Table of Contents
Cisco Prime Cable Provisioning 5.3.2 Release Notes
Important Points to Know Before You Begin
Updated Active Links in Device Details page
Red Hat Enterprise Linux and CentOS 7.2 Support
Prime Cable Provisioning 5.3.2 Bugs
Obtaining Documentation and Submitting a Service Request
Introduction
Cisco Prime Cable Provisioning, referred to as Prime Cable Provisioning throughout this document, automates the tasks of provisioning and managing customer premises equipment (CPE) in a broadband service-provider network. The application provides a simple and easy way to deploy high-speed data, voice technology, and home networking devices.
Prime Cable Provisioning can be scaled to suit networks of virtually any size, even those deploying millions of devices. It also offers high availability, made possible by its distributed architecture with centralized management.
Prime Cable Provisioning incorporates support for many technologies to provide provisioning services for your network. These technologies include:
- DOCSIS high-speed data
- PacketCable voice service, both Secure and Basic work flows
- Non-secure CableHome
- Open Cable Set top box
- eRouter 1.0
- DPoE (DOCSIS Provisioning of EPON)
For detailed information about Prime Cable Provisioning features, see the Cisco Prime Cable Provisioning User Guide 5.3.
Important Points to Know Before You Begin
- Before installing PCP 5.3.2, please check the system requirements mentioned in the Cisco Prime Cable Provisioning Quick Start Guide 5.3 are met.
- If you are migrating from an earlier version of Cisco PCP or BAC to Cisco PCP 5.3.2, you must review the Release Notes that were published across the releases.
- License acquired for Cisco PCP 5.2.x or earlier releases is not valid for Cisco PCP 5.3.2. You need to get the permanent or evaluation license of 5.3 to upgrade from 4.2.x/5.0/5.1/5.2 to 5.3.2 or for a fresh installation. For more information, refer to Licensing Prime Cable Provisioning section in Cisco Prime Cable Provisioning Quick Start Guide 5.3 .
- Solaris operating system support will be included in all Cisco PCP 5.3.x releases. The 5.3.x release train is the last version of PCP which will be released for Solaris. Future major releases of PCP will not be supported on the Solaris operating system.
New Features and Enhancements
This release Cisco Prime Cable Provisioning 5.3.2, supports the following new features:
Enhanced MAC Address Search
The search for a device using the MAC address option has been enhanced in this release.
For example, the device with MAC address "1,6,aa:bb:cc:dd:ee:ff" can be searched by entering the address in the following ways:
You can also use a wild card character (*) to enhance the search function. While entering the MAC address of the device, ensure that you enter the commas (,), colons (:) and wild card(*) appropriately.
Updated Active Links in Device Details page
In the view device details page, below fields have been modified to active links.
Red Hat Enterprise Linux and CentOS 7.2 Support
Cisco PCP 5.3.2 supports installing and running all the components such as RDU, DPE, CNR-EP, KDC and PWS on Red Hat Enterprise Linux 7.2 or Cent OS 7.2 using x86_64 bit hardware system. It also supports the combination of any platforms that include RDU, DPE, KDC, and CNR DHCP extension running on Linux.
Note Prime Cable Provisioning 5.3.2 does not support RDU HA for RHEL7.2 and CentOS 7.2 based deployments
Device Last Seen Time
Cisco PCP 5.3.2 is enhanced with a new functionality using which the DPE stores the last transaction time of a device in the database. The last transaction time is captured as last seen time of a device in DPE when it receives a device configuration request from the CNR.
To view this information, you need to execute the below DPE CLI commands:
- show device-attribute last-seen-time mac <macaddress> - used for an IPv4 device
- show device-attribute last-seen-time duid <duid> - used for an IPv6 device
- dump device-attributes – used for dumping all the device attributes from a DPE. This information is exported as a csv file and is stored as mentioned below.
BPR_DATA/dpe/cache/device_attributes.csv.
For a device, the last transaction time may not exist in all the DPE’s associated to a Provisioning Group. It is stored only on the DPEs the device had dealt with and it might differ in each DPE. The latest transaction time will be available from the DPE which the device has contacted recently.
