabled on physical Ethernet interfaces.

Recommended Action Enable Dot1x Authentication on physical Ethernet interfaces only.

Explanation The interface specified in the Message could not secured supplicant mac. The port has been Error disabled.

Recommended Action Mac address could not be added into mac address table. Enter the <Cmd

Explanation The port on the interface specified in the Message is configured in single host mode. Any new host that is detected on the interface is treated as a security violation. The port has been Error disabled.

Recommended Action Ensure that the port is configured to use only one host. Enter the <Cmd

Explanation An attempt was made to initialize an invalid state machine.

Recommended Action Initialize dot1x state machine

DOT1X-4

Explanation An attempt was made to post an event to a state machine that is invalid for the current state.

Recommended Action Initialize dot1x state machine

Explanation MAB is not supported on portchannel member port

Recommended Action To enable MAB make sure that port is not member of portchannel

Explanation MAB is not supported on Trunk port

Recommended Action To enable MAB make sure that port is not in trunk mode

Explanation Current Port is a member of portchannel, so dot1x host mode has to be in multi-host mode.

Recommended Action To change host mode, ensure that port is not a member of portchannel

Explanation Dot1x is not supported on member ports or port channel with port security configuration

Recommended Action Remove port security configuration on the member port or port channel interface

Explanation An attempted was made to post an event to a state machine that has already been stopped.

Recommended Action An internal error has occurred with the state machine. The traceback should indicate the guilty party.

Explanation Current Port is in trunk mode, so dot1x host mode has to be in multi-host mode.

Recommended Action To change host mode, ensure that port is not in trunk mode

DOT1X-5

Explanation Dot1x Service Disabled

Recommended Action No action is required.

Explanation Dot1x Service Enabled

Recommended Action No action is required.

Explanation Dot1x Notification

Recommended Action No action is required.

Explanation Authentication using 802.1x is not allowed for zero, broadcast, and multicast source MAC addresses.

Recommended Action Connect a Dot1x supported Host to the Dot1x enabled port.

Explanation PAC provisioning status

Recommended Action No action is required.

Explanation Dot1x authentication session has been created after successful authentication of supplicant

Recommended Action No action is required.

Explanation Dot1x authentication session has been terminated

Recommended Action No action is required.

Explanation Dot1x authenticator has changed its internal state

Recommended Action No action is required.

DOT1X-6

Explanation Dot1x Authentication can only be enabled on physical Ethernet interfaces.

Recommended Action Enable Dot1x Authentication on physical Ethernet interfaces only.

DPP_DEBUG Messages

This section contains the DPP_DEBUG messages.

DPP_DEBUG-2

Explanation A DPP generated a critical message

Recommended Action No action is required.

DPVM Messages

This section contains the DPVM messages.

DPVM-2

Explanation Memory allocation failed for size [dec] for [chars]

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation Rejected duplicate pwwn query

Recommended Action DPVM overwrite-duplicate-pwwn

DPVM-3

Explanation An error occurred during an DPVM database operation. [chars] indicates the reason for the error

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation DDAS mode Invalid. [chars]

Recommended Action Flip DDAS mode

Explanation An error happened during DPVM Initialization. [chars] indicates the reason for failure

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred in processing of an MTS message. [chars] indicates the error that occurred

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

Explanation An error occurred during an DPVM PSS operation. [chars] indicates the PSS operation that caused the error

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

DPVM-4

Explanation Activation of DPVM device mappings failed due to [chars]

Recommended Action Correct the error and reactivate database again

Explanation DPVM is unavailable and disabled now

Recommended Action No action is required.

DPVM-6

Explanation DPVM is available and enabled now

Recommended Action No action is required.

Explanation An event happened that affects DPVM. [chars] indicates the event

Recommended Action No action is required.

DSTATS Messages

This section contains the DSTATS messages.

DSTATS-2

Explanation DSTATS process pss initialization failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See pss system error codes for reason.

DSTATS-3

Explanation DSTATS process pss create runtime database failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See pss system error codes for reason.

Explanation DSTATS process pss delete runtime entry key [hex] failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See pss system error codes for reason.

Explanation DSTATS process pss set runtime max key failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See Pss System Error Codes For Reason.

Explanation DSTATS process pss set runtime max value failure due to error [hex].

Recommended Action Collect more information using command showflash'. See Pss System Error Codes For Reason.'

