Fixed domains and country codes (ROW)

Configure and Verify Country Code using CLI

To configure country code for the Rest of the World (ROW) domain, use the following CLI command:

Device# configure countrycode [countrycode]
Example: 
Configure countrycode GB

The above CLI reports an error if the configured country code is not included in the ROW and the wireless interface does not work correctly if the country code is not configured.


Note

Reboot the device before configuring other wireless parameters such as frequency, channel width, and after configuring country code. Setting the country code is only applicable for access points with the ROW domain, such as IW9167EH-ROW.

To verify status of country code, use the following show command:
Device# show version | in Product
Product/Model Number: IW9167EH-ROW
To verify status of ROW country code, use the following show command:
Device# show dot11Radio <interface> config
Example:
Device# show dot11Radio 1 config
…….
DFS region : GB
DFS radar role : auto
Radar Detected : 0
Indoor deployment: disable

Configure country code using GUI

Wireless interfaces fail to work if country code is not configured. To configure the country code:

  1. In the GENERAL SETTINGS, click wireless radio.

  2. For ROW domain, if the country code is not selected, the following pop-up appears:

  3. To select a country code, click the pop-up in the above image then it redirects to the Wireless Settings section. In the Wireless Settings section, choose country from the drop-down list.

    A confirmation pop-up appears.

  4. Click Confirm.

    A reboot confirmation screen appears.

  5. Click Yes.

  6. In the MANAGEMENT SETTINGS, click status.

    In the STATUS page, check the details of operating region and country for confirmation.

  7. To establish a wireless connection between devices, set the same operating frequency in radio devices.


    Note

    Shared Passphrase must be same for all the devices belonging to the same network.

    Following image shows the configuration of country code using GUI:

Support fixed domains and country codes (ROW)

The ROW reg domain simplifies the domain management of the manufacturing process for all the country codes that do not have a specific domain mapped. The fixed domain and country code support for the Catalyst IW9167E, IW9165E, and IW9165D access points are described in this section.

You are responsible for ensuring APs approval for use in your country. To verify approval and to identify the regulatory domain associated with a particular country. For more information, see Cisco Product Approval Status.

Catalyst IW9167E supported fixed domains

Domain

Indoor Deployment Support

A

No

B

N/A

E

Yes

F

No

Q

No

Z

No

Note

Outdoor and indoor frequencies are same for the B domain.

Catalyst IW9167E supported country codes (ROW)

Domain ROW Country Code

Indoor Deployment Support

Support Version

VN (Vietnam)

N/A

17.11.1

GB (Great Britain)

Yes

17.11.1

KR (Korea)

No

17.12.1

IN (India)

No

17.12.1

PE (Peru)

No

17.12.1

PH (Philippines)

No

17.12.1

ZA (South Africa)

No

17.13.1

AR (Argentina)

No

17.13.1

HK (Hong Kong)

No

17.13.1

PK (Pakistan)

No

17.13.1

UY (Uruguay)

No

17.13.1

CO (Colombia)

No

17.13.1

BR (Brazil)

No

17.13.1

CN (China)

No

17.13.1

EC (Ecuador)

No

17.13.1

IQ (Iraq)

No

17.13.1

SG (Singapore)

No

17.13.1

SA (Saudi Arabia)

No

17.13.1

QA (Qatar)

No

17.13.1

MX (Mexico)

No

17.13.1

TH (Thailand)

No

17.13.1

CL (Chile)

No

17.13.1

TW (Taiwan, Republic of China)

No

17.13.1

AE (United Arab Emirates)

No

17.13.1

EG (Egypt)

No

17.15.1

MY (Malaysia)

No

17.15.1

MN (Mongolia)

No

17.15.1

DZ (Algeria)

No

17.16.1

BS (Bahamas)

No

17.16.1

CR (Costa Rica)

No

17.16.1

NG (Nigeria)

No

17.16.1

PA (Panama)

No

17.16.1

Note

You can select only the listed country codes using CLI or GUI.

