Examples

The following example shows the output for the last port on a 324 universal port card.

Router# show vdev 2/323
flags = 0x0000
dev_status = 0x0000
service = 0x0000
service_type = 0x0
min_speed = 0, max_speed = 0
modulation = 0, err_correction = 0, compression = 0
csm_call_info = 0x0, csm_session = Invalid
vdev_p set to modem_info
DSPLIB information:
dsplib_state = 0x0
dsplib_next_action = 0x0
HDLC information:
call_id = 0x0
called_number = 
speed = 0
ces = 0x0
spc = FALSE
d_idb = 0x0
Bulk sync reference = 2, Global bulk syncs = 2

The table below displays significant fields shown in the output.

Examples

The following is sample output from this command showing that the card in slot 1 is a C549 DSPM:

Router# show vfc 1 technology
Technology in VFC slot 1 is C549

Field descriptions should be self-explanatory.

Examples

The following is sample output from this command:

Router# show vfc 1 cap-list
Capability List for VFC in slot 1:
1. fax-vfc-l.0.1.bin
2. bas-vfc-l.0.1.bin
3. cdc-g729-l.0.1.bin
4. cdc-g711-l.0.1.bin
5. cdc-g726-l.0.1.bin
6. cdc-g728-l.0.1.bin
7. cdc-gsmfr-l.0.1.bin

The first line in this output is a general description, stating that this is the capability list for the VFC residing in slot 1. Below this is a numbered list, each line of which identifies one currently installed in-service file.

Examples

The following is sample output from this command:

Router# show vfc 1 default-file
Default List for VFC in slot 1:
1. btl-vfc-l.0.13.0.bin
2. cor-vfc-l.0.1.bin
3. bas-vfc-l.0.1.bin
4. cdc-g729-l.0.1.bin
5. fax-vfc-l.0.1.bin
6. jbc-vfc-l.0.13.0.bin

The first line in this output is a general description, stating that this is the default list for the VFC residing in slot 1. Below this is a numbered list, each line of which identifies one default file.

Examples

The following is sample output from this command:

Router# show vfc 1 directory
Files in slot 1  VFC flash:
     File Name                        Size (Bytes)
1 .  vcw-vfc-mz.gsm.VCW               292628
2 .  btl-vfc-l.0.13.0.bin             4174
3 .  cor-vfc-l.0.1.bin                54560
4 .  jbc-vfc-l.0.13.0.bin             16760
5 .  fax-vfc-l.0.1.bin                64290
6 .  bas-vfc-l.0.1.bin                54452
7 .  cdc-g711-l.0.1.bin               190
8 .  cdc-g729-l.0.1.bin               21002
9 .  cdc-g726-l.0.1.bin               190
10.  cdc-g728-l.0.1.bin               22270
11.  cdc-gsmfr-l.0.1.bin              190

The table below describes significant fields in this output.

Examples

The following is sample output from this command:

Router# show vfc 0 version dspware
Version of Dspware in VFC slot 0 is 0.10

The output from this command is a simple declarative sentence stating the version number for the selected type of software (in this example, DSPWare) for the VFC residing in the selected slot number (in this example, slot 0).

Cisco IOS Release 12.2(13)T adds new information to the output of the show vfc slot version vcware and show vfc slot version dspware commands. Messages are output if the Cisco VCWare or DSPWare is not compatible with the Cisco IOS image. The new information is advisory only, so there is no action taken if the software is compatible or incompatible.

If the versions detected fall within the defined criteria and are compatible, nothing is output at bootup time. A confirmation line is output when the show vfc version vcware and show vfc version dspware commands are used:

Router# show vfc 1 version vcware
Voice Feature Card in Slot 1:
VCWare Version     : 7.35
ROM Monitor Version: 1.3
     DSPWare Version    : 3.4.46L
     Technology         : C549
VCWare/DSPWare version compatibility OK

The table below shows output field descriptions for the show vfc version vcware command with compatible firmware.

The following is sample outpou from this command.

Router# show vfc 1 version dspware
DSPWare version in VFC slot 1 is 3.4.46L
VCWare/DSPWare version compatibility OK

The table below shows output field descriptions for the show vfc version dspware command with compatible firmware.

If the found versions are out of range or otherwise mismatched, a representative message is output when you boot up the router or is appended to the output of the show vfc version vcware and show vfc version dspware commands. Other than the output of these messages, the version check has no other effect, and the software functions normally. The following is an example of when a found version is out of range or mismatched at bootup :

... 
Firmware version mismatch for bundle AS5300 VCWare 
  - 	version found (6.04) is lower than minimum required (7.35)
Firmware version mismatch for bundle AS5300 C549 
  - version found (3.3.10L) is lower than minimum required (3.4.46L)

If you were to enter an explicit request, and the software were incompatible, the following output would be displayed :

Router# show vfc 1 version vcware
Voice Feature Card in Slot 1:
VCWare Version     : 6.04
ROM Monitor Version: 1.3
     DSPWare Version    : 3.3.10L
     Technology         : C549
Firmware version mismatch for bundle AS5300 VCWare 
  - version found (6.04) is lower than minimum required (7.14) 
Firmware version mismatch for bundle AS5300 C549 
  - version found (3.3.10L) is lower than minimum required (3.4.26L)
Router# show vfc 1 version dspware
DSPWare version in VFC slot 1 is 3.3.10L
Firmware version mismatch for bundle AS5300 VCWare 
  - version found (6.04) is lower than minimum required (7.14)
Firmware version mismatch for bundle AS5300 C549 
  - version found (3.3.10L) is lower than minimum required (3.4.26L)

Examples

The following example displays information about the ViCM when no call is in progress on the serial interface that connects to the local video codec:

Router# show video call summary
Serial0:ViCM = 
Idle, Codec Ready

The following output shows a call starting:

Router# show video call summary
Serial0:ViCM = Call Connected

The following output shows a call disconnecting:

Router# show video call summary
Serial0:ViCM = Idle

Examples

The following is sample output from the show voice accounting method command for a specific method list:

Router# show voice accounting method ml1
Accounting Method List [ml1]
====================== 
Current Status:
---------------
unreachable                [21:52:39 gmt Dec 4 2002]
last record sent time      [23:14:59 gmt Dec 4 2002]
total probe sent out       [84]
Status History:
---------------
(2) unreachable            [21:52:39 gmt Dec 4 2002]
(1) reachable              [21:46:19 gmt Dec 4 2002]
                 SUCCESS                        FAILURE
Record  [Received   | Notified ] [Received   |  Notified  | Reported ]
Type    [from server| to client] [from server|  to client | to call  ]
------  [-----------|----------] [-----------|------------|----------]
START   [     0     |     0    ] [     0     |      0     |     0    ]
UPDATE  [     0     |     0    ] [     0     |      0     |     0    ]
STOP    [     0     |     0    ] [     84    |      84    |     0    ]
ACCT_ON [     0     |     0    ] [     0     |      0     |     0    ]
------  [-----------|----------] [-----------|------------|----------]
TOTAL   [     0     |     0    ] [     84    |      84    |     0    ]

If there is no status history, as in the following example, no status history is displayed.

Router# show voice accounting method
Accounting Method List [ml1]
====================== 
Current Status:
---------------
reachable                  [21:52:39 gmt Dec 4 2002]
last record sent time      [23:14:59 gmt Dec 4 2002]
total probe sent out       [2]
                 SUCCESS                        FAILURE
Record  [Received   | Notified ] [Received   |  Notified  | Reported ]
Type    [from server| to client] [from server|  to client | to call  ]
------  [-----------|----------] [-----------|------------|----------]
START   [     0     |     0    ] [     0     |      0     |     0    ]
UPDATE  [     0     |     0    ] [     0     |      0     |     0    ]
STOP    [     0     |     0    ] [     2     |      2     |     0    ]
ACCT_ON [     0     |     0    ] [     0     |      0     |     0    ]
------  [-----------|----------] [-----------|------------|----------]
TOTAL   [     0     |     0    ] [     2     |      2     |     0    ]

The table below describes the significant fields shown in the display.

Examples

The following example displays information regarding pending VoIP AAA accounting responses:

Router# show voice accounting response pending
Total num of acct sessions waiting for acct responses: 0
Total num of acct start responses pending:             0
Total num of acct interim update responses pending:     0
Total num of acct stop responses pending:              0

The table below lists and describes the significant output fields.

Examples

The following is sample output from this command:

Router# show voice busyout
If following network interfaces are down, voice port will be put into busyout state
ATM0
Serial0
The following voice ports are in busyout state
1/1     	is forced into busyout state
1/2     	is in busyout state caused by network interfaces
1/3     	is in busyout state caused by ATM0
1/4     	is in busyout state caused by network interfaces
1/5     	is in busyout state caused by Serial0

Field descriptions should be self-explanatory.

Examples

The following is sample output from the show voice cable-status all command:

Device# show voice cable-status all

Warning:This may take time to perform and cause call disruption!

