- aaa authentication banner through aaa group server tacacs+
- aaa nas port extended through address ipv6 (TACACS+)
- authentication command bounce-port ignore through auth-type
- clear dot1x through clear eap
- client through crl
- crypto ca authenticate through crypto ca trustpoint
- crypto key generate rsa
- Index
clear dot1x through clear eap
clear dot1x
To clear 802.1X interface information, use the clear dot1x command in privileged EXEC mode.
clear dot1x { all | interface interface-name }
Syntax Description
all |
Clears 802.1X information for all interfaces. |
interface interface-name |
Clears 802.1X information for the specified interface. |
Command Modes
Privileged EXEC
Command History
Release |
Modification |
---|---|
12.3(2)XA |
This command was introduced. |
12.3(4)T |
This command was integrated into Cisco IOS Release 12.3(4)T. |
12.2(25)SEE |
This command was integrated into Cisco IOS Release 12.2(25)SEE. |
12.2(33)SRA |
This command was integrated into Cisco IOS Release 12.2(33)SRA. |
12.2SX |
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware. |
Examples
The following configuration shows that 802.1X information will be cleared for all interfaces:
Router# clear dot1x all
The following configuration shows that 802.1X information will be cleared for the Ethernet 0 interface:
Router# clear dot1x interface ethernet 0
You can verify that the information was deleted by entering the show dot1x command.
Related Commands
Command |
Description |
---|---|
debug dot1x |
Displays 802.1X debugging information. |
identity profile default |
Creates an identity profile and enters identity profile configuration mode. |
show dot1x |
Displays details for an identity profile. |
clear eap
To clear Extensible Authentication Protocol (EAP) information on a switch or for a specified port, use the clear eap command in privileged EXEC mode.
clear eap [ sessions [ credentials credentials-name | interface interface-name | method method-name | transport transport-name ] ]
Syntax Description
sessions |
(Optional) Clears EAP sessions on a switch or a specified port. |
credentials credentials-name |
(Optional) Clears EAP credential information for only the specified profile. |
interface interface-name |
(Optional) Clears EAP credential information for only the specified interface. |
method method-name |
(Optional) Clears EAP credential information for only the specified method. |
transport transport-name |
(Optional) Clears EAP credential information for only the specified lower layer. |
Command Default
All active EAP sessions are cleared.
Command Modes
Privileged EXEC
Command History
Release |
Modification |
---|---|
12.2(25)SEE |
This command was introduced. |
12.4(6)T |
This command was integrated into Cisco IOS Release 12.4(6)T. |
Usage Guidelines
You can clear all counters by using the clear eap command with the sessions keyword, or you can clear only the specified information by using the credentials, interface, method, or transport keywords.
Examples
The following example shows how to clear all EAP information:
Router# clear eap sessions
The following example shows how to clear EAP session information for the specified profile:
Router# clear eap sessions credentials type1
Related Commands
Command |
Description |
---|---|
show eap registrations |
Displays EAP registration information. |
show eap sessions |
Displays active EAP session information. |