March 2007

Changed fuse rating and power consumption specifications in Appendix A.

July 2007

Modified "Caution" in the "Shelf Configuration" section of the "Electrical Cards" chapter.

August 2007

Updated the note in the Path Protection Circuits section of the Circuits and Tunnels chapter.

October 2007

Updated About this Manual chapter.

April 2008

Added a note in the User Password, Login, and Access Policies section in the Security chapter.

Updated note on protection switching in Link Capacity Adjustment section in Circuits and Tunnels chapter.

May 2008

Updated the table, Software and Hardware Compatibility—XC10G and XC-VXC-10G Configurations in the Shelf and Backplane Hardware chapter.

Added power-level LED information for TCC2 and TCC2P cards in Common Control Cards chapter.

July 2008

Updated the section "15454_MRC-12 Port-Level Indicators" in the Optical Cards chapter, to show the correct number and status of the Rx indicator.

Added DS-3/EC1-48 card support for the EIA type MiniBNC in Table 1-2, Chapter 1, Shelf and Backplane Hardware.

Deleted the note in the Power and Ground Description section in Chapter 1, Shelf and Backplane Hardware.

Added a note in section 10.1 "Timing Parameters" of Chapter 10, Timing.

September 2008

•Added a Warning for all optical cards in Chapter 4, Optical Cards.

•Added a note in Card Default Settings and Node Default Settings section of Appendix C, Network Element Defaults.

•Updated FC_MR-4 Statistics Parameters table in the Chapter 15, Performance Monitoring.

•Updated the Software and Hardware Compatibility section in Chapter 1, Shelf and Backplane Hardware.

December 2008

•Updated the list of PM parameters for MRC-12 card in Chapter 15, Performance Monitoring.

•Updated the UBIC-V and UBIC-H sections in Chapter 1, Shelf and Backplane Hardware.

March 2009

Updated Table 1-17 and Table 1-20 in UBIC-V and UBIC-H sections in Chapter 1, Shelf and Backplane Hardware.

April 2009

Updated section DS1/E1-56 Card Specifications in Appendix A Hardware Specifications

June 2009

•Updated the figure AEP Wire-Wrap Connections to Backplane Pins in Chapter 1, Shelf and Backplane Hardware.

•Updated "OC-N Speed Upgrades" in Chapter 12, SONET Topologies and Upgrades.

July 2009

•Updated Table 1-2 in Chapter 1, Shelf and Backplane Hardware.

•Updated the "Common-Control Card Software Release Compatibility" table in the chapter 2, Common Control Cards.

•Added a new section, Comparison of the Protection Schemes in the chapter, SONET Topologies and Upgrades.

August 2009

•Updated the first footnote in the table titled ONS 15454 Software and Hardware Compatibility—XC10G and XC-VXC-10G Configurations in the chapter, Shelf and Backplane Hardware.

•Added a caution in section DS3XM-12 Card of Chapter 3, Electrical Cards.

November 2009

•Added a new section, SDH Tunneling in the chapter, Circuits and Tunnels.

•Updated the table "Line Rate Configurations Per 15454_MRC-12 Port, Based on Available Bandwidth" in the chapter, "Optical Cards".

January 2010

Updated the section "OC-N Speed Upgrades" in the chapter SONET Topologies and Upgrades.

February 2010

Changed the BIEC parameter to BIT-EC in Chapter, "Performance Monitoring".

April 2010

Updated the section "SNMP Overview" in the chapter "SNMP".

May 2010

Updated the note in the section "DS3/EC1-48 Card" in the chapter "Electrical Card".

June 2010

Updated the caution in the section "DS1/E1-56 Card" in the chapter "Electrical Cards".

November 2010

Updated the figure "ML1000-2 Faceplate and Block Diagram" under the section "ML1000-2 Card" in the chapter "Ethernet Cards".

June 2011

•Updated the section "AIC-I Card" in the chapter "Common Control Cards".

