J Commands

job name

To assign a job to a command schedule, use the job name command. To remove the job, use the no form of the command.

job name job-name

no job name job-name

Syntax Description

job-name

Specifies the job name for the command schedule to run.

Command Default

None.

Command Modes


Scheduler schedule configuration submode.

Command History

Release

Modification

2.0(x)

This command was introduced.

Usage Guidelines

To use this command, the command scheduler must be enabled using the scheduler enable command.

You can configure multiple jobs in a command schedule.

Examples

The following example shows how to specified the job for a command schedule:


switch# config terminal
switch(config)# scheduler schedule name MySchedule
switch(config-schedule)# job name MyJob