Explanation DSTATS process pss open runtime database failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See Pss System Error Codes For Reason.

Explanation DSTATS process pss reload runtime database failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See Pss System Error Codes For Reason.

Explanation DSTATS process pss snapshot of runtime debug to uri [string] failed due to error [hex].

Recommended Action Collect more information using command 'showflash'. See Pss System Error Codes For Reason.

Explanation DSTATS process pss snapshot of runtime to uri [string] failed due to error [hex].

Recommended Action Collect more information using command 'showflash'. See Pss System Error Codes For Reason.

Explanation DSTATS process pss store runtime entry key [hex] value [hex] failure due to error [hex].

Recommended Action Collect more information using command 'showflash'. See Pss System Error Codes For Reason.'

DT_HELPER Messages

This section contains the DT_HELPER messages.

DT_HELPER-2

Explanation GOLD Test Helper process could not allocate memory

Recommended Action No action is required.

ELTMC Messages

This section contains the ELTMC messages.

ELTMC-2

Explanation ELTM hit a internal error. Collect show tech-support eltm for further analysis.

Recommended Action No action is required.

Explanation Logging some generic debugging info

Recommended Action No action is required.

Explanation ELTM hit a internal error. Collect show tech-support elm for further analysis.

Recommended Action No action is required.

Explanation ELTM hit a internal error. Collect show tech-support elm for further analysis.

Recommended Action No action is required.

Explanation ELTM database doesn't have the interface.

Recommended Action No action is required.

Explanation ELTM doesn't support the interface for the specified operation

Recommended Action No action is required.

Explanation ELTM Failed to get LTL for interface. Packets received on this interface might not be handled correctly by the forwarding engine

Recommended Action No action is required.

Explanation ELTM Failed to get Slot for interface. Port-channels and L2 Learning might be effected

Recommended Action No action is required.

Explanation ELTM Failed to allocate L2 LIF entries in forwarding engine. This will effect Layer 2 and Layer 3 forwarding for the interface

Recommended Action No action is required.

Explanation ELTM Failed to allocate L2 LIF entries in forwarding engine. This will effect Layer 2 and Layer 3 forwarding in this VDC

Recommended Action No action is required.

Explanation ELTM Failed to allocate L2 LIF entries in forwarding engine. This will effect Layer 2 and Layer 3 forwarding for the interface. ISSU failed for certain interfaces

Recommended Action No action is required.

Explanation ELTM Failed to allocate L3 Ingress LIF entries in forwarding engine. This will effect Layer 3 forwarding for the interface

Recommended Action No action is required.

Explanation ELTM Failed to allocate L2 LIF entries in forwarding engine. ISSU failed for this VDC. Shutdown the interfaces

Recommended Action No action is required.

Explanation LTL wasn’t cleaned up either because ETHPM not sending DELETE or PIXM issuing a duplicate LTL

Recommended Action No action is required.

Explanation ELTM Failed to allocate L2 LIF entries in forwarding engine. ISSU failed for this VDC. Shutdown the interfaces

Recommended Action No action is required.

Explanation ELTM Failed to apply vlan translation table on an interface add

Recommended Action No action is required.

Explanation ELTM Failed to apply vlan translation table on an interface del

Recommended Action No action is required.

Explanation ELTM Failed to get the reserved vlans. This will effect multicast forwarding on SVI interfaces.

Recommended Action No action is required.

Explanation ELTM Failed to allocate L2 LIF entries in forwarding engine. ISSU failed for this VDC. Remove the interfaces and then reload VDC

Recommended Action No action is required.

Explanation ELTM hit a internal error. Collect show tech-support eltm for further analysis.

Recommended Action No action is required.

ELTM Messages

This section contains the ELTM messages.

ELTM-2

Explanation ELTM hit a internal error. Collect show tech-support eltm for further analysis.

Recommended Action No action is required.

Explanation ELTM hit a internal error. Collect show tech-support eltm for further analysis.

Recommended Action No action is required.

Explanation ELTM database doesn’t have the interface'

Recommended Action No action is required.

Explanation ELTM does not support the interface for the specified operation

Recommended Action No action is required.

Explanation ELTM Failed to get LTL for interface. Packets received on this interface might not be handled correctly by the forwarding engine

Recommended Action No action is required.