PORT         cable-status
========== ================
0/2/0        cable-detect not configured
0/2/1        connected
0/2/2        connected
0/2/3        busy out
0/3/0        administrative down
0/3/1        in busy state
0/3/2        connected
0/3/3        connected
1/0/16       not connected    

Examples

The following is sample output from the show voice call summary command showing two local calls connected without local bypass:

Router# show voice call summary
PORT    CODEC    VAD VTSP STATE            VPM STATE
======= ======== === ===================== ========================
0:17.18                                     *shutdown*
0:18.19 g729ar8   n  S_CONNECT             FXOLS_OFFHOOK
0:19.20                                    FXOLS_ONHOOK
0:20.21                                    FXOLS_ONHOOK
0:21.22                                    FXOLS_ONHOOK
0:22.23                                    FXOLS_ONHOOK
0:23.24                                    EM_ONHOOK
1/1                                        FXSLS_ONHOOK
1/2                                        FXSLS_ONHOOK
1/3                                        EM_ONHOOK
1/4                                        EM_ONHOOK
1/5                                        FXOLS_ONHOOK
1/6     g729ar8   n  S_CONNECT             FXOLS_CONNECT

The following is sample output from the show voice call summary command showing two local calls connected with local bypass:

Router# show voice call summary
PORT    CODEC    VAD VTSP STATE            VPM STATE
======= ======== === ===================== ========================
0:17.18                                     *shutdown*
0:18.19              S_CONNECT             FXOLS_OFFHOOK
0:19.20                                    FXOLS_ONHOOK
0:20.21                                    FXOLS_ONHOOK
0:21.22                                    FXOLS_ONHOOK
0:22.23                                    FXOLS_ONHOOK
0:23.24                                    EM_ONHOOK
1/1                                        FXSLS_ONHOOK
1/2                                        FXSLS_ONHOOK
1/3                                        EM_ONHOOK
1/4                                        EM_ONHOOK
1/5                                        FXOLS_ONHOOK
1/6                  S_CONNECT             FXOLS_CONNECT

The following is sample output from the show voice call summary command in which the connected FXO port 0/2/0 shows status of "FXOLS_ONHOOK" whereas the FXO port 0/2/1, which is disconnected, shows a status of "FXOLS_BUSYOUT":

Router# show voice call summary
PORT           CODEC     VAD VTSP STATE            VPM STATE
============== ========= === ==================== ======================
0/0/0         -          -  -                     FXSLS_ONHOOK             
0/0/1         -          -  -                     FXSLS_ONHOOK             
0/3/0:23.1      -          -  -                     
0/3/0:23.2      -          -  -                     
.
.
.
0/3/0:23.23     -          -  -                     
0/1/0         -          -  -                     DID_ONHOOK               
0/1/1         -          -  -                     DID_ONHOOK               
0/2/0         -          -  -                     FXOLS_ONHOOK             
0/2/1         -          -  -                     FXOLS_BUSYOUT            
2/0/0         -          -  -                     FXSLS_ONHOOK             
2/0/1         -          -  -                     FXSLS_ONHOOK             
2/0/2         -          -  -                     FXSLS_ONHOOK             
2/0/3         -          -  -                     FXSLS_ONHOOK             
2/0/4         -          -  -                     FXSLS_ONHOOK             
2/0/5         -          -  -                     FXSLS_ONHOOK             
2/0/6         -          -  -                     FXSLS_ONHOOK             
2/0/7         -          -  -                     FXSLS_ONHOOK 

Note

Beginning in Cisco IOS Release 15.1(3)T, there is improved status monitoring of FXO ports--any time an FXO port is connected or disconnected, a message is displayed to indicate the status change. For example, the following message is displayed to report that a cable has been connected, and the status is changed to "up" for FXO port 0/2/0: 000118: Jul 14 18:06:05.122 EST: %LINK-3-UPDOWN: Interface Foreign Exchange Office 0/2/0, changed state to operational status up due to cable reconnection

The following is sample output from the show voice call summary command showing one regular PRI port and one NFAS PRI port on a Cisco AS5350, Cisco AS5400, or Cisco AS5850 platform. Port 3/2:D belongs to a regular PRI voice port with time slots 0 and 22. Port Se3/1 belongs to an NFAS PRI voice port with time slots 0,1, and 2 on T1 controller 3/1, which is a member of an NFAS group.

In the case of NFAS on Cisco AS5350, Cisco AS5400, and Cisco AS5850 platforms, the port is reported in terms of the serial interface associated with the T1 controller, and the time slot is counted from 0 (for example, 0, 1, 2, 3).

Router# show voice call summary
PORT           CODEC    VAD VTSP STATE            VPM STATE
============== ======== === ==================== ======================
3/2:D.0        None      y  S_ALERTING            S_TSP_INCALL
3/2:D.22       None      y  S_ALERTING            S_TSP_INCALL
Se3/1:0        None      y  S_CONNECT             S_TSP_CONNECT
Se3/1:1        None      y  S_CONNECT             S_TSP_CONNECT
Se3/1:2        None      y  S_CONNECT             S_TSP_CONNECT

Note

The output from the show voice call summary command is slightly different in the PORT field on platforms other than the Cisco AS5350, Cisco AS5400, and Cisco AS5850. The contrast between platform types is as follows: Platform Regular PRI (T1) NFAS PRI (T1)* -------------------------------------------------------------- non-AS5xxx 3/0:23.TS 3/1:23.TS AS5xxx 3/0:D.TS Ser3/1:(TS-1) * Assumes T1 3/1 is a member of an NFAS group with T1 3/0 as the primary NFAS member, and TS is the time slot counted from a base of 1 (for example 1, 2, 3).

The following is sample output from the show voice call command for analog voice ports:

Router# show voice call
1/1 vpm level 1 state = FXSLS_ONHOOK
vpm level 0 state = S_UP
1/2 vpm level 1 state = FXSLS_ONHOOK
vpm level 0 state = S_UP
1/3 is shutdown
1/4 vtsp level 0 state = S_CONNECT
vpm level 1 state = S_TRUNKED
vpm level 0 state = S_UP
1/5 vpm level 1 state = EM_ONHOOK
vpm level 0 state = S_UP
1/6 vpm level 1 state = EM_ONHOOK
vpm level 0 state = S_UP
Router# show voice call 1/4
1/4 vtsp level 0 state = S_CONNECT
vpm level 1 state = S_TRUNKED
vpm level 0 state = S_UP
router#			***DSP VOICE VP_DELAY STATISTICS***
Clk Offset(ms): 1445779863, Rx Delay Est(ms): 95
Rx Delay Lo Water Mark(ms): 95, Rx Delay Hi Water Mark(ms): 125
		***DSP VOICE VP_ERROR STATISTICS***
Predict Conceal(ms): 10, Interpolate Conceal(ms): 0
Silence Conceal(ms): 0, Retroact Mem Update(ms): 0
Buf Overflow Discard(ms): 20, Talkspurt Endpoint Detect Err: 0
		***DSP VOICE RX STATISTICS***
Rx Vox/Fax Pkts: 537, Rx Signal Pkts: 0, Rx Comfort Pkts: 0
Rx Dur(ms): 50304730, Rx Vox Dur(ms): 16090, Rx Fax Dur(ms): 0
Rx Non-seq Pkts: 0, Rx Bad Hdr Pkts: 0
Rx Early Pkts: 0, Rx Late Pkts: 0
		***DSP VOICE TX STATISTICS***
Tx Vox/Fax Pkts: 567, Tx Sig Pkts: 0, Tx Comfort Pkts: 0
Tx Dur(ms): 50304730, Tx Vox Dur(ms): 17010, Tx Fax Dur(ms): 0
		***DSP VOICE ERROR STATISTICS***
Rx Pkt Drops(Invalid Header): 0, Tx Pkt Drops(HPI SAM Overflow): 0
		***DSP LEVELS***
TDM Bus Levels(dBm0): Rx -70.3 from PBX/Phone, Tx -68.0 to PBX/Phone
TDM ACOM Levels(dBm0): +2.0, TDM ERL Level(dBm0): +5.6
TDM Bgd Levels(dBm0): -71.4, with activity being voice

The following is sample output from the show voice call command for analog voice ports on a Cisco 7200 series. The output includes the DSPfarm, T1 interface, and DS0 or TLM slot configuration:

Router# show voice call 6/0:0
6/0:0 1 -         -  -                     vpm level 1 state = FXOGS_ONHOOK 
vpm level 0 state = S_UP
6/0:0 2 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 3 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 4 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 5 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 6 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 7 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 8 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 9 -         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 10-         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 11-         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP
6/0:0 12-         -  -                     vpm level 1 state = FXOGS_ONHOOK
vpm level 0 state = S_UP

The following is sample output from the show voice call status command on the Cisco 2600 series. You can use this command rather than the show call active brief command to obtain the caller ID; the caller ID output of the show voice call status command is already in hexadecimal form.

Router# show voice call status
CallID     CID  ccVdb      Port      DSP/Ch  Called #   Codec    Dial-peers
0x1        11CE 0x02407B20 1:0.1     1/1     1000       g711ulaw 2000/1000
1 active call found

Using the call-id argument is a generic means to identify active calls. If the call-id is omitted, the query shows all active voice calls. In the following example, a list of all active calls with relevant identifying information is shown:

Router# show voice call status
CallID    CID    ccVdb       Port     DSP/Ch  Called #   Codec    Dial-peers
0x3       11D4   0x62972834  1/0/0    1/1     10001      g711ulaw 1/2
0x4       11D4   0x62973AD0  1/0/1    2/1    *10001      g711ulaw 2/1
0xA       11DB   0x62FE9D68  1/1/0    3/1    *2692       g729r8   0/2692
2 active calls found

Note

You can query only one call at a time. If you attempt queries from different ports (console and Telnet ), and if a query is in progress on another port, the system asks you to wait for completion of that query. You can query any call from anywhere, at anytime, except during the sample interval for an enquiry that is already in progress. This simplifies the implementation significantly and does not reduce the usefulness of the command.

