The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A license is required for all features except for sample plan files used in the WAE Design application. If you have questions about obtaining a license, contact your Cisco support representative or system administrator.
There are three methods of installing a license, and the method used depends on the type of license you are installing.
Note All instructions and examples assume you used /opt/cariden
as the default installation directory. If you did not, substitute your installation directory for /opt/cariden
.
The CLI gives you the option to store the license file in one of three locations:
Both the WAE Design GUI and the web UI put licenses only in $HOME/.cariden/etc
.
|
|
|
---|---|---|
The FlexNet Publisher license server must be set up (usually by a system administrator). For information on setting up this license server, see WAE Design Floating License Server . |
||
|
|
To use the WAE Design GUI, you need either a dedicated or a floating license. Regardless of the license type or method of installation, you need only install it one time. If it is a floating license, thereafter when you start WAE Design, the floating license will be available for checking out or borrowing.
To verify a license and its features, choose File > License Check.
Note If you have installed a license for use by the WAE Core modules, do not use the overwrite option when installing a WAE Design license.
If you are installing a dedicated license or if you are installing a floating license and you have it downloaded to an accessible device, follow these steps.
Step 1 From the WAE Design GUI, choose File > Install License.
Step 2 Choose From license file.
Step 3 Browse to the location or enter the name of the license file (.lic extension), and click Open.
Step 4 Click OK to confirm the license installation. If there is already a license installed, you are prompted to either merge or replace the existing license. If you are uncertain whether you have a complete set of desired features in the new license, the best practice is to merge the licenses.
If you are installing a floating license from the license server (that is, you do not have the license file), follow these steps.
Best practice: If using Windows, we recommend that you specify the port.
Step 1 Choose Specify license file.
Step 2 Enter both the hostname and the MAC address of the license server. The MAC address must be a 12-digit hexadecimal number without any colon (:) separators.
Step 3 If the port is not specified, ports 27000-27009 are scanned to find the license server port and connect to it. Optionally, you can enter the license server’s TCP port number using a range of 1024 to 65535. The default license server port is 27000.
Step 4 Click OK to confirm the license installation.
If you have installed a floating license, you can borrow a license from the server for up to 30 days. The license is automatically returned to the license server at 11:59 p.m. on the last day (based on the local time on the floating license server).
You must have connectivity to the floating license server to borrow a license or to return it prior to the specified date. Connectivity is not required, however, during the period of time for which you are borrowing the license.
The number of remaining available days for the license is listed under File > License > Borrow. To determine the exact date on which the license will expire, choose File > License > Check.
To borrow a license, follow these steps.
Step 1 From the WAE Design GUI, choose File > License > Borrow.
Step 2 Enter the number of days you want to borrow the license (integer from 1 to 30), and click OK.
To return a borrowed license, follow these steps.
Step 1 From the WAE Design GUI, choose File > License > Borrow.
Step 2 Click OK in the confirmation message.
To determine the number of days before the license expires and the exact date on which the license expires, use the license_check
command.
To borrow a license, use the l icense_borrow
command and specify the number of days (integer from 1 to 30). Example:
license_borrow -num-days 23
To return a license, use the license_return
command. There are no required or optional options.
You can use the CLI to install licenses for all products.
Note If you are installing both a WAE Core and a non-WAE Core license, you must use the default method that merges the licenses. You are given an option on where to put the license. Choose the same location for both licenses.
license_install
tool, passing it the name of the license file (.lic extension). By default, the tool merges the features granted by the new license with those in an existing license. license_install -file
<path>/
<filename>.lic
When prompted, enter the number associated with the directory in which you want to install the license.
By default, when using license_install -file
, the tool merges the features granted by the new license with those in an existing license. If you are using only non-WAE Core licenses, you can overwrite the existing license using the -existing-lic
overwrite option. Before executing this option, be certain that the new license contains all the necessary features because previous features will no longer be available. Do not use this overwrite option if installing licenses for both non-WAE Core and WAE Core.
license_install -file
<path>/
<filename>.lic -existing-lic overwrite
license_install -file acme/setup/MATEDEDICATED12345678910111213.lic -existing-lic overwrite
-server-host
and -server-mac
options. The MAC address must be a 12-digit hexadecimal number without any colon (:) separators.license_install -server-host
<license_server_hostname> -server-mac
<license_server_MAC_address>
If the -server-port
option is not specified, ports 27000-27009 are scanned to find the license server port and connect to it. Optionally, you can enter the license server’s TCP port number using a range of 1024 to 65535. The default license server port is 27000.
license_install -server-host lic.cisco.com -server-mac 1a2b3c4d5e6f -server-port 27000
To verify a license and its features, run the license_check
tool. To see descriptions of the license features, use the -detail
option (which defaults to true
).
license_check -detail
Note Do not use the web UI for WAE Core licenses or stand-alone WAE Design installations.
Step 1 Start the web server if it is not running.
Step 2 Choose System > Licenses.
a. Browse to the location or enter the name of the license file (.lic extension), and click Open.
b. If there is already a license installed, the default is to overwrite the existing license. To merge the two licenses instead, select the merge option. If you are uncertain whether you have a complete set of desired features in the new license, best practice is to merge the licenses.
Step 5 Verify the license installed correctly by locating it on the System > Licenses page.