- Preface
-
- Basic IP Routing
- IPv6 Routing: Static Routing
- Configuring IP Routing Protocol-Independent Features
- Configuring Route Leaking and Redistribution
- IPv4 Loop-Free Alternate Fast Reroute
- IP Event Dampening
- PBR Recursive Next Hop
- PBR Support for Multiple Tracking Options
- PBR Match Track Object
- IPv6 Policy-Based Routing
- Multi-VRF Selection Using Policy-Based Routing
- Multi-VRF Support
- Default Passive Interfaces
- Policy-Based Routing
- Enhanced Policy-Based Routing and Site Manager
- PPPoE over BDI
- SGT Based PBR
- SGT Based QoS
- Policy-Based Routing Default Next-Hop Routes
- PBR Next-Hop Verify Availability for VRF
- QoS Policy Propagation via BGP
- NetFlow Policy Routing
- Recursive Static Route
- TCP Authentication Option
- Configuring On-Demand Routing
- DAPR Overview
- Unicast Reverse Path Forwarding Strict Mode
- Unicast Reverse Path Forwarding ACL Support
-
- Bidirectional Forwarding Detection
- Static Route Support for BFD over IPv6
- OSPFv3 for BFD
- BFD on BDI Interfaces
- BFD Single-Hop Authentication
- BFD Multihop Support for IPv4 Static Routes
- IS-IS IPv6 Client for BFD
- IS-IS Client for BFD C-Bit Support
- BFD Dampening
- Bidirectional Forwarding Detection on Link Aggregation Group Bundle
-
- Cisco BGP Overview
- BGP 4
- Configuring a Basic BGP Network
- BGP 4 Soft Configuration
- BGP Support for 4-byte ASN
- IPv6 Routing: Multiprotocol BGP Extensions for IPv6
- IPv6 Routing: Multiprotocol BGP Link-Local Address Peering
- IPv6 Multicast Address Family Support for Multiprotocol BGP
- Configuring Multiprotocol BGP (MP-BGP) Support for CLNS
- BGP IPv6 Admin Distance
- Connecting to a Service Provider Using External BGP
- BGP Route-Map Continue
- BGP Route-Map Continue Support for Outbound Policy
- Removing Private AS Numbers from the AS Path in BGP
- Configuring BGP Neighbor Session Options
- BGP Neighbor Policy
- BGP Dynamic Neighbors
- BGP Support for Next-Hop Address Tracking
- BGP Maximum-Prefix on IOS XE
- BGP Support for Dual AS Configuration for Network AS Migrations
- Configuring Internal BGP Features
- BGP VPLS Auto Discovery Support on Route Reflector
- BGP FlowSpec Route-reflector Support
- BGP Flow Specification Client
- BGP NSF Awareness
- BGP Graceful Restart per Neighbor
- BGP Support for BFD
- IPv6 NSF and Graceful Restart for MP-BGP IPv6 Address Family
- BGP Persistence
- BGP Link Bandwidth
- Border Gateway Protocol Link-State
- iBGP Multipath Load Sharing
- BGP Multipath Load Sharing for Both eBGP and iBGP in an MPLS-VPN
- Loadsharing IP Packets over More Than Six Parallel Paths
- BGP Policy Accounting
- BGP Policy Accounting Output Interface Accounting
- BGP Cost Community
- BGP Support for IP Prefix Import from Global Table into a VRF Table
- BGP Support for IP Prefix Export from a VRF Table into the Global Table
- BGP per Neighbor SoO Configuration
- Per-VRF Assignment of BGP Router ID
- BGP Next Hop Unchanged
- BGP Support for the L2VPN Address Family
- BGP Event-Based VPN Import
- BGP Best External
- BGP PIC Edge for IP and MPLS-VPN
- Detecting and Mitigating a BGP Slow Peer
- Configuring BGP: RT Constrained Route Distribution
- Configuring a BGP Route Server
- BGP Diverse Path Using a Diverse-Path Route Reflector
- BGP Enhanced Route Refresh
- Configuring BGP Consistency Checker
- BGP—Origin AS Validation
- BGP MIB Support
- BGP 4 MIB Support for Per-Peer Received Routes
- BGP Support for Nonstop Routing (NSR) with Stateful Switchover (SSO) Using L2VPN VPLS