ELTM-3

Explanation Error in ELTM while handling feature OTV request from OIM

Recommended Action No action is required.

ELTM-5

Explanation Recently applied Multicast config on the interface was unsuccessful, so reverting to the old state (before config)

Recommended Action No action is required.

ELTM-6

Explanation No action is required.

Recommended Action Eltm

EOU Messages

This section contains the EOU messages.

EOU-2

Explanation Failure of host addition/deletion to/from pbacl group

Recommended Action Please verify the addition/deletion of the host using the cli show object-group. If it was a delete request that failed, manual deletion of the host from the group is recommended

EOU-5

Explanation Service EOU Disabled

Recommended Action No action is required.

Explanation Service EOU enabled

Recommended Action No action is required.

EOU-6

Explanation Policy retained

Recommended Action No action is required.

Explanation Authentication type

Recommended Action No action is required.

Explanation Bad Packet because of reason specified

Recommended Action No action is required.

Explanation CTA detected or not

Recommended Action No action is required.

Explanation Identity Matched or not

Recommended Action No action is required.

Explanation Status of host addition/deletion to pbacl group

Recommended Action No action is required.

Explanation Policy applied

Recommended Action No action is required.

Explanation Posture of host

Recommended Action No action is required.

Explanation Session detected

Recommended Action No action is required.

Explanation Eou using above port

Recommended Action No action is required.

Explanation Status query state

Recommended Action No action is required.

Explanation Error due to unknown event

Recommended Action No action is required.

Explanation EOU version mismatch

Recommended Action No action is required.

EOU-7

Explanation EOU service disabled on interface

Recommended Action No action is required.

Explanation EOU service enabled on interface

Recommended Action No action is required.

EPLD_AUTO Messages

This section contains the EPLD_AUTO messages.

EPLD_AUTO-2

Explanation Automatic upgrade pre- upgrade notice.

Recommended Action No action is required.

Explanation Automatic upgrade of module completed.

Recommended Action No action is required.

Explanation Automatic upgrade of module started.

Recommended Action No action is required.

Explanation Automatic upgrade status notice.

Recommended Action No action is required.

EPLD_UPGRADE Messages

This section contains the EPLD_UPGRADE messages.

EPLD_UPGRADE-2

Explanation Install all EPLD does not upgrade Active Supervisor in a switch with a single supervisor.

Recommended Action No action is required.

Explanation Install all EPLD did not upgrade Active Supervisor.

Recommended Action No action is required.

EPP Messages

This section contains the EPP messages.

EPP-5

Explanation Trunk protocol failed

Recommended Action show epp internal event-history err' will indicate the errors encountered

Explanation The interface is looped back to another interface on the same switch

Recommended Action Check the connectivity of this interface and ensure that it is connected to another switch

Explanation Epp trunk protocol enabled/disabled on the switch

Recommended Action No action is required.

ETH-PORT-SEC Messages

This section contains the ETH-PORT-SEC messages.

ETH-PORT-SEC-3

Explanation Failed to configure MACs

Recommended Action No action is required.

Explanation Invalid VLAN configuration

Recommended Action No action is required.

Explanation Moved the port to violation state due to a mac address seen on one port being seen on another

Recommended Action No action is required.

Explanation Moved the port to violation state due to exceeding address count

Recommended Action No action is required.

Explanation Unable to disable eth_port_sec Service

Recommended Action No action is required.

Explanation Unable to enable eth_port_sec Service

Recommended Action No action is required.

Explanation Failed to update violation mode

Recommended Action No action is required.

ETH-PORT-SEC-5

Explanation Age time expired for host

Recommended Action No action is required.

Explanation Eth_port_sec Service Disabled

Recommended Action No action is required.

Explanation Dynamic MAC address for port cleared

Recommended Action No action is required.

Explanation Eth_port_sec Service Enabled

Recommended Action No action is required.

Explanation A new host is learnt on a port

Recommended Action No action is required.

Explanation A host has been removed

Recommended Action No action is required.

ETHPORT Messages

This section contains the ETHPORT messages.

ETHPORT-2

Explanation There was a critical failure in the component.

Recommended Action Please follow instructions on the syslog.

Explanation The interface encountered an error while configuring it

Recommended Action Collect more information about failed interface using command show port internal all interface [char]. In most cases, you can recover using a shutdown followed by a noshutdown on the interface or removing and re-inserting the fiber optic-cable.