The following example shows echo-return-loss (ERL) reflector information where the call ID is 3 and the sample period is 10 seconds:

Router# show voice call status 3 sample 10
Gathering information (10 seconds)...
CallID    Port     DSP/Ch  Codec    Rx/Tx     ERL         Jitter
0x3       1/0/0    1/1     g711ulaw 742/154   5.6         50/15

In this example, ERL is the echo return loss (in dB) as reported by the DSP. Jitter values are the current delay and the jitter of the packets around that delay.

If the router is running the extended echo canceller, output looks similar to the following if you enter the same command. The output shows a new value under ERL/Reflctr: the time difference, in ms, between the original signal and the loudest echo (peak reflector) as detected by the echo canceller:

Router# show voice call status 3 sample 10
Gathering information (10 seconds)...
CallID    Port     DSP/Ch  Codec    Rx/Tx     ERL/Reflctr Jitter
0x3       1/0/0    1/1     g711ulaw 742/154   5.6/12      50/15

The following examples show output using the NextPort version of the standard echo canceller. ( Time-slot information is also in the output for digital ports.)

Router# show voice call status
CallID     CID  ccVdb      Port      DSP/Ch  Called #   Codec    Dial-peers
0x97       12BB 0x641B0F68 3/0:D.1   1012/2  31001      g711ulaw 3/31000
0x99       12BE 0x641B0F68 3/0:D.2   1012/3  31002      g711ulaw 3/31000
2 active calls found
Router# show voice call status
CallID     CID  ccVdb       Port     DSP/Ch  Called #   Codec    Dial-peers
0x2        11D1 0x62FE6478 1/0/0     1/1     10001      g711ulaw 1/2
0x3        11D1 0x62FE80F0 1/0/1     2/1    *10001      g711ulaw 2/1
1 active call found

When using the test call id command, you must specify a call ID, which you can obtain by using the show voice call status command. The following is an example of how to obtain the call ID for use as the call-id argument. The first parameter displayed in the output is the call ID.

Note	Do not use the 0x prefix in the call-id argument when you enter the resulting call ID in the test call status command .

The following shows keyword choices when using the show voice call command with the | (pipe) option:

Router# show voice call | ?  
  append    Append redirected output to URL (URLs supporting append operation
            only)
  begin     Begin with the line that matches
  exclude   Exclude lines that match
  include   Include lines that match
  redirect  Redirect output to a URL
  tee       Copy output to a URL

The table below describes significant fields shown in the previous displays.

For more information about the extended echo canceller, see Extended ITU-T G.168 Echo Cancellation .

Examples

The following is sample output from the show voice call rate command. In the output, x-axis measures time in seconds (1 unit = 1 second) and y-axis measures call legs per second (cps) (1 unit = 1 cps):

Router# show voice call rate
 
3845-1   04:35:57 AM Wednesday Sep 7 2011 UTC
          122                    11
          5009          2        40      42    64
  100
   90
   80
   70
   60
   50
   40
   30
   20    ***
   10    ****                      **              *
     0....5....1....1....2....2....3....3....4....4....5....5....6
                  0    5    0    5    0    5    0    5    0    5    0
          VoIP Call switching rate per second (last 60 seconds)
          # = calls entering the module per second 

The following is sample output from the show voice call rate table command:

Router# show voice call rate table

3845-1   04:35:57 AM Wednesday Sep 7 2011 UTC
          Voice Call switching rate per second (last 60 seconds)
Period     Actual     Average
--------------------------------------
 1-5            0          0
 6-10         64         13
11-15          0          0
16-20          0          0
21-25          2          0
26-30          0          0
31-35         24          5
36-40          0          0
41-45          6          1
46-50         10          2
51-55          0          0
56-60          0          0

The following table describes the significant fields shown in the display.

Examples

The following example displays Q.850 cause code mapping:

Router# show voice cause-code category-q850
The Internal Error Category to Q850 cause code mapping table:-
 Error Configured Default    Description
Category  Q850     Q850
   128     27        3  Destination address resolution failure                 
   129     38      102  Call setup timeout                                     
   178     41       41  Internal Communication Error                           
   179     41       41  External communication Error                           
   180     47       47  Software Error                                         
   181     47       47  Software Resources Unavailable                         
   182     47       47  Hardware Resources Unavailable                         
   183     41       41  Capability Exchange Failure                            
   184     49       49  QoS Error                                              
   185     41       41  RTP/RTCP receive timer expired or bearer layer failure 
   186     38       38  Signaling socket failure                               
   187     38       38  Gateway or signaling interface taken out of service   
   228     50       50  User is denied access to this service                  
   278     65       65  Media Negotiation Failure due to non-existing Codec 

The table below describes the significant fields shown in the display.

Examples

The following is sample output from this command:

Router# show voice class called-number outbound 200
Called Number Outbound: 200
           index 1      4085550100
           index 2      4085550102
           index 3      4085550103
           index 4      4085550104

The table below describes significant fields shown in the display.

Examples

The following sample output displays configuration information for voice class called-number-pool 100, including idle called numbers and allocated called numbers:

Router(config)# show voice class called-number-pool 100 detail
Called Number Pool: 100
index 1 100A11 - 100A20
index 2 200#55 - 200#77
index 3 5551111 - 6662333
index 99 123C11 - 123C99
All called numbers are generated from table: FALSE
No of idle called numbers: 16
List of idle called numbers:
100A11 100A12 .. Display up to 16 idle called number from the pool
100A13 100A14
100A15 100A16
100A17 100A18
100A19 100A20
200#55 200#56
200#57 200#58
200#59 200#60
No of alloc requests : 1
Ref Id Alloc PC Size
2 41F84190 16
List of alloc called numbers: .. Display the first 4 allocated called number for RefId 2
200#61 200#62
200#63 200#64

The table below describes significant fields shown in the display.

Examples

The following is sample output from the show voice class e164-pattern map command:

Device# show voice class e164-pattern-map summary

e164-pattern-map 1
-----------------------------------------
It has 100 entries
It is populated from url http://http-host/config-files/destination-pattern-map.cfg

e164-pattern-map 2
-----------------------------------------
It has 23 entries

e164-pattern-map 3
-----------------------------------------
Loading failed on url http://http-host/config-files/destination-pattern-map-1.cfg

e164-pattern-map 4
-----------------------------------------
Parsing error on patterns: “123gh” “1*g”
It is populated from url http://http-host/config-files/destination-pattern-map-2.cfg
      

Examples

The following example displays the E.164 translation table. The incoming call numbers +41993000000 and +41993000001 are translated, and replaced by +418893000000 and +418893000001 respectively.

Router#show voice class e164-translation
Voice class e164-translation: 1         AdminStat: Up
 Description:
 URL: ftp://test:test123@8.0.0.200/test_e164.cfg
      (Loaded:TRUE Valid: TRUE)

 Duplicate error count:    0
 Syntax error count:    0
 Error count:    0

 Total Translation Rules: 2

 Rule#  Match Call Number                 Replace Call Number
 -----  -----------------                 -------------------
 1      +41993000000                      +418893000000
 2      +41993000001                      +418893000001

 Total Rules from Internal Sorted list: 2

 Match Reverse Call Number         Match Call Number
 -------------------------         -----------------
 00000039914+                      +41993000000
 10000039914+                      +41993000001


 Lookup Array Setup:

 Offset  Match Reverse Number              Match Call Number
 ------  -------------------               -----------------
 12      00000039914+                      +41993000000

Examples

The following is sample output from the show voice class resource-group command:

Router> enable
Router# show voice class resource-group 2
Resource Availability Indicator status 
Resource Index 2
Resource Type:SYSTEM
         Status: Low threshold
Resource Type: MEM Subtype: io-mem Low/High watermark: 2/5
         Status: Low threshold
Report Interval 34
------------------------------------------------------------

The table below describes the significant fields shown in the display.

Examples

The following sample output displays the details of the server group and the OOD Keepalive Profiles defined on the server group.