- BGP Support for Nonstop Routing (NSR) with Stateful Switchover (SSO) Using L2VPN VPLS
- BGP NSR Auto Sense
- BGP NSR Support for iBGP Peers
- BGP Graceful Shutdown
- BGP — mVPN BGP sAFI 129 - IPv4
- BGP-MVPN SAFI 129 IPv6
- BFD—BGP Multihop Client Support, cBit (IPv4 and IPv6), and Strict Mode
- BGP Attribute Filter and Enhanced Attribute Error Handling
- BGP Additional Paths
- BGP-Multiple Cluster IDs
- BGP-VPN Distinguisher Attribute
- BGP-RT and VPN Distinguisher Attribute Rewrite Wildcard
- VPLS BGP Signaling
- Multicast VPN BGP Dampening
- BGP—IPv6 NSR
- BGP-VRF-Aware Conditional Advertisement
- BGP—Selective Route Download
- BGP—Support for iBGP Local-AS
- eiBGP Multipath for Non-VRF Interfaces (IPv4/IPv6)
- L3VPN iBGP PE-CE
- BGP NSR Support for MPLS VPNv4 and VPNv6 Inter-AS Option B
- BGP-RTC for Legacy PE
- BGP PBB EVPN Route Reflector Support
- Overview BGP Monitoring Protocol
- VRF Aware BGP Translate-Update
- BGP Support for MTR
- BGP Accumulated IGP
- BGP MVPN Source-AS Extended Community Filtering
- BGP AS-Override Split-Horizon
- BGP Support for Multiple Sourced Paths Per Redistributed Route
- Maintenance Function: BGP Routing Protocol
- BGP Support for TCP Authentication Option
- BGP Unlabeled and Labeled Unicast in the Same Session: Label-Unicast Unique Mode
- BGP Replace ASNs in the AS Path
- Configuring Graceful Insertion and Removal
- BGP Large Community
- Support for BGP VPNv4, VPNv6, and EVPN Prefixes with IPv6 Next-Hop
-
- EIGRP
- IPv6 Routing: EIGRP Support
- EIGRP MPLS VPN PE-CE Site of Origin
- EIGRP Nonstop Forwarding Awareness
- EIGRP Nonstop Forwarding
- EIGRP IPv6 NSF/GR
- EIGRP Prefix Limit Support
- EIGRP Support for Route Map Filtering
- EIGRP Route Tag Enhancements
- BFD Support for EIGRP IPv6
- EIGRP Loop-Free Alternate Fast Reroute
- Add Path Support in EIGRP
- EIGRP Wide Metrics
- EIGRP/SAF HMAC-SHA-256 Authentication
- IP EIGRP Route Authentication
- EIGRP IPv6 VRF-Lite
- EIGRP Stub Routing
- EIGRP Support for 6PE/6VPE
- EIGRP Over the Top
- EIGRP OTP VRF Support
- EIGRP Classic to Named Mode Conversion
- EIGRP Scale for DMVPN
- EIGRP IWAN Simplification
-
- IS-IS Overview and Basic Configuration
- IPv6 Routing: Route Redistribution
- IPv6 Routing: IS-IS Support for IPv6
- Configuring Integrated IS-IS Protocol Shutdown Support Maintaining Configuration Parameters
- Customizing IS-IS for Your Network Design
- Segment Routing—IS-IS v4 node SID
- IS-IS MIB
- IS-IS Support for an IS-IS Instance per VRF for IP
- Overview of IS-IS Fast Convergence
- Setting Best Practice Parameters for IS-IS Fast Convergence
- Best Practices for Increased Scaling of IS-IS Neighbors
- Reducing Failure Detection Times in IS-IS Networks
- IPv6 Routing: IS-IS Multitopology Support for IPv6
- Reducing Link Failure and Topology Change Notification Times in IS-IS Networks
- Enabling Enhanced IS-IS Fast Flooding of LSPs
- IS-IS Support for Route Tags
- Enhancing Security in an IS-IS Network
- IS-IS IPv6 Administrative Tag
- IS-IS IPv6 Advertise Passive Only
- IS-IS IPv6 Multi-Process Support
- ISIS Local Microloop Protection
- IS-IS Multi-Part TLVs
-
- Locator ID Separation Protocol (LISP) Overview
- Configuring LISP (Locator ID Separation Protocol)
- LISP Multicast
- LISP Shared Model Virtualization
- LISP Parallel Model Virtualization
- LISP Host Mobility Across Subnet
- LISP Delegate Database Tree (DDT)
- LISP ESM Multihop Mobility
- LISP Support for Disjoint RLOC Domains
- LISP Data Plane Security