Explanation Some component returned system error as a response to one of the port event sequence.

Recommended Action None

Explanation Some component did not respond to a request in stipulated time.

Recommended Action None

Explanation There was a critical failure in the component.

Recommended Action Please collect system tech-support

ETHPORT-3

Explanation This interface belongs to a PortChannel and the PortChannel is error disabled

Recommended Action Perform shut and noshutdown on the PortChannel interface that it belongs to

Explanation The VLANs on an interface are being removed from the suspended state

Recommended Action No action is required.

Explanation The VLANs on an interface are being suspended due to some protocol action

Recommended Action No action is required.

Explanation There was an alarm on the transceiver module

Recommended Action Please do show interface transceiver details to obtain more information

Explanation There was an error on the transceiver module

Recommended Action Please do show interface transceiver details to obtain more information

Explanation The transceiver for the interface specified in the Message is not a Cisco supported module

Recommended Action Replace the module with a compatible transceiver. If the transceiver was purchased from Cisco, please contact Cisco TAC to get the transceiver replaced

Explanation There was an alarm on the transceiver module

Recommended Action Please do show interface transceiver details to obtain more information

Explanation There was an error on the transceiver module

Recommended Action Please do show interface transceiver details to obtain more information

ETHPORT-4

Explanation Port needs to be port-channel member for current configuration

Recommended Action No action is required.

Explanation The transceiver for the interface specified has not been qualified on this platform for this software release

Recommended Action Replace the module with a supported transceiver. Contact Cisco TAC to get platform transceiver qualification details

Explanation There was an warning on the transceiver module

Recommended Action Please do show interface transceiver details to obtain more information

Explanation There was an warning on the transceiver module

Recommended Action Please do show interface transceiver details to obtain more information

ETHPORT-5

Explanation Interface is admin up

Recommended Action No action is required.

Explanation Bandwidth of the interface (port channel) has changed and this change is updated

Recommended Action No action is required.

Explanation Interface has been configured to be administratively down

Recommended Action Perform noshutdown''

Explanation FCIP interface temporarily down due to reconfiguration

Recommended Action No action is required.

Explanation This interface belongs to a PortChannel and the PortChannel is configured to be administratively down

Recommended Action Perform noshutdown on the PortChannel interface that it belongs to

Explanation The interface belongs to a PortChannel and a configuration is being attempted on the interface while there is a configuration in progress on the PortChannel

Recommended Action Retry the configuration again

Explanation Isolated due to a failure while assigning a domain

Recommended Action No action is required.

Explanation Invalid RCF received

Recommended Action No action is required.

Explanation Isolated due to domain manager being disabled

Recommended Action No action is required.

Explanation Remote end domain manager not responding

Recommended Action No action is required.

Explanation Isolating this interface due to the remote end being isolated

Recommended Action No action is required.

Explanation Isolated due to domain overlap

Recommended Action No action is required.

Explanation ELP failed on the interface

Recommended Action Check the output of 'show port internal info' in the 'ELP failure reason' field

Explanation Trunk protocol failed

Recommended Action ‘show port internal event-history msgs’ will indicate the trunk protocol exchanges to determine why it failed

Explanation ESC failed on the interface

Recommended Action Check the output of 'show port internal event - history' to determine the ESC protocol exchanges to determine how it failed

Explanation Ethernet link to which the FCIP interface is bound is down

Recommended Action Ensure that the ethernet cable is connected, the interface is administratively enabled

Explanation Ethernet link to which the FCIP interface is bound is down

Recommended Action Ensure that the ethernet cable is connected and the remote end is also active

Explanation The FCOT has been removed

Recommended Action Insert an FCOT

Explanation Fcot inserted is not a supported one

Recommended Action Please contact customer support for a list of authorized transceiver vendors

Explanation The modules hardware has failed

Recommended Action Collect more information about failed module using command 'show module internal all module'

Explanation The port VLAN or VSAN has been suspended or deleted

Recommended Action Assign a new active port VLAN/VSAN to the interface

Explanation The configured mode is not supported on this interface

Recommended Action Perform a 'show port internal info' to determine the list of modes supported on this interface

Explanation The configured receive B2B credit size is not supported

Recommended Action Get the allowed receive B2B credit size from 'show port internal info'

Explanation The configured receive buffer size is not supported

Recommended Action Get the allowed receive buffer size from 'show port internal info'

Explanation The configured speed is not supported on this interface

Recommended Action Perform a 'show port internal info' to determine the range of speed supported on this interface

Explanation The interface is in the process of coming up

Recommended Action If the interface is stuck in this state for a while, check the output of 'show port internal event-history' to determine what it is waiting for.