Router# show voice class sip-options-keepalive global
Server Group: 1
  List of OOD Keepalive Profile(s):
        171
----------------------------------------------------

Examples

The following sample output displays detailed information about all predefined SIP profiles:

Router# show voice class sip-predefined-profiles
voice class sip-hdr-passthrulist 20001
passthru-hdr Call-Info
passthru-hdr Content-ID
passthru-hdr Allow-Events
passthru-hdr Supported
passthru-hdr Remote-Party-I
passthru-hdr Require
passthru-hdr Referred-By
      
voice class sip-profiles 20001
  request INVITE sip-header Cisco-Guid remove

Examples

The following is sample output from this command:

Router# show voice class uri
Voice URI class: 100
     SNMP status = Active
     Schema = sip
     pattern = 12345
Voice URI class: 101
     SNMP status = Active
     Schema = sip
     pattern = 555....
Voice URI class: 102
     SNMP status = Active
     Schema = sip
     user-id = demo
     host = cisco
     phone context = 
Voice URI class: 103
    SNMP status = Active
    Schema = tel
    phone number = 555....
    phone context = 
Voice URI class: 700
     SNMP status = Active
     Schema = sip
     pattern = elmo@sip.tgw.com*
Voice URI class: 104
     SNMP status = Active
     Schema = tel
     pattern = 5550134
Voice URI class: 700
     SNMP status = Active
     Schema = sip
     user-id = 
     host = exmp.example.com
     phone context = 
     
     host instances:
      ipv4:192.168.0.1
      ipv6:[2001:0DB8:0:1:FFFF:1234::5]
      dns:ogw.example.com

The following is sample output from this command with the summary keyword:

Router# show voice class uri summary
_____________________________________________________________
Class Name                       Schema     SNMP
-------------------------------------------------------------
100                              sip       Active
101                              sip       Active
102                              sip       Active
103                              tel       Active
700                              sip       Active
104                              tel       Active
_____________________________________________________________

The table below describes the significant fields in the displays.

Examples

The following example shows how the show voice connectivity summary command is used:

Router> enable
Router# show voice connectivity summary
.
.
.
! The summary results include information such as the port address, type of connectivity
! check performed, result of connectivity check for each port

Examples

The following is sample output from the show voice data command:

Router# show voice data ccapi ccCallEntry all
CallEntry=0x6B8051B0; CallID=7(0x7)::
element:{ 0x6B8051B0; 0x6B8051B4; 0x6B8051B8; } 7; <appReturnStack>; 1735408; 1; 0x6B8051D8; 7; 8; callInfo:{ 0; 112233; <NULL>; 889988; <NULL>; <NULL>; <NULL>; <NULL>; <NULL>; <NULL>; <NULL>; FALSE; FALSE; TRUE; <NULL>; 0; 0; 0; <NULL>; RegularLine; Unknown; D356CC33-E54B-11D7-8005-00169D6EE1AE; D356CC33-E54B-11D7-8005-00169D6EE1AE; 0; 0; 0; 0; 0; 998877; 0x6B80547C; 0; TRUE; FALSE; 0.0.0.0; 0.0.0.0; 0x6B8054A0; 0x6B8054A4; 0x6B8054A8; 0x6B8054AC; 0; FALSE; FALSE; 0x6B8054BC; 0; call_decode:{ redirect_info:{ 0xFF; 0xFF; 0xFF; 0xFF; 0xFF; 0xFF; 0x00; 0xFF; 255; <NULL>; <NULL>; 0x00; FALSE; FALSE; } 0x00; 0x80; 0x00; 0x80; 0; 0x00; <NULL>; 0; 0x00; <NULL>; FALSE; FALSE; FALSE; FALSE; -1; <NULL>; TRUE; <transfer_info>; FALSE; 129; 40; 104; 0xFF; TRUE; } FALSE; D357685B-E54B-11D7-8016-CB962D72A90A; 0; 0; 0; 0; 0; 0; 0x6B805634; FALSE; <NULL>; FALSE; FALSE; FALSE; 0; 0; 0; <NULL>; ISDN 7/0:1:D; FALSE; FALSE; FALSE; 0x00; <NULL>; <NULL>; 0x6B80585C; 0; 0x6B805864; } 0x6B805914; 0x6B805918; 0x6B80591C; 0x6B805920; <altAssocList>; FALSE; 0x6B80593C; 0x6B805940; 0x6B805944; FALSE; 0; 65535; TRUE; 0; FALSE; 1; <disconnect_timer>; <inter_digit_timer>; 10000; <initial_timer_timestamp>; 10000; FALSE; 0; 0; -1; <NULL>; 0x6B8059F8; <evCategoryMask>; <evDetailMask>; 4294967295; 0x6B805C48; FALSE; 0; 0; TRUE; TRUE; TRUE; 0; 0; 0x6B805C6C; FALSE; 0; 4; 0; -1; FALSE;
CallEntry=0x6B805C90; CallID=8(0x8)::
element:{ 0x6B805C90; 0x6B805C94; 0x6B805C98; } 8; <appReturnStack>; 1735408; 2; 0x6B805CB8; 8; 7; callInfo:{ 0; 112233; <NULL>; 889988; <NULL>; 112233; 112233; <NULL>; <NULL>; <NULL>; <NULL>; FALSE; FALSE; TRUE; <NULL>; 0; 0; 0; <NULL>; RegularLine; Unknown; D356CC33-E54B-11D7-8005-00169D6EE1AE; D356CC33-E54B-11D7-8005-00169D6EE1AE; 7; 0; 0; 0; 2; 112233; 0x6B805F5C; 0; FALSE; FALSE; 0.0.0.0; 0.0.0.0; 0x6B805F80; 0x6B805F84; 0x6B805F88; 0x6B805F8C; 0; FALSE; FALSE; 0x6B805F9C; 0; call_decode:{ redirect_info:{ 0xFF; 0xFF; 0xFF; 0xFF; 0xFF; 0xFF; 0x00; 0xFF; 255; <NULL>; <NULL>; 0x00; FALSE; FALSE; } 0x00; 0x80; 0x00; 0x00; 0; 0x00; <NULL>; 0; 0x00; <NULL>; FALSE; FALSE; FALSE; FALSE; -1; <NULL>; TRUE; <transfer_info>; FALSE; 129; 40; 104; 0xFF; TRUE; } FALSE; D357685B-E54B-11D7-8016-CB962D72A90A; 0; 0; -1; 0; 0; 0; 0x6B806114; FALSE; <NULL>; FALSE; FALSE; FALSE; 0; 0; 0; <NULL>; ISDN 7/0:1:D; TRUE; FALSE; FALSE; 0x00; <NULL>; <NULL>; 0x6B80633C; 0; 0x6B806344; } 0x6B8063F4; 0x6B8063F8; 0x6B8063FC; 0x6B806400; <altAssocList>; FALSE; 0x6B80641C; 0x6B806420; 0x6B806424; FALSE; 0; 65535; FALSE; 0; FALSE; 1; <disconnect_timer>; <inter_digit_timer>; 10000; <initial_timer_timestamp>; 10000; FALSE; 0; 0; -1; <NULL>; 0x6B8064D8; <evCategoryMask>; <evDetailMask>; 4294967295; 0x6B806728; FALSE; 0; 0; TRUE; TRUE; TRUE; 0; 0; 0x6B80674C; FALSE; 0; 4; 0; -1; FALSE;

The table below describes the significant fields shown in the display.

Examples

The following is sample output from the show voice dnis-map command:

Router# show voice dnis-map
There are 2 dnis-maps configured
Dnis-map dmap1
-----------------------------------------
  It has 3 entries
  It is not populated from a file.
DNIS                  URL
----                  ---
 4085551212           tftp://global/tickets/movies.vxml
 4085551234           tftp://global/tickets/plays.vxml
 4085554321           tftp://global/tickets/games.vxml
Dnis-map dmap4
-----------------------------------------
  It has 0 entries
  It is populated from url http://dnismaps/dnismap4.txt
DNIS                URL
----                ---

The table below describes the fields shown in this output.

The following is sample output from the show voice dnis-map summary command:

Router# show voice dnis-map summary
There are 3 dnis-maps configured
dnis-map            Entries    URL
--------            -------    ---
dmap1               3
dmap4               0        http://dnismaps/dnismap4.txt
dmap6               8

describes the fields shown in this output.

Examples

The following example shows an output of a typical DSMP session in a VoIP call. This call consists of four streams, two input streams and two output streams:

Router# show voice dsmp stream
Total number of streams in use is: 4
 
Stream information:: stream=1
Type: TDM, Direction: OUTPUT
Fax/Modem Type: voice
Xmit Function: 0x00000000
Xmit function is Enabled
Call ID: 4, Conference ID: -1
 
Session information:: session=0x658CA948 dsp_intf=0x642DDD8C dsp_name=1/9:3
 
connections=2 streams=4 (5 1 4 3 )
current state S_DSMP_VC_RUNNING current container simple_voice_container
State Transitions: timestamp (container, state) -- event -> (container, state)
367121.596 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367121.796 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367122.712 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367122.732 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367122.920 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367122.940 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367123.112 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367123.152 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367124.432 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367124.632 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367124.732 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367124.932 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367125.032 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367125.232 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367126.140 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367126.160 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367126.340 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367126.380 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367126.548 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367126.568 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
 
Session log information::
Regular Timer:
    Timer start operations:
             Timestamp    Duration(ms)        Caller
            367122.652            4000    0x6113397C
            367119.388            4000    0x6113397C
            367117.624           10000    0x6112ED88
 
    Timer stop operations:
             Timestamp    Duration(ms)        Caller
            367122.656               0    0x61133A98
            367119.392               0    0x61133A98
            367117.624               0    0x6112F060
            367117.624               0    0x6112EE24
    Number of overwritten entries: 2
          
Periodic Timer:
    Timer start operations:
    None
    Timer stop operations:
    None
Packet suppression is disabled
 
