To change the current working directory, use cd command in XR EXEC mode.

To clear any inconsistencies between running configuration and binary startup configuration maintained on the disk use cfs check command in XR EXEC mode.

To perform an ASCII backup of the system's running configuration and to clear inconsistencies between running configuration and ASCII backup copy maintained on the disk, use the clear configuration ascii inconsistency command in XR EXEC mode.

To copy a file from a source (such as a network server) to a destination (such as a flash disk), use copy command in XR EXEC mode.

Invalid Combinations of Source and Destination

Some combinations of source and destination are invalid. Specifically, you cannot copy the following:

• From a running configuration to a running configuration

• From a network device to a network device (for example, copy ftp: rcp: )

Using TFTP

TFTP is a simplified version of FTP that allows files to be transferred from one computer to another over a network, usually without the use of client authentication (for example, username and password).

The syntax is as follows:

copy tftp://hostname /ipaddress/directory-path pie name target-device [location {node-id | all}]

Router# copy tftp://1.1.1.1/images/software.pie disk1:

Note	Some Cisco IOS XR images may be larger than 32 MB, and the TFTP services provided by some vendors may not support a file this large. If you do not have access to a TFTP server that supports files larger than 32 MB, download the software image using FTP or rcp as described in the following sections.

Using FTP

FTP servers require a username and password for each client request. Cisco IOS XR software sends the first valid username in the following list:

1. The username and password specified in the copy command, if a username is specified.

   The syntax is as follows:

   copy ftp:// username : password @ hostname or ipaddress/directory-path/pie-name target-device [location {node-id | all}]

   Example:

   
   Router# copy ftp://john:secret@10.1.1.1/images/software.pie disk1:
   

2. An “anonymous” username and password. The anonymous password is “root@ip address,” where “ip address” is the IP address of the local networking device.

3. A password “username@iosname.domain” formed by the networking device. The variable “username” is the username associated with the current session, “iosname” is the configured hostname, and “domain” is the domain of the networking device.

The username and password must be associated with an account on the FTP server. If you are writing to the network server, the FTP server must be properly configured to accept the FTP write request from the user on the networking device.

If the network server has a directory structure, the configuration file or image is written to or copied from the directory associated with the username on the network server. For example, if the system image resides in the home directory of a user on the network server, specify the name of that user as the remote username.

Refer to the documentation for your FTP server for more details.

Using rcp

The rcp protocol requires a username upon each request. When you copy a configuration file or image between the networking device and an rcp server, the Cisco IOS XR software sends the first valid username in the following list:

1. The remote username specified in the copy command, if one is specified.

2. The username set by the rcp client username command, if the command is configured.

3. The networking device hostname.

For the rcp copy request to process successfully, an account must be defined on the network server for the remote username. If the network administrator of the destination server did not establish an account for the remote username, this command does not run successfully. If the network server has a directory structure, the configuration file or image is written to or copied from the directory associated with the remote username on the network server. For example, if the system image resides in the home directory of a user on the network server, specify the name of that user as the remote username.

If you are writing to the network server, the rcp server must be properly configured to accept the rcp write request from the user on the networking device. For UNIX systems, add an entry to the .rhosts file for the remote user on the rcp server. Suppose the networking device contains the following configuration lines:

hostname Rtr1
ip rcp remote-username User0
    

If the IP address of the networking device translates to company.com, then the .rhosts file for User0 on the rcp server should contain the following line:

company.com Rtr1
    

See the documentation for your rcp server for more details.

If you are using a personal computer as a file server, the computer must support remote shell (rsh) protocol.

Using xml-schema

Use the xml-schema keyword to obtain the most up-to-date XML schemas (.xsd files) from the router. Using this keyword is useful to prevent the use of outdated schemas in the event that router software updates include schema updates. The tar ball file includes all active schema files. It does not include schemas that are activated by specific package installation envelopes (PIEs) if those PIEs are not installed and activated on the router.

Using HTTP(s)

HTTP(s) allows files to be transferred from one webserver to another over a network. The user authentication depends on the webserver configuration. The following copy operations are supported:

• Copy a file from webserver to device via HTTP

• Copy a file from webserver to device via HTTPS

• Copy a file from device to webserver via HTTP

Note	Copying a file from device to webserver via HTTP is not supported. Copying a file from sys-admin via HTTP(s) is not supported.

The syntax is as follows:

copyhttps://username: password@ ip-address: port target-device [location {node-id | all}]

Example:

Router# copy http://1.1.1.1/images/software.pie disk1:

Router# copy http://user:cisco@1.1.1.1/images/software.pie disk1:

UserID: user
Password: cisco

Router# copy http://user:cisco@1.1.1.1:45/images/software.pie disk1:


UserID: user
Password: cisco
Specific listen port: 45

Copying to the Running Configuration

When you use the copy command to copy a configuration file to the running-config destination, the configuration in the file is applied to the running configuration of the system. This is a configuration operation. By default, the copy is carried out in a best-effort manner. This means that if some configuration lines from the file cannot be applied, the remaining configuration is still integrated into the system. In this case, a partial configuration is committed. When the atomic keyword is used, partial configurations are not committed. This means that even if one error occurs in the parsing or committing phase, no changes are made to the system. To view any errors when applying the configuration, use the show configuration failed command.

To delete files, use delete command in the appropriate mode.

To display a list of files on a file system or in a specific directory, use the dir command in XR EXEC mode .

To create a new directory on a file system, use the mkdir command in the appropriate mode.

To display the present working directory, use the pwd command in

EXEC mode

System Admin EXEC

To remove an existing directory, use the rmdir command in the appropriate mode.

To display the layout and contents of file systems, use the show filesystem command in XR EXEC mode

System Admin EXEC