Explanation Interface removed

Recommended Action No action is required.

Explanation The physical link has gone down

Recommended Action Ensure that the cable is connected and the remote end is not shut down

Explanation Diag failed on the interface

Recommended Action Collect more information about failed interface using command 'attach module' to connect to module

Explanation The interface is looped back to another interface on the same switch

Recommended Action Check the connectivity of this interface and ensure that it is connected to another switch

Explanation Interface is down because the module was removed

Recommended Action No action is required.

Explanation Interface is down with a possible reason.

Recommended Action Collect more information about port using command 'show port internal info/event-history' to determine why it went down

Explanation The loop port has been put into non participating mode

Recommended Action No action is required.

Explanation The interface has been placed into the offline state

Recommended Action No action is required.

Explanation Parent interface is down

Recommended Action No action is required.

Explanation The physical link on the parent interface has gone down

Recommended Action No action is required.

Explanation The FCIP peer connected to this interface closed the TCP connection

Recommended Action This command will provide the peer IP address of this FCIP interface: show interface. Check to see why the peer closed the TCP connection

Explanation TCP connection to the FCIP peer got reset

Recommended Action The following commands will provide the IP address of the peer and the route used connect to this FCIP peer: show interface, show ip route. Check to see why the peer reset the TCP connection

Explanation This is a PortChannel interface and all its members are operationally down

Recommended Action Enable at least one of the PortChannel members'

Explanation Isolated due to a mismatch in the configured port VSAN of the local and remote ends

Recommended Action Configure the port VSAN of the local and remote interfaces to be the same and perform a 'shutdown' and a 'noshutdown'

Explanation There is an RCF in progress

Recommended Action No action is required.

Explanation The software servicing the data path on the port has failed

Recommended Action No action is required.

Explanation Module that has the tunnel source port of this FCIP interface is not fully online

Recommended Action The module that has the tunnel src port is coming online. Please use show mod to find module status

Explanation Tunnel port source interface unbound

Recommended Action No action is required.

Explanation Tunnel source port of this FCIP interface has been removed

Recommended Action The src interface with ip address that matches the ip address of the bound entity is removed. This happens normally due to the module on which the src interface exists is removed

Explanation This interface belongs to a PortChannel and operational mode of the interface is different from that of the PortChannel

Recommended Action Change the mode and the trunking mode of the PortChannel from auto and check to ensure that the remote end of the interface also belongs to the same Port Channel

Explanation This interface belongs to a PortChannel and operational speed mode of the interface is different from that of the PortChannel

Recommended Action Change the speed of the PortChannel from auto and check to ensure that the remote end of the interface also belongs to the same Port Channel

Explanation This interface belongs to a PortChannel and remote switch WWN of the interface is different from that of the PortChannel

Recommended Action Ensure that this interface is connected to the same remote switch as all the other interfaces in the PortChannel

Explanation This interface belongs to a PortChannel and has been suspended due to an error while bringing it up

Recommended Action Perform a 'shutdown' and a 'noshutdown'. If this happens again obtain output of 'show port internal info / event-history' on the interface

Explanation TCP session to the FCIP peer got closed due to loss of TCP keep alive

Recommended Action This may be due to loss of IP connectivity. The following commands will provide the IP address of the peer and the route used connect to this FCIP peer: show interface, show ip route. Please do a trace route to check the connectivity to the peer using command: trace route ip addr

Explanation Interface is down due to maximum retransmission failure

Recommended Action This may be due to loss of IP connectivity. The following commands will provide the IP address of the peer and the route used connect to this FCIP peer: show interface, show ip route. Please do a trace route to check the connectivity to the peer using command: trace route ip addr

Explanation TCP session to the FCIP peer closed because TCP persist timer expired

Recommended Action This may be due to loss of IP connectivity. The following commands will provide the IP address of the peer and the route used connect to this FCIP peer: show interface, show ip route. Please do a trace route to check the connectivity to the peer using command: trace route ip addr

Explanation Upgrade of the linecard software is in progress

Recommended Action No action is required.