Stream information:: stream=3
Type: PACKET, Direction: OUTPUT
Fax/Modem Type: voice
Xmit Function: 0x6111D324
Xmit function is Enabled
Call ID: 3, Conference ID: 2
DSP Encap: 0x1
Codec Mask: 0x4; Codec Bytes: 20
Fax Rate Mask: 0x2; Fax Bytes: 20; T38 Disabled
VAD Mask: 0x2
 
Session information:: session=0x658CA948 dsp_intf=0x642DDD8C dsp_name=1/9:3
 
connections=2 streams=4 (5 1 4 3 )
current state S_DSMP_VC_RUNNING current container simple_voice_container
State Transitions: timestamp (container, state) -- event -> (container, state)
367128.452 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367128.652 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367129.556 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367129.588 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367129.756 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367129.796 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367129.968 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367129.988 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367131.276 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367131.472 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367131.572 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367131.772 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367131.872 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367132.072 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367132.980 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367133.000 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367133.180 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367133.220 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367133.400 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367133.420 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
 
Session log information::
Regular Timer:
    Timer start operations:
             Timestamp    Duration(ms)        Caller
            367131.020            4000    0x6113397C
            367128.316            4000    0x6113397C
            367122.652            4000    0x6113397C
            367119.388            4000    0x6113397C
    Number of overwritten entries: 1
 
    Timer stop operations:
             Timestamp    Duration(ms)        Caller
            367131.024               0    0x61133A98
            367128.320               0    0x61133A98
            367122.656               0    0x61133A98
            367119.392               0    0x61133A98
    Number of overwritten entries: 4
 
Periodic Timer:
    Timer start operations:
    None
    Timer stop operations:
    None
Packet suppression is disabled
 
Stream information:: stream=4
Type: PACKET, Direction: INPUT
Fax/Modem Type: voice
Xmit Function: 0x61F2CA34
Xmit function is Enabled
Call ID: 3, Conference ID: 2
DSP Encap: 0x1
Codec Mask: 0x4; Codec Bytes: 20
Fax Rate Mask: 0x2; Fax Bytes: 20; T38 Disabled
VAD Mask: 0x2
 
Session information:: session=0x658CA948 dsp_intf=0x642DDD8C dsp_name=1/9:3
 
connections=2 streams=4 (5 1 4 3 )
current state S_DSMP_VC_RUNNING current container simple_voice_container
State Transitions: timestamp (container, state) -- event -> (container, state)
367133.400 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367133.420 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367134.692 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367134.892 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367134.992 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367135.192 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367135.292 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367135.492 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367136.400 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367136.432 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367136.600 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367136.640 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367136.812 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367136.840 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.112 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.312 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.412 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.612 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.712 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.912 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
 
Session log information::
Regular Timer:
    Timer start operations:
             Timestamp    Duration(ms)        Caller
            367137.648            4000    0x6113397C
            367134.440            4000    0x6113397C
            367131.020            4000    0x6113397C
            367128.316            4000    0x6113397C
    Number of overwritten entries: 3
 
    Timer stop operations:
             Timestamp    Duration(ms)        Caller
            367137.648               0    0x61133A98
            367134.440               0    0x61133A98
            367131.024               0    0x61133A98
            367128.320               0    0x61133A98
    Number of overwritten entries: 6
          
Periodic Timer:
    Timer start operations:
    None
    Timer stop operations:
    None
Packet suppression is disabled
 
Stream information:: stream=5
Type: TDM, Direction: INPUT
Fax/Modem Type: voice
Xmit Function: 0x00000000
Xmit function is Enabled
Call ID: 4, Conference ID: -1
 
Session information:: session=0x658CA948 dsp_intf=0x642DDD8C dsp_name=1/9:3
 
connections=2 streams=4 (5 1 4 3 )
current state S_DSMP_VC_RUNNING current container simple_voice_container
State Transitions: timestamp (container, state) -- event -> (container, state)
367138.712 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367138.912 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367139.824 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367139.844 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367140.024 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367140.064 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367140.244 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367140.252 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367141.536 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367141.736 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367141.836 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367142.036 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367142.136 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367142.336 (simple_voice_container, S_DSMP_VC_RUNNING) -- E_DSMP_CC_PLAY_REQ -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367143.244 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367143.264 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367143.444 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367143.484 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367143.652 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_BEGIN -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
367143.672 (simple_voice_container, CNFSM_CONTAINER_STATE) -- E_DSMP_DSP_DTMF_DIGIT_END -> (simple_voice_container, CNFSM_NO_STATE_CHANGE)
 
Session log information::
Regular Timer:
    Timer start operations:
             Timestamp    Duration(ms)        Caller
            367137.648            4000    0x6113397C
            367134.440            4000    0x6113397C
            367131.020            4000    0x6113397C
            367128.316            4000    0x6113397C
    Number of overwritten entries: 3
          
    Timer stop operations:
             Timestamp    Duration(ms)        Caller
            367137.648               0    0x61133A98
            367134.440               0    0x61133A98
            367131.024               0    0x61133A98
            367128.320               0    0x61133A98
    Number of overwritten entries: 6
 
Periodic Timer:
    Timer start operations:
    None
    Timer stop operations:
    None
Packet suppression is disabled

The table below describes the significant fields shown in the display.

Examples

The following sample output shows how HA State : DSP_HA_STATE_PENDING1 is added. The additional command output is seen only in Cisco IOS XE Release 3.3.0S and later releases:

Router# show voice dsp group all
Show DSP group all
 
DSP groups on slot 0 bay 0:
dsp 1:
  State: UP
  HA State : DSP_HA_STATE_PENDING1
  Max signal/voice channel: 43/43
  Max credits: 645
  num_of_sig_chnls_allocated: 43
  Transcoding channels allocated: 43
  Group: FLEX_GROUP_XCODE, complexity: LOW
    Shared credits: 0, reserved credits: 645
    Transcoding channels allocated: 24
    Credits used (rounded-up): 360

Examples

The following sample output shows the current status of all the DSP voice channels:

Router# show voice dsp
DSP# 0, channel# 0 G729A BUSY
DSP# 0, channel# 1 G729A BUSY
DSP# 1, channel# 2 FAX IDLE
DSP# 1, channel# 3 FAX IDLE
DSP# 2, channel# 4 NONE BAD
DSP# 2, channel# 5 NONE BAD
DSP# 3, channel# 6 NONE BAD
DSP# 3, channel# 7 NONE BAD
DSP# 4, channel# 8 NONE BAD
DSP# 4, channel# 9 NONE BAD
DSP# 5, channel# 10 NONE BAD
DSP# 5, channel# 11 NONE BAD

Examples

The following is a sample output of this command on a Cisco 1750 router:

Router# show voice dsp
DSP#0: state IN SERVICE, 2 channels allocated
channel#0: voice port 1/0, codec G711 ulaw, state UP
channel#1: voice port 1/1, codec G711 ulaw, state UP
DSP#1: state IN SERVICE, 2 channels allocated
channel#0: voice port 2/0, codec G711 ulaw, state UP
channel#1: voice port 2/1, codec G711 ulaw, state UP
DSP#2: state RESET, 0 channels allocated

Examples

The following is a sample output command on a secure Survivable Remote Site Telephony (SRST) router with the NM-HDV network module and the TI-549 (C549) DSP installed:

Router# show voice dsp
DSP  DSP    DSPWARE  CURR     BOOT                              PAK   TX/RX
TYPE NUM CH CODEC    VERSION  STATE STATE  RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ======== === ==== ===========
C549  1  01 {medium} 4.4.3    IDLE  idle     0  0   1/0:0   1   0    9357/9775
C549  1  02 {medium} 4.4.3    IDLE  idle     0      1/0:0   2   0    0/0
C549  2  01 {medium} 4.4.3    IDLE  idle     0  0   1/0:0   3   0    0/0
C549  2  02 {medium} 4.4.3    IDLE  idle     0      1/0:0   4   0    0/0
C549  3  01 {medium} 4.4.3    IDLE  idle     0  0   1/0:0   5   0    0/13
C549  3  02 {medium} 4.4.3    IDLE  idle     0      1/0:0   6   0    0/13

Examples

The following is a sample output of this command on an H.320 network configured for video support:

Router# show voice dsp
 
DSP  DSP             DSPWARE CURR  BOOT                         PAK     TX/RX
TYPE NUM CH CODEC    VERSION STATE STATE   RST AI VOICEPORT TS ABORT  PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============ edsp 001 01 g711ulaw  0.1 IDLE  50/0/1.1 edsp 002 02 g711ulaw  0.1 IDLE  50/0/1.2 edsp 003 01 g729r8 p  0.1 IDLE  50/0/2.1 ----------------------------FLEX VOICE CARD 1 ------------------------------
                           *DSP VOICE CHANNELS*
DSP   DSP             DSPWARE CURR  BOOT                         PAK   TX/RX
TYPE  NUM CH CODEC    VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
C5510 001 05 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 06 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 07 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 08 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 09 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 10 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 11 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 12 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 13 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 14 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 15 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 001 16 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 01 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 02 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 03 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 04 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 05 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 06 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 07 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 08 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 09 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 10 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 11 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 12 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 13 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 14 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 15 None     9.0.105 idle  idle      0  0                 0          0/0
C5510 003 16 None     9.0.105 idle  idle      0  0                 0          0/0
*DSP H.320 CHANNELS*
DSP   DSP     TX/RX       DSPWARE CURR               PAK   TX/RX
TYPE  NUM CH  CODEC       VERSION STATE VOICEPORT TS ABRT PACK COUNT
===== === === =========== ======= ===== ========= == ==== ============
C5510 001 01  h320p(01)   9.0.105 busy  1/0/0:15  06 
      001 02  h320s(02)   9.0.105 busy  1/0/0:15  07 
      001 03  h320s(03)   9.0.105 busy  1/0/0:15  08 
      001 04  h320s(04)   9.0.105 busy  1/0/0:15  09 
      001 01a g711ulaw    9.0.105 busy                 0 1013663/5083
                                                                     00          
      001 01v h263 /h263  9.0.105 busy                 0 104908/30911
                                                                     4           
------------------------END OF FLEX VOICE CARD 1 ---------------------------- 

The table below describes the significant fields shown in the displays.

