- Preface
-
- QoS Classification, Policing, and Marking on a LAC
- Policing and Shaping Overview
- IPv6 QoS: MQC Traffic Shaping
- Distribution of Remaining Bandwidth Using Ratio
- QoS Percentage-Based Shaping
- Ethernet Overhead Accounting
- MQC Traffic Shaping Overhead Accounting for ATM
- QoS Policy Accounting
- PPP Session Queueing on ATM VCs
- VP/VC Shaping for PPPoEoA/PPPoA
- Hierarchical Color-Aware Policing
- IPv6 QoS: MQC Traffic Policing
- Traffic Policing
- Policer Enhancement Multiple Actions
- Control Plane Policing
- Management Plane Protection
- Class-Based Policing
- QoS Percentage-Based Policing
- Port-Shaper and LLQ in the Presence of EFPs
- Two-Rate Policer
- Punt Policing and Monitoring
- Adaptive QoS over DMVPN
- Regulating Packet Flow Using Traffic Shaping
- Regulating Packet Flow on a Per-Class Basis Using Class-Based Traffic Shaping
- Service Groups
- Header Compression
- Configuring RTP Header Compression
-
- Applying QoS Features Using the MQC
- 3-Level User-Defined Queuing Policy Support
- Complex Hierarchical Scheduling: Fragmented Policies (i.e, Policies Aggregation)
- Configuring IP to ATM Class of Service
- QoS Scheduling
- QoS Hierachical Scheduling
- Legacy QoS Command Deprecation
- QoS Packet Marking
- QoS Packet-Matching Statistics Configuration
- Set ATM CLP Bit Using Policer
- EVC Quality of Service
- Quality of Service for Etherchannel Interfaces
- Aggregate EtherChannel Quality of Service
- PPPoGEC Per Session QoS
- IPv6 Selective Packet Discard
- Per ACE QoS Statistics
- QoS Packet Policing
- Queue Limits and WRED
- Information About QoS for Etherchannels
- Applying QoS Features Using the MQC
- Classifying Network Traffic Using NBAR
- NBAR2 Protocol Pack
- Enabling Protocol Discovery
- Configuring NBAR Using the MQC
- DSCP-Based Layer 3 Custom Applications
- MQC Based on Transport Hierarchy
- NBAR Categorization and Attributes
- Reporting Extracted Fields Through Flexible NetFlow
- NBAR2 Custom Protocol
- NBAR2 Protocol Pack Hitless Upgrade
- NBAR Web-based Custom Protocols
- NBAR2 HTTP-Based Visibility Dashboard
- NBAR Coarse-Grain Classification
- SSL Custom Application
- Fine-Grain NBAR for Select Applications
- NBAR Custom Applications Based on DNS Name
- DNS Protocol Classification Change
- About Attributes
- Customizing NBAR2 Built-in Protocols
Quality of Service Configuration Guide, Cisco IOS XE 17.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 11, 2022
Feedback