Note This new feature might utilize about 1 to 1.5 GB disk space on BPR_DATA directory of DPE.
Prime Cable Provisioning 5.3.2 Bugs
For more information on a specific bug or to search all bugs in a particular Prime Cable Provisioning release, see Using the Bug Toolkit.
Resolved Bugs
Table 1 Resolved bug list in Prime Cable Provisioning 5.3.2.
Open Bugs
Table 2 Open Bug List in Prime Cable Provisioning 5.3.2.
Using the Bug Toolkit
This section explains how to use the Bug Toolkit to search for a specific bug or to search for all bugs in a release.
Step 1 Go to Cisco Software Bug Toolkit.
Step 2 At the Log In screen, enter your registered Cisco.com user name and password; then, click Log In. The Bug Toolkit page opens.
Note If you do not have a Cisco.com user name and password, you can register for them at http://tools.cisco.com/RPF/ register/register.do.
Step 3 To search for a specific bug, click the Search Bugs tab, enter the bug ID in the Search for Bug ID field, and click Go.
Step 4 To search for bugs in the current release, click the Search Bugs tab and specify the following criteria:
Note Do not enter Cisco Prime Cable Provisioning. Cisco Prime Cable Provisioning is the new product name for the former Cisco Broadband Access Center. At this time, the Bug Toolkit does not accept Cisco Prime Cable Provisioning as the product name.
- Software Version —[Product Version].
- Search for Keyword(s)—Separate search phrases with boolean expressions (AND, NOT, OR) to search within the bug title and details.
- Advanced Options—You can either perform a search using the default search criteria or define custom criteria for an advanced search. To customize the advanced search, click Use custom settings for severity, status, and others and specify the following information:
– Severity—Choose the severity level.
– Status—Choose Terminated, Open, or Fixed.
- Choose Terminated to view terminated bugs. To filter terminated bugs, uncheck the Terminated check box and select the appropriate sub option (Closed, Junked, or Unreproducible) that appears below the Terminated check box. Select multiple options as required.
- Choose Open to view all open bugs. To filter the open bugs, uncheck the Open check box and select the appropriate suboptions that appear below the Open check box. For example, if you want to view only new bugs in Prime Cable Provisioning 5.3.2 choose only New.
- Choose Fixed to view fixed bugs. To filter fixed bugs, uncheck the Fixed check box and select the appropriate sub option (Resolved or Verified) that appears below the Fixed check box.
- Advanced—Check the Show only bugs containing bug details check box to view only those bugs that contain detailed information, such as symptoms and workarounds.
- Modified Date—Choose this option to filter bugs based on the date when the bugs were last modified.
- Results Displayed Per Page—Specify the number of bugs to display per page.
Step 5 Click Search. The Bug Toolkit displays the list of bugs based on the specified search criteria.
Note For example, if a bug applies to both Cisco Prime Cable Provisioning 5.1 and Cisco Prime Cable Provisioning 5.2, the headline and Release-note enclosure contain the earlier Cisco PCP product terminology.
Step 6 To export the results to a spreadsheet:
1.In the Search Bugs tab, click Export All to Spreadsheet.
2. Specify the filename and location at which to save the spreadsheet.
3. Click Save. All bugs retrieved by the search are exported.
If you cannot export the spreadsheet, log into the Technical Support website at http://www.cisco.com/cisco/web/support/index.html or contact the Cisco Technical Assistance Center (TAC).
Product Documentation
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
See the Cisco Prime Cable Provisioning Documentation Overview for the list of Prime Cable Provisioning guides.
See the Cisco Prime Network Registrar 8.x Documentation Overview for the list of Cisco Prime Network Registrar guides.
See the Prime Cable Provisioning Upgrade Matrix for the upgrade compatibility of the current release with the previous releases.
See the Prime Cable Provisioning Compatibility Matrix for the PNR, PG and API compatibility of the current release with the previous releases.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Trademark Notice
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.