Examples

The following is sample output from the show voice dsp channel operational-status command on slot 3/13/1:

Router# show voice dsp channel operational-status 3/13/1
 Operational status of Slot/DSP/Channel : 3/13/1
 Servicetype  : VOICE
 Codec Type  : gsmamr-nb
 Encapsulation : RTP            
 Transmitted Packets : 346
 Transmitted Bytes : 11740
 Received Packets : 411
 Received Bytes : 11142
 Playout de-jitter mode :  None
 Playout de-jitter buffer minimum delay : 0 msec
 Playout de-jitter buffer initial delay : 0 msec
 Playout de-jitter buffer maximum delay : 0 msec
 Noise level : -5.0 
 ERLLevel : 6 
 ACOMLevel : 6 
CodecPktPeriod=20 Milliseconds
CodecFrameFormat=bandwidth-efficient
CodecCrc=Disabled
CodecModes=3,6
CodecEncodeRate=6
CodecDecodeRate=6
CodecEncodeChanges=1
CodecDecodeChanges=0
CodecCrcFails=0
CodecBadFrameQuality=0
CodecInvalidCMRs=0
CodecInvalidFrameType=0
 Voice activity detection : Enabled    
 Dtmf Relay : inband-voice
 ComfortNoisePak : 52 
 TxVoiceDuration : 11560 
 VoiceRxDuration : 3380 
 Rx OutOfSeq Paks : 0 
 Rx Late Paks : 0 
 Rx Early Paks : 0 
 Lost Packets : 0
 Playout Delay Current : 50 
 Playout Delay Min : 50 
 Playout Delay Max : 50 
 Playout Delay ClockOffset : 80 
 Playout Delay Jitter : 0 
 Error Rx Drop : 0 
 Error Tx Drop : 0 
 Error Tx Control : 0 
 Error Rx Control : 0 
 Playout Error Predictive : 0 
 Playout Error Interpolative : 0 
 Playout Error Silence : 0 
 Playout Error BufferOverFlow : 0 
 Playout Error Retroactive : 0 
 Playout Error Talkspurt : 0 

The table below describes the significant fields shown in the display.

Examples

The following example checks your configuration:

Router# show voice dsp crash-dump 
Voice DSP Crash-dump status:
    Destination file url is slot0:banjo-152-s 
    File limit is 20 
    Last DSP dump file written was 
          tftp://112.29.248.12/tester/26-152-t2 
    Next DSP dump file written will be slot0:banjo-152-s1 

The following example shows that the crash dump feature is enabled:

Router# show voice dsp crash-dump
Voice DSP Crash-dump status:
    Destination file url is
          tftp://172.29.248.12/xxtir/dspdump6.bin
    File limit is 10
    Last DSP dump file written was
          tftp://172.29.248.12/xxtir/dspdump6.bin1
    Next DSP dump file written will be
          tftp://172.29.248.12/xxtir/dspdump6.bin2
 

The following example shows that the crash dump feature is disabled:

Router# show voice dsp crash-dump
Voice DSP Crash-dump status:
    Destination file url is
          tftp://172.29.248.12/xxtir/dspdump6.bin
    File limit is 0
    Last DSP dump file written was
          tftp://172.29.248.12/xxtir/dspdump6.bin1
DSP crash dump is currently disabled
To enable DSP crash dump, set file-limit to a non-zero number

Field descriptions should be self-explanatory.

Examples

The following sample output from the show voice dsp summary command shows summary information about DSPs:

Router# show voice dsp summary
Total number of DSPs = 48
 
Codectype       Calls    Codectype       Calls    Codectype       Calls
g729r8 pre-ietf     0    g729ar8             0    g726r16             0
g726r24             0    g726r32             0    g711ulaw            0
g711alaw            1    g728                0    g723r63             0
g723r53             0    gsmfr               0    gsmefr              0
g729br8             0    g729abr8            0    g723ar63            0
g723ar53            0    g729r8              0    t38                 0
clear-channel       0    vofr cisco          0    llcc                0
g726r40             0    transparent         0    modem-relay         0
cisco               0                        0                        0
pass-through        0    gsmamr-nb           0    
 
Legend       :
======
Channel state: (s)shutdown   (a)active call (d)download pending
               (b)busiedout  (B)bad         (p)busyout pending
Call type    : (v)voice      (f)fax-relay   (_)not in use
 
Summary      :
=======
Channels     :  Total 768  In-Use    001  
Calls        :  Total 001  Voice     001  Fax  000
             :  Free  713  Disabled  000 
 
      DSP      DSP        DSP    Channel            Call            
DSP#  State    Complexity Resets State              Type
2/1   ACTIVE   FLEXI      0      ________ ________  ________ ________
2/2   ACTIVE   FLEXI      0      ________ ________  ________ ________
2/3   ACTIVE   FLEXI      0      ________ ________  ________ ________
2/4   ACTIVE   FLEXI      0      ________ ________  ________ ________
2/5   ACTIVE   FLEXI      0      ________ ________  ________ ________
2/6   ACTIVE   FLEXI      0      ________ ________  ________ _________

The table below describes the significant fields shown in the display.

Examples

The following example shows output for the show voice eddri prefix command:

prefix 4 address family decimal
advertise flag 0x27 ac 24 tc 24 capacity timer 25 sec
AC_avg 24, FD_avg 0, SD_avg 0
succ_curr 0 tot_curr 0
succ_report 0 tot_report 0
changed 0 replacement position 0
trunk group castg2 
dial peer tag 1001 

Field descriptions should be self-explanatory.

Examples

The following example displays ERL assignment by zone, device, and interfaces.

Router# show voice emergency locations
ERL ASSIGNMENT BY ZONE
DIAL-PEER   ZONE
=================
911         10

ERL ASSIGNMENT BY DEVICE AND INTERFACES
ERL         DEVICE
======================
12          dial-peer 100

Examples

The following sample output displays the rules of ENUM match table number 3:

Router# show voice enum-match-table 3
voice enum_match_table 3
rule 1 5 /^9\(1.*\)/ /+\1/ cisco
rule 2 4 /^9011\(.*\)/ /+1408\1/ arpa
rule 10 1 /^(.*)/ /\1/ e164.cisco.com

The following sample output displays the ENUM match tables in ascending order by table number:

Router# show voice enum-match-table
voice enum-match-table 3
rule 1 5 /^9\(1.*\)/ /+\1/ cisco
rule 2 4 /^9011\(.*\)/ /+1408\1/ arpa
rule 10 1 /^(.*)/ /\1/ e164.cisco.com
voice enum-match-table 5
rule 2 4 /^9011\(.*\)/ /+1408\1/ arpa
rule 10 1 /^(.*)/ /\1/ e164.cisco.com

Field descriptions should be self-explanatory.

Examples

The following sample output shows capture statistics (HPI capture and logging) and status:

Router# show voice hpi capture
HPI Capture is on and is logging to URL ftp://172.23.184.216/d:\test_data.dat1 messages sent to URL, 0 messages droppedMessage Buffer (total:inuse:free)  2134:0000:2134Buffer Memory:699952 bytes, Message size:328 bytes

Field descriptions should be self-explanatory.

Examples

The following example displays IEC descriptions:

Router# show voice iec description 1.1.180.2.21.4
IEC Version: 1
Entity: 1 (Gateway)
Category: 180 (Software error)
Subsystem: 2 (TCL IVR)
Error: 21 (Script syntax)
Diagnostic Code: 4

The table below describes significant fields shown in the display.