•Updated the tables "DS3XM-6 Card PMs" and "DS3XM-12 Card PMs" in the chapter "Performance Monitoring".

October 2011

Updated the section "AMP Champ EIA" in the chapter, "Shelf and Backplane Hardware".

January 2012

Updated the privileges for the Download/Cancel operations in the table, "ONS 15454 SDH Security Levels—Network View " in the chapter, "Security".

February 2012

Updated the table "SFP and XFP Card Compatibility" in the chapter "Optical Cards".

March 2012

•Updated the section "TCC2P Functionality" in the chapter, "Common Control Cards".

•Updated the section "DS3/EC1-48 Card Specifications" in the appendix "Hardware Specifications".

August 2012

The full length book-PDF was generated.

Chapter 1 "Shelf and Backplane Hardware"

Includes descriptions of the rack, backplane, backplane pins, ferrites, power and ground, fan-tray assembly, air filter, card slots, cables, cable connectors, and cable routing.

Chapter 2 "Common Control Cards"

Includes descriptions of the TCC2, TCC2P, XCVT, XC-VXC-10G, XC10G, and AIC-I cards.

Chapter 3 "Electrical Cards"

Includes descriptions of EC-1, DS-1, DS-3, and DS3E cards, card temperature ranges, and compatibility.

Chapter 4 "Optical Cards"

Includes descriptions of the OC-3, OC-12, OC-48, OC-192, and MRC-12 cards, as well as card temperature ranges and card compatibility.

Chapter 5 "Ethernet Cards"

Includes descriptions of the E-Series, G-Series, and ML-Series Ethernet cards and Gigabit Interface Converters (GBICs).

Chapter 6 "Storage Access Networking Cards"

Includes descriptions of the FC_MR-4 Fiber Channel/Fiber Connectivity (FICON) card, card temperature ranges, compatibility, and applications.

Chapter 7 "Card Protection"

Includes electrical and optical card protection methods.

Chapter 8 "Cisco Transport Controller Operation"

Includes information about CTC installation, the CTC window, computer requirements, software versions, and database reset and revert.

Chapter 9 "Security"

Includes user set up information, security parameters and privileges, RADIUS authentication, and audit trail information.

Chapter 10 "Timing"

Includes node and network timing information.

Chapter 11 "Circuits and Tunnels"

Includes STS and VT, bidirectional and unidirectional, revertive and nonrevertive, electrical and optical, multiple and path trace circuit information, as well as DCC tunnels.

Chapter 12 "SONET Topologies and Upgrades"

Includes the SONET configurations used by the ONS 15454; includes bidirectional line switch rings (BLSRs), path protection configurations, linear add/drop multiplexers (ADMs), subtending rings, and optical bus configurations, as well as information about upgrading optical speeds within any configuration.

Chapter 13 "Management Network Connectivity"

Includes IP addressing scenarios and information about IP networking with the ONS 15454, as well as information about provisionable patchcords, the routing table, external firewalls, and open gateway network element (GNE) networks.

Chapter 14 "Alarm Monitoring and Management"

Describes CTC alarm management including alarm severities, alarm profiles, alarm suppression, and external alarms and controls.

Chapter 15 "Performance Monitoring"

Describes the various performance monitoring parameters.

Chapter 16 "SNMP"

Explains Simple Network Management Protocol (SNMP) as implemented by the Cisco ONS 15454.

"Hardware Specifications"

Provides specifications for the ONS 15454 shelf assembly, cards, and pluggable devices.

"Administrative and Service States"

Describes the extended state model for cards, ports, and cross-connects.

"Network Element Defaults"

Lists card, node, and CTC-level network element (NE) defaults.

boldface

Commands and keywords in body text.

italic

Command input that is supplied by the user.

[     ]

Keywords or arguments that appear within square brackets are optional.

{ x | x | x }

A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.

Ctrl

The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.

screen font

Examples of information displayed on the screen.

boldface screen font

Examples of information that the user must enter.

<     >

Command parameters that must be replaced by module-specific codes.

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

Advarsel

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER