Interface and Hardware Component Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 24.1.x, 24.2.x, 24.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 4, 2024

Chapter: New and Changed Feature Information

New and Changed Feature Information
Interface and Hardware Component Features Added or Modified in IOS XR Release 24.x.x

New and Changed Feature Information

This chapter lists all the features that have been added or modified in this guide. The table also contains references to these feature documentation sections.

Interface and Hardware Component Features Added or Modified in IOS XR Release 24.x.x

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
1x10GbE Breakout Ports on Cisco ASR 9903 Router and Cisco A9K-20HG-FLEX-SE Line Cards	This feature was introduced.	Release 24.3.1	How to Configure Interfaces in Breakout Mode

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)