Examples

The following is sample output from the show voice lmr command for an E&M LMR analog voice port on a Cisco 3745 router:

Router# show voice lmr 2/0/0
2/0/0
=========
 Connection type: n/a
 Out Attenuation = 0 db, In Gain = 0 dB
 E-lead capability is inactive, polarity = normal
 M-lead capability is inactive, polarity = normal
 voice-class tone-signal test
 state = LMR_CONNECT, e-lead = off, m-lead = off
 full duplex, voice path = rx
 Terminating side of the connection
 TransmitPackets=113, TransmitBytes=2241
 ReceivePackets=113, ReceiveBytes=2241
 CoderTypeRate=g729r8
 NoiseLevel=-65, ACOMLevel=22
 OutSignalLevel=-68, InSignalLevel=-79
 RemoteIPAddress=10.5.25.40, RemoteUDPPort=17272
 Remote SignallingIPAddress=10.5.25.40, Port=15418
 Remote MediaIPAddress=10.5.25.40, Port=17272
 RoundTripDelay=2 ms
 SessionProtocol=cisco
 VAD =enabled

The following is sample output from the show voice lmr details command for an E&M LMR analog voice port on a Cisco 3745 router:

Router# show voice lmr 2/0/0 details
2/0/0
=========
 Description:
 Connection type: n/a
 Out Attenuation = 0 db, In Gain = 0 dB
 Timing hangover: 500 ms
 E-lead capability is inactive, polarity = normal
 M-lead capability is inactive, polarity = normal
 Timing hookflash-in: 480
 Timing delay-voice: 470 ms
 Music On Hold Threshold: -38 dB, Noise Threshold: -62 dB
 E&M type: 1, Operation:  2-wire
 Impedance is set to 600r Ohm
 lmr tear down timeout is set to 1800 second
 lmr PTT transmit timeout is not set
 lmr PTT receive timeout is not set
 voice-class tone-signal test
         inject tone 1 1950 3 150
         inject tone 2 2000 0 60
         inject pause 3 60
         inject tone 4 2175 3 150
         inject tone 5 1000 0 50
         inject guard-tone 6 1950 -10 
 state = LMR_CONNECT, e-lead = off, m-lead = off
 full duplex, voice path = rx
 Terminating side of the connection
 TransmitPackets=113, TransmitBytes=2241
 ReceivePackets=113, ReceiveBytes=2241
 CoderTypeRate=g729r8
 NoiseLevel=-66, ACOMLevel=22
 OutSignalLevel=-68, InSignalLevel=-79
 PeerAddress=37200
 PeerSubAddress=
 PeerId=200
 SessionTarget=
 RemoteIPAddress=10.5.25.40, RemoteUDPPort=17272
 Remote SignallingIPAddress=10.5.25.40, Port=15418
 Remote MediaIPAddress=10.5.25.40, Port=17272
 RoundTripDelay=0 ms
 SessionProtocol=cisco
 VAD =enabled
 SelectedQoS=best-effort
 ProtocolCallId=
 SessionTarget=

The table below describes the significant fields shown in the output, in the order in which they appear.

Examples

The following is sample output from the show voice pcm capture command :

Router# show voice pcm capture
PCM Capture is on and is logging to URL tftp://10.10.1.2/acphan/
50198 messages sent to URL, 0 messages dropped
Message Buffer (total:inuse:free) 200000:0:200000
Buffer Memory: 68000000 bytes, Message size: 340 bytes
      

Examples

The following is sample output from the show voice port command for an E&M analog voice port:

Router# show voice port 1/0/0
E&M Slot is 1, Sub-unit is 0, Port is 0
 Type of VoicePort is E&M
 Operation State is unknown
 Administrative State is unknown
 The Interface Down Failure Cause is 0
 Alias is NULL
 Noise Regeneration is disabled
 Non Linear Processing is disabled
 Music On Hold Threshold is Set to 0 dBm
 In Gain is Set to 0 dB
 Out Attenuation is Set to 0 dB
 Echo Cancellation is disabled
 Echo Cancel Coverage is set to 16ms
 Connection Mode is Normal
 Connection Number is not set
 Initial Time Out is set to 0 s
 Interdigit Time Out is set to 0 s
 Analog Info Follows:
 Region Tone is set for northamerica
 Currently processing none
 Maintenance Mode Set to None (not in mtc mode)
 Number of signaling protocol errors are 0
 Voice card specific Info Follows:
 Signal Type is wink-start
 Operation Type is 2-wire
 Impedance is set to 600r Ohm
 E&M Type is unknown
 Dial Type is dtmf
 In Seizure is inactive
 Out Seizure is inactive
 Digit Duration Timing is set to 0 ms
 InterDigit Duration Timing is set to 0 ms
 Pulse Rate Timing is set to 0 pulses/second
 InterDigit Pulse Duration Timing is set to 0 ms
 Clear Wait Duration Timing is set to 0 ms
 Wink Wait Duration Timing is set to 0 ms
 Wink Duration Timing is set to 0 ms
 Delay Start Timing is set to 0 ms
 Delay Duration Timing is set to 0 ms

The following is sample output from the show voice port command for an E&M digital voice port:

Router# show voice port 1/0/1
receEive and transMit Slot is 1, Sub-unit is 0, Port is 1
 Type of VoicePort is E&M
 Operation State is DORMANT
 Administrative State is UP
 No Interface Down Failure
 Description is not set
 Noise Regeneration is enabled
 Non Linear Processing is enabled
 Music On Hold Threshold is Set to -38 dBm
 In Gain is Set to 0 dB
 Out Attenuation is Set to 0 dB
 Echo Cancellation is enabled
 Echo Cancel Coverage is set to 8 ms
 Connection Mode is normal
 Connection Number is not set
 Initial Time Out is set to 10 s
 Interdigit Time Out is set to 10 s
 Region Tone is set for US

The following is sample output from the show voice port command for a foreign exchange station (FXS) analog voice port:

Router# show voice port 1/1/1
Foreign Exchange Station 1/1/1 Slot is 1, Sub-unit is 1, Port is 1
 Type of VoicePort is FXS  VIC2-2FXS
 Operation State is DORMANT
 Administrative State is UP
 The Last Interface Down Failure Cause is Administrative Shutdown
 Description is I am a FXS LoopStart port
 Noise Regeneration is enabled
 Non Linear Processing is enabled
 Non Linear Mute is disabled
 Non Linear Threshold is -21 dB
 Music On Hold Threshold is Set to -38 dBm
 In Gain is Set to 0 dB
 Out Attenuation is Set to 3 dB
 Echo Cancellation is enabled
 Echo Cancellation NLP mute is disabled
 Echo Cancellation NLP threshold is -21 dB
 Echo Cancel Coverage is set to 64 ms
 Echo Cancel worst case ERL is set to 6 dB
 Playout-delay Mode is set to adaptive
 Playout-delay Nominal is set to 60 ms
 Playout-delay Maximum is set to 250 ms
 Playout-delay Minimum mode is set to default, value 40 ms 
 Playout-delay Fax is set to 300 ms
 Connection Mode is normal
 Connection Number is not set
 Initial Time Out is set to 10 s
 Interdigit Time Out is set to 10 s
 Call Disconnect Time Out is set to 60 s
 Supervisory Disconnect Time Out is set to 750 ms
 Ringing Time Out is set to 180 s
 Wait Release Time Out is set to 30 s
 Companding Type is u-law
 Region Tone is set for US
 Analog Info Follows:
 Currently processing none
 Maintenance Mode Set to None (not in mtc mode)
 Number of signaling protocol errors are 0
 Impedance is set to 600r Ohm
 Station name None, Station number None
 Translation profile (Incoming): 
 Translation profile (Outgoing):
 lpcor (Incoming): local_group
 lpcor (Outgoing): local_group
 Voice card specific Info Follows:
 Signal Type is loopStart
 Ring Frequency is 25 Hz
 Hook Status is On Hook
 Ring Active Status is inactive
 Ring Ground Status is inactive
 Tip Ground Status is active
 Digit Duration Timing is set to 100 ms
 InterDigit Duration Timing is set to 100 ms
 Hookflash-in Timing is set to max=1000 ms, min=150 ms
 Hookflash-out Timing is set to 400 ms
 No disconnect acknowledge
 Ring Cadence is defined by CPTone Selection
 Ring Cadence are [20 40] * 100 msec
 Ringer Equivalence Number is set to 1

The following is sample output from the show voice port command for an FXO analog voice port:

Router# show voice port 1/0/1
Foreign Exchange Office 1/0/1 Slot is 1, Sub-unit is 0, Port is 1
 Type of VoicePort is FXO
 Operation State is DORMANT
 Administrative State is UP
 The Last Interface Down Failure Cause is Administrative Shutdown
 Description is I am an FXO LoopStart port
 Noise Regeneration is enabled
 Non Linear Processing is enabled
 Non Linear Mute is disabled
 Non Linear Threshold is -21 dB
 Music On Hold Threshold is Set to -38 dBm
 In Gain is Set to 0 dB
 Out Attenuation is Set to 3 dB
 Echo Cancellation is enabled
 Echo Cancellation NLP mute is disabled
 Echo Cancellation NLP threshold is -21 dB
 Echo Cancel Coverage is set to 64 ms
 Echo Cancel worst case ERL is set to 6 dB
 Playout-delay Mode is set to adaptive
 Playout-delay Nominal is set to 60 ms
 Playout-delay Maximum is set to 250 ms
 Playout-delay Minimum mode is set to default, value 40 ms 
 Playout-delay Fax is set to 300 ms
 Connection Mode is normal
 Connection Number is not set
 Initial Time Out is set to 10 s
 Interdigit Time Out is set to 10 s
 Call Disconnect Time Out is set to 60 s
 Ringing Time Out is set to 180 s
 Wait Release Time Out is set to 30 s
 Companding Type is u-law
 Region Tone is set for US
 Analog Info Follows:
 Currently processing none
 Maintenance Mode Set to None (not in mtc mode)
 Number of signaling protocol errors are 0
 Impedance is set to 600r Ohm
 Station name None, Station number None
 Translation profile (Incoming): 
 Translation profile (Outgoing): 
 Voice card specific Info Follows:
 Signal Type is loopStart 
 Battery-Reversal is enabled
 Number Of Rings is set to 1
 Supervisory Disconnect is signal
 Answer Supervision is inactive
 Hook Status is On Hook
 Ring Detect Status is inactive
 Ring Ground Status is inactive
 Tip Ground Status is inactive
 Dial Out Type is dtmf
 Digit Duration Timing is set to 100 ms
 InterDigit Duration Timing is set to 100 ms
 Pulse Rate Timing is set to 10 pulses/second
 InterDigit Pulse Duration Timing is set to 750 ms
 Percent Break of Pulse is 60 percent
 GuardOut timer is 2000 ms
 Minimum ring duration timer is 125 ms
 Hookflash-in Timing is set to 600 ms
 Hookflash-out Timing is set to 400 ms
 Supervisory Disconnect Timing (loopStart only) is set to 750 ms
 OPX Ring Wait Timing is set to 6000 ms

The following is sample output from the show voice port summary command. Note that for the connected FXO analog voice port 0/2/0, which has the ADMIN state of "up" and the OPER state of "dorm," this output shows that the IN STATUS is "idle" and the OUT STATUS is "on-hook":

Router# show voice port summary
                                           IN       OUT
PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
=============== == ============ ===== ==== ======== ======== ==
0/0/0           --  fxs-ls      up    dorm on-hook  idle     y 
0/0/1           --  fxs-ls      up    dorm on-hook  idle     y 
0/3/0:23        01  isdn-voice  up    dorm none     none     y 
0/3/0:23        02  isdn-voice  up    dorm none     none     y 
.
.
.
0/1/0           --  did-in-wnk  up    dorm idle     idle     y 
0/1/1           --  did-in-wnk  up    dorm idle     idle     y 
0/2/0           --  fxo-ls      up    dorm idle     on-hook  y 
0/2/1           --  fxo-ls      up    down idle     off-hook y 
2/0/0           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/1           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/2           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/3           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/4           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/5           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/6           --  fxs-ls      up    dorm on-hook  idle     y 
2/0/7           --  fxs-ls      up    dorm on-hook  idle     y 

Note	If the FXO port 0/2/0 is disconnected, the output of the show voice port summary command changes so that the OUT STATUS is reported as "off-hook," and the OPER state changes to "down."

The following is sample output from the show voice port command for an ISDN voice port:

Router# show voice port
ISDN 2/0:23 Slot is 2, Sub-unit is 0, Port is 23
 Type of VoicePort is ISDN-VOICE
 Operation State is DORMANT
 Administrative State is UP
 No Interface Down Failure
 Description is not set
 Noise Regeneration is enabled
 Non Linear Processing is enabled
 Non Linear Mute is disabled
 Non Linear Threshold is -21 dB
 Music On Hold Threshold is Set to -38 dBm
 In Gain is Set to 0 dB
 Out Attenuation is Set to 0 dB
 Echo Cancellation is enabled
 Echo Cancellation NLP mute is disabled
 Echo Cancellation NLP threshold is -21 dB
 Echo Cancel Coverage is set to 64 ms
 Echo Cancel worst case ERL is set to 6 dB
 Playout-delay Mode is set to adaptive
 Playout-delay Nominal is set to 60 ms
 Playout-delay Maximum is set to 250 ms
 Playout-delay Minimum mode is set to default, value 40 ms 
 Playout-delay Fax is set to 300 ms
 Connection Mode is normal
 Connection Number is not set
 Initial Time Out is set to 10 s
 Interdigit Time Out is set to 10 s
 Call Disconnect Time Out is set to 60 s
 Ringing Time Out is set to 180 s
 Wait Release Time Out is set to 30 s
 Companding Type is u-law
 Region Tone is set for US
 Station name None, Station number None
 Translation profile (Incoming): 
 Translation profile (Outgoing): 
 Voice class called number pool: 
DS0 channel specific status info:
                                      IN      OUT
    PORT       CH  SIG-TYPE    OPER STATUS   STATUS    TIP     RING
    2/0:23     01  isdn-voice  up   none     none                       
    2/0:23     02  isdn-voice  up   none     none                       
    2/0:23     03  isdn-voice  up   none     none                       
    2/0:23     04  isdn-voice  up   none     none                       
    2/0:23     05  isdn-voice  up   none     none                       
    2/0:23     06  isdn-voice  up   none     none                       
    2/0:23     07  isdn-voice  dorm none     none                       
    2/0:23     08  isdn-voice  dorm none     none                       
    2/0:23     09  isdn-voice  dorm none     none                       
    2/0:23     10  isdn-voice  dorm none     none                       
    2/0:23     11  isdn-voice  dorm none     none                       
    2/0:23     12  isdn-voice  dorm none     none                       
    2/0:23     13  isdn-voice  dorm none     none                       
    2/0:23     14  isdn-voice  dorm none     none                       
    2/0:23     15  isdn-voice  dorm none     none                       
    2/0:23     16  isdn-voice  dorm none     none                       
    2/0:23     17  isdn-voice  dorm none     none                       
    2/0:23     18  isdn-voice  dorm none     none                       
    2/0:23     19  isdn-voice  dorm none     none                       
    2/0:23     20  isdn-voice  dorm none     none                       
    2/0:23     21  isdn-voice  dorm none     none                       
    2/0:23     22  isdn-voice  dorm none     none                       
    2/0:23     23  isdn-voice  dorm none     none                       

The following is sample output from the show voice port command for the connected FXO analog voice port 0/2/0, which has the Administrative State of "UP" and the Operation State of "DORMANT":

Router# show voice port 0/2/0
Foreign Exchange Office 0/2/0 Slot is 0, Sub-unit is 2, Port is 0
 Type of VoicePort is FXO
 Operation State is DORMANT
 Administrative State is UP
 No Interface Down Failure
 Description is not set
 Noise Regeneration is enabled
 Non Linear Processing is enabled
 Non Linear Mute is disabled
 Non Linear Threshold is -21 dB
 Music On Hold Threshold is Set to -38 dBm
 In Gain is Set to 0 dB
 Out Attenuation is Set to 3 dB
 Echo Cancellation is enabled
 Echo Cancellation NLP mute is disabled
 Echo Cancellation NLP threshold is -21 dB
 Echo Cancel Coverage is set to 128 ms
 Echo Cancel worst case ERL is set to 6 dB
 Playout-delay Mode is set to adaptive
 Playout-delay Nominal is set to 60 ms
 Playout-delay Maximum is set to 1000 ms
 Playout-delay Minimum mode is set to default, value 40 ms 
 Playout-delay Fax is set to 300 ms
 Connection Mode is normal
 Connection Number is not set
 Initial Time Out is set to 15 s
 Interdigit Time Out is set to 10 s
 Call Disconnect Time Out is set to 60 s
 Power Denial Disconnect Time Out is set to 1000 ms
 Ringing Time Out is set to 180 s
 Wait Release Time Out is set to 30 s
 Companding Type is u-law
 Region Tone is set for US
 Analog Info Follows:
 Currently processing none
 Maintenance Mode Set to None (not in mtc mode)
 Number of signaling protocol errors are 0
 Impedance is set to 600r Ohm
 Station name None, Station number None
 Translation profile (Incoming): 
 Translation profile (Outgoing): 
 lpcor (Incoming): 
 lpcor (Outgoing): 
 Voice card specific Info Follows:
 Signal Type is loopStart 
 Battery-Reversal is enabled
 Number Of Rings is set to 1
 Supervisory Disconnect is signal
 Answer Supervision is inactive
 Hook Status is On Hook
 Ring Detect Status is inactive
 Ring Ground Status is inactive
 Tip Ground Status is inactive
 Dial Out Type is dtmf
 Digit Duration Timing is set to 100 ms
 InterDigit Duration Timing is set to 100 ms
 Pulse Rate Timing is set to 10 pulses/second
 InterDigit Pulse Duration Timing is set to 750 ms
 Percent Break of Pulse is 60 percent
 GuardOut timer is 2000 ms
 Minimum ring duration timer is 125 ms
 Hookflash-in Timing is set to 600 ms
 Hookflash-out Timing is set to 400 ms
 Supervisory Disconnect Timing (loopStart only) is set to 350 ms
 OPX Ring Wait Timing is set to 6000 ms
 Secondary dialtone is disabled

Note

If the FXO port 0/2/0 is disconnected, the output of the show voice port command changes so that the Administrative State remains "UP" but the Operation State is "DOWN." Beginning in Cisco IOS Release 15.1(3)T, there is improved status monitoring of FXO ports--any time an FXO port is connected or disconnected, a message is displayed to indicate the status change. For example, the following message is displayed to report that a cable has been connected, and the status is changed to "up" for FXO port 0/2/0: 000118: Jul 14 18:06:05.122 EST: %LINK-3-UPDOWN: Interface Foreign Exchange Office 0/2/0, changed state to operational status up due to cable reconnection

The table below describes significant fields shown in these outputs, in alphabetical order.