PfRv3 Command References

The following tables lists various Cisco IOS commands that are used for PfRv3 along with the command mode from which they are entered.

Table 1. Configuration Commands for PfRv3

Command mode

Command name

Description

Interface configuration

bandwidth bandwidth-value

Configures inherited and received bandwidth values for the tunnel interface. The bandwidth value is in kilobits and the valid values are 1 to 10000000.

Border configuration

border

Defines a device as a border.

Domain master controller configuration

branch-to-branch

Disable branch to branch PfR optimization. This is configured on Branch Masters.

Note 

Configuring the command results in two different bahaviors for the different releases. See, PfRv3 Command Reference guide.

Configuration

domain domain name

Configures a top level domain for PfRv3.

Configuration interface

domain domain name path path-name

Configures a path for the domain for PfRv3.

Global configuration

domain domain name path path-name path-id path-id

Configures a path and path-id for a specified domain.

Global configuration

domain path isp-name zero-sla

Configures Zero SLA on tunnel interface for an ISP path.

Master controller configuration

hub ip-address

Configures an IP address for the hub.

Domain class configuration

match {application | dscp}

Specifies applications or DSCP policies to be associated with a class.

Master controller configuration

master ip-address

Configures an IP address for the master controller.

Domain VRF configuration

master {hub | branch | transit}

Defines a device as a master type. You can configure a master device as a hub, border, or a transit.

Domain VRF configuration

master transit pop-id

Configures an ID for the master transit branch.

Domain-class configuration

path-preference path-name fallback path-name

Specifies a path preference for a traffic class policy.

Master controller class type

priority priority-number [jitter | loss | one-way-delay] threshold thershold-value

Specifies threshold values for user-defined policies.

Domain configuration

vrf vrf- name

Configures a Virtual Routing and Forwarding (VRF) instance for a domain.

Table 2. Show Commands for PfRv3

Command mode

Command name

Description

Privileged EXEC

show domain domain-name border peering

Displays the border router peering status.

Privileged EXEC

show domain domain-name border pmi | begin prefix-learn

Displays the automatically learned site- prefix status information of the hub-border router.

Privileged EXEC

show domain domain-name border status

Displays the status of the border routers configured at the hub site.

Privileged EXEC

show domain domain-name border site-prefix

Displays the site-prefix status information of the hub- border router.

Privileged EXEC

show domain domain-name border channels

Displays channel information from the hub-border site.

Privileged EXEC

show domain domain-name border parent route

Displays the parent route information of a border channel.

Privileged EXEC

show domain domain-name border channels parent route

Displays the parent route information of a channel.

Privileged EXEC

show domain domain-name master exits

Displays the summary of the external interfaces configured at the hub site.

Privileged EXEC

show domain domain-name master peering

Displays the peering information of the hub-master controller.

Privileged EXEC

show domain domain-name master discovered-sites

Displays branch sites that are remotely connected to the hub site.

Privileged EXEC

show domain domain-name master site-prefix

Displays the site-prefix status information of the hub- master controller.

Privileged EXEC

show platform pfrv3 rp active smart-probe

Displays the PfRv3 smart probe status on a Cisco ASR 1000 Series Aggregation Services Router configured at the hub site.

Privileged EXEC

show platform pfrv3 fp active smart-probe

Displays the PfRv3 active smart probes status of a embedded-service-processor on Cisco ASR 1000 Series Aggregation Services Routers.

Privileged EXEC

show platform hardware qfp active feature pfrv3 client global pfrv3-instance detail

Displays the platform hardware information on a Cisco ASR 1000 Series Aggregation Services Routers.

Privileged EXEC

show flow monitor type performance-monitor

Displays the flow monitor information for passive performance monitoring on the egress interface of WAN.

Privileged EXEC

show domain domain-name master traffic-classes summary

Displays the summary information of all the traffic classes.

Privileged EXEC

show domain domain-name master traffic-classes

Displays the status information of the traffic class for the hub-master controller.

Privileged EXEC

show domain domain-name master traffic-classes policy policy-name

Displays the occurrence of performance issues in a policy traffic class.

Privileged EXEC

show domain domain-name master channels

Displays channel information from the hub site.

Privileged EXEC

show domain domain-name master channels link-name path-name

Displays channel status information and the unreachable threshold crossing alerts (TCA) and on demand export (ODE) instances on a hub-master controller.

Privileged EXEC

show domain domain-name master channels dst-site-id destination-site-id

Displays the details of destination site-ids configured with hub-master controller.

Privileged EXEC

show domain domain-name default master site-capability

Displays the capability information of master controller.

Table 3. Debug Commands for PfRv3

Command mode

Command name

Description

Privileged EXEC

debug platform hardware qfp active feature pfrv3 client

Enables PfRv3 Cisco Quantum Flow Processor (QFP) client debug logging.

Privileged EXEC

debug platform hardware qfp active feature pfrv3 datapath

Enables PfRv3 Cisco Quantum Flow Processor (QFP) data path debug logging.

Privileged EXEC

debug platform hardware qfp active feature pfrv3 pal

Enables debug logging for PfRv3 in the Cisco Quantum Flow Processor (QFP).

Privileged EXEC

debug platform software pfrv3

Enables PfRv3 platform debug commands.