- LISP Reliable Registration
- Overlapping Prefix
- LISP Generalized SMR
- TTL Propagate Disable and Site-ID Qualification
- DNA SA Border Node Support
- LISP Support for TCP Authentication Option
-
- Configuring OSPF
- IPv6 Routing: OSPFv3
- IPv6 Routing: OSPFv3 Authentication Support with IPsec
- OSPFv2 Cryptographic Authentication
- OSPFv3 External Path Preference Option
- OSPFv3 Graceful Restart
- Graceful Shutdown Support for OSPFv3
- OSPF Stub Router Advertisement
- OSPF Update Packet-Pacing Configurable Timers
- OSPF Sham-Link Support for MPLS VPN
- OSPF Support for Multi-VRF on CE Routers
- OSPFv3 Multiarea Adjacency
- OSPFv2 Autoroute Exclude
- OSPFv3 Address Families
- OSPFv3 Authentication Trailer
- Autoroute Announce and Forwarding Adjacencies For OSPFv3
- OSPFv3 Autoroute Exclude
- OSPFv2 IP FRR Local Microloop Avoidance
- OSPFv2-OSPF Live-Live
- OSPF Forwarding Address Suppression in Translated Type-5 LSAs
- OSPF Inbound Filtering Using Route Maps with a Distribute List
- OSPFv3 Route Filtering Using Distribute-List
- OSPF Shortest Path First Throttling
- OSPF Support for Fast Hello Packets
- OSPF Incremental SPF
- OSPF Limit on Number of Redistributed Routes
- OSPFv3 Fast Convergence: LSA and SPF Throttling
- OSPFv3 Max-Metric Router LSA
- OSPF Link-State Advertisement Throttling
- OSPF Support for Unlimited Software VRFs per PE Router
- OSPF Area Transit Capability
- OSPF Per-Interface Link-Local Signaling
- OSPF Link-State Database Overload Protection
- OSPF MIB Support of RFC 1850 and Latest Extensions
- OSPF Enhanced Traffic Statistics
- TTL Security Support for OSPFv3 on IPv6
- Configuring OSPF TTL Security Check and OSPF Graceful Shutdown
- OSPF Sham-Link MIB Support
- OSPF SNMP ifIndex Value for Interface ID in Data Fields
- OSPFv2 Local RIB
- OSPF Support for Forwarding Adjacencies over MPLS TE Tunnels
- Enabling OSPFv2 on an Interface Basis
- OSPF Nonstop Routing
- OSPFv3 NSR
- OSPFv2 Loop-Free Alternate Fast Reroute
- OSPFv3 MIB
- Prefix Suppression Support for OSPFv3
- OSPFv3 VRF-Lite/PE-CE
- OSPFv3 ABR Type 3 LSA Filtering
- OSPFv3 Demand Circuit Ignore
- OSPF IPv4 Remote Loop-Free Alternate IP Fast Reroute
- Prerequisites for OSPFv3 Multiarea Adjacency
- OSPF Limiting Adjacency Formations
-
- mGRE Tunnel Support over IPv6
- IP over IPv6 Tunnels
- Manually Configured IPv6 over IPv4 Tunnels
- Configuring Physical Interfaces
- Configuring Virtual Interfaces
- Implementing Tunnels
- Tunnel Route Selection
- MPLS VPN over mGRE
- IP Tunnel MIBs
- Synchronous Ethernet (SyncE) ESMC and SSM
- 1+1 SR-APS Without Bridging
- IPv6 Rapid Deployment
- IPv6 Automatic 6to4 Tunnels
- GRE IPv6 Tunnels
- Cisco Discovery Protocol over GRE Tunnels
- ISATAP Tunnel Support for IPv6
- VRF-Aware Tunnels
- Ethernet over GRE Tunnels
- QoS on Ethernet over GRE Tunnels
- VRF-Aware IPv6 Rapid Deployment Tunnel
- IP Tunnel - GRE Key Entropy Support
-
- Configuring Basic Performance Routing
- Performance Routing Version 3
- PfRv3 Transit Site Support
- PfRv3 Zero SLA Support
- PfRv3 Path of Last Resort
- PfRv3 Fallback Timer
- PfRv3 Probe Reduction
- PfRv3 Intelligent Load Balance
- Path Preference Hierarchy
- PfRv3 Remote Prefix Tracking
- PfRv3 Per Interface Probe Tuning
- PfRv3 Inter-DC Optimization
- Direct Cloud Access
- Channel-based Metrics Measurement
- PfRv3 Event Tracing
- PfRv3 Command References
IP Routing Configuration Guide, Cisco IOS XE 17.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- November 2, 2022
Feedback