For ROW domain, select the country code for the device to work.

IS (Iceland) and MC (Monaco) are supported using -E domain.

Catalyst IW9165E Supported Fixed Domains

Domain

Indoor Deployment Support

A

Yes

B

N/A

E

Yes

Z

Yes

Q

Yes

F

Yes

Note

Outdoor and indoor frequencies are same for B domain.

Catalyst IW9165E supported country codes (ROW)

Domain ROW Country Code

Indoor Deployment Support

Support Version

GB (Great Britain)

Yes

17.12.1

ZA (South Africa)

Yes

17.13.1

IN (India)

Yes

17.13.1

KR (Korea)

Yes

17.13.1

PE (Peru)

Yes

17.13.1

AE (UAE)

Yes

17.13.1

MX (Mexico)

Yes

17.13.1

BR (Brazil)

Yes

17.13.1

CL (Chile)

Yes

17.13.1

SA (Saudi Arabia)

Yes

17.13.1

PH (Philippines)

Yes

17.13.1

QA (Qatar)

Yes

17.13.1

SG (Singapore)

Yes

17.13.1

LK (Sri Lanka)

Yes

17.13.1

TH (Thailand)

Yes

17.13.1

VN (Vietnam)

Yes

17.13.1

TW (Taiwan, Republic of China)

Yes

17.14.1

EG (Egypt)

Yes

17.15.1

MY (Malaysia)

Yes

17.15.1

AR (Argentina)

Yes

17.15.1

CN (China)

Yes

17.15.1

CO (Colombia)

Yes

17.15.1

EC (Ecuador)

Yes

17.15.1

HK (Hong Kong)

Yes

17.15.1

DZ (Algeria)

No

17.16.1

BH (Bahrain)

No

17.16.1

CR (Costa Rica)

No

17.16.1

IQ (Iraq)

No

17.16.1

MN (Mongolia)

No

17.16.1

PK (Pakistan)

No

17.16.1

PA (Panama)

No

17.16.1

Note

You can select only the listed country codes using CLI or GUI.

For ROW domain, select the country code for the device to work.

Catalyst IW9165D supported fixed domains

Domain

Indoor Deployment Support

A

No

B

N/A

E

Yes

Z

No

Q

No

F

No

Note

Outdoor and indoor frequencies are same for the B domain.

Catalyst IW9165DH supported country codes (ROW)

Domain ROW Country Code

Indoor Deployment Support

Support Version

GB (Great Britain)

Yes

17.12.1

ZA (South Africa)

No

17.13.1

IN (India)

No

17.13.1

KR (Korea)

No

17.13.1

PE (Peru)

No

17.13.1

AE (UAE)

No

17.13.1

MX (Mexico)

No

17.13.1

BR (Brazil)

No

17.13.1

CL (Chile)

No

17.13.1

SA (Saudi Arabia)

No

17.13.1

PH (Philippines)

No

17.13.1

QA (Qatar)

No

17.13.1

SG (Singapore)

No

17.13.1

LK (Sri Lanka)

No

17.13.1

TH (Thailand)

No

17.13.1

VN (Vietnam)

No

17.13.1

TW (Taiwan, Republic of China)

No

17.14.1

EG (Egypt)

No

17.15.1

MY (Malaysia)

No

17.15.1

AR (Argentina)

No

17.15.1

CN (China)

No

17.15.1

CO (Colombia)

No

17.15.1

EC (Ecuador)

No

17.15.1

HK (Hong Kong)

No

17.15.1

DZ (Algeria)

No

17.16.1

CR (Costa Rica)

No

17.16.1

IQ (Iraq)

No

17.16.1

MN (Mongolia)

No

17.16.1

PK (Pakistan)

No

17.16.1

PA (Panama)

No

17.16.1

Note

You can select only the listed country codes using CLI or GUI.

For ROW domain, select the country code for the device to work.