Explanation The VRF for which this interface is a member is removed

Recommended Action No action is required.

Explanation This is a trunking interface and the VSANs configured do not match with the VSANs configured on the remote end

Recommended Action Check the VSANs configured on the local end with the remote end

Explanation Isolated due to a failure during zone merge

Recommended Action No action is required.

Explanation Isolated due to remote zone server not responding

Recommended Action No action is required.

Explanation Operational duplex mode has changed when link came up

Recommended Action No action is required.

Explanation Interface is being recovered from error disabled state

Recommended Action No action is required.

Explanation There was a change in the hardware characteristic of an interface, such as a transceiver module plugged in or removed

Recommended Action No action is required.

Explanation The l2mp-mode on the port has changed

Recommended Action No action is required.

Explanation Operational receive flow control has changed when link came up

Recommended Action No action is required.

Explanation Interface [chars] is trunking, VLANs [chars] are down

Recommended Action The following commands will help determine why this VSAN is down on this interface: show interface, show port internal info interface VSAN, show port internal event-history interface vsan

Explanation Interface [chars] is trunking, VLANs [chars] are up

Recommended Action No action is required.

Explanation Operational transmit flow control has changed when link came up

Recommended Action No action is required.

Explanation Interface is up in mode specified, if applicable

Recommended Action No action is required.

Explanation Operational speed has changed when link came up

Recommended Action No action is required.

Explanation Traffic on specified port is beyond the configured storm-control threshold, and the excess traffic is being dropped

Recommended Action Identify source of traffic storm

Explanation Traffic on specified port has returned to within configured storm-control threshold

Recommended Action No action is required.

ETH_PORT_CHANNEL Messages

This section contains the ETH_PORT_CHANNEL messages.

ETH_PORT_CHANNEL-1

Explanation Module configuration failed

Recommended Action Module will be automatically reset

Explanation No enough memory

Recommended Action No action is required.

Explanation Parameter mapping failed

Recommended Action Specified service is misbehaving; check its status

Explanation Failed to send a multicast message to all modules, usually because some module went down

Recommended Action Run show port-channel consistency to check consistency

ETH_PORT_CHANNEL-2

Explanation A module is reset for not responding or returning error

Recommended Action No action is required.

ETH_PORT_CHANNEL-3

Explanation Some service(s) failed to add or remove ports to port-channel

Recommended Action None

Explanation Some component did not respond to a request in stipulated time.

Recommended Action None

Explanation Compatibility check failed when adding ports to port-channel

Recommended Action Make sure the compatibility parameters are consistent while adding ports to port-channel, or use force option

Explanation General error

Recommended Action No action is required.

Explanation Failed to send a message

Recommended Action No action is required.

Explanation Port-channel num active ports error

Recommended Action None

Explanation Port-channel hwcfg fail error

Recommended Action None

Explanation Port-channel internal error

Recommended Action None

Explanation Port-channel port del in pc_up. Shut response received before bundle member down.

Recommended Action None

Explanation Port-channel port down in pc_up. No bundle member down

Recommended Action None

Explanation Cannot find port-channel in its database, which indicates an inconsistency with an external component

Recommended Action No action is required.

Explanation Port-channel deleted from running config

Recommended Action May need to re-configure the port-channel and its members

Explanation Some component did not respond to a request in stipulated time.

Recommended Action None

Explanation Some operation timed out

Recommended Action Run show port-channel consistency to check all module connectivity and consistency

Explanation Some service failed shadow member change to port-channel

Recommended Action None

Explanation Some service failed shadow port-channel create

Recommended Action None

Explanation Some service failed shadow port-channel delete

Recommended Action None

ETH_PORT_CHANNEL-4

Explanation Port is removed from a port-channel because a different module was inserted to the same slot

Recommended Action You lost some ports from port-channel, check if you want to add ports in the new module to the same port-channel.

Explanation The port is operating as an individual link even though it is locally or remotely configured to be part of a port channel

Recommended Action Check the configuration of the port locally and remotely to ensure that it can operate as part of a port channel

Explanation Cannot find the port in port-channel database, which indicates an inconsistency with an external component

Recommended Action No action is required.

Explanation Warning of possible race condition

Recommended Action No action is required.

Explanation Received an unexpected response and discarded

Recommended Action No action is required.

ETH_PORT_CHANNEL-5

Explanation Auto create process on the port failed

Recommended Action No action is required.

Explanation A port-channel is created

Recommended Action No action is required.

Explanation A port-channel is deleted

Recommended Action No action is required.

Explanation The first operational port in a port-channel is changed

Recommended Action No action is required.

Explanation Compatibility check failed when adding ports to port-channel

Recommended Action Make sure the compatibility parameters are consistent between the ports and the port-channel

Explanation Operational compatibility check failed on the port in a port-channel

Recommended Action Make sure the compatibility parameters are consistent between the ports and the port-channel

Explanation The port-channel number configured on the switch is larger than 128

Recommended Action Delete the set of port channel interface <port-channel interface

Explanation Ports are added to a port-channel

Recommended Action No action is required.

Explanation Port goes down in a port-channel

Recommended Action No action is required.

Explanation Port-channel hot-standby member goes down

Recommended Action No action is required.

Explanation Port goes to hot-standby in a port-channel

Recommended Action No action is required.

Explanation Port-channel member operating in individual mode goes down

Recommended Action No action is required.

Explanation Ports are removed from a port-channel

Recommended Action No action is required.

Explanation Port is suspended in a port-channel

Recommended Action No action is required.

Explanation Port comes up in a port-channel

Recommended Action No action is required.

Explanation The ports subgroup-id got changed

Recommended Action No action is required.

ETH_PORT_CHANNEL-6

Explanation Resync modules with sup after an error or switchover

Recommended Action No action is required.

ETH_PORT_CHANNEL-7

Explanation Port-channel manager finished global synchronization

Recommended Action No action is required.

Explanation Port-channel manager requested a global synchronization from active sup

Recommended Action No action is required.

Explanation Port-channel manager started in active mode

Recommended Action No action is required.

Explanation Port-channel manager started with default configuration

Recommended Action No action is required.

Explanation Port-channel manager started in standby mode

Recommended Action No action is required.

Explanation Port-channel manager started with running configuration

Recommended Action No action is required.

Explanation Port-channel manager started with startup configuration

Recommended Action No action is required.

EUREKA_USD Messages

This section contains the EUREKA_USD messages.

EUREKA_USD-3

Explanation Eureka log message

Recommended Action No action is required.

EVMC Messages

This section contains the EVMC messages.

EVMC-3

Explanation Internal IPC operation failed in Event Manager Client

Recommended Action No action is required.

EVMC-4

Explanation Configuring Policy Action for Monitor Collect Policy is not allowed and hence, has been rejected

Recommended Action No action is required.

EVMC-5

Explanation Event Manager could not initialize local policy store

Recommended Action No action is required.

Explanation Event Manager Client process could not allocate memory

Recommended Action No action is required.

Explanation Event Manager Client could not access HA store

Recommended Action No action is required.

EVMED Messages

This section contains the EVMED messages.

EVMED-2

Explanation Delete from PSS failed

Recommended Action No action is required.

Explanation Write to PSS failed

Recommended Action No action is required.

EVMED-5

Explanation Event manager event detector service disabled

Recommended Action No action is required.

Explanation Event manager event detector service enabled

Recommended Action No action is required.

EVMS Messages

This section contains the EVMS messages.

EVMS-2

Explanation Delete from PSS failed

Recommended Action No action is required.

Explanation Write to PSS failed

Recommended Action No action is required.

Explanation Memory allocation failed. so complete requested information is not being shown

Recommended Action No action is required.

EVMS-4

Explanation The default system policy actions are being skipped

Recommended Action No action is required.

EVMS-6

Explanation As the logflash is full, first of the present event archive files is deleted

Recommended Action No action is required.

EXAMPLE_TEST Messages

This section contains the EXAMPLE_TEST messages.

EXAMPLE_TEST-5

Explanation EXAMPLE_TEST Service Disabled

Recommended Action No action is required.

Explanation EXAMPLE_TEST Service enabled

Recommended Action No action is required.

EXCEPTIONLOG Messages

This section contains the EXCEPTIONLOG messages.

EXCEPTIONLOG-SLOT#-2

Explanation LC Exception event.

Recommended Action No action is required.

EX_SYSLOG Messages

This section contains the EX_SYSLOG messages.

EX_SYSLOG-0

Explanation A Dummy emergency message to test syslogd from ex_syslog. [dec] is the message count

Recommended Action No action is required.

EX_SYSLOG-1