Cisco Multi-Site Hardware Requirements Guide, Release 3.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: January 7, 2021

Chapter: Hardware Requirements for DCNM Fabrics

Hardware Requirements for DCNM Fabrics
Hardware Requirements For DCNM Fabrics

Hardware Requirements for DCNM Fabrics

Hardware Requirements For DCNM Fabrics

Spine Switch Requirements

The following table summarizes the hardware requirements for EVPN Multi-Site Architecture:

Cisco Nexus 9300 EX platform
Cisco Nexus 9300 FX platform
Cisco Nexus 9300 FX2 platform
Cisco Nexus 9300-GX platform
Cisco Nexus 9332C platform
Cisco Nexus 9364C platform
Cisco Nexus 9500 platform with X9700-EX line card
Cisco Nexus 9500 platform with X9700-FX line card

The hardware requirements for the site-internal BGP Route Reflector (RR) and VTEP of a VXLAN BGP EVPN site remain the same as those without the EVPN Multi-Site Border Gateways (BGW). This document does not cover the hardware and software requirements for the VXLAN EVPN site-internal network.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)