About this Manual

About this Manual

This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.

This section provides the following information:

Revision History

Date

Notes

February 2018

  • Added warning statements 188 and 263 in the chapter, “Safety”.

May 2016

  • Removed warning statement 8010 from the chapter, “Safety”

October 2015

  • Removed warning statement 1027 from the chapter, “Safety”.
  • Updated for R10.5.1.1.

July 2015

  • Added warning statements 2, 25, 38, 41, 43, 328, 342, 1021, 1027, 1032, and 1077 in the chapter “Safety”.
  • Removed warning statements 345 and 1008 from the chapter “Safety”.

November 2013

This is the first release of this publication.

Document Objectives

This document provides safety and compliance rules for the Cisco Network Convergence System (NCS) platforms. Use this document in conjunction with the appropriate publications listed in the Related Documentation section.

Audience

To use this publication, you should be familiar with Cisco or equivalent NCS transmission hardware and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably have experience as a telecommunications technician.

Document Organization

This Regulatory Compliance and Safety Information for Cisco NCS 2000 Series is organized into the following chapters:

Related Documentation

Use this document in conjunction with the following publications:

  • Cisco NCS 2000 Series Hardware Installation Guide
  • Cisco NCS 2000 Series Line Card Configuration Guide
  • Cisco NCS 2000 Series Network Configuration Guide
  • Cisco NCS 2000 Series Control Card and Node Configuration Guide
  • Cisco NCS 2000 Series Troubleshooting Guide
  • Cisco NCS 2000 Series TL1 Command Guide

Document Conventions

This publication uses the conventions shown in Table 1 .

 

Table 1 Document Conventions

Convention
Application

boldface

Commands and keywords in body text.

italic

Command input that is supplied by the user.

[ ]

Keywords or arguments that appear within square brackets are optional.

{ x | x | x }

A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.

Ctrl

The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.

screen font

Examples of information displayed on the screen.

boldface screen font

Examples of information that the user must enter.

< >

Command parameters that must be replaced by module-specific codes.


Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.



Caution Means reader be careful. In this situation, the user might do something that could result in equipment damage or loss of data.

 


Warning



IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Obtaining Cisco Network Convergence System Information

This section contains information that is specific to NCS products. For information that pertains to all of Cisco, refer to the Obtaining Documentation and Submitting a Service Request section.

Where to Find Safety and Warning Information

For safety and warning information, refer to Regulatory Compliance and Safety Information for Cisco NCS 2000 Series.

This publication describes the international agency compliance and safety information for the Cisco NCS system. It also includes translations of the safety warnings that appear in the Cisco NCS system documentation.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.