Supported Packages and System Requirements

Memory Requirements


Note


Memory is not configurable for the Cisco Remote PHY Shelf 7200 Software 1.3.
Table 1. Memory Recommendations for the Cisco Remote PHY Shelf 7200 Software 1.3

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

FCC

LS1043A

HA-SHELF-V1-3.itb

2GB

Bootflash:

RPD LC

LS1088

HA-SHELF-V1-3.itb

8GB

Bootflash:

Determining the Software Version

To determine the version of the Cisco Remote PHY Shelf 7200 Software 1.3 running on your Cisco Remote PHY Shelf 7200 device from FCC, LC, eRPD, and CMTS, log in and enter the show version EXEC command:


HA-Shelf-FCC#show version
Cisco HA-Shelf Software, version v1.3, build by HA-Shelf-release, on 2020-12-15 09:36:33
Branch information:
FCC branch: (HEAD detached at HA-SHELF_V1_3_20201215)
OpenRPD branch: (HEAD detached at HA-SHELF_V1_3_20201215)


Slot-1#show version
Cisco HA-Shelf Software, version v1.3, build by HA-Shelf-release, on 2020-12-15 09:36:34
Branch information:
Linecard branch: (HEAD detached at HA-SHELF_V1_3_20201215)
OpenRPD branch: (HEAD detached at HA-SHELF_V1_3_20201215)


eRPD-5/1#show version
Cisco HA-Shelf Software, version v1.3, build by HA-Shelf-release, on 2020-12-15 09:36:34
Branch information:
Linecard branch: (HEAD detached at HA-SHELF_V1_3_20201215)
OpenRPD branch: (HEAD detached at HA-SHELF_V1_3_20201215)

GMM#show cable rpd badb.ad17.60c1 sw-version
Load for five secs: 22%/4%; one minute: 26%; five minutes: 26%
Time source is NTP, 15:58:23.873 CST Mon Dec 21 2020
 
RPD ID          SwVersion
badb.ad17.